Performance - Ford Edge MK2 (2015-Present)

Enhanced Edition H1 LED Headlight Bulbs – 6000K Ice White | 20,000Lm | Direct Fit Experience unmatched brightness and clarity with the CEUK Enhanced Edition H1 LED Bulbs – designed for performance, built for simplicity. This powerful LED upgrade delivers a sharp, clean 6000K ice white output with a total output of 20,000 lumens, offering a drastic improvement over standard halogen H1 bulbs. ⚠️ Important: These are not suitable for cornering light applications. 🚀 Vision, Without Restriction We've engineered a direct-fit, no-fuss H1 LED solution that doesn't require any wire splicing, adapters, or awkward metal clips. Unlike many aftermarket options, CEUK’s H1 LEDs are built to fit into standard halogen bulb slots using the existing connectors and mounting points — just like OEM. Perfect for night drives, low-light conditions, or simply modernising your lighting setup, these bulbs are ideal for those who want high performance without the hassle. 💡 Why Upgrade to CEUK H1 LEDs? ✅ Direct OEM Fit – No clips, wiring mods, or converters ✅ 6000K Ice White Output – Modern, premium look ✅ Up to 20,000 Lumens Total Output – Huge visibility gain ✅ 50W Power Draw Per Bulb – Bright, but safe for OEM harnesses ✅ Projector & Reflector Compatible – Versatile installation ✅ No Flickering or Overheating – Optimised for daily driving ✅ Reduced Eye Strain – Crisp light that mimics daylight ✅ Quick & Easy Install – Designed with DIY installers in mind ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Colour Temp 6000K (Ice White) Brightness 10,000Lm per bulb (20,000Lm total) Fitment H1 (Standard Halogen Socket) 📦 What You’ll Receive: 2x CEUK Enhanced Edition H1 LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (keep original packaging if longer warranty is stated) Support from our UK-based team if you need fitting advice 🔧 Vehicle Compatibility: This product is suitable for any vehicle using an H1 halogen headlight bulb – whether for dipped beam, high beam, or fog lights. Please Note: Always confirm bulb type before purchase. Some high-spec models (e.g. Ford ST, VW GTI) may use a different fitment than base trims. ⚠️ CANBUS Warning: Some vehicles may display a dashboard error message after installing LEDs due to reduced power draw. This is a harmless effect. See our FAQs for easy solutions like resistors or error cancellers, if required. 🧠 Did You Know? OEM halogen H1 bulbs typically produce 1,200–1,500 lumens per bulb. CEUK’s Enhanced Edition H1 LEDs provide over 6x the brightness with significantly less heat. White 6000K lighting not only looks better, but it improves contrast on road markings, kerbs, and signs — helping reduce driver fatigue during night driving. 🎯 Perfect For: Daily Drivers who want better visibility Car Enthusiasts looking to modernise the look of their headlights DIY Modders wanting a true plug & play upgrade Show Builds that need a clean, bright, premium light output This item is also known as: Standard Trade Ref Base Type Watt H1 448 P14.5s 55w  

Read more less

Enhanced Edition H8/11 LED Fog Light Bulb V3 – 6000K Ice White + Colour Tint Kit Upgrade your visibility and style with the CEUK Enhanced Edition H8/11 LED Bulb V3, the ultimate plug-and-play LED upgrade for your fog lights or dipped beam. Designed for OEM-fit compatibility, this next-generation bulb delivers an ultra-bright 6000K Ice White beam with no wiring or modification needed – and includes tint options for complete visual customisation. 🔥 Why Choose the V3 H8/11 Bulb? 💡 6,000 Lumens per bulb (12,000Lm pair) 🧊 6000K Ice White output as standard 🟡 Tint Kit Included: 2x 3000K Yellow Film Wraps 2x 8000K Cool White/Blue Film Wraps 🔧 Fits all H8 and H11 bulb sockets 🧩 No adapters, clips or wiring required 🌟 Compatible with reflector & projector housings 🧠 Designed to reduce eye strain while improving night-time visibility ⚠️ Fitment Note: Ensure at least 1 inch of space behind the bulb in your housing for safe installation. ✅ What’s in the Box: 2x CEUK Enhanced H8 / H11 LED Bulbs (6000K Ice White Default) 2x 3000K Yellow Adhesive Films (Fog Style) 2x 8000K Blue-White Adhesive Films (Colder Tint) Installation Tips 12-Month CEUK Warranty (keep packaging if a longer warranty is stated) ⚙️ Technical Specifications: Spec Detail Voltage 12V Wattage 50W per bulb Lumen Output 6,000Lm per bulb Colour Temp 6000K (default), optional 3000K or 8000K via tint film Fitment H8 / H11 🚗 Vehicle Compatibility: Fits any vehicle using H8 or H11 bulbs in: ✅ Fog Lights ✅ Low Beam / Dipped Beam (space permitting) ⚠️ Note: Check for trim-specific variations (e.g., Ford ST, VW GTI) before ordering. Some modern vehicles may display a dashboard bulb warning due to low power draw. This is harmless and may require a resistor or decoder depending on your vehicle. See our FAQs for more help. 🧠 Did You Know? OEM halogen bulbs output roughly 1,200–1,500 lumens CEUK Enhanced LED Bulbs deliver over 4x the brightness Yellow tint boosts visibility in fog, rain or snow 8000K offers a distinct premium aesthetic for show or daily use 🎯 Perfect For: Drivers seeking maximum light output Customisation lovers who want style + function Fog light or dipped beam LED upgrades Cars with tight headlight units (space-saving design) This item is also known as: Standard Trade Ref Base Type Watt H8 708 PGJ19-1 35w H11 711 PGJ19-2 55w

