Forge Motorsport Shop

Front Replacement Brake discs and bolts Only for use with existing Bell Hats to fit Forge Motorsport Brake kits. 2x 356 x 32 Discs Bolt kit Proprietary iron alloy rotor discs with directional curved vanes for optimized rotor cooling Slotted rotors for dust and gas evacuation adds long term durability Please Note:Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation. ***THE MINIMUM THICKNESS OF THESE DISCS SHOULD BE NO LESS THAN 29mm BEFORE THEY ARE CHANGED*** Please Lock with 14NM   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Front Replacement Brake discs for Forge Motorsport Brake kits. 330 x 32 Discs  Bolt Kit 2-piece floating rotors CNC machined lightweight forged billet aluminium rotor hats/bells Proprietary iron alloy rotor discs with directional curved vanes for optimized rotor cooling Slotted rotors for dust and gas evacuation adds long term durability ***THE MINIMUM THICKNESS OF THESE DISCS SHOULD BE NO LESS THAN 29mm BEFORE THEY ARE CHANGED*** Please Lock with 14NM Please Note:Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Rear replacement brake discs for Forge Motorsport brake kits. 330 x 28 Discs  Bolt Kit 2-piece floating rotors CNC machined lightweight forged billet aluminium rotor hats/bells Proprietary iron alloy rotor discs with directional curved vanes for optimized rotor cooling Slotted rotors for dust and gas evacuation adds long term durability Please Note:Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation. Please Lock with 14NM ***THE MINIMUM THICKNESS OF THESE DISCS SHOULD BE NO LESS THAN 18mm BEFORE THEY ARE CHANGED***   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braided brakes hoses, mountings, and brake pads. This kit is suitable for the VW Mk5 Golf including R32, Golf Mk6/Mk7, Audi A3, TTRS, TTS, VW Scirocco, 2013 model VW Beetle, as long as they are fitted with 18inch or larger wheels. If you are running stock VW wheels, you may need to fit a 5mm spacer in order to clear the back of the spokes. To download our fitment template click here. This brake kit is supplied with either our Forge Ceramic Brake Pads (FMBKPAD) or  EBC Yellow Pads. For further information on EBC pads please see EBC website. Depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers. These kits do not have CE / TUV approval and are recommended for race use only Each Caliper weighs 3.25kg Each Disc weighs 9.35kg Torque Settings: Carrier to Hub 260NM Caliper to Carrier 139NM   Colour Code: Dark Blue- ZAK Beam Blue Download our guide on how to clean and maintain your Forge Motorsport Big Brake Kit Please Note: Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Yet another first for the Volkswagen and Audi Tuning Market from Forge Motorsport! With the introduction of the VAG TSi Turbo Engine, we have developed a Patented Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch engine management systems employed. This is not only a high quality replacement for vehicles fitted with the OEM solenoid valve part number 06F 145 710 D, but will fit earlier applications of the 2.0 FSiT, the later TFSi 2 litre, and the 5 cylinder TTRS..    In The Box:1 x FMDV14T Blow Off Adaptor3 x M6 x 40 Socket Cap Bolts1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

This turbo recirculation valve is the result of of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. The FMDV008PA version seen here has the benefit of a 90 degree vacuum port, that can be rotated to three different orientations. This is often the preference where either space is restricted, or the original fitment valve has a 90 degree connection, either on the valve or connecting hose. Forge's recirculation valve features a greater flow rate than the OEM Bosch Valve, as well as a faster response time, due to our revised design. By using the associated service kit (FMDVSK), as seen below, the life of the valve can be extended, and the performance can be maintained. With a lifetime guarantee, you can be sure the valve is reliable for your car.  It is fully customisable to fit your application with two uprated springs provided in the kit. Forge Motorsport's improvement on the original valve has a compact design, meaning easy fitment under the engine cover. Please select whether you want a black or matt silver valve, using the options above. In The Box:1 x FMDV008PA Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring1 x Cable Tie1 x 2.5mm Allen key2 x 35mm Hose Clamps1 x Instruction Booklet1 x Forge Sticker Click here to see our video on how to service this product *Porsche 991/911 Turbo will require 2 Valves - please see our seperate product (FMDV008P2 below)* The valve has a port size of 25mm If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

