All

The 034Motorsport Rear Trailing Arm Spherical Bearing Upgrade Kit is designed to replace the factory rubber bushings, resulting in improved handling, and more predictable and precise cornering. Factory rubber rear trailing arm bushings deflect under load, causing the rear end to feel vague and loose, as well as leading to improper suspension geometry and increased understeer. This becomes especially apparent when cornering on uneven surfaces, where the back of the car can feel floaty or unpredictable. The same exact rubber bushing was used by Audi/Volkswagen on a variety of applications, from the Volkswagen Golf to the Audi RS3, leaving much to be desired by enthusiasts and competitive drivers alike.  This kit replaces the rubber bushings with motorsport-quality Aurora Spherical Bearings, which allow for proper articulation without any deflection, ensuring precise handling, and confidence-inspiring road feel. Unlike polyurethane bushings, spherical bearings allow for full suspension articulation without binding, while completely eliminating slop from bushing flex.  Features: Fully Assembled with New Factory Steel Trailing Arms - Simple Bolt-In Installation! Genuine Aurora Spherical Bearings Featuring Teflon Race Lining Billet Aluminum Bearing Holders - Anodized Black Stainless Steel Bearing Spacers Improved Handling & Road Feel More Precise & Predictable Handling Fully Rebuildable Fitment: Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Shop By Car/Volkswagen/Golf Mk7/Control Arms Shop By Car/Audi/A3 (8V 12-20)/Control Arms Shop By Car/Audi/RS3 (8V)/Control Arms Shop By Car/Audi/S3 (8V)/Control Arms Shop By Car/Audi/TT Mk3 (8S)/Control Arms Shop By Car/Audi/TT RS (8S)/Control Arms Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Control Arms Shop By Car/Skoda/Octavia Mk3 (5E)/Control Arms Replaces:  5QM505223  5QM 505 223 5QM505224  5QM 505 224 5Q0505541A  5Q0 505 541 A Installation Instructions: Click Here! Please Note: We recommend getting an alignment to factory specifications after installing the 034Motorsport Rear Trailing Arm Spherical Bearing Upgrade Kit.

Read more less

The X34 Carbon Fiber Audi MQB Cold Air Intake System for 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R equipped with 1.8T/2.0T Gen 3 engines has arrived! Offering dyno-proven peak gains of up to 15 crank horsepower and 12 ft-lbs of torque on a completely stock vehicle, and over 30 crank horsepower and 25 ft-lbs of torque on vehicles equipped with Stage 1/2 Performance Software, the X34 Intake System is the ultimate induction solution for your Audi or Volkswagen.034Motorsport’s engineers thoroughly evaluated the factory airbox design to create a performance replacement that reduces pressure drop in the intake tract, while offering OEM+ fit and finish. The result is this complete one-piece MQB Carbon Fiber Air Intake Upgrade, which offers 100% bolt-on installation without the need for any additional pieces.   FITS: Shop By Car/Audi/S3 (8V)/Induction Kits Shop By Car/Volkswagen/Golf Mk7/Induction Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Induction Kits Shop By Car/Audi/A3 (8V 12-20)/Induction Kits Shop By Car/Audi/TT Mk3 (8S)/Induction Kits Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Induction Kits

Read more less

The X34 Carbon Fiber MQB Open-Top Cold Air Intake System for 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R equipped with 1.8T/2.0T Gen 3 engines has arrived! We listened to customer feedback and this open-top design allows more intake tract sounds to be heard at a louder volume. Offering dyno-proven peak gains of up to 15 crank horsepower and 12 ft-lbs of torque on a completely stock vehicle, and over 30 crank horsepower and 25 ft-lbs of torque on vehicles equipped with Stage 1/2 Performance Software, the X34 Intake System is the ultimate induction solution for your Audi or Volkswagen.034Motorsport’s engineers thoroughly evaluated the factory airbox design to create a performance replacement that reduces pressure drop in the intake tract, while offering OEM+ fit and finish. The result is this complete one-piece MQB Carbon Fiber Air Intake Upgrade, which offers 100% bolt-on installation without the need for any additional pieces.What's Included?  034Motorsport Carbon Fiber MQB Open-Top Cold Air Intake System 034Motorsport Double-Layer Pleated Cotton Air Filter Integrated SAI Adapter Fitting Installation Hardware FITS: Shop By Car/Audi/S3 (8V)/Induction Kits Shop By Car/Volkswagen/Golf Mk7/Induction Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Induction Kits Shop By Car/Audi/A3 (8V 12-20)/Induction Kits Shop By Car/Audi/TT Mk3 (8S)/Induction Kits Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Induction Kits

Read more less

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime. The larger 048 actuator service kit contains a replacement diaphragm and blue spring retaining dome.

