Performance - Ford Focus MK2 (2004-2010)

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

🛠️ CLEARANCE: Ford Performance Number Plate Surrounds – Red & White Logo (Pair) SLIGHT DEFECT – DIY CLEARANCE ITEM ⚠️ We've spotted a minor quality issue in the latest batch – so here's your chance to grab these Ford Performance plate surrounds at a discounted rate! 🙌 Due to slight mould bleed during production, some units have extra melted plastic around the clips. A quick trim with snips or a blade is all that’s needed. ✂️ 💥 These are ideal for DIYers or anyone happy to save money and do a quick tidy-up. 📦 Sold as a pair – one for the front and one for the rear. ✅ Product Highlights: 🔴⚪ Red & White Ford Performance Logo 🚘 Suitable for front or rear fitment 💪 Durable, tough plastic construction 🔧 Clearance units need trimming or minor clean-up ❌ Non-returnable clearance stock 🔩 Universal UK number plate size ⚠️ Defect Details Extra plastic on clip areas due to mould bleed Cosmetic quality is around 20% below usual CEUK standard Requires manual trimming or shaping These aren’t show car perfect out of the box – but perfect for daily drivers, stealth builds, or budget projects!

Read more less

CEUK Aluminium Door Lock Covers – Focus MK2 & MK2.5 (2004–2011) Add a premium touch to your Focus with these precision-fit aluminium door latch covers by CEUK – a sleek and simple upgrade that delivers big visual impact. 💎 Premium Quality, Built to Last 🛡️ CNC-machined from anodised aluminium – not cheap plastic 🔩 Secured using genuine 3M VHB tape – strong, weather-resistant hold 🎨 Anodised finish resists corrosion and adds a touch of colour 🧰 Installs in seconds – no tools or trimming needed 📦 What's Included 2x Door Lock Covers (Left & Right – Front Pair) Pre-applied 3M VHB Adhesive Tape Optional Rear Pair (Select at checkout if needed) 🚘 Vehicle Compatibility ✅ Ford Focus MK2 (2004–2008) ✅ Ford Focus MK2.5 Facelift (2008–2011) 🔍 May also fit other Ford models from this era – check latch size before ordering 🛠️ Installation Tips Clean latch area thoroughly with isopropyl alcohol before fitting Peel backing, align cover, and press firmly for 30 seconds Done – no tools, no mess!

Read more less

4D Replacement ST Badges – Fully Custom Acrylic Pair Say goodbye to dated chrome and red OEM ST badges and upgrade your style with our 4D Acrylic ST Badge Replacements – bold, clean, and completely customisable. 🛠️ Premium 4D Design – Built to Last ✂️ Laser-cut from 3mm Premium Acrylic (6mm total with layered colours) 🎨 Fully customisable – choose any backing and front colour combo 🧲 Pre-applied with 3M automotive-grade adhesive – ultra-strong, weatherproof 💎 Smooth edges for a flawless, high-end finish ❌ Not a gel overlay – these are full replacement units 📦 What’s Included 1x Small Front Badge 1x Large Rear Badge (OEM badges must be removed before fitting) ✅ Fitment & Compatibility These are designed to replace the standard Ford ST badges across multiple models. Universal fit – just remove old badges and stick directly in place using the supplied 3M tape. 🧽 Installation Notes Remove original badges using safe badge removal techniques Clean surface area thoroughly (use isopropyl alcohol for best adhesion) Peel, align, press – and you’re done!

Read more less

💡 Enhanced Edition H7 LED V2 Headlight Upgrade Say goodbye to dim, underperforming headlights and welcome next-level illumination with our H7 LED V2 Upgrade from the #Enhanced Edition range. Crafted for those who demand brilliant light output without compromising OEM fitment, these bulbs pack power, precision, and reliability into one sleek solution. 🚀 Vision, Without Restriction Engineered for maximum brightness and clarity: ✅ Plug-and-play design with OEM-level fitment 💥 20,000 Lumens Total (10,000 per bulb) 🔧 Works with both projector and reflector headlamp units 🌙 Reduces eye strain and improves visibility at night ❄️ 6000K Ice White colour for that clean, modern look ⚠️ Note: Due to the integrated driver and heat sink, check housing space before purchase. Some vehicles may require additional LED clips – sold separately. 📦 What’s in the Box? 2x H7 Enhanced Edition LED Bulbs (6000K Ice White) 💬 LED Clip Not Included(If your vehicle requires a clip, feel free to contact us to confirm before ordering.) ⚙️ Technical Specifications Voltage: 12V Wattage: 50W per bulb Lumens: 20,000 total (10,000 per bulb) Compatibility: Suitable for most vehicles using H7 fitment (please confirm before ordering) 📌 Vehicle Fitment Notes Some vehicles — particularly higher-spec models like Ford ST, VW GTi, etc. — may use different housings or mounting styles.We recommend double-checking your existing bulbs or contacting us to verify compatibility. ⚠️ Dashboard Error Warning: Some cars may display a harmless warning message when LEDs are installed. Please refer to our FAQ section for info and remedies. 🛡️ Warranty Info Backed by a 12-month guarantee as standard.If your packaging states a longer warranty, please retain it for proof of eligibility. This item is also known as: Standard Trade Ref Base Type H7 477 PX26d

