Ford Focus MK3

Make your car look wider lower & meaner Win admiration from your fellow enthusiasts Bespoke design and easy to fit Designed  for looks & protection No hassle, No quibble money back guarantee Helps protect from stone chips & avoid expensive re-sprays Only the highest quality materials used Made from 3mm PVC Set of 4 Mudflaps including fixings Easy to follow 'step by step' colour fitting guide  Please note: Rally Flapz are made to order, please allow 5-7 working days.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Ford Focus ST TDCi 5 Door Estate performance exhausts is made in 3"/76.19mm pipework and fits from the centre section backwards replacing the rear section. All relevant fittings and gaskets are supplied. Press Release The 2015 Ford Focus ST TDCI Estate was always on the agenda to lend itself to another of Cobra Sports exhaust upgrades, due to the massive success of the ST250 marques. The Cobra Sport development team recommended 3 inch bore pipework in order to gain the best results with regards to both power and sound. The final development is available as a rear box replacement which enhanced the TDCI engine sound by only 2dB at three quarter revs, but allowed a deeper overall tone. As expected there was an exceptional weight advantage, with the Cobra Sport exhaust being a massive 54% lighter than the original equipment exhaust. The new Focus ST TDCI exhaust has two tailpipe design options, one being the custom designed twin 4.5" x 3" slash cut oval and the other the twin 4 inch inward rolled slash-cut tailpipe. Both designs are available in either highly polished T304 Stainless finish and the TP38 option in ceramic coated matt black.  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Ford Focus ST TDCi performance exhausts is made in 3"/76.19mm pipework and fits from the centre section backwards replacing the rear section. All relevant fittings and gaskets are supplied. Press Release The 2015 Ford Focus ST TDCI was always on the agenda to lend itself to another of Cobra Sports exhaust upgrades, due to the massive success of the ST250 marques. The Cobra Sport development team recommended 3"å� bore pipework in order to gain the best results with regards to both power and sound. The final development is available as a rear box replacement which enhanced the TDCI engine sound by only 2 dB at three quarter revs, but allowed a deeper overall tone. As expected there was an exceptional weight advantage, with the Cobra Sport exhaust being a massive 54% lighter than the original equipment exhaust. The new Focus ST TDCI exhaust has two tailpipe design options, one being the custom designed twin 4.5" x 3" slash cut oval and the other the twin 4" inward rolled slash-cut tailpipe. Both designs are available in either highly polished 304 Stainless finish and the TP38 is also available in ceramic coated matt black. Related Media Files Example of Ford Focus ST 2.0 TDCi Sports Exhaust Cobra Sport Exhausts Ford Promotional Video - Ford Events & BTCC

Read more less

A set of 4 ultra-high performance brake lines for the Ford Focus ST250 Mk3. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit. Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and performing at the highest level. They are available in multiple hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress. Our hoses eliminate all the problems associated with standard OE lines Immediate brake pedal response Lifetime Warranty Choice of colour Reduces pedal sponginess under hard braking Compatible with all brake fluids Will not corrode  

Read more less

Fits: Focus ST250 Mk3 Models: 2012 - 2018 4 Line set Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards    

Read more less

This is a replacement Pipercross filter that fits the FMINDK4 intake. These have been created exclusively for Forge by filtration gurus Pipercross and feature the latest multilayer-foam technology. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates. Best quality guaranteed!

Read more less

Set of 20 genuine ford wheel nuts to replace fatigued or damaged oem nuts Fits most ford models and alloys

Read more less

Forge Motorsport turbo wastegate actuator for the Ford Focus RS Mk3 Produced in house with our modern CNC machinery ensures the body and stainless steel rod with fittings provides a perfectly fitting serviceable and upgradeable replacement part. This wastegate actuator is assembled with a predetermined actuator spring suitable for or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request. Please contact us directly concerning this process and we will be happy to help with your requirement. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure

Read more less

This is a piston design bypass valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified.  * To avoid the possibility of a P0101 trouble code, the ECM must be reprogrammed with a tune optimised for atmospheric discharge. We recommend the tuning services of Trifecta Performance: www.trifectaperformance.com   In The Box:1 x FMDVCS14A Valve1 x Uprated Yellow Spring1 x Forge Sticker

Read more less

Forge Motorsport Boost Tap for the Ford Mustang 2.3 Ecoboost and the Mk3 Focus RS. This adaptor plate is installed between the boost (MAP) sensor and the mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge.   In the box:1 x Vacuum tap1 x Allen Cap Bolt10 x Cable Ties1 x 3000mm of 4mm Vacuum Tube

Read more less

With Forge products the performance and quality always come first and this kit really goes out it's way to prove it. With a re-design of the inlet pipe work in alloy, and teaming up with the engineers at PiperCross, who have become famous for extracting extra horsepower on the British Touring Car circuit, we now have a kit which unleashed an extra 17 hp on our test car. As always we supply everything required for an easy installation. The silicone hose is available in a choice of blue or black, so simply select your choice below in the options, when ordering.

Read more less