performance-st180

This Silver Cut 3SDM 0.05 Wheel comes in a 16 by 9 size with a PCD of 4x108 and an offset of 20mmThe 16x9 0.05This wheel can accommodate any Centerbore up to 73.1mm. To ensure a perfect fit, Spigot Rings will be provided to match your car's Centrebore.NOTE: The images provided are generic images for this series of wheel and do not depict a specific size or ofset.

Read more less

Pack of 4 none drill universal canard set with carbon finish  These are the smaller sizes of Canar - for you to create the ultimate look on your vehicle - ideal for the rear of the car or for any small vehicle front Coated with matte black vinyl these give the carbon affect and add a really cost effective race look to any vehicle  The canards come with pre applied 3M scotch tape meaning there is no drilling or screwing required for application.  Heat up the tape and ensure the area is cleaned with IPA or alchohol wipe prior to application for best results 

Read more less

Pack of 6 none drill universal canard set with carbon finish and Gloss Black Finish You get 3 sizes of Canard, with 2 of each size - for you to create the ultimate look on your vehicle Coated with matte black vinyl these give the carbon affect and add a really cost effective race look to any vehicle  The canards come with pre applied 3M scotch tape meaning there is no drilling or screwing required for application.  Heat up the tape and ensure the area is cleaned with IPA or alchohol wipe prior to application for best results 

Read more less

Enhanced Performance Replacement Fiesta ST Air Filter, with a 70mm diameter outlet, suitable for Enhanced Intake Kit for the ST, or as a simple upgrade! It is recommended to purchase a maf housing to work with this filter. Suitable for all the following Cars; Fiesta ST180 181ps Petrol Fiesta ST200 200ps Petrol The replacement Fiesta ST Air Filter is supplied pre-oiled and ready for installation.

Read more less

Fully serviceable and tuneable replacement turbocharger actuator for the Ford Fiesta MK7.5 ST180. If you require this actuator to be assembled with a standard spring suitable for the factory boost level please select Green Stock Vehicle from the drop-down list. If you require a stronger spring please select the required spring in the drop-down menu.Green – Stock SpringPurple – 13 Psi (0.9 bar)Yellow – 15 Psi (1.03 bar)Blue – 18 Psi (1.24 bar)Red – 20 Psi (1.38 bar) Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACST180 Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of 2 gels Covers the chrome surrounds on the air vents Fits the following: Mk6.5 Fiesta (Facelift only) Mk7 & 7.5 Fiesta Mk4 Mondeo (may fit other models with the same vents)

Read more less

Big boost pipe kit for the Fiesta ST 180. The kit includes: 3 hard pipes, 4 Pro Hose silicone hoses & free jubilee clips. This kit is designed for the modified fiesta ST 180. All pipes have swayed  ends to stop the pipes blowing off. Available with or without symposer take off. Please note: If fitting with the AIRTEC Motorsport Stage 2 intercooler, please make a note in the shipping notes – Additional hose required.     2.5" bore pipework. Comes in alloy finish. Will fit Fiesta ST 200

Read more less

The brand new Big Aero wing from Airtec Motorsport is here!   Designed with the help of CEUK based on our MK7 RT330 Track car we are proud to be the first stockist of this amazing item AIRTEC Motorsport Rear Wing for Mk7 Fiesta The kit attaches to the car using our bespoke AIRTEC Motorsport designed brackets, that is bolted to the boot lid. Please note, this requires drilling to your boot lid and should be done by a competent professional. Key features: • Designed and developed in the UK • Tested on track and road with our own Time Attack car • Bespoke laser-cut and powder coated alloy brackets • Unique alloy end plates available in three powder coated colours • High-quality fibreglass centre blade section finished in satin black • Comprehensive fitting kit with all fixtures, fittings, instructions and drilling template Available in a choice of coloured end plates: Gloss Black Race Red Frozen White AIRTEC part no: ATMSFO10 Please note: We endeavour to deliver an extremely high quality product but due to the handmade manufacturing process there is the possibility of minor imperfection(s) on the centre wing blade

Read more less

Suitable for all 3dr MK7 Fiesta ST’s with standard front bumpers. Rear will fit any facelift Fiesta MK7 however front may need a slight adaption by a body shop to fit any “NONE ST’s” These arches are produced to a very high standard and require painting prior to install We HIGHLY recommend these are fitted by a bodyshop. They can be fitted without cutting existing arches, but depending how the car sits depends on the work needed. (Without cutting existing arches, you may not be able to sit as low as you want.)   Registered Design Right number 6012610

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

Reduce your stock shift throws with two different positions, ranging from 15% or 25%. Offering 2-positions truly allows the user more options to fine tune their shift throws! With a quick and easy installation process the stock shift weight does not need to be removed. This saves time and makes the installation quick and easy. Made from CNC machined aluminium with engraved AIRTEC Motorsport logo All hardware is 100% stainless steel including the ball stud. 2-position adjustable between (15% or 25%) reduction Completely reversible Installs in approx. 15 minutes Simple DIY fitting: Remove gear selector cable from original shifter, using long nose pliers or mole grips. Install top section of new short shifter which will locate it’s self due to cut out underneath top section. Then install lower section and new bolts and tighten, simply reconnect gear selector cable. 15% (Lower hole) or 25% (Top hole).

Read more less

AIRTEC Motosport have designed and released a bolt in roll cage for the Ford Fiesta ST180 and ST200 AND MK7 FL - NO drilling or cutting required. Designed primarily for use as a show cage/harness bar, these are a quick and easy fit retaining the use of original M10 seat belt mounting points. Constructed from FIA spec E355+N cold drawn seamless steel, aimed at strengthening and tightening the chassis in a simple and effective manner. No need for any additional mounting brackets to be welded in.

Read more less