Read more less

Enhanced Edition Boot LED Unit – 18 SMD Upgrade Is your standard boot light just not cutting it? Dim bulbs and weak LED swaps are a thing of the past. Introducing the Enhanced Edition Boot LED Replacement Unit – featuring a powerful 18 SMD array that directs light exactly where you need it. It’s up to 18x brighter than OEM and 5x brighter than typical LED bulb upgrades, transforming your boot into a well-lit space. ⚙️ Key Features ✅ 18 Ultra-Bright LEDs – All angled for optimal illumination ✅ Direct Plug-and-Play OEM replacement ✅ OEM Look, Enhanced Performance ✅ 12v / 5000K Cool White Output ✅ 501 T10 Fitment 🚗 Confirmed Fitment Fiesta MK6 (All models, incl. facelift) Fiesta MK7 (All models, incl. facelift) Fiesta MK8 (All models, incl. facelift) Focus MK1 (All models, incl. facelift) Focus MK2 (All models, incl. facelift) May fit other models using 501/T10 boot bulbs – check fitment before ordering This item is also known as: Standard Trade Ref Base Type 501 501 T10 W5W 🧰 What’s Included? 1x Enhanced Edition Boot LED Unit (18 SMD – 5000K White) 🔧 Installation No wiring or tools needed Direct swap for OEM boot bulb unit Plug in, snap into place, done in seconds! 🛡️ Warranty ✅ 12-Month Guarantee as standard For any extended warranty, product packaging must be retained if stated

Read more less

3-Piece Trim Removal Tool Kit – Ideal for Fog Guards & Indicators Tackle those tricky trim jobs with confidence using our 3-Piece Trim Removal Tool Kit – a must-have for any enthusiast or DIY installer. These tools are especially handy for removing mirror caps, fog surrounds, and installing sequential indicators or fog light guards. Made from durable plastic, they're designed to protect your paintwork and trim from damage during removal. 🧰 Key Features: ✅ Set of 3 identical trim tools ✅ One narrow end per tool – perfect for tight spaces ✅ Ideal for mirror caps, fog light surrounds & delicate plastics ✅ Prevents scratches and scuffs on bodywork ✅ Trusted by CEUK team for installs! 🔩 Use For: Fog Light Guard installations Sequential Indicator installs Mirror Cap removal General interior or exterior trim jobs 📦 What’s in the Kit? 3x Trim Removal Tools (identical design, one narrow end each) 🛡️ Warranty Tools are non-electrical and do not carry a warranty – however, they are built to last for repeated use.

Read more less

H7 HID Replacement Bulb – 5000K / 6000K Options Need a fresh, reliable replacement for your existing HID kit?Our H7 HID Replacement Bulb is compatible with most HID systems – including CEUK Enhanced and Ultimate Kits – and is perfect if your current bulb has dimmed or stopped working. 🔧 Key Features: 🔄 Direct Replacement for most aftermarket HID kits 🌈 Available in 5000K (Pure White) or 6000K (Ice White) ⚡ 12v Compatible – Plug & play 💡 Ideal for restoring brightness and clarity 📦 What’s Included: 1x H7 HID Bulb in your selected colour temperature(Price is for a single bulb – order quantity 2 for a full headlamp set) This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🧠 Good to Know: 🔴 Live wire may be red or blue depending on batch – product performance is identical 🛠️ Not vehicle-specific – check your bulb fitment before ordering 🧰 Suitable for any standard H7 HID ballast setup 🛡️ Warranty: ✔️ 12 Months Warranty as standard📦 If packaging states longer, keep it safe to retain extended cover 🚗 Vehicle Fitment: While this bulb is compatible with most HID kits, always confirm your vehicle uses H7 fitment. Special editions (e.g. Ford ST, VW GTi) may differ in configuration.

