Performance - Ford Focus MK2 (2004-2010)

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our MK2 RS modified splitter, Specifically styled design that follows the curves and angles of the front bumper. The modified was designed for those with the lowered RS, sitting flush against the bumper and sitting higher than the original version.   This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our MK2 RS Standard front splitter is the original design, Specifically styled design that follows the curves and angles of the front bumper. The Standard leaves a gap between the bumper and the splitter making it lower varient for the MK2 RS.  This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.   Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.Please note - We advise to use a small amount of polyurethane (such as tigerseal) adhesive to help secure the brows when fitting.

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat.This diffuser fits into place and requires the use of the two original fixings.This product may require some trimming / sanding to ensure the perfect fit and we advise for the perfect finish to have the product sprayed gloss black.Fitting guidance1 - Make sure the clips are sanded down to a thickness of around 4mm max2 - Lube up the clip area on the cars bumper, all the way around the clip section (WD40)3 - Take a blunt screw driver or such like to the clip section on the bumper and prise open the clips holes (don’t worry they shouldn’t break, the plastic clip section on the bumper will form its original shape once you have fitted the diffuser) Doing this will help the clips slot in as they are bigger than the original clips.4- Start from one end of the diffuser, you will notice once a few clips are in it will become a bit tougher, as you get to the tight/tougher area of the diffuser you’ll need a hand pushing from behind the bumper and the other pushing against the diffuser, forcing the diffuser into the bumper 5- If the clips look like are not lining up, lift the diffuser upwards whilst still pushing against the bumper.You may need to repeat step 5 for all the clips across the top section of the diffuser, the more clips you get in the easier it becomes and it should end up in place towards the last few clips.Please try to ignore the fact it looks like it doesn’t fit.. It does

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK2.5 ST V2 front splitter, Specifically styled design that Follows the front bumpers curves. The V2 front splitter is the higher level splitter option and is more suited to the lowered Focus ST's. If you are wanting to acheive the lower appearance on your ST225 then check out the V1   This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Elevate your Ford Focus MK2.5 ST225 with our Rear Spats. These finishing touches add a stylish, sleek design to your car. Make heads turn and stand out on the road with these must-have accessories! Supplied in a gloss black gel coat and with a full stainless steel fixing kit ready to fit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK2.5 ST front splitter, Specifically styled design that follows the curves of the front bumper. This splitter will add around 2" to the centre section of the bumper, giving the ST's front end a lower stance.   This front splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

The Ford Focus MK2 / MK2.5 ST225 Spoiler lip is the ultimate upgrade for any car enthusiast! Its subtle yet effective design adds an exaggerated touch of style to your ride, making it stand out from the crowd. Upgrade your car's look with this must-have accessory. Please Note: Due to the manufacturing method of this part it may require prepping and painting for the perfect finish. This part will require bonding on to the spoiler using a polyurethane adhesive (such as tigerseal).

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper Our Ford Focus MK2 ST Pre facelift front splitter, Specifically styled design that follows the curves of the front bumper. This product is manufactured utilising time proven composite technology.This front splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Upgrade your Ford Focus MK2 / MK2.5 ST225 / MK2 Zetec S with our sleek side skirt splitters. These splitters not only enhance the OEM+ appearance of your car, but also provide improved aerodynamics for a more efficient ride. Make a statement on the road with our high-quality design. Get yours now! Manufactured from fibreglass and supplied as pictured in a gloss black gel coat ready to fit. They also come with a full stainless steel fixing kit.

