All

Ford Focus MK4 Scuttle Panel Covers – Custom Laser-Cut Acrylic Upgrade Enhance your engine bay with our Ford Focus MK4 Scuttle Panel Covers – precision-cut and designed to transform your vehicle’s appearance with a premium, custom look. 🔹 Precision Engineering Each cover is laser-cut from 3 mm premium cast acrylic using state-of-the-art CO₂ laser technology. This ensures a perfect fit, flawless edges, and long-lasting durability every single time. 🔹 Easy, Secure Installation Every set comes pre-backed with genuine 3M™ automotive-grade adhesive, proven to withstand all weather and temperature conditions.Just clean, peel and stick — no drilling or modification required. 🔹 Fully Customisable Design Choose between: Small or Large Hexagon mesh patterns With or without ST logo Your choice of colour to match your car’s theme 🔹 What’s Included 2x Scuttle Covers (Left & Right) 2x Pre-applied ST Logos (if selected) 1x Alcohol Wipe for surface prep Fitting Instructions 🔹 Proudly Made in Britain 🇬🇧 Designed, cut and finished in the UK by enthusiasts for enthusiasts. Dispatch Info:Due to the wide range of customisation options, please allow up to 72 hours for dispatch during busy periods. We always aim to ship same or next working day whenever possible.

Read more less

Ford Focus MK4 Scuttle Panel Covers – Custom Laser-Cut Acrylic Upgrade Enhance your engine bay with our Ford Focus MK4 Scuttle Panel Covers – precision-cut and designed to transform your vehicle’s appearance with a premium, custom look. 🔹 Precision Engineering Each cover is laser-cut from 3 mm premium cast acrylic using state-of-the-art CO₂ laser technology. This ensures a perfect fit, flawless edges, and long-lasting durability every single time. 🔹 Easy, Secure Installation Every set comes pre-backed with genuine 3M™ automotive-grade adhesive, proven to withstand all weather and temperature conditions.Just clean, peel and stick — no drilling or modification required. 🔹 Fully Customisable Design Choose between: Small or Large Hexagon mesh patterns With or without ST logo Your choice of colour to match your car’s theme The Ford Performance decal across the top can also be customised in colour, allowing you to fine-tune your scuttle covers to your exact style. 🔹 What’s Included 2x Scuttle Covers (Left & Right) 2x Pre-applied ST Logos (if selected) 2x Pre-applied Ford Performance Logos 1x Alcohol Wipe for surface prep Fitting Instructions 🔹 Proudly Made in Britain 🇬🇧 Designed, cut and finished in the UK by enthusiasts for enthusiasts. Dispatch Info:Due to the wide range of customisation options, please allow up to 72 hours for dispatch during busy periods. We always aim to ship same or next working day whenever possible.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the  Show Day Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK by CEUK, this lightweight and secure Stainless Steel prop is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets / doors / boots open, whether or not your vehicle has gas lift struts. Crafted from Air Grade Stainless Steel and featuring precision-machined billet aluminium components with stainless steel fixings; then finished in a coloured polyolefin coating, the Show Day Prop offers both functionality and a sleek, professional appearance. Shaft Made from Stainless Steel, the shaft is ultra-thin at just 6mm and lightweight, with no wrapping or skinning. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. Lower Fixing The lower fixing features a precision bend, with a rubber cap to prevent scratches or damage to the vehicle. Extendability: The upper fixing has a 4cm / 40mm extendable thread, which can be raised to give a longer prop. Sizing Length of Prop Section only: 500mm / 50cm Total length when fully extended: 570mm / 57cm Adjustment Capability when installed: 53cm / 57cm

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch the direct replacement aluminium under tray for the BMW F80 M3 and F82/F83 M4 models. The solution to creating a direct replacement under tray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required.  Designed to work with the AIRTEC Motorsport larger capacity oil cooler, which when fitted in place with the original plastic under tray causes to bow outwards due to the oil cooler’s larger size and the BMW under tray’s weak construction. Our direct replacement under tray is made from 2mm aluminium to ensure durability and has also been designed to accommodate the larger dimensions of the AIRTEC Motorsport oil cooler. The product also comes with pre-cut rubber trims to seal the under tray and ensure the cooling effectiveness with the options of a larger rubber trim for the original oil cooler or a smaller rubber trim for the AIRTEC Motorsport oil cooler both inside the box. It has also been designed to work with the AIRTEC Motorsport GTS-style aero under tray pan to create a comprehensive under tray package.  Finished in a high-quality black powder coat finish, the under tray offers improved protection, durability and cooling effectiveness. Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the under tray to work loose. Features: · Direct replacement for F80 M3 and F82/F83 M4 models · Created from 3D scan and CAD software for perfect fitment · Designed to work with the AIRTEC Motorsport larger capacity oil cooler · Made from high-quality 2mm aluminium for increased strength   Rubber trims to seal the under tray and ensure cooling effectiveness · Uses original mounting points – no cutting or drilling required   Also works with the AIRTEC Motorsport GTS-style aero under tray pan · Comes in a durable black powder coat finish AIRTEC part no: ATMSBMW34

