All

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch the direct replacement aluminium under tray for the BMW F80 M3 and F82/F83 M4 models. The solution to creating a direct replacement under tray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required.  Designed to work with the AIRTEC Motorsport larger capacity oil cooler, which when fitted in place with the original plastic under tray causes to bow outwards due to the oil cooler’s larger size and the BMW under tray’s weak construction. Our direct replacement under tray is made from 2mm aluminium to ensure durability and has also been designed to accommodate the larger dimensions of the AIRTEC Motorsport oil cooler. The product also comes with pre-cut rubber trims to seal the under tray and ensure the cooling effectiveness with the options of a larger rubber trim for the original oil cooler or a smaller rubber trim for the AIRTEC Motorsport oil cooler both inside the box. It has also been designed to work with the AIRTEC Motorsport GTS-style aero under tray pan to create a comprehensive under tray package.  Finished in a high-quality black powder coat finish, the under tray offers improved protection, durability and cooling effectiveness. Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the under tray to work loose. Features: · Direct replacement for F80 M3 and F82/F83 M4 models · Created from 3D scan and CAD software for perfect fitment · Designed to work with the AIRTEC Motorsport larger capacity oil cooler · Made from high-quality 2mm aluminium for increased strength   Rubber trims to seal the under tray and ensure cooling effectiveness · Uses original mounting points – no cutting or drilling required   Also works with the AIRTEC Motorsport GTS-style aero under tray pan · Comes in a durable black powder coat finish AIRTEC part no: ATMSBMW34

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium cooling under tray for the Civic FK8 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement under tray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Designed to work on a standard car or even more effectively in conjunction with our soon to be released AIRTEC Motorsport gearbox cooler, the under tray is finished in a high-quality black powder coat finish, offering improved cooling effectiveness as well as strength and durability. What does an under tray do?The under tray has three main purposes: to protect the underside of the vehicle from foreign objects flicking up and causing damage or accelerated wear. Secondly, to improve aerodynamics by creating a low pressure area as air accelerates past its smooth surface. This reduces drag, which works towards improving grip, handling as well as fuel efficiency. Lastly, on performance models, the under tray often provides increased cooling by either venting cold air to, or extracting warm air from the engine bay. Therefore improving the strength, design, size and cooling effect can offer fantastic benefits. Features: Direct replacement for original Honda Civic FK8 Type under tray Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON19

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Fiesta 1.0 EcoBoost Mk7 model suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. This is particularly prevalent with the EcoBoost engine, which can be known for poor reliability without good preventative maintenance.   AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Fiesta 1.0 EcoBoost Mk7 model utilises the heat shield from our AIRTEC Motorsport Stage 2 induction kit to attach the mounting bracket. As a result, it requires the induction kit to be fitted first and will not work with other induction kits or the original air box.  It features a high-quality laser cut bracket finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. PLEASE NOTE: This kit is designed to fit ONLY with our AIRTEC Motorsport Stage 2 Induction Kit for Fiesta Mk7 1.0 EcoBoost. It attaches to the shield and therefore will NOT fit with any other type of induction kit or with the original air box.  Features: Developed specifically for the Fiesta 1.0 EcoBoost Mk7 Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSFO160

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk4 Focus ST owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit 2.3-litre ST models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit. A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Additional fuel rail available separately here. Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included AIRTEC part no: ATMSFO152

Read more less

  As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our Crank Case Ventilation (CCV) oil catch can upgrade for the Civic Type R FL5 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. The Honda Civic Type R FL5 features both of these, so we’ve developed kits to cater for each and recommend fitting both for ultimate protection. AIRTEC Motorsport’s solution to developing a CCV catch can kit specifically for the Civic Type R FL5 model utilises the available space at the rear of the engine bay to integrate seamlessly. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a Crank Case Ventilation catch can?The CCV port vents directly from inside the engine’s crank case to the intake system and when under heavy load, such as full throttle, allows significant blow-by gases and vapour to pass, which is what creates the undesirable carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Please note: This currently will only fit with the original turbo inlet pipe. If you have an aftermarket turbo inlet pipe fitted, a relocation mounting bracket will be available soon.  Features: Developed specifically for the Honda Civic Type R FL5 CCV side Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC part no: ATMSHON12

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium cooling under tray for the Civic FL5 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement undertray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Designed to work on a standard car or even more effectively in conjunction with our AIRTEC Motorsport gearbox cooler, the under tray is finished in a high-quality black powder coat finish, offering under tray offers improved cooling effectiveness as well as strength and durability. Features: Direct replacement for original Honda Civic FL5 Type under tray Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON14

Read more less

  As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our Positive Crankcase Ventilation (PCV) oil catch can upgrade for the Civic Type R FL5 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. The Honda Civic Type R FL5 features both of these, so we’ve developed kits to cater for each and recommend fitting both for ultimate protection. AIRTEC Motorsport’s solution to developing a PCV catch can kit specifically for the Civic Type R FL5 model utilises the available space at the front of the engine bay to integrate seamlessly. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a Positive Crankcase Ventilation catch can?The PCV valve is a one-way valve that when open allows blow-by gases and vapour produced by the engine to pass from the crank case and back into the inlet manifold, which is what creates the undesirable carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Honda Civic Type R FL5 PCV side Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC part no: ATMSHON10