Read more less

CEUK ChromoLite Indicator Bulb Upgrade – Stealth Style, Orange Flash Say goodbye to the ugly orange tint of factory indicator bulbs! The CEUK ChromoLite Indicator Upgrade gives you a clean, modern look with mirror-finished bulbs that still flash bright amber when in use. 🔧 Key Features: 🪞 Stealth Chrome Finish – Disappears in the housing when off 🟠 Bright Amber Flash – No compromise on visibility or safety 💡 Offset Pin Fitment – Direct replacement for most OEM indicator bulbs 🚘 Improves Aesthetics – Removes unsightly orange glow from clear lenses ⚙️ Plug & Play – No wiring or resistors required in most cases 📦 What’s Included: 2x ChromoLite Offset Pin Indicator Bulbs 📌 Fitment Notes: These bulbs are offset pin fitment.Please ensure compatibility with your vehicle before purchasing. May fit many models across Ford, VW, Audi, BMW, and more. Some vehicles may vary by spec level (e.g., ST, GTi) – check your current bulb type or consult your handbook. This item is also known as: Standard Trade Ref Base Type 382 P21w / 1156 BA15s ⚠️ Dashboard Warning Notice: Installation of LEDs or reflective bulbs may trigger a dashboard error on some vehicles. This is harmless and simply due to the reduced power draw. Visit our FAQs for solutions. 🛡️ Warranty: Backed by CEUK’s 12-month guarantee. If your packaging states a longer coverage, please retain it for warranty validation.

Read more less

Chaser Edition Bluetooth Footwell Strip Kit – Universal Fit Bring your car's interior to life with the Chaser Edition LED Footwell Kit from CEUK — now available as a universal fit for any vehicle! Whether you're building ambience or making a statement, this kit gives your cabin an instant upgrade. 💡 Features: 🌈 600+ Static Colours 🎭 200+ Fluid/Dynamic Modes – Colour-changing, fading, dancing and more! 📲 Bluetooth App Controlled – Fully configurable from your smartphone 🔌 Ignition Powered – Lights turn on with your engine 🧠 Remembers Last Setting – Set it and forget it! 🔧 Installation Made Easy: Simply tell us your fuse type (Mini, Micro, Standard Blade etc.) in the order notes — we’ll do the rest!The kit plugs into your passenger footwell fuse box for power. Installation takes minutes. 📦 What’s in the Box? 1x Flexible Footwell LED Strip 1x Wiring Loom 1x Bluetooth Control Module 1x Instruction Sheet 🚫 Glove box strip not included. Catalogue images may show multiple model variants for reference only. 🚘 Vehicle Compatibility: ✅ Universal fitment – works on any 12v vehicle✅ Compatible with any car that has footwell fuse access❗ Just provide your fuse type when ordering to ensure the correct fit 🛡️ Warranty: Includes a 12-month guarantee as standard. If your packaging mentions a longer period, please keep it to validate extended coverage.

Read more less

✅ Revised Google-Friendly Description (Emoji-Free): IllumiNite D2S Bi-Xenon HID Bulb Upgrade – 6000K White Upgrade your visibility with IllumiNite D2S Bi-Xenon replacement bulbs — a direct plug-and-play solution for better night driving, combining improved performance with a crisp, modern look. Key Features: Delivers enhanced brightness over standard OEM bulbs Direct replacement – no modifications required 6000K crisp white output for a clean, contemporary appearance Suitable for projector headlight systems CANBUS-compatible – works with self-leveling headlight systems Improved visibility for safer night-time driving What’s in the Box: 2x D2S IllumiNite Bi-Xenon HID Bulbs (6000K) Technical Specifications: Voltage: 12V Power: 35W Colour Temperature: 6000K (Ice White) Fitment: D2S Type: Xenon / HID This item is also known as: Standard Trade Ref Base Type D2S 85122 / 66040 P32d-2 Warranty: 12-month guarantee included