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium cooling under tray for the Civic FK8 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement under tray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Designed to work on a standard car or even more effectively in conjunction with our soon to be released AIRTEC Motorsport gearbox cooler, the under tray is finished in a high-quality black powder coat finish, offering improved cooling effectiveness as well as strength and durability. What does an under tray do?The under tray has three main purposes: to protect the underside of the vehicle from foreign objects flicking up and causing damage or accelerated wear. Secondly, to improve aerodynamics by creating a low pressure area as air accelerates past its smooth surface. This reduces drag, which works towards improving grip, handling as well as fuel efficiency. Lastly, on performance models, the under tray often provides increased cooling by either venting cold air to, or extracting warm air from the engine bay. Therefore improving the strength, design, size and cooling effect can offer fantastic benefits. Features: Direct replacement for original Honda Civic FK8 Type under tray Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON19

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk4 Focus ST owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit 2.3-litre ST models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit. A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Additional fuel rail available separately here. Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included AIRTEC part no: ATMSFO152

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium under tray for the Yaris GR Gen 1 and Gen 2 models including automatics. The IssueThe original under tray on Gen 1 cars features no venting at all and is made from a weak fibre material construction which will be prone to failure over time. Gen 2 cars feature a plastic under tray but with a small single vent for the transfer case alone.  ConstructionOur solution to creating a direct replacement under tray began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points and fixings. Made in 2mm aluminium and finished in a high-quality black powder coat, our under tray offers an enhanced level of protection to the underside of the car but more importantly, the design has also been carefully considered to ensure improved cooling and air flow to the vital transmission components.  CoolingWhilst the Gen 1 under trays feature no cooling at all, the Gen 2 under trays feature a basic duct for the transfer case at the rear, as clearly Toyota see this as an area that requires cooling. The AIRTEC Motorsport under tray therefore utilises a much larger scoop for the rear to force more air flow and offer better cooling. It also features a built in gearbox cooling duct, together with a venting section behind it to create air flow to and from the transmission and reduce temperatures. The comprehensive design also features rear ventilation to allow heat to exit the undertray together with side vents to further improve air flow. ConclusionA simple yet effective upgrade that offers improved strength, durability and cooling effectiveness.   Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original Toyota fittings should only be reused if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from Toyota, as failure to do so may cause the under tray to work loose. Features: Direct replacement under tray for Yaris GR Gen 1 and Gen 2 (incl. Automatic) Improved cooling to vital transmission components Uses all original mounting points – no cutting or drilling required Created from 3D scan and CAD software for perfect fitment Made from 2mm aluminium for increased strength Comes in a durable black powder coat finish Uses existing fixtures and fittings   Registered Design Right number: Application Pending AIRTEC part no: ATMSYGR32

Read more less

  Designed to fit solely with our AIRTEC Motorsport Mk3 Focus ST/RS and Mk4 Focus ST cast inlet manifold upgrade, this fuel rail allows four additional top feed fuel injectors to be easily added. Working in conjunction with the car’s original Direct Injection set up, this offers hugely increased fuelling capabilities that are required when pushing power to a much higher level.  Machined from high-quality aluminium and finished in anodised black, the fuel rail features ORB-8 fittings at both ends that adapt to AN-6 male fittings, which come supplied.  The comprehensive fitting kit also includes mounting brackets, O-rings for the ORB fittings as well as all fixtures required to fit directly to the manifold.  Please note: Does not include injectors, fuel lines or fuel line fittings for the engine side.  AIRTEC part no: ATMSFO161

Read more less

Bespoke Engine Bay Dress-Up Kit – Mk2 Ford Puma (All Models) | Anodised Washers & Stainless Screws by CEUK Upgrade your engine bay with one of CEUK’s most iconic and best-loved products — our Bespoke Dress-Up Kit, specifically designed for the Mk2 Ford Puma (all models). Why leave your bay looking amazing but keep the factory-fitted rusty, dull bolts? Our kit replaces them with premium anodised washers and custom-length stainless steel screws, precision-matched to your vehicle. This isn’t a universal kit — it’s engineered just for your Puma, so everything fits perfectly. 🔧 Kit Options: ✅ Option 1 – Standard Kit (Yellow-Circled Locations): Contents: 14x anodised washers + 14x stainless steel screws Fits: Headlights, Bumper Slam Panel & Air Feed ✅ Option 2 – Full Kit (Yellow + Red-Circled Locations): Contents: 20x anodised washers + 20x stainless steel screws Fits: Headlights, Bumper Slam Panel, Air Feed, Wings & Scuttle Panel 🌈 Available in Multiple Anodised Colours: Choose from a wide range of colours to match your engine bay theme. Every washer is made from high-grade aluminium, anodised for long-lasting colour and corrosion resistance. ✅ Why CEUK Over Generic Kits? Our kits actually fit – no guesswork, no generic M6 bolts that don’t work Vehicle-specific screws replicate OEM fitment No rust, no fuss – stainless steel hardware won’t corrode Made to last, not a cheap import No modification needed – just install and admire! Looking for additional screws or a fully custom setup? Get in touch – we offer ad hoc washer and screw orders upon request.

Read more less

  As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.  A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.  Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength  Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response   Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included  AIRTEC part no: ATMSFO151

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less