The Splitter is a truly remarkable valve that gives a combination of blow off and recirculation valve operation, all at the same time, and has been specifically designed for the many turbo engined applications that operate metered airflow management systems. This means you get all the noise of the blow off valve whilst retaining the compatibility with the recirculation requirements of the engine management system. As a bonus we also offer the ability to convert the valve to recirculation only mode for those times when stealth running is required. This valve uses a Brass piston which utilises new sealing technology along with a variable spring preload, incorporating a ratchet type top adjuster that will allow for the positive and precise adjustment to match the valve to your engine. This is achieved by using a unique single, conical, progressive rate spring, that can allow for the retention of boost pressure over a wide adjustment range. This unique spring design also allows for unrestricted piston travel and flow volume regardless of the amount of pre-load adjustment added to the spring. Other manufacturers' valves use cylindrical springs with adjustable pre-load, which often experience restricted piston travel and a reduction in flow volume. When we say our products are Engineered For Performance, it's not a catchy sales phrase, it's the truth. and we prove it with every product we manufacture. Note: This valve requires installing the opposite way to the original Bosch Valve. This means that the side pipe is fitted into the Turbo Intake Hose, and the base pipe connects to the hose that runs to the boost side of the turbo.   In The Box:1 x FMDVSPLTR Valve1 x Valve Blanking Cap1 x Instruction Booklet1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.  The valve has a port size of 25mm         To service this valve, access the valve piston by removing the 3 cap screws at the base of the valve and simply clean the piston chamber using brake cleaner or similar cleaning fluid before installing the new spring and piston. Please observe the correct spring and piston orientation when installing the serviceable parts, as seen in the attached drawing.   Adjustment guide. First turn the valve adjustment knob all the way down in the anti-clockwise direction, which will adjust the spring it to its lowest tension. Then turn the valve adjustment knob in the clockwise direction to the appropriate tension level, as set out below. Standard engine – 16 clicks. Stage 1 remap – 21 clicks. Stage 2 remap – 25 clicks. These adjustment recommendations are a general guide and you may find that your engine requires fine tuning by 1 or 2 clicks in either direction to achieve optimum performance. There will be no significant performance benefit adjusting the valve over 30 clicks as the spring will have reached its maximum operating tension.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Yellowstuff Fastest Street, Trackday & Drift racing brake pads High friction formula improves brake effect 30-40%.Fastest brake pads for Street, Drift & Trackday racingZero brake fade makes this material perfect for fastest driving.Capable of repeated heavy brake use without brake “Fall-Off”.Very minimal disc/rotor damage characteristics.Suitable for shorter track events and race use.Medium hardness material feels good at pedal.If all you need is stopping power, this is the material choice.ECE R 90 type approved for most cars. Features red “brake in’ surface coating for instant safe braking after install.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. Fits Multiple Vehicle

Read more less

Forge Motorsport CERAMIC road and competition brake pads Engineered to STOP We are pleased to add our own Forge CERAMIC brake pads to our established Forge big brake kits. This is the result of rigorous testing and development alongside one of the industry’s leading OEM and racing brake pad manufactures and suppliers. Featuring advanced material formulations and unique product design. As you would expect from Forge, we are supplying a product that delivers the ideal combination of Ceramic braking Technology aligned with performance, comfort, and reliability. Strength and flexibility – the optimal degree of thermal expansion to prevent stress and surface cracking. Noise prevention – Diagonal design evenly distributes the contact between the pad and disc minimizing noise and judder effect. Unrivalled and sustainable performance and comfort – Designed for low dust, low noise NAO formulation, with no compromise in braking effectiveness throughout the friction lifespan. Consistent stopping power – Tested to provide braking that you can rely on 100% of the time, in all road and track conditions  Long lasting quality – A new generation of CERAMIC component material, engineered for excellent wear characteristics and maximum replacement intervals. Please note the higher the figure (rating) on the above graphic the better the performance.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Covers Multiple Vehicles

Read more less

Secondary air injection system blanking plate.  Manufactured from high quality aluminium and supplied with Viton O ring and stainless steel bolts. Fitting this plate allows for elimination of the secondary air injection system on the VAG petrol 1.8T.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Cars

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. ·       Stainless Steel Rivets·       Stainless Steel Fasteners·       Carbon fabric Outer Shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature silica fabric The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers: T4 T5 T25 The Garrett GTX28 and GTX30 Range Borg Warner EFR6258 Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less