All

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the Mk3 Focus RS. The original undertray on this car is notoriously weak due to the fibre material construction and as a result are prone to failure over time. Our solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points, as well three additional fittings on the front edge, and is nut and bolted both sides to ensure absolute security. Unlike any other replacement undertray on the market, our design features no step, which is better suited to lowered cars. The cooling ducts are also larger in size to increase air flow passing over the gearbox and transfer case, which helps to reduce transmission operating temperatures and the sides pieces are larger to create a seal against the arch liners. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. PLEASE NOTE: The undertray uses existing mounting points and bolts, but it is essential the original plastic fittings the bolts screw into are in good condition. These should only be reused if they still support the bolt properly and you are able to tighten it firmly. If they are worn or broken and offer little to no resistance as you wind the bolt in, they should be replaced with new items from Ford, as failure to do so may cause the undertray to work loose. The Ford part number for the plastic undertray fittings are as follows: W702438-S300  Features: Direct replacement for original Focus RS Mk3 undertray Created from 3D scan and CAD software for perfect fitment Made from high-quality aluminium for increased strength Uses original mounting points – no cutting or drilling required Additional mounting points for absolute security  Improved transmission cooling due to larger ducting Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSFO149

Read more less

  As part of our expanding Renault product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Megane RS Mk4 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Megane RS Mk4 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Renault Megane RS Mk4 Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSREN11

Read more less

TECHNICAL DATA Using our knowledge and experience in designing functioning front splitters for various Clubsport race series’ in the UK, we have produced a comprehensive, double-lipped, one-piece moulded design to suit the Yaris GR. Unlike a lot of aftermarket splitters, the upper edge has been profiled to perfectly meet the lower part of the front bumper, which ensures there is no gap or pocket that allows air to get trapped and create a negative effect. Finished in lightweight but strong GRP material with a gloss gel coat finish, the splitter can be secured in which ever way is preferred. AIRTEC Part No: ATMSYGR22   PLEASE NOTE: Drilling to the bumper is required to fit this product Will only fit a Yaris GR (2020 to 2024) front bumper  We endeavour to deliver an extremely high-quality product but due to the handmade manufacturing process there is the possibility of imperfections. Therefore the appropriate prepping and painting is recommended before fitting.

Read more less

As part of our expanding Audi product range, AIRTEC Motorsport is proud to launch our S1 oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the S1 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features:  Kit developed specifically for the S1 8X (Still unconfirmed on GB Models) Easy, direct fitment Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide   AIRTEC part no: ATMSVAG15

Read more less

Currently made to order, please allow 2-3 weeks before dispatch. AutoSpecialists Design extended wheel arches for the Focus ST 225 (Pre-Facelift) Suitable for the Focus MK2 ST 225 5-door Pre-Facelift to fit with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Registered Design Right number: 6044470 Part no: ASDFO18

Read more less

AutoSpecialists Design WRC style bonnet vents. Available for Focus MK2 pre-facelift. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Supplied with cutting templates.  Please note: Mesh not included. Registered Design Right number 6016416

Read more less

  AutoSpecialists Design WRC style bonnet vents. Available for Focus MK2 Facelift (INC RS) **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Please note: Mesh not included. Registered Design Right number 6021160  

Read more less

AutoSpecialists Design Focus RS Mk2 Spoiler Lip Finished in a high quality gel coat ready to paint, designed to fit over the standard spoiler. Please note: We cannot guarantee security, double-sided tape can be at risk of lifting when using a jet wash or when travelling at high speed. Bonding the spoiler lip is recommended to ensure it doesn’t lift or come off. **IMPORTANT** Unpainted, comes finished in white or black coating. comes with no adhesive- will need to source your own.  We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Part no: ASDFO24

Read more less

  Auto Specialists Design WRC style bonnet vents. Available to fit both Mk3 Focus RS and ST250 Facelift models. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Please note: Mesh not included. Pictured Focus RS MK3 – Bonnet is the same as a Focus MK3 ST Facelift. Registered Design Right number 6016417 Part no: ASDFO2  