Read more less

Enhanced Edition H7 LED Bulb V3 – 6000K Ice White + Tint Kit | 12,000Lm Output Take your headlights to the next level with CEUK's #Enhanced Edition H7 LED V3 Upgrade. Delivering powerful illumination with a sleek OEM-style fit, these bulbs are designed for drivers who demand maximum visibility, improved safety, and a customisable finish – all in one upgrade. Engineered to outperform traditional halogen and even most LED rivals, the V3 model is CEUK’s most advanced yet. 🔥 Why Choose the H7 LED V3? ✅ High Output – 12,000 Lumens (6,000 per bulb) ✅ 6000K Ice White Default Output – sharp, modern lighting 🎨 Custom Tint Kit Included: 2x 3000K Yellow Films (fog-style, ideal for poor weather) 2x 8000K Blue-White Films (cool show car aesthetic) ✅ Projector & Reflector Compatible ✅ DIY-Friendly Installation ✅ Improves Night-Time Visibility & Road Contrast ✅ Reduces Eye Strain During Driving ⚠️ Installation Notes & Fitment Considerations: Some vehicles may require LED adapter clips (Sold Seperately) – contact us if unsure. These bulbs include an integrated driver/heat sink – ensure sufficient space behind your headlight housing. If your model is tight on space, check fitment first by emailing support@ceuk.org. LED installation may trigger dash bulb-out warnings on some vehicles – this is harmless and easily resolved (see our FAQs). 📦 What’s in the Box: 2x CEUK Enhanced H7 LED Bulbs – 6000K Ice White (default) 2x 3000K Yellow Adhesive Tint Films 2x 8000K Blue-White Adhesive Tint Films Installation Tips 12-Month Warranty (Keep packaging if longer warranty is specified) ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Lumens 6,000 per bulb (12,000 total) Colour Temp 6000K standard, 3000K & 8000K via tint Fitment Type H7 (Standard Halogen Socket) 🚗 Vehicle Fitment Guidance: These bulbs are compatible with any H7-equipped vehicle, including: Ford, VW, BMW, Vauxhall, Audi, Mercedes, and more Suitable for headlights or fog lights (space-dependent) May require model-specific clips or holders 📌 Special trims (e.g. ST, GTI) may use different bulbs – always confirm your vehicle’s bulb type before purchase. 🧠 Did You Know? Standard halogen H7s typically produce ~1,200 lumens. CEUK’s V3 delivers up to 10x more light The included film kit means three beam colours in one product 3000K yellow is ideal for fog, rain, or snow 8000K blue is perfect for show use or premium aesthetics This item is also known as: Standard Trade Ref Base Type Watt H7 477 PX26d 50w