Read more less

Upgrade Your Brake or Fog Light with the Enhanced Edition 382 LED Bulb!Bring your vehicle into the modern age with our high-performance 382 P21W BA15S LED bulb – the #Enhanced Edition. Designed for drivers who demand maximum brightness, efficiency, and reliability, this bulb is a must-have upgrade for safer and sharper lighting on the road. 🔧 Why Choose This LED Bulb? 💡 Super-Bright LED Output: Equipped with 30 high-intensity LEDs – 24 on the sides for all-round visibility and 6 projection LEDs at the tip for focused forward illumination. ⚡ Low Power, High Lumen: New-generation LEDs deliver more light using less power, improving efficiency without sacrificing performance. 🧠 CANBUS Error-Free: Compatible with 99% of vehicles without triggering dashboard errors – no need for resistors or extra coding. 🔄 Easy Plug-and-Play Installation: Direct replacement for standard 382 / P21W / BA15S single-filament bulbs – simply swap and go. 🚫 Important Fitment Notes: ❗ This bulb is for single-filament use only – it does NOT replace dual-filament (stop/tail) bulbs. 📋 Fitment can vary based on trim/spec level (e.g., Ford ST, VW GTi). Always confirm bulb type before ordering. ⚠️ Some vehicles may display a harmless error message due to LED power draw – check our FAQs for solutions. 🔄 Product Specifications: Bulb Type: 382 / P21W / BA15S LED Count: 30 LEDs (24 side + 6 front) Voltage: 12V CANBUS Compatibility: Yes – 99% of vehicles Warranty: 12 Months (retain packaging for extended warranty claims) This item is also known as: Standard Trade Ref Base Type 382 P21w / 1156 BA15s Upgrade your lighting with the confidence of quality, performance, and enhanced road visibility. 💪

Read more less

Struggling to See When Reversing?✅ It’s time for an #Enhanced Upgrade. Transform your vehicle's visibility with our powerful 382 P21W BA15S LED Reverse Light Bulbs – the Enhanced Edition, designed to outperform standard halogen units and help you reverse with confidence, even in total darkness. 💡 Key Features: 🔆 30 Ultra-Bright LEDs Per BulbIncludes 24 side-facing LEDs for full 360° light spread, plus 6 focused projection LEDs at the tip for maximum rearward reach.✔️ Ideal for reversing cameras and rear visibility. ⚡ Low Power, High Output DesignAdvanced LED technology delivers higher lumen output using less energy, protecting your vehicle’s electrical system while boosting brightness. 🧠 CANBUS Error-FreeWorks seamlessly with 99% of vehicles, preventing annoying dashboard warnings — no additional resistors or coding needed. 🛠️ Plug-and-Play InstallationDirect replacement for single-filament 382 / P21W / BA15S bulbs. No tools required. 💵 Sold as a PairYou're getting two bulbs per pack — one for each side of your vehicle. 📌 Important Compatibility Notes: 🔍 Single Filament Only – This bulb replaces single-function reverse bulbs only. It is not compatible with dual-function (e.g., tail/stop) bulbs. 🚘 Trim-Specific Fitment – Some trims like VW GTi or Ford ST may use alternate bulb types. Please verify bulb fitment before purchase. ⚠️ Dashboard Error Message? – A harmless side-effect of LED upgrades in rare vehicles. Refer to our FAQs for troubleshooting. ✅ Specs & Warranty: Bulb Type: 382 / P21W / BA15S Voltage: 12V CANBUS: Yes, error-free on 99% of vehicles Warranty: 12 Months (Extended warranty applies if stated on packaging; keep packaging for claims) This item is also known as: Standard Trade Ref Base Type 382 P21w / 1156 BA15s 🛒 Upgrade your reverse lights today with the Enhanced Edition LED Bulbs – better light, safer reversing, and modern performance you can count on. 💥 Brighten your exit – see the difference instantly.

Read more less

The All-New CEUK V2 Chaser Halo Kit Is Here – Stronger, Smarter & Sleeker Than Ever! Our popular Chaser Halo Kit just got a serious upgrade. The V2 edition keeps the same brilliant colour options and chasing effects, but now comes with enhanced durability, easier installation, and a sleek new look. Whether you're building a show car or upgrading your road presence, the V2 Chaser Halos deliver stunning visuals with robust build quality. 🌈 Features You’ll Love: 🎨 Over 400 Solid RGB Colours – Fully customizable to match your build 💫 200+ Chasing “Fluid” Modes – Create smooth transitions, strobes, pulses, and dynamic sequences 📱 Bluetooth Controlled – All settings managed via smartphone app 🔧 Easy to Install – Plug-and-play with clear instructions 💡 Ultra Bright Output – Visible day or night 🔧 What’s New in V2? ✅ All-New Acrylic Bezels – Sleek, modern, and more durable ✅ Waterproof IP65 RGB Connectors – No more tape, no more corrosion ✅ Fully Waterproof Bluetooth Receiver – Built to withstand the elements ✅ Dual-Core Insulated Cabling – Stronger, safer, and longer-lasting 📦 What’s in the Box? 2x RGB Halos with Classy Acrylic Bezels 1x Waterproof Bluetooth Receiver 1x Fused Wiring Loom with Ballast 1x 5A Fuse Full fitting instructions ⚙️ Technical Specs: Voltage: 12V Fuse: 5A Connectivity: Bluetooth Brightness: Ultra High Waterproof Rating: IP65+ 🚘 Vehicle Fitment Reminder: Some vehicles, especially performance trims like Ford ST or VW GTI, may use different lighting units than base models. Please confirm compatibility with your vehicle prior to ordering. 🛡️ Warranty: 12-Month CEUK Warranty as standard.(Extended warranties apply where stated on packaging – retain packaging as proof.) 🎯 Upgrade to the strongest, smartest halo lighting kit we’ve ever built.✅ CEUK V2 Chaser Halo Kit – Take control. Turn heads.

