splitters
ECS Tuning ECS TUNING - Audi B8 A4/S4 Carbon Fiber Grille Accent Set - Pre Facelift
Raise the level of style on your pre-facelift B8 S4 or A4 S-Line with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design Grille Flares extend around the inside of the inlet grille to cover any exposed paint PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. Note: Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£559.57
ECS Tuning ECS TUNING - Audi B8 A4/S4 Gloss Black Grille Accent Set - Pre Facelift
Raise the level of style on your pre-facelift B8 S4 or A4 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design Grille Flares extend around the inside of the inlet grille to cover any exposed paint PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. Note: Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£216.00
ECS Tuning ECS TUNING - Audi B8 S4 / A4 S-Line Pre-Facelift Front Lip - Gloss Black
Raise the level of style on your B8 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. If you are looking for a whole package, this front lip is designed to compliment our flat side skirts (ES4045736) and rear bumper side splitters (ES4044452). To further compliment the look of your new front lip, check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£306.91
ECS Tuning ECS TUNING - Audi B8.5 A5 S-Line / S5 Grille Accent Set - Gloss Black
Raise the level of style on your facelift B8.59 S5 or A5 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design Grille Flares extend around the inside of the inlet grille to cover any exposed paint PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. *Does not fit Competition models Note: Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£237.25
ECS Tuning ECS TUNING - Audi B8.5 S4 / A4 S-Line Facelift Front Lip - Splitter Style - Gloss Black
Raise the level of style on your B8.5 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. With a flatter "splitter" style profile, this quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. If you are looking for a whole package, this splitter style front lip is designed to match and compliment our flat side skirts (ES4045736) and rear bumper side splitters (ES4044452). To further compliment the look of your new front lip, check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£350.59
ECS Tuning ECS TUNING - Audi B8.5 S4 / A4 S-Line Gloss Black Grille Accent Set - Facelift
Raise the level of style on your facelift B8.5 S4 or A4 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design Grille Flares extend around the inside of the inlet grille to cover any exposed paint PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. Note: Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£251.42
ECS Tuning ECS TUNING - Audi B8.5 S5 / A5 S-Line Facelift Front Lip - Gloss Black
Raise the level of style on your B8.5 A5 S-Line or S5 with the ECS Tuning gloss black front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. Check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£350.59
ECS Tuning ECS TUNING - Audi B8/B8.5 A4/S4 Flat Side Skirts - Gloss Black
So you changed the look of the front and rear of your B8/B8.5 A4 or S4 but forgot the sides? Upgrade your exterior styling with the ECS Tuning Gloss Black Flat Side Splitters. These side skirts simply bolt on underneath the rocker panel with included self tapping screws and add a more sporty appearance to your vehicle. A great looking stand-alone body part or one that compliments other existing exterior styling upgrades. Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment, each set is crafted of gloss black, UV stabilized ABS polymer to achieve its world class appearance and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Convenient, pre-drilled mounting holes allow you to correctly align and secure the side skirt extensions to the rocker panels. We suggest putting a dab of a rust preventative (anti seize or similar) on the tip of each screw before install. This will lubricate the screw and protect the newly threaded holes. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£319.90
ECS Tuning ECS TUNING - Audi B9 A4 S-Line / S4 Grille Accent Set - Gloss Black
Fits up to 2019 model year with *pre-facelift* front bumpers Raise the level of style on your pre-facelift B9 S4 or A4 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design Grille Flares extend around the inside of the inlet grille to cover any exposed paint PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. Note: Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£234.89
ECS Tuning ECS TUNING - Audi B9 A4/S4 Front Lip Spoiler - Gloss Black
Fits up to 2019 model year with *pre-facelift* front bumpers Raise the level of style on your B9 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front lip, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front Lip Spoiler was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£350.59
ECS Tuning ECS TUNING - Audi B9 S4/A4 Trunk Spoiler - Gloss Black
Requires removal of the factory trunk spoiler Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B9 S4 and A4. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid. Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. *Installation on the B9 S4 requires removal of the factory trunk spoiler. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£227.81
ECS Tuning ECS TUNING - B9.5 Mid-Facelift S4/A4 S-Line 3 Piece Front Lip - Gloss Black
Only Fits 2019 Mid-Facelift Bumpers Raise the level of style on your Mid-Facelift B9 A4 S-Line or S4 with the ECS Tuning gloss black 3-piece front lip. These quality pieces were engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, these front lip spoilers will be sure to catch attention and turn heads. This ECS Tuning Front Lip is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front lip, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front lip was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£342.34
ECS Tuning ECS TUNING - B9.5 Mid-Facelift S4/A4 S-Line Front Chin Spoilers - Gloss Black
Fits 2019 Mid-Facelift Bumpers Raise the level of style on your Mid-Facelift B9 A4 S-Line or S4 with the ECS Tuning gloss black front chin spoilers. These quality pieces were engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, these front lip spoilers will be sure to catch attention and turn heads. These ECS Tuning Front Chin Spoilers are made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front chin spoilers, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front Chin Spoilers were test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£276.22
ECS Tuning ECS TUNING - Carbon Fiber Fog Grille Overlay Set