Read more less

Product Description If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime. The diaphragm actuator service kit contains a replacement diaphragm, vacuum port, and blue spring retaining dome.

Read more less

1.0 EcoBoost Crossover pipe - Fiesta Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket! Want it fitted by CEUK? We can fit the Hose And/Or Induction kit from £25 + Vat - give us a call on 0843 289 0182 to arrange. The new CEUK 1.0 Crossover pipe sits between the primary and secondary induction hose on the  cylinder 1.0 engine, and allows more air to pass around your intake system thus giving more power  Improved induction sound as you will hear the air passing through when accelerating and will assist giving a greater blow off sound from your induction kit Features: Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Optional CEUK Logo in numerous colours Fits all Fiesta Mk7/7.5 and Focus MK3 1.0 Eco Boost 100 ps and 125ps, 140ps models  Have you been #Enhanced?

Read more less

Description The Brand New CEUK Stage 2 Enhanced Intake system that works perfectly with the standard 1.0L 100ps, 125ps & new 140ps Fiesta EcoBoost. Expect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And only £132.50!! Easy fitting, takes less than 15-20 minutes to install Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee Features: - CEUK “C” Logo To allow air into the filter   - Removes ugly original plastic & restrictive airboxAdds power and torque - more responsive and exciting driving experience - #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') What’s Included? 1x CEUK #Enhanced Filter Cage 1x Car Specific MAF Duct 1x Free Flowing Cotton Air Filter 1x Fitting Kit! Guarantee Lifetime Warranty and Guarantee on all Enhanced Intake Systems  

Read more less

Description #Enhance your MK Fiesta 1 Litre EcoBoost with the Enhanced Performance stage  hardware kit Featuring everything needed to take your car from #ZeroToHero you can make your baby boost a true pocket rocket Hoses, Crossover Logo and Intercooler {if selected} logo will all be supplied in the colour you choose on the drop down. Save money by buying the kit together   Whats Included 1 x Enhanced Intake Kit 1 x CEUK Primary Induction Hose 1 x CEUK Crossover Pipe 1 x CEUK Secondary Induction Hose 1 x CEUK Turbo Hard Pipe 1 x CEUK Intercooler Hose Kit Optional Extras AirTec Stage 2 Intercooler {Supplied Black with same colour Logo as hoses unless otherwise specified} Milltek Turbo Back Exhaust with Cat and Cat Back Delivery We aim to have all the items with you within 7 working days, in some very rare cases this may take upto a fortnight. Some items may be sent seperately in seperate packages due to size

Read more less

Enhanced Performance Turbo Hard pipe for all models of 1.0 EcoBoost A high flow turbo pipe, improving pressure drop across the charge system which in turn improves the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel, this pipe comes off the turbo and connects to the charge silicone hose going to the intercooler. Compatible with the following models: Fiesta MK7 1.0 EcoBoost 100ps Fiesta MK7 1.0 EcoBoost 125ps Fiesta MK7 1.0 EcoBoost 140ps Focus MK3 1.0 EcoBoost 100ps Focus MK3 1.0 EcoBoost 125ps Focus MK3 1.0 EcoBoost 140ps Fiesta MK8 1.0 EcoBoost 100ps Fiesta MK8 1.0 EcoBoost 125 ps Fiesta MK8 1.0 EcoBoost 140ps

Read more less

Please note: Will not fit september 2020 models onward as ford have changed the engine! Description The Fully Re-Designed Intake Kit from Enhanced Performance adds both performance and visual beauty to your MK8 Fiesta 1.0 EcoBoost Expect to see gains of around 5-10BHP from stock, this kit will also function exceptionally along side any stage 2 remap. You can also run this induction kit on a fully standard EcoBoost with no issues! Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features Removes ugly original plastic & restrictive airbox. Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Cone Airfilter CNC sensor boss Powder coated alloy heat-shield with C Performance logo laser cut into it. Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install (See guide here) Whats in the kit? 1x Enhanced Performance MK8 Heat shield powder coated black 1x CNC Sensor Tube 1x Choice of Cone Air Filter 1x Fitting Kit Warranty 12 months as standard! Videos Induction Kit Whilst Driving