Read more less

  As part of our expanding Peugeot product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the 208 GTI model suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the 208 GTI model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the 208 GTI Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSP2082  

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium under tray for the Yaris GR Gen 1 and Gen 2 models including automatics. The IssueThe original under tray on Gen 1 cars features no venting at all and is made from a weak fibre material construction which will be prone to failure over time. Gen 2 cars feature a plastic under tray but with a small single vent for the transfer case alone.  ConstructionOur solution to creating a direct replacement under tray began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points and fixings. Made in 2mm aluminium and finished in a high-quality black powder coat, our under tray offers an enhanced level of protection to the underside of the car but more importantly, the design has also been carefully considered to ensure improved cooling and air flow to the vital transmission components.  CoolingWhilst the Gen 1 under trays feature no cooling at all, the Gen 2 under trays feature a basic duct for the transfer case at the rear, as clearly Toyota see this as an area that requires cooling. The AIRTEC Motorsport under tray therefore utilises a much larger scoop for the rear to force more air flow and offer better cooling. It also features a built in gearbox cooling duct, together with a venting section behind it to create air flow to and from the transmission and reduce temperatures. The comprehensive design also features rear ventilation to allow heat to exit the undertray together with side vents to further improve air flow. ConclusionA simple yet effective upgrade that offers improved strength, durability and cooling effectiveness.   Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original Toyota fittings should only be reused if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from Toyota, as failure to do so may cause the under tray to work loose. Features: Direct replacement under tray for Yaris GR Gen 1 and Gen 2 (incl. Automatic) Improved cooling to vital transmission components Uses all original mounting points – no cutting or drilling required Created from 3D scan and CAD software for perfect fitment Made from 2mm aluminium for increased strength Comes in a durable black powder coat finish Uses existing fixtures and fittings   Registered Design Right number: Application Pending AIRTEC part no: ATMSYGR32

Read more less

Designed to replace the original for lights on the FK2 Civic Type R. Made from aluminium and finished in a high-quality black powder coat, the grilles are a direct replacement that reuse the original bolts. There is no cutting or trimming required making installation a simple process. AIRTEC part number: ATMSHON13

Read more less

  Designed to fit solely with our AIRTEC Motorsport Mk3 Focus ST/RS and Mk4 Focus ST cast inlet manifold upgrade, this fuel rail allows four additional top feed fuel injectors to be easily added. Working in conjunction with the car’s original Direct Injection set up, this offers hugely increased fuelling capabilities that are required when pushing power to a much higher level.  Machined from high-quality aluminium and finished in anodised black, the fuel rail features ORB-8 fittings at both ends that adapt to AN-6 male fittings, which come supplied.  The comprehensive fitting kit also includes mounting brackets, O-rings for the ORB fittings as well as all fixtures required to fit directly to the manifold.  Please note: Does not include injectors, fuel lines or fuel line fittings for the engine side.  AIRTEC part no: ATMSFO161

Read more less

  As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.  A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.  Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength  Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response   Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included  AIRTEC part no: ATMSFO151

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

  As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Polo GTI AW model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Polo GTI AW model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the VW Polo GTI AW Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSVAG19

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our uprated DCT undertray for the E90, E92 and E93 M3 models. The front part of the original undertray on these cars is notoriously weak due to its fibre material construction and as a result is prone to failure over time. Our solution is a direct replacement undertray made in aluminium that reuses all of the original mounting points to ensure a perfect and secure fitment. Finished in a high-quality black powder coat finish, the undertray offers improved strength and durability, and is supplied with all fixtures and fittings, including installation instructions. Fitment: Replaces BMW part number 51757898849   Features: •     Direct replacement for original E9x M3 DCT undertray •     Made from high-quality aluminium for increased strength •     Uses all original mounting points – no cutting or drilling required •     Comes in a durable black powder coat finish •     Supplied with all fixtures and fittings •     Installation instructions included  

Read more less

As part of our expanding Suzuki product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Swift Sport Boosterjet model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Swift Sport model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Suzuki Swift Sport Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSSUZ3  

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the E90, E92 and E93 M3 models. The front part of the original undertray on these cars is notoriously weak due to its fibre material construction and as a result is prone to failure over time. Our solution is a direct replacement, three-piece undertray made in aluminium that reuses all of the original mounting points to ensure a perfect and secure fitment. Unlike others on the market, the design of the oil cooler extraction ducting has also been carefully considered to imitate the original in order to maintain sufficient cooling. As a result, the sides of the ducts are enclosed against the oil cooler and the radius of the ducting increased in size. There are also brake duct cut outs to allow the use of a GT4-style splitter with brake cooling ducts. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. Features:•     Direct replacement for original E9x M3 undertray•     Made from high-quality aluminium for increased strength•     Uses all original mounting points – no cutting or drilling required•     Improved oil cooling extraction through enclosed ducting•     Allows for GT4-style splitter with brake cooling ducts•     Comes in a durable black powder coat finish•     Supplied with all fixtures and fittings•     Detailed installation instructions Registered Design Right number: Application Pending