Read more less

Introducing the Ultimate Edition HID Kit from CEUK – Our Brightest HID Upgrade Ever! Struggling with poor visibility during night drives? The Ultimate Edition HID Conversion Kit is designed for drivers who demand maximum brightness, fast ignition, and premium reliability. Packed with cutting-edge features and powered by 55W Quick-Start 3-in-1 Ballasts, this is CEUK’s most advanced HID setup to date. 🔥 Top Features: ⚡ All-New 3-in-1 BallastsInstant ignition, built-in surge protection, and stable 55W output – brighter and faster than ever before. 💡 6000K HID BulbsProducing a crisp ice white beam, ideal for modern styling and optimal nighttime performance. 🚀 Up to 300m Improved VisibilitySignificantly increases distance and clarity compared to standard halogen or older HID kits. 🔟 10x Brighter Than HalogenSee more, react faster, and drive safer with dramatically improved road illumination. 📦 What’s in the Box? 2x 6000K HID Bulbs 2x 3-in-1 55W Ultimate Edition Ballasts 2x HID Mounting Brackets 2x 3M Foam Adhesive Pads Installation Guide ⚙️ Technical Specs: Output: 55W (Ballasts) Voltage: 12V Vehicle Systems Colour Temp: 6000K Ice White Compatibility: Suitable for most H-Series HID conversions 🔧 Fitment Note: Vehicle trim levels may vary (e.g. Ford ST, VW GTI), and some models may use different headlight or bulb types. Please check compatibility with your specific vehicle before ordering to ensure correct fitment. 🛡️ Warranty: Includes 12-month CEUK standard warranty.(If product packaging specifies a longer warranty, it must be retained as proof.) 💡 Get brighter, go further, and upgrade with confidence.🔧 CEUK Ultimate Edition HID – Built for those who refuse to compromise on visibility.

Read more less

LED Puddle Light with Coloured ST Logo – For MK2 Facelift & MK3 All Models Focus ST Add a bold, custom touch to your Focus ST with this full replacement LED puddle light unit, featuring a built-in projector that displays a striking Coloured “ST” logo onto the pavement every time you unlock or open your door. This is a fully sealed waterproof unit, designed for direct replacement OEM look once installed! 🔧 Key Features: Featuring a mini built-in projector, this unit casts a bold “ST” logo onto the pavement every time you open your door. Choose from: ⚪ White ST logo 🔵 Blue ST logo 🟢 Green ST Logo 🔴 All Red ST Logo Yellow ST Logo Tangerine ST Logo Orange ST Logo Magenta ST Logo Ultra Violet ST Logo Mint Green ST Logo Green-Yellow ST Logo Azure Blue ST Logo We've developed a fully interchangeable system, which means if you buy one colour from us (EG, Orange) and then 6 months down the line you change the colour theme of your car - we can supply you an interchangeable colour replacement and you can change your logo colour in seconds - a true WORLD FIRST! 🔌 Direct Plug & Play ReplacementNo cutting, drilling, or coding required – simply unplug your factory unit and connect this one in its place. 💡 Bright White LED IlluminationProvides better visibility when entering/exiting your car at night, while the coloured logo makes a strong visual statement. ✅ Fitment: Ford Focus MK2 Facelift ST models Ford Focus MK3 ST – all variants Note: This unit is designed specifically for ST trims of the MK2 (facelift) and MK3 Focus models. 📦 What’s Included: 1x LED Puddle Light Unit Pair with Coloured ST Logo Projector Pre-installed wiring and connector for direct installation 🛡️ Warranty: Covered by a 12-month CEUK standard warranty.(If your packaging states a longer warranty, retain it for proof in case of a claim.) 🔥 Light the ground with performance flair.Upgrade your side-entry style with CEUK’s ST puddle light today.