Read more less

*Before purchase and to ensure compatibility please check that your intake configuration is the same as the photograph at the end of the text. Please note this product does not fit the Golf GTE Model, Please see FMINDK14-GTE.  This product is ideally fitted in conjunction with the product FMDV1 (1.2/1.4 TSI Dump valve and fitting kit). If purchased as a stand-alone product the turbo inlet hose will push up against the adjacent OE charge pipe, and a trim to the turbo inlet leg of the FMINDK14 induction hose may be required to avoid creasing. Highlights Part of the Forge Motorsport Hi-Flow range Increases air flow and improves efficiency and performance Up to 10 BHP gain Strong, tight carbon fibre weave Made from 100% carbon fibre with no fibre glass added Formed by Autoclave Pre Preg Easy installation Flurosilicone lined hose High flow cleanable airfilter with no need to ever replace Includes our Forge Motorsport Limited Lifetime Warranty This is the second product to be released in our new ‘Hi-Flow’ range. With this unique sleek design, you can expect to see a carbon fibre housing that flows beautifully along the engine bay, giving you more horse power and torque, and hopefully an appreciation for the care and time that has gone into the production. It includes a billet machined coupler made to exact tolerances at our machine shop in Gloucester, UK, ensuring a perfect fit. The hose is available in red, blue or black and is supplied with all necessary hose clamps.     The Design Following the success of our carbon fibre intake for the Mk7 Golf we knew that we wanted to continue with our ‘Hi-Flow’ range and bring out an affordable option to the 1.4 TSI market. We conducted intense market research, speaking to tuners and owners of the vehicles we wanted the intake to fit. We concluded that rather than creating an entire carbon fibre intake system, the best product to create would be a carbon fibre scoop and airbox lid that fits with original airbox. With this idea in mind we started the design. Using industrial foam and aluminium the concept design was created.  With these components, we could identify the best way to fit the scoop, join it to the air box and mount it to the vehicle. Once the first concept was completed our engineers used the latest technology to create a 3D rendering of how we wanted the intake to look.  Throughout the drawing process we ran simulated air flow tests, this way we could ensure that we would create a product with the most efficient flow possible. The carbon fibre prototype was made and fitted to the vehicle. The design is one of the most aesthetically pleasing and practical on the market To ensure we deliver the best quality product we could and following the extensive design and development of this intake, we enlisted the services of one the world’s leading Carbon fibre manufacturers, who’s products range from F1 aero, carbon fibre car bodies and aircraft wings! Tooling was then CNC machined from billet aluminium to ensure the finished product was flawless. This enables us to create a perfect airbox using the autoclave technique during the manufacturing process of the 2x2 twill carbon fibre. Rather than using a vacuum (also known as liquid infusion) to draw the resin through the mould then pulling the raw carbon fibre cloth to the mould shape, a technique known as Autoclave is used in the manufacturing of this beautifully designed product. This involves the use of up to 10 bar of pressure that is blown into a 100% billet mould to force it out. This high amount of pressure ensures the material is fully in contact with the surface of the mould.  Therefore, making sure the weave is tight, solid and strong, this process also ensures there are no imperfections in the product. The mould is then heated to cure the resin which in turn gives a tensile strength up to eight times stronger than mild steel but at a fraction of the weight. Having spent so much time on the carbon and silicone development we then turned to the equally important aspect of filtration.     Going with the Flow With the lid and scoop design completed we moved on to the hose and filter.  There is no point creating such an efficient system for it then to be restricted by the OEM hose and filter.  Therefore, for the filter we engaged our partners and experts in Filtration Control, Pipercross! With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided, flows 30% more air than stock and fits snuggly within the housing. This combination is second to none. The Forge Motorsport high flow intake hose that is mated to the carbon airbox eliminates the highly restrictive plastic and noise restricting inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification. The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.     In the Box: 1x Forge Motorsport Hi-Flow, carbon fibre airbox lid1x Forge Motorsport Hi-Flow, carbon fibre front scoop1x Pipercross air filter1x Meguiar’s care pouch and Forge Motorsport Micro Fibre Cloth1x larger bore high flow Silicone hose1x USB with installation instructions.   *Before purchase and to ensure compatibility please check that your intake configuration is the same as the photograph. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description A replacement high flow performance air filter for our popular FMINDK14 and FMINDK14-GTE induction kits. The filter will also replace the paper element for those wishing to remove the restrictions of the OEM unit. Please watch our video on how to fit an air filter without damaging it.

Read more less

Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 (coming soon) certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description *Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles* Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*  

Read more less

Product Description 102-76mm Reducing Elbow Silicone Hose

Read more less

Product Description 102-76mm Straight Reducer Silicone Hose

Read more less

Product Description 102-89mm Reducing Elbow Silicone Hose

Read more less

Product Description 102-89mm Straight Reducer Silicone Hose

Read more less

102mm 45° Elbow Silicone Hose. If you are unsure if this product is suitable for your application, please contact us. 

Read more less

Product Description 102mm Alloy 45 Degree Bend

Read more less

Product Description 102mm Alloy 90 Degree Bend

Read more less

Product Description 102mm Bellows Flexible Silicone Hose

Read more less

Product Description 102mm Coupler Silicone Hose  

Read more less

Product Description 102mm O/D Alloy Hose Joiner

Read more less