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the BMW G87 M2, G80 M3 and G82 M4 models. The IssueThe original undertray on these cars is made from plastic and features a large opening to allow air to cool the engine’s oil cooler, which is mounted close to the floor. However, due to the oil cooler’s low-level placement and lack of protection from road debris that may flick up, it is left open and exposed to damage, which could cause imminent engine failure. The SolutionOur solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required. It also retains the original BMW rubber bumper trim. The laser-cut mesh section ensures no substantial debris can damage the oil cooler and our design also features an additional venting in the stepped section to further improve air flow. Finished in a high-quality black powder coat finish, the undertray offers improved protection, durability and cooling effectiveness. Please note: The undertray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the undertray to work loose. Features: · Direct replacement for original BMW G-series M car undertray · Created from 3D scan and CAD software for perfect fitment · Fine mesh protects the exposed low-level BMW oil cooler · Made from high-quality aluminium for increased strength · Uses original mounting points – no cutting or drilling required · Improved cooling ability due to larger venting · Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSBMW20

Read more less

As part of our expanding Toyota Yaris GR product range, we’ve developed an aluminium engine cover. This direct replacement part is easy to fit and smartens the appearance of the engine bay, whilst still allowing access to the oil filler cap and dipstick. Raised from the engine to help dissipate heat, the design also features additional venting at the rear, which is closest to the turbo.  Finished in a high-quality black powder coat for durability, the cover comes with all fixtures and fittings, as well as detailed installation instructions.  A simple and effective modification that can be fitted in minutes.  Registered Design Right: Application Pending  AIRTEC part no: ATMSYGR24

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the Mk3 Focus RS. The original undertray on this car is notoriously weak due to the fibre material construction and as a result are prone to failure over time. Our solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points, as well three additional fittings on the front edge, and is nut and bolted both sides to ensure absolute security. Unlike any other replacement undertray on the market, our design features no step, which is better suited to lowered cars. The cooling ducts are also larger in size to increase air flow passing over the gearbox and transfer case, which helps to reduce transmission operating temperatures and the sides pieces are larger to create a seal against the arch liners. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. PLEASE NOTE: The undertray uses existing mounting points and bolts, but it is essential the original plastic fittings the bolts screw into are in good condition. These should only be reused if they still support the bolt properly and you are able to tighten it firmly. If they are worn or broken and offer little to no resistance as you wind the bolt in, they should be replaced with new items from Ford, as failure to do so may cause the undertray to work loose. The Ford part number for the plastic undertray fittings are as follows: W702438-S300  Features: Direct replacement for original Focus RS Mk3 undertray Created from 3D scan and CAD software for perfect fitment Made from high-quality aluminium for increased strength Uses original mounting points – no cutting or drilling required Additional mounting points for absolute security  Improved transmission cooling due to larger ducting Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSFO149

Read more less

  As part of our expanding Renault product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Megane RS Mk4 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Megane RS Mk4 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Renault Megane RS Mk4 Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSREN11

Read more less

As part of our expanding Audi product range, AIRTEC Motorsport is proud to launch our S1 oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the S1 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features:  Kit developed specifically for the S1 8X (Still unconfirmed on GB Models) Easy, direct fitment Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide   AIRTEC part no: ATMSVAG15

Read more less

The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better! Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models. The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky. AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance. The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination. Please note, this currently only fits AIRTEC’s Group A induction kit. Kit includes: 1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black 3x Billet alloy spacers and stainless-steel fittings Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models AIRTEC part no: ATMSFO45

Read more less

Designed at AIRTEC Motorsport, we developed this breather kit package to suit modified Fiesta ST150 models after finding our own supercharged demo car would often show signs of excessive oil residue pushed through the breather pipes, cam cover and crank case breather during fast road and track use. This would in-turn cause residue and vapour build up as well as smoke as the excess oil was diverted back into the intake and ultimately into the engine’s inlet. We have also seen similar traits in naturally aspirated examples with uprated camshafts or even remaps. Our kit is based around an oil breather tank that is designed to separate the oil from the vapour where it would usually be diverted back into the intake. The tank then collects the oil and features a level indicator, which once full can be easily emptied by removing the drain located at the bottom. The kit also includes an inlet manifold blank off pipe (as you will not need the  to breathe back into the inlet manifold anymore), as well as two specially made Pro Hoses silicone lines, a mesh filter and all fixtures and fittings, including jubilee clips.  This kit is designed to fit with the original PCV set up but can be adapted to fit with our AIRTEC Motorsport billet PCV baffle plate (or other aftermarket PCV plates) with an additional hose and fitting – please get in contact with your specific requirements. The tanks are available in silver, black or polished finishes – please choose from options. Features:  Kit designed specifically for the Fiesta ST150 model Helps the engine breathe better and reduce oil residue build up AIRTEC Motorsport oil breather tank with oil level indicator High quality Pro Hoses silicone lines, specific for this model Tanks available 3 finishes and hoses available in 3 colours All fixtures and fittings included in the comprehensive kit Fitting takes approximately 20-30 minutes AIRTEC part no: ATMSFO58

Read more less