Ford

Ford Focus ST250 and Focus RS Mk3 Quickshifter and Slop reducing cap Building on a long line of high-performance Quickshifters from Forge Motorsport. Race inspired shifting for your Focus ST250 and RS Mk3 using your Forge adjustable Quickshifter you can adjust the movement required to select each gear.   In addition this Quickshifter kit comes with a slop reducing cap which when fitted over the shift cable knuckle eliminates movement and gives the shift movement a more direct feel. This kit comes with the Forge Pin removal tool.  

Read more less

SIDE SKIRTS DIFFUSERS FORD FOCUS ST fits : Ford Focus mk3 ST version 2010 - Side skirts diffusers fit ESTATE model as well.   COMPLETE SET CONTAINS: - SIDE SKIRTS DIFFUSERS   Product is made from ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Spoiler CAP Ford Focus ST Mk3 / Mk3 FL FITS ONLY:  Ford Focus ST Mk3 Hatchback (2010-2014)Ford Focus ST Mk3 FL Hatchback (2015-2018) Please Note:  ** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. ** COMPLETE SET CONTAINS:-> Spoiler Extension with 3M Tape-> Degreasing Cloth Fitting manuals: SPOILER EXTENSION INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

its : Ford Focus 3 standard version 2010 -   COMPLETE SET CONTAINS: -SPOILER    Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.    This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Please ensure you choose your correct Van to get the correct bulbs for your vehicle! Transit custom Full upgrade kit! This kit is for vans that are NOT Crew Cab The kit includes -H7 Dipped Beam pair -H15 DRL/Main Beam pair -501 Side Light pair -H1 Cornering Light Pair -H11 Fog Light Pair -382 Canbus Free Reverse Light pair -501 Number Plate pair -Cargo Roof Light Pair -Interior Welcome Light front & back -Interior Map Lights front Pair Please note: the full kit comes with number plate bulbs which change the colour from yellow to white - you can add number plate UNITS as an optional extra All exterior bulbs are 6500k pure white. Dipped Beam, Main Beam/DRL, Fog light and cornering lights are ice white halogen - the rest of the kit is LEDInterior bulbs come white as standard, but you can select from a variety of colours, please contact us for info Optionally add ChromoLite Indicators to this kit Save money by buying our full kit in one go! Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Grab a bargain today Please note: General discount codes can not be applied to this item, Unless otherwise Advised!

Read more less

This unit is specific to the Transit Custom It replaces both the factory OEM Unit as well as the bulb inside, you simply plug this unit into where the bulb previously went and slot the unit back into position. The results are superior to any led bulb on the market today. The unit itself is soldered and silicone sealed to stop water ingress (Factory units from ford allow water into the holder, causing a normal led bulb to disintegrate after time) This unit has 18 LED's built into it, Making them upto 12x Brighter than any standard LED on the market today.   Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

Read more less

A blowoff valve (BOV), dump valve or compressor bypass valve is a pressure release system present in most modern OEM road car applications. Its purpose is to prevent compressor surge / stalling and reduce wear on the turbocharger. These control valves remove the damaging impact of ‘surge loading’ by allowing the compressed air to vent  away from the compressor wheel. This discharge can be heard as a distinct ‘dump valve’ hissing sound as it vents to atmosphere or back into the intake depending on the application and ECU airflow regulation. The Fiesta 1.0T Ecoboost uses an inexpensive electronic diverter valve as standard which is prone to failure and inconsistent results when used at higher boost pressure.Plumb Back Kompact Shortie Kit for Ford Fiesta 1.0TStock blow-off valves like those that come standard with the Fiesta 1.0 often suffer from a range of problems. They are plastic, and they leak, and if you want to up the power (who doesn't?) they have trouble holding the extra boost. You’ll have no such troubles with Turbosmart’s Kompact Shortie blow-off valve. Like all Turbosmart blow-off valves, the new Fiesta 1.0 Kompact Shorties have been designed, machined and hand assembled in-house. Keeping the process in-house, ensures only the best quality, and the aircraft grade aluminum alloy construction means cracking and leaking even under increased boost levels will never be an issue. The Fiesta 1.0 Shortie is produced with a light-weight, brass/aluminium, two-piece piston, which is then perfectly matched with precision engineered springs, giving razor sharp valve response, and a serious increase in performance over stock valves.  Will fit both, Fiesta 1.0 Ecoboost and Focus 1.0 Ecoboost.

Read more less

Turbosmart's new Kompact VR09 Dual Port for the 1.0-litre EcoBoost is a billet aluminium replacement for the Fiesta's factory plastic BOV.The Dual Port is a 50-50 recirculation/vent-to-atmosphere valve for that classic vent-to-atmosphere BOV sound at high boost, and quiet operation at low boost. The standard bypass valve on the 1.0-litre EcoBoost engines is a weak, plastic, diaphragm-type valve - a type of valve that has a track record of failures. Turbosmart's billet aluminium replacement is manufactured with precision, designed for unlimited boost holding capability, excellent response times and heavy-duty reliability.The Fiesta's standard valve is controlled by a solenoid, meaning the ECU can decide when to open the valve - meaning it can be used to bleed boost, limiting performance. The Turbosmart VR09 Kit bypasses this solenoid, allowing the BOV/BPV to operate with manifold vacuum, putting control back in the hands of the driver, all with no check engine lights.Installation is straightforward, and the valve is a bolt-on direct replacement for the factory valve. No special tools are required and all necessary hardware is included.The Kompact VR09 is precision machined, hand assembled and individually quality tested in Australia to the highest quality standards.

Read more less

The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.6 Petrol Fiesta Mk7 Zetec models (Except ST) Comes with stainless steel fittings, please choose from plain or logo. Please note, come with full instructions and fittings. Very Basic Mechanical Knowledge needed to fit.

Read more less

The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.25 & 1.4 Petrol Fiesta Mk7 Zetec models Comes with stainless steel fittings, please choose from plain or logo.

Read more less