Read more less

Ford Performance Number Plate Surrounds – Multi-Colour Logo Options Available Give your Ford a sharp, motorsport-inspired finishing touch with these Ford Performance number plate surrounds. Designed to fit most standard UK plates, they add style, colour, and identity to any build – while ensuring a clean and secure plate fit for both front and rear. 🎨 Logo Colour Options: "FORD" – Always in White for a bold, clean finish "PERFORMANCE" available in: 🔵 Sky Blue (RAL 5015) 🟢 Mean Green (RAL 6018) 🟡 Primrose Yellow (RAL 1026) 🔴 Race Red 📦 Product Features: ✅ Sold as a Pair – One for front, one for rear. IF YOU WOULD LIKE SINGULAR- PLEASE EMAIL US: Support@ceuk.org 🧲 Secure Fit – Compatible with most UK standard registration plates ✨ High-Quality Finish – Durable materials with precision-printed logo 🔧 Tool-Free Opening Option –Can be opened using: An optional CEUK Key Tool (sold separately) A flat electrician’s screwdriver Or by pulling firmly by hand if you prefer 💡 Why Choose These Plate Holders? Add OEM+ styling and a personal touch to your Ford Built for long-lasting performance – no cheap printing or fading A simple, effective upgrade that makes a big visual difference 🎯 Perfect for show builds or everyday style.🔥 Ford Performance Plate Surrounds – Stand out, stay secure.

Read more less

V2 RS Logo Puddle Light Kit – For MK2 & MK3 Ford Focus RS Give your RS a standout touch with CEUK’s Version 2 full-replacement LED puddle lights, now better than ever. Designed for Focus RS MK2 and MK3 models, this upgraded kit delivers a bright blue RS logo with white border – now with improved durability and OEM-style aesthetics. 🔧 What’s New in Version 2? ✅ Traditional RS LogoNow in iconic blue with a white border, for that unmistakable RS identity. ✅ OEM-Style Matte Black HousingReplaces the outdated clear lens with a sleek black finish that blends seamlessly into your mirror. ✅ Fully Waterproof Projector DesignNo more condensation or water ingress – built to last in all weather conditions. 🌟 Key Features: 🔵 Bright Blue RS Logo ProjectionProjects a crisp logo onto the pavement every time you open the door. 🔄 Adjustable Logo OrientationUse the included tool to rotate the logo to your perfect angle – no matter how your mirrors are set. 🔌 True Plug-and-Play InstallationNo cutting, coding, or drilling required. Simply swap out your factory puddle lights and connect. 📦 What’s in the Box? 2x RS Logo Puddle Light Units (Left & Right) 1x Mini Screwdriver 1x Logo Orientation Tool 🚗 Vehicle Compatibility: Ford Focus RS MK2 Ford Focus RS MK3 🛡️ Warranty: Backed by a 12-month CEUK standard warranty(Retain packaging if longer warranty is stated on the box) 🔵 Subtle, stylish, and unmistakably RS.⚡ Upgrade your Focus with CEUK’s V2 puddle light kit – designed to impress, built to last.

Read more less

CEUK Enhanced Edition H7 HID Kit – MK4 Focus Exclusive Take your night-time visibility to the next level with the Enhanced Edition H7 HID Kit, developed specifically for the MK4 Ford Focus (2019+) without factory LED dipped beams. Engineered in-house by CEUK, this kit delivers powerful light output, improved road clarity, and low power consumption, all in one easy-to-fit package. ⚙️ What Makes It #Enhanced? ✅ 35W HID System – Efficient yet powerful 🌈 Colour Temp Options Available – Choose your preferred Kelvin range 🧩 Includes CEUK In-House Designed H7 HID Clip – Required for proper fitment (and included at no extra cost!) 🛠️ Vehicle-Specific Fit – Tailored for MK4 Focus headlights without LED factory lighting This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🔍 Light Colour Tips: 4500K – 6000K: Ideal for maximum visibility (pure white to ice white) Higher Kelvin = More Blue: While they may look cool, vision is reduced as colour temperature increases For best performance, stay within the 4500K–6000K range 📦 What’s in the Kit? 2x H7 HID Bulbs (Your choice of colour temp) 2x 35W HID Ballasts 2x CEUK Designed H7 HID Retaining Clips Full wiring and install support ⚠️ Fitment Notice: Designed for MK4 Ford Focus models without factory LED dipped beam Currently, you must cut a small hole in the headlight dust cover to run the cables, or remove the cover entirely(A custom CEUK cover is in development) 🛡️ Warranty: Covered by a 12-month CEUK standard warranty(If a longer warranty is stated on packaging, please retain packaging as proof) ⚖️ Protected Design: This kit includes CEUK components protected under British Copyright LawIntellectual Property Ownership Reference: 6086653 🌙 Brighter nights, bolder looks, and better performance – have you been #Enhanced?🔧 The best HID kit for MK4 Focus drivers who expect more.