Read more less

IllumiNite White Halogen Fog & Cornering Bulb – 35W | 6500K Ice White Upgrade your visibility and style with CEUK’s IllumiNite White Halogen Bulb, part of our premium lighting range. Designed as a direct halogen replacement, this bulb delivers a crisp 6500K Ice White beam that enhances both form and function without needing any LED conversion. Ideal for use in fog light and cornering light applications, the IllumiNite range is your go-to choice for a factory-fit appearance with a significantly brighter, whiter output. Will also work fine as a dipped or main beam! 💡 Key Features: ✅ Direct Halogen Replacement – plug-and-play fitment ✅ 35W Output – legal and compatible with most factory housings ✅ 6500K Colour Temperature – pure Ice White finish ✅ Ideal for Fog & Cornering Lights ✅ OEM Fitment with Enhanced Brightness ✅ Long-Life Design with Stable Output 🔧 No wiring mods, resistors or adapters required – just remove the old bulb and install. ⚠️ Vehicle Fitment Notice: Compatible with most vehicles using H11 halogen fog or cornering bulbs Some trims (e.g., Ford ST, VW GTI) may use alternate light units – please verify bulb type before ordering For confirmation, check your vehicle manual or contact us at support@ceuk.org 🛡️ Warranty: 12-Month Warranty included as standard If a longer warranty is noted on the packaging, keep it safe as proof of eligibility This item is also known as: Standard Trade Ref Base Type Watt H11 711 PGJ19-2 55w

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

Front Splitter Ford Edge Sport Mk2 FITS ONLY:Ford Edge Sport Mk2 (2014-2019) COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black   CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. SHIPPING AND RETURNS

Read more less

Side Skirts Diffusers Ford Edge Sport Mk2 FITS ONLY:Ford Edge Sport Mk2 (2014-2019) COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black   CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided

Read more less

Central Rear Splitter (Vertical Bars) Ford Edge Sport Mk2 FITS ONLY:Ford Edge Sport Mk2 (2014-2019) COMPLETE SET CONTAINS:-> Rear Diffuser-> Fitting manualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided

Read more less

💡 Enhanced Edition H7 LED V2 Headlight Upgrade Say goodbye to dim, underperforming headlights and welcome next-level illumination with our H7 LED V2 Upgrade from the #Enhanced Edition range. Crafted for those who demand brilliant light output without compromising OEM fitment, these bulbs pack power, precision, and reliability into one sleek solution. 🚀 Vision, Without Restriction Engineered for maximum brightness and clarity: ✅ Plug-and-play design with OEM-level fitment 💥 20,000 Lumens Total (10,000 per bulb) 🔧 Works with both projector and reflector headlamp units 🌙 Reduces eye strain and improves visibility at night ❄️ 6000K Ice White colour for that clean, modern look ⚠️ Note: Due to the integrated driver and heat sink, check housing space before purchase. Some vehicles may require additional LED clips – sold separately. 📦 What’s in the Box? 2x H7 Enhanced Edition LED Bulbs (6000K Ice White) 💬 LED Clip Not Included(If your vehicle requires a clip, feel free to contact us to confirm before ordering.) ⚙️ Technical Specifications Voltage: 12V Wattage: 50W per bulb Lumens: 20,000 total (10,000 per bulb) Compatibility: Suitable for most vehicles using H7 fitment (please confirm before ordering) 📌 Vehicle Fitment Notes Some vehicles — particularly higher-spec models like Ford ST, VW GTi, etc. — may use different housings or mounting styles.We recommend double-checking your existing bulbs or contacting us to verify compatibility. ⚠️ Dashboard Error Warning: Some cars may display a harmless warning message when LEDs are installed. Please refer to our FAQ section for info and remedies. 🛡️ Warranty Info Backed by a 12-month guarantee as standard.If your packaging states a longer warranty, please retain it for proof of eligibility. This item is also known as: Standard Trade Ref Base Type H7 477 PX26d

Read more less

Rear Side Splitters V.2 Ford Edge Mk2 FITS ONLY:Ford Edge Mk2 (2014-2019)** Fits only with: FO-ED-2-RS1 **   COMPLETE SET CONTAINS:-> Diffusers(Left+Right)-> Mounting Kit-> Mounting ManualCHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  

Read more less

Rear Side Splitters V.1 Ford Edge Mk2 FITS ONLY:Ford Edge Mk2 (2014-2019)   COMPLETE SET CONTAINS:-> Diffusers(Left+Right)-> Mounting Kit-> Mounting ManualCHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Spoiler CAP Ford Edge Mk2 FITS ONLY:  Ford Edge Mk2 (2014-2019) Please Note:  ** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk ** COMPLETE SET CONTAINS:-> Spoiler Extension with 3M Tape-> Degreasing Cloth  CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.