Read more less

Auto Specialists Design Focus RS Mk3 spoiler lip. **IMPORTANT** Unpainted - requires sanding, prep and paint before installation. These are hand made and may require minor alterations for the perfect fit. This is not a "Ready to install" product and it is recommended to have a body shop perform the work. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Please note: We cannot guarantee security, double sided tape can be at risk of lifting when using a jet wash or when traveling at high speed. Bonding the spoiler lip is recommended to ensure it doesn’t lift or come off. Registered Design Right number 6014890 Part No: ASDFO7  

Read more less

AutoSpecialists Design WRC style bonnet vents for Fiesta MK7 Pre-Facelift **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Please note: Mesh not included. Registered Design Right number 6021160 Part no: ASDFO8   

Read more less

Focus Mk1 lightweight replacement polished alloy water header tankNo Drilling required, uses original fixing points and is a direct replacement for original Ford plastic header tank.Please note the Header tank comes with a non decorative cap, however for the perfect show look why not add a decorative cap. AIRTEC Part No: ATMSFO21

Read more less

The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better! Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models. The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky. AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance. The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination. Please note, this currently only fits AIRTEC’s Group A induction kit. Kit includes: 1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black 3x Billet alloy spacers and stainless-steel fittings Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models AIRTEC part no: ATMSFO45

Read more less

Designed at AIRTEC Motorsport, we developed this breather kit package to suit modified Fiesta ST150 models after finding our own supercharged demo car would often show signs of excessive oil residue pushed through the breather pipes, cam cover and crank case breather during fast road and track use. This would in-turn cause residue and vapour build up as well as smoke as the excess oil was diverted back into the intake and ultimately into the engine’s inlet. We have also seen similar traits in naturally aspirated examples with uprated camshafts or even remaps. Our kit is based around an oil breather tank that is designed to separate the oil from the vapour where it would usually be diverted back into the intake. The tank then collects the oil and features a level indicator, which once full can be easily emptied by removing the drain located at the bottom. The kit also includes an inlet manifold blank off pipe (as you will not need the  to breathe back into the inlet manifold anymore), as well as two specially made Pro Hoses silicone lines, a mesh filter and all fixtures and fittings, including jubilee clips.  This kit is designed to fit with the original PCV set up but can be adapted to fit with our AIRTEC Motorsport billet PCV baffle plate (or other aftermarket PCV plates) with an additional hose and fitting – please get in contact with your specific requirements. The tanks are available in silver, black or polished finishes – please choose from options. Features:  Kit designed specifically for the Fiesta ST150 model Helps the engine breathe better and reduce oil residue build up AIRTEC Motorsport oil breather tank with oil level indicator High quality Pro Hoses silicone lines, specific for this model Tanks available 3 finishes and hoses available in 3 colours All fixtures and fittings included in the comprehensive kit Fitting takes approximately 20-30 minutes AIRTEC part no: ATMSFO58

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our oil filter housing cap for BMW N20/N52/N54/N55/S55. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to replacing the OEM oil filter housing cap that’s originally made in plastic and is known to become brittle and fail over time. It also improves aesthetics within the engine bay and is easier to remove and replace, as it doesn’t require the special BMW tool the original does. Machined from billet aluminium, the cap features intricate detailing and an engraved AIRTEC Motorsport logo and wording, with a high quality anodised grey finish. Easy to fit, the cap is a direct replacement for the original and uses the original O-ring, filter cage and filter. Replaces BMW part number: 11427525334 Will fit the following – please check if in doubt: • N54 engines (135i/335i/535i/Z4)• N55 engines (135i/M135i/M235i/335i/435i/535i/M2/Z4)• S55 engines (M2/M3/M4)• N51 & N52 engines (125i/128i/130i/323i/325i/330i/523i/525i/528i/530i/630i/730i/Z4)• N20 & N26 engines (125i/220i/228i/320i/328i/420i/428i/520i/525i/Z4) AIRTEC Part No: ATMSBMW3  