Read more less

CEUK Enhanced Edition Sequential Indicator Units – For MK2 Focus (Facelift) & MK3 Focus (All Models) Give your Focus a sleek, modern upgrade with CEUK’s Enhanced Edition sequential mirror indicators – the perfect complement to our LED front and rear indicators. Designed for effortless installation, these full replacement units offer dynamic amber sequential lighting, a plug-and-play fit, and full CANBUS compatibility for error-free operation. 🔧 Key Features: 🔁 Amber Sequential Strobe EffectSmooth, flowing LED motion adds a high-end look and improved visibility. 🔌 Full Replacement UnitNo bulb swaps or lens mods – remove your OEM unit and replace it with this pre-built CEUK upgrade. ✅ CANBUS Error-FreeEngineered for compatibility with your Focus – no dashboard errors, no resistors required. 🧩 Simple Plug-and-Play InstallationDesigned for direct fitment without coding or rewiring. 📦 What’s Included: 1x Pair of CEUK Sequential Indicator Units (Left & Right)Pre-installed amber LEDs in custom-fit housings 🚗 Vehicle Compatibility: ✅ Ford Focus MK2 Facelift models ✅ Ford Focus MK3 All models and trims 🛡️ Warranty: Covered by a 12-month CEUK standard warranty(If your packaging specifies longer, please retain it for warranty support) 💡 Better Looks, cleaner design, and zero hassle.⚡ The Enhanced Edition – Made to match your build.

Read more less

Be Seen from Every Angle – CEUK Enhanced 380 Stop/Tail LED Bulbs Introducing the all-new 380 Stop/Tail LED Bulbs from CEUK – designed to dramatically improve the visibility and output of your rear lighting. These dual-function LEDs act as both your tail light and brake light, offering a crisp, bright red glow for safer, sharper signalling. 🔧 Key Features: 🔴 Dual-Function OutputActs as both a rear side/tail light and a stop/brake light – replacing your existing combo bulb. 💡 30 High-Powered Red LEDsEngineered for maximum brightness and clarity, even in daylight conditions. 🔥 Up to 90% Brighter than OEMImproved visibility means better safety – for you and everyone behind you. ⚡ Low Power ConsumptionLED efficiency helps reduce electrical load and prolong component life. ✅ CANBUS FriendlyCompatible with 99% of vehicles without triggering dash errors.* 🔌 Plug & Play InstallationInstalls in seconds with no modifications required. 📦 Specs & Fitment: Bulb Type: 380 / P21/5W / 1157 LED Count: 30 per bulb LED Colour: RED Voltage: 12V Sold as a PAIR This item is also known as: Standard Trade Ref Base Type 380 P21/5w / 1157 BAY15d ⚠️ Important Fitment Notes: These bulbs are for vehicles with stop/tail light function, where one bulb performs both side light and brake light roles. Some trims (e.g., Ford ST, VW GTi) may use different lighting units than standard models. Please check your existing bulb type before ordering. *Rarely, LEDs may trigger harmless dash messages in some vehicles – see our FAQs for solutions. 🛡️ Warranty: Backed by a 12-month CEUK warranty from the date of receipt(If packaging states longer, retain it as proof for extended warranty claims) 💡 Stronger signal. Sharper style. Reliable fitment.🔥 Upgrade to CEUK Stop/Tail LEDs and make every press of the pedal count.

Read more less

Introducing the CEUK #Enhanced Edition H4 LED Upgrade – Dip & Main Beam Performance Without Compromise Vision. Without Restriction.The #Enhanced H4 LED Headlight Bulb Kit offers unrivalled visibility, full control over colour temperature, and true plug-and-play convenience. Designed to fit in place of your OEM H4 bulb, this kit delivers a powerful 12,000-lumen output while remaining compatible with most headlight builds – including projector and reflector housings. 🔧 Key Features: 🔆 Ultra-High Output – 12,000 lumens (6,000 per bulb) for next-level road visibility ❄️ 6000K Ice White Default Colour – Clean and modern lighting for any build 🎨 Custom Colour Output with DIY Tint Film – Switch to: 3000K Yellow (ideal for fog or snow) 8000K White/Blue (stylish xenon-style glow) 🔌 Plug-and-Play Installation – DIY-friendly design with OEM-style fit 🌙 Reduced Eye Strain – Better beam pattern helps reduce glare and night-driving fatigue 🔄 Integrated Driver & Heat Dissipation Unit – Built into rear housing for compact installation Note: Some vehicles may require an additional clip for secure installation. Contact CEUK directly to confirm compatibility with your car. 📦 What’s in the Box? 2x H4 #Enhanced LED Bulb Units (6000K default) 2x Yellow Tint Films (3000K) 2x White/Blue Tint Films (8000K)(HID clip not included – available separately if required) ⚙️ Technical Specifications: Voltage: 12V Wattage: 50W per bulb Total Lumens: 12,000 (6,000 per bulb) Fitment: H4 Compatibility: Projector & Reflector Headlamps This item is also known as: Standard Trade Ref Base Type H4 472 P43t ⚠️ Fitment Notes: This bulb has a built-in rear heat sink/driver. If your headlight housing is particularly tight, please check fitment before purchasing. Some vehicles (e.g., performance trims like Ford ST or VW GTi) may require different clips or mounts. LED upgrades may occasionally trigger a dashboard error message – a harmless side effect of the low power draw. Visit our FAQ page for easy solutions. 🛡️ Warranty: Backed by CEUK’s 12-month warranty(Retain packaging if an extended warranty is stated) 💥 Take control of your light. Take control of your drive.⚡ CEUK #Enhanced H4 LED Kit – When performance meets personalisation.