Read more less

Front Splitter Ford Edge Mk2 FITS ONLY:Ford Edge Mk2 (2014-2019) COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual  CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Side Skirts Diffusers Ford Edge Mk2 FITS ONLY: Ford Edge Mk2 (2014-2019) COMPLETE SET CONTAINS:-> Side Skirt Splitters-> Mounting Kit-> Mounting Manual  CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

FITS ONLY:Ford Edge Mk2 (2014-2019) ** Fits original bumper, no modifications required ** COMPLETE SET CONTAINS: Rear Diffuser This product is an add-on to the original diffuser. We recommend using a strong adhesive to secure fitment, such as tiger sealant. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  

Read more less

Street PRO Rear Diffuser Ford Edge Mk2 Upgrade your Mk2 Ford Edge with this aggressive and functional Street PRO rear diffuser. Designed for perfect fitment and lasting performance, it's the ideal addition for enthusiasts seeking both style and substance. Fitment: ✔️ Ford Edge Mk2 (2014-2019) What’s Included: ✅ Maxton Racing Rear Diffuser ✅ Complete Mounting Kit Key Features & Benefits: Premium Material: Made from high-quality, 10mm thick ABS plastic for enhanced durability. Impact & Scratch Resistant: Built to withstand road debris and everyday wear. Unique Styling: Sleek and aggressive design for a standout rear end look. UV Protection: Coated to resist fading and sun damage. Weather-Resistant: Suitable for all climates and temperature ranges. Ready to Install: Comes with protective vacuum-sealed film—no painting required. Paintable Option: If desired, product can be painted (primer must be used first). Authenticity Guaranteed: Each part is labelled to confirm genuine Maxton Racing quality. Certified Quality: TUV MATERIALGUTACHTEN certified for material quality and safety.  

Read more less

3-Piece Trim Removal Tool Kit – Ideal for Fog Guards & Indicators Tackle those tricky trim jobs with confidence using our 3-Piece Trim Removal Tool Kit – a must-have for any enthusiast or DIY installer. These tools are especially handy for removing mirror caps, fog surrounds, and installing sequential indicators or fog light guards. Made from durable plastic, they're designed to protect your paintwork and trim from damage during removal. 🧰 Key Features: ✅ Set of 3 identical trim tools ✅ One narrow end per tool – perfect for tight spaces ✅ Ideal for mirror caps, fog light surrounds & delicate plastics ✅ Prevents scratches and scuffs on bodywork ✅ Trusted by CEUK team for installs! 🔩 Use For: Fog Light Guard installations Sequential Indicator installs Mirror Cap removal General interior or exterior trim jobs 📦 What’s in the Kit? 3x Trim Removal Tools (identical design, one narrow end each) 🛡️ Warranty Tools are non-electrical and do not carry a warranty – however, they are built to last for repeated use.

Read more less

H7 HID Replacement Bulb – 5000K / 6000K Options Need a fresh, reliable replacement for your existing HID kit?Our H7 HID Replacement Bulb is compatible with most HID systems – including CEUK Enhanced and Ultimate Kits – and is perfect if your current bulb has dimmed or stopped working. 🔧 Key Features: 🔄 Direct Replacement for most aftermarket HID kits 🌈 Available in 5000K (Pure White) or 6000K (Ice White) ⚡ 12v Compatible – Plug & play 💡 Ideal for restoring brightness and clarity 📦 What’s Included: 1x H7 HID Bulb in your selected colour temperature(Price is for a single bulb – order quantity 2 for a full headlamp set) This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🧠 Good to Know: 🔴 Live wire may be red or blue depending on batch – product performance is identical 🛠️ Not vehicle-specific – check your bulb fitment before ordering 🧰 Suitable for any standard H7 HID ballast setup 🛡️ Warranty: ✔️ 12 Months Warranty as standard📦 If packaging states longer, keep it safe to retain extended cover 🚗 Vehicle Fitment: While this bulb is compatible with most HID kits, always confirm your vehicle uses H7 fitment. Special editions (e.g. Ford ST, VW GTi) may differ in configuration.

Read more less

PLEASE CHECK YOUR KEY HOLE SECTION IS 20MM BEFORE ORDERING! 20mm gel badge which will cover the driver door key hole Fits the following models (may also fit others, please measure first): Fiesta Mk7 / 7.5 Focus Mk3 & 3.5