Raise the level of style on your B9 S4 with the ECS Tuning Carbon Fiber Grille Overlay Set. This quality addition was engineered and designed in-house to fit directly to your factory grille, with no modifications required. These overlays cover up the existing chrome and add a more aggressive profile and design. The overlays were designed to provide the vehicle with a more aggressive look by accentuating the trim area inside the grilles. An exclusive design only available through ECS Tuning, this grille overlay set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Carbon Fiber Grille Overlay Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper side grille trim using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing a similar look to the "RS model" front bumpers. Features from the bumper, grille, and inlet grille are integrated into our design Enhances the already existing grille flares for more aggressive “RS” styling Grille overlays extend across the inside of the inlet grille to cover any exposed chrome PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Overlay Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Overlays directly to the grille trim using the pre-applied adhesive tape. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£334.07
ECS Tuning ECS TUNING - Carbon Fiber Front Lip Spoiler
Raise the level of style on your Pre-facelift B8 A4 S-Line/S4 with the ECS Tuning carbon fiber front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£886.62
ECS Tuning ECS TUNING - Carbon Fiber Front Lip Spoiler
Raise the level of style on your Facelift B8 A4 S-Line or S4 with the ECS Tuning Carbon Fiber Front Lip Spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, and Diffuser, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£961.00
ECS Tuning ECS TUNING - Carbon Fiber Front Lip Spoiler
Raise the level of style on your B9 A4/S4 with the ECS Tuning carbon fiber front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, Diffuser, and Grille Accents, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. *Front Lip Spoiler was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* Cross Reference valance This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£873.64
ECS Tuning ECS TUNING - Carbon Fiber Grille Accent Set
Raise the level of style on your B8 S4 with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a similar look to the RS model front bumper covers. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. 3M dual sided tape has been pre-applied to each piece, ready for installation right out of the box. Note: Due to slight variations in bumpers, we include extra 3M tape to use as needed. Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. To compliment the look of your new grille accents, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, Diffuser, and Front Lip, only available from ECS Tuning. Previous Revisions 018360ECS01 Cross Reference grill This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£439.15
ECS Tuning ECS TUNING - Carbon Fiber Grille Accent Set
Raise the level of style on your B9 S4 or A4 S-line with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a similar look to the "RS model"front bumper covers. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing a similar look to the "RS model" front bumpers. Features from the bumper, grille, and inlet grille integrated into our design Enhances the already existing grille flares for more aggressive “RS” styling Grille Flares extend around the inside of the inlet grille to cover any exposed paint PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference grill This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£578.46
ECS Tuning ECS TUNING - Front Lip Diffuser - Carbon Fiber
Product Details Raise the level of style on your MKVI with our real carbon fiber front lip diffuser. This quality piece screws right into your factory front valance and gives the car a much lower visual appearance. For ease of installation, we have provided a step by step PDF installation guide. Our ECS Carbon Fiber Front Diffuser is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. * 4 of ES2918127 is suggested for proper installation.*
£644.58
ECS Tuning ECS TUNING - Front Lip Spoiler - Carbon Fiber
Product Details Raise the level of style on your MK6 with our real carbon fiber front lip. This quality piece screws into the same locations as your factory front lip spoiler (if equipped) and gives the car a much lower visual appearance. Installation is short and simple as it reuses existing factory hardware. Our ECS Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. For vehicles without front lip spoiler, you will also need the following: QTY 5 - ES6571 - Speed Nuts QTY 9 - ES471384 - Self Tapping Screws This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VI All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£407.27
ECS Tuning ECS TUNING - OE Style Front Lip Spoiler - Carbon Fiber
Product Details Raise the level of style on your MKVI with our real carbon fiber front lip. This quality piece screws into the same locations as your factory front lip spoiler (if equipped) and gives the car a much lower visual appearance. Installation is short and simple as it reuses existing factory hardware. Our ECS Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. For vehicles without front lip spoiler, see kit ES3102529. * 4 of ES2918127 is suggested for proper installation.* This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VI All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£354.14
ECS Tuning ECS TUNING - Side Skirt Extension Set - Gloss Black Fiberglass
The ECS MK6 Golf Side Skirt Extensions quickly install over the OEM skirts and add a wider, more aggressive stance without the troubles of a complete side skirt swap. They feature durable materials and are 3D designed for optimum fitment. 10 counter-sunk screw holes allow for rigid installation with the included Genuine VW self tapping torx screws. Manufactured from a lightweight fibre composite material with a polymer matrix for enhanced durability and precision fitment. It’s finished in a gloss black clear coated finish to match other gloss black exterior components and is ready for install without the need of further paint or body work required. The lightweight side skirt extensions simply screw to your existing MK6 Golf R side skirts with the included hardware. Simply line up the skirt and hold into position, carefully drill 10 holes per side through the pre-molded countersunk mounting holes and enjoy your new visual transformation! This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£338.80