Read more less

CEUK Full Replacement LED Mirror Puddle Light – For MK2 & MK3 Ford Focus Upgrade your side-entry visibility with the latest full LED mirror puddle light unit from CEUK. Designed as a complete plug-and-play replacement, this upgraded unit delivers significantly brighter output, better durability, and a fully sealed waterproof design — all in a 5-minute install. Developed by the same team behind our best-selling number plate units, this light is built to outperform. 🔧 Key Features: 🔆 Ultra Bright OutputFitted with extra LED chips to deliver maximum light coverage when entering/exiting your vehicle. 🔌 Plug & Play Installation501 fitment. No tools or modifications required – installs in under 5 minutes. 🛡️ Fully Sealed, Waterproof UnitNow supplied with a rubber bung to seal where the cable enters the unit – protecting against water ingress and extending lifespan. ⚡ Low Power Draw, High EfficiencyDraws less power than halogen, while providing a far brighter result. ✅ Error-Free OperationDesigned to work CANBUS-safe on most vehicles – no dashboard errors or coding required. 📦 Specs: Fitment: 501 Voltage: 12V LED Type: High-output white SMD chips Installation: Direct replacement for OEM puddle lights Included: Rubber cable-sealing bung 🚗 Vehicle Compatibility: Ford Focus MK2 (All Facelift models) Ford Focus MK3 (All models and trims) Note: Some special editions (e.g., ST or RS) may use different fitments – please verify before purchase. 🛡️ Warranty: Backed by a 12-month CEUK standard warranty(Retain packaging if a longer warranty is stated) 🌙 Brighten every step – with style, performance, and durability.⚡ CEUK LED Puddle Light Unit – A small change that makes a big difference.

Read more less

Ultra Bright T20 LED Reverse Light Bulb – 33SMD Power & Error-Free Performance Increase your rear visibility with the CEUK T20 LED Reverse Light, designed for maximum brightness and OEM+ reliability. Built with 33 surface-mounted LEDs (SMDs), this unit delivers superior light output while maintaining full CANBUS compatibility on most vehicles. Perfect for reversing at night or in low-light environments, especially on Ford Ranger T6 Facelift models. 🔧 Key Features: 🔆 33 High-Output SMD LEDs – Delivers an intense, wide-spread white beam for improved safety ⚠️ Error-Free Performance – Designed to work with most CANBUS systems without triggering warnings 🔌 T20 Base (7440 Fitment) – Direct replacement for factory halogen bulbs 🛻 Ideal for Ford Ranger T6 Facelift – Tested for compatibility and performance 🧩 Plug & Play – No coding, no fuss ✅ Sold Individually – Add 2 to your basket for a full set 📦 Specs: Fitment: T20 / 7440 LED Type: 33SMD Voltage: 12V Compatibility: Most vehicles with T20 reverse light sockets Sold As: Single unit (1 bulb) 🛡️ Warranty: Backed by CEUK’s 12-month standard warranty(Retain packaging if a longer warranty is stated) 🚗 Vehicle Fitment Note: Some vehicles, especially special editions (e.g., Ford ST or VW GTi), may use different light units or bulb types. Please confirm the correct fitment for your vehicle before purchasing. Dashboard Error Messages? LED upgrades can sometimes trigger harmless warnings – check our FAQs for solutions. ⚡ Brighter reverse lighting starts here. Upgrade with CEUK’s T20 33SMD LED for powerful, clear output when you need it most.

Read more less