Read more less

CEUK ChromoLite Indicator Bulb Upgrade – Stealth Style, Orange Flash Say goodbye to the ugly orange tint of factory indicator bulbs! The CEUK ChromoLite Indicator Upgrade gives you a clean, modern look with mirror-finished bulbs that still flash bright amber when in use. 🔧 Key Features: 🪞 Stealth Chrome Finish – Disappears in the housing when off 🟠 Bright Amber Flash – No compromise on visibility or safety 💡 Offset Pin Fitment – Direct replacement for most OEM indicator bulbs 🚘 Improves Aesthetics – Removes unsightly orange glow from clear lenses ⚙️ Plug & Play – No wiring or resistors required in most cases 📦 What’s Included: 2x ChromoLite Offset Pin Indicator Bulbs 📌 Fitment Notes: These bulbs are offset pin fitment.Please ensure compatibility with your vehicle before purchasing. May fit many models across Ford, VW, Audi, BMW, and more. Some vehicles may vary by spec level (e.g., ST, GTi) – check your current bulb type or consult your handbook. This item is also known as: Standard Trade Ref Base Type 382 P21w / 1156 BA15s ⚠️ Dashboard Warning Notice: Installation of LEDs or reflective bulbs may trigger a dashboard error on some vehicles. This is harmless and simply due to the reduced power draw. Visit our FAQs for solutions. 🛡️ Warranty: Backed by CEUK’s 12-month guarantee. If your packaging states a longer coverage, please retain it for warranty validation.

Read more less

Chaser Edition Bluetooth Footwell Strip Kit – Universal Fit Bring your car's interior to life with the Chaser Edition LED Footwell Kit from CEUK — now available as a universal fit for any vehicle! Whether you're building ambience or making a statement, this kit gives your cabin an instant upgrade. 💡 Features: 🌈 600+ Static Colours 🎭 200+ Fluid/Dynamic Modes – Colour-changing, fading, dancing and more! 📲 Bluetooth App Controlled – Fully configurable from your smartphone 🔌 Ignition Powered – Lights turn on with your engine 🧠 Remembers Last Setting – Set it and forget it! 🔧 Installation Made Easy: Simply tell us your fuse type (Mini, Micro, Standard Blade etc.) in the order notes — we’ll do the rest!The kit plugs into your passenger footwell fuse box for power. Installation takes minutes. 📦 What’s in the Box? 1x Flexible Footwell LED Strip 1x Wiring Loom 1x Bluetooth Control Module 1x Instruction Sheet 🚫 Glove box strip not included. Catalogue images may show multiple model variants for reference only. 🚘 Vehicle Compatibility: ✅ Universal fitment – works on any 12v vehicle✅ Compatible with any car that has footwell fuse access❗ Just provide your fuse type when ordering to ensure the correct fit 🛡️ Warranty: Includes a 12-month guarantee as standard. If your packaging mentions a longer period, please keep it to validate extended coverage.

Read more less

Here we have a brand new product for the MK3.5 Focus including the ST/RS models. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Much thicker than other panels on the market and currently available in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. Carbon fibre, gloss black and textured panels are supplied ready to fit to the car. Fitment is straight forward and takes 15 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! The variances in the air conditioning piping has meant that we are offering this product with the option of a hole for the air conditioning pipe. Some of these pipes stick up further than others. If you opt not have the hole, this can result in a small gap (3-4mm) between the front of the headlight and the panel. We appreciate that some people will be happy with a small gap rather than a pipe sticking through slam panel (it looks cleaner without the hole). However, if you would prefer to have the hole we can drill this for you to order,  We can offer these painted or hydrodipped, please contact us for more details - support@ceuk.org

Read more less

  Here we have a brand new product for the pre-face lift MK3 Focus including the ST model. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Currently available to order in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. These panels have been designed for paint (smooth raw plastic) and are the only product on the market for this vehicle. Other finishes are ready to fit. These parts have been designed on a standard vehicle which has not suffered from any previous accident damage. Some adjustment may be needed to accommodate other after market parts inc aftermarket headlights. Fitment is straight forward and takes 25 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! Please note you will need to remove your bonnet sound pad to ensure it does not rub on the slam end panels. This is particularly relevant if you have selected the gloss black or carbon finished items. 

Read more less

Have you always got loose change rattling around in your cup holder or on your dash? Look no further than our re-launched coin holder! Designed to fit neatly into one of your cup holders, this little pot will keep your change safe and together. Available in lots of combinations with or without gel badge logo - please select from drop down menu.  Lids with no badge will be 'domed'.  Lids with badge will be flat with badge recess. Please note this item has been designed to fit in the circular cup holders within the Fiesta MK7/8 models. There are many different models that this holder fits because Ford has used a universal part across a lot of its models.  We will be adding to this list but currently the tried and test models are: Mk2 Focus MK3 Focus Mk3.5 Focus (Although it will fit in the adjustable cup holder found in the MK3.5 Focus it may not be as secure and may obstruct the sliding 'door') Mk2 Puma Mk6 Fiesta MK7 Fiesta MK7.5 Fiesta Mk8 Fiesta Corsa E VXR

Read more less