Read more less

For improved engine bay looks, AIRTEC Motorsport is offering an aesthetic engine cover. This direct replacement part is very easy to fit and smartens the appearance the engine bay. AIRTEC Motorsport Part No: ATMSP3081

Read more less

AIRTEC Motorsport’s in-house engineers developed this package from a thorough design and development process. After trying and testing several designs to ensure it was simple yet effective, the result is an adjustable wing kit that is easy to fit and allows the boot to open as usual, whilst offering improvements to both the stability on road and track, as well as to the look of the car overall. Using our proven aero foil blade design, the comprehensive kit includes laser cut brackets and a choice of end plates that are finished in a high-quality gloss black or gloss red powder coat (please note, the shade of red is not identical to the OEM Mini Chilli Red, but is similar). The car requires the smaller Mini One/Cooper original spoiler to be fitted – the wing cannot be fitted with the original Cooper S/JCW spoiler in place.  All fixtures and fittings are included, as well as detailed fitting instructions.  End Plate Options (please see pictures):Option 1 – Road End Plates – finished in black or redOption 2 – Race End Plates – finished in black or red  Features: Designed and developed in the UK Bespoke laser-cut and powder coated alloy brackets Unique alloy end plates available in two powder coated colours Choose centre blade section finished in gel coat or satin black paint (extra cost) Comprehensive fitting kit with all fixtures, fittings and detailed instructions.  AIRTEC part no: ATMSMINI9 PLEASE NOTE: Drilling to the boot lid is required to fit this product The shade of red is not identical to the OEM Mini Chilli Red, but is very similar Cooper/One spoiler (BMW part no: 51627375855) required in place of the original Cooper S/JCW spoiler We endeavour to deliver an extremely high-quality product but due to the handmade manufacturing process there is the possibility of imperfections on the centre wing blade. Therefore the appropriate prepping and painting is recommended before fitting – or we can supply the blade prepped and painted before sending it for an additional cost.  

Read more less

As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the R56 Cooper S model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the R56 Cooper model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. There is also the option to add a breather hose, which is required to fit the AIRTEC Motorsport intake pipe/induction kit.  The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the R56 Mini Cooper S  Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSMINI7

Read more less

Our simple solution allows a race type tow strap to be fitted to your car’s existing tow eye boss. This way you don’t have to remove the bumper to fit it or have to worry that it’s in the incorrect position that may lead to damage if it’s ever used. AIRTEC part no: ATMSHYU10 TECHNICAL DATA: Our simple solution allows a race type tow strap to be fitted to your car’s existing tow eye boss. This way you don’t have to remove the bumper to fit it or have to worry that it’s in the incorrect position that may lead to damage if it’s ever used. We designed this bolt/boss specifically as Hyundai made the original towing eye thread a custom size, which meant we had to make a tool to cut the thread of the adapter. We then added a flat section to allow it to tighten with a 19mm spanner before having it zinc plated. Available as a complete kit with a genuine TRS tow strap in a choice of colour together with the adapter boss and tow strap fixing bolt. Thread also available on its own, or with the optional tow strap. AIRTEC part no: ATMSHYU10

Read more less

As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the F56 JCW & Cooper S (pre-LCI) model, suitable for track or fast road use. AIRTEC Part No: ATMSMINI10 TECHNICAL DATA As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the F56 JCW & Cooper S (pre-LCI) model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Mini F56 JCW & Cooper S (pre-LCI) model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet alloy bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Mini F56 JCW & Cooper S (pre-LCI) Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSMINI10

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.   AIRTEC Part Number: ATMER47 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats   Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.     Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.   Fits Right-Hand Drive vehicles only     ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available   ⦁     Vehicle specific – no trimming required   AIRTEC Part Number: ATMER47

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER48 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER48

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER49 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER49

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number:  ATMER45 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats    Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number: ATMER45

Read more less