Reduce weight. Reduce heat. Go Faster. Stop Faster!
ECS Tuning engineered 2-Piece semi-floating rotors offer real world benefits that can be felt on both the street and track! Our 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The 30% reduction of unsprung weight by (7.5 pounds per rotor) improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling.
Features include:
- Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion resistant.
- Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat.
- 2-Piece construction: Conventional rotors are unable to cope with the stress of drastic heat fluctuations and are prone to warping. ECS 2-Piece semi-floating rotors allow the radial expansion of the rotor ring - preventing warping.
- Heat treated: Heat treating further reduces the tendency for rotor cracking by reducing internal rotor stresses.
- Directionally veined: Conventional R32/Golf R rotors are straight-veined, and rely on an inefficient centrifuge-like effect to evacuate hot air from within the rotor. ECS 2-Piece rotors feature curved, directional veins that accelerate air away from the rotor at a higher velocity, leading to consistent, rapid cooling.
- Drilled and slotted: 2-Piece rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors.
- Overall weight savings: This particular ECS 2-Piece rotor weighs only 18.75 lbs compared to a stock R32/Golf R rotor 26.6 lbs. Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance.
- Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily.
- Includes ECS Stainless Rotor Set Screws to eliminate rusty factory fasteners
Ready for a replacement set of rotors? ECS offers discounts on pairs of replacement rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information.
*** ECS does not recommend disassembling the two piece rotors***
This Part Fits the Following Vehicles
| Make |
Model |
Submodel |
Engine |
| Audi |
A3 8P |
FWD |
2.0T |
| Audi |
A3 8P |
FWD |
TDI |
| Audi |
A3 8P |
Quattro |
2.0T |
| Audi |
A3 8P |
Quattro |
3.2L |
| Audi |
A3 8P |
Quattro |
V6 3.2L |
| Volkswagen |
Beetle |
All |
2.0T |
| Volkswagen |
Beetle |
All |
TDI |
| Volkswagen |
CC |
4Motion |
VR6 |
| Volkswagen |
Golf R |
All |
2.0T |
| Volkswagen |
Golf V |
All |
2.0T |
| Volkswagen |
Golf V |
All |
2.5 |
| Volkswagen |
Golf VI |
All |
2.0T |
| Volkswagen |
Golf VI |
All |
2.5 |
| Volkswagen |
Golf VI |
All |
TDI |
| Volkswagen |
Jetta V |
All |
2.0T |
| Volkswagen |
Jetta V |
All |
2.5 |
| Volkswagen |
Jetta V |
All |
TDI |
| Volkswagen |
Jetta VI |
Sedan |
1.4T Hybrid |
| Volkswagen |
Jetta VI |
Sedan Facelift |
1.4T Hybrid |
| Volkswagen |
Jetta VI |
Sedan |
1.8T Gen3 |
| Volkswagen |
Jetta VI |
Sedan Facelift |
1.8T Gen3 |
| Volkswagen |
Jetta VI |
Sedan |
2.0 |
| Volkswagen |
Jetta VI |
Sedan Facelift |
2.0L |
| Volkswagen |
Jetta VI |
Sedan |
2.5 |
| Volkswagen |
Jetta VI |
Sportwagen |
2.5 |
| Volkswagen |
Jetta VI |
Sedan |
GLI |
| Volkswagen |
Passat B6 |
4 Motion |
3.6L |
| Volkswagen |
R32 MKV |
All |
3.2 |
*The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