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Set of 4 Vinyl Stickers – Interior or Exterior Use | Approx. 3cm Add a custom touch to your build with this set of 4 high-quality vinyl stickers, suitable for both interior and exterior use. Whether you’re customising your dash, windows, mirrors, engine bay, or even toolboxes – the possibilities are endless. These decals are approx. 3cm in size, making them perfect for subtle but stylish placement anywhere on your vehicle or gear. Key Features: Pack of 4 Vinyl Stickers Weather-Resistant – safe for exterior use (UV and water resistant) Versatile – ideal for glass, bodywork, interiors, laptops, tools & more Size: Approx. 3cm diameter Easy to Apply – peel and stick with strong adhesive backing Perfect for adding small but eye-catching details to your project.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Custom 4D Number Plate Tags – Pair | Fully Legal | Any Colour & Logo Add a bold, custom touch to your UK number plates with our CEUK 4D Number Plate Tags – fully road legal and made to match or enhance your 4D plates. These are not just stickers – they’re premium, 3mm acrylic tags with a raised 4D effect, available in any colour and logo combination you choose. Designed to stick to the left side of your number plate using weatherproof backing tape, these tags offer a fully customisable and stylish upgrade that complies with UK number plate regulations. ✅ Key Features: Sold as a Pair – includes 2x matching tags 100% Road Legal – 50mm wide to comply with DVLA size regulations Fully Customisable:• Choose tag colour• Choose logo/emblem• Choose logo orientation• Choose logo colour Weatherproof & Durable – designed to last in UK conditions Easy Fit – pre-applied adhesive for quick install 🛠️ Size Options: Option 1 – Standard Plates (No Frame): • H 110mm x W 50mm x T 3mm• Designed to fully cover the corner of any number plate without a frame Option 2 – Plates with Surround Frame: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit inside plate frames (may leave a small border) 💡 Note: Fit may vary slightly due to universal design. See product images for visual examples. Looking for something completely custom? Contact us at support@ceuk.org and our in-house design team will be happy to help you create a truly unique tag!

Read more less

Custom 4D Number Plate Tags – Fully Legal Acrylic Pair | Multiple Colours & Logos Take your number plate styling to the next level with CEUK’s Custom 4D Number Plate Tags – designed to perfectly complement 4D number plates, but also compatible with any standard UK number plate. Crafted from 3mm premium acrylic, these tags are 100% road legal at just 50mm wide, and adhere easily to the left-hand side of your plate using pre-applied, weatherproof adhesive backing. Sold as a pair (2 tags), each set is fully customisable to match your build’s style. 🎨 Customisation Options: Choose your tag colour Choose your logo or emblem Choose the logo orientation Choose the logo colour 📏 Size Options: Option 1 – For Plates Without Frames: • H 110mm x W 50mm x T 3mm• Designed to fully cover the plate’s left edge — ideal for plates fitted directly to the car. Option 2 – For Plates With Surround/Holder: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit cleanly within most number plate holders (see sizing disclaimer below). ✅ Key Features: Sold as a pair (2 tags included) Legal under UK number plate regulations Premium laser-cut acrylic (3mm thick) Weatherproof adhesive – pre-applied for easy install Designed and made in the UK by CEUK Perfect for adding personal or branded touches to your plate setup ⚠️ Disclaimer: Full-size tag (Option 1) is universal and may slightly overlap corners depending on plate shape — designed to fully cover edge areas. Smaller tag (Option 2) may leave a 1–2mm border between the tag and frame depending on your holder’s dimensions. 📩 Want Something Completely Custom? No problem — just email support@ceuk.org, and our design team will help bring your idea to life.

Read more less

Custom Acrylic Door Sills – Non-Illuminated | Universal Fit for 3 & 5 Door Vehicles For nearly a decade, CEUK has led the way in illuminated door sills—but we know not everyone wants lighting. Some customers simply want a sleek, personalised door sill to enhance their entry experience. That’s why we created the CEUK Custom Acrylic Door Sill Plates (Non-Illuminated) — the same premium aesthetic, without the lights. Crafted from dual-layer premium acrylic, each sill features a 2mm gloss black base (hidden once installed) and a 3mm coloured faceplate of your choice. Add custom accents, your logo, and even select the colour of each design element to truly make it yours. 🧩 What's Customisable? Face Plate Colour – visible top colour (Matte Black recommended for contrast) Accent Colour – styling lines or graphics to the sides of the logo Logo Colour – central text or emblem colour ✨ Fully custom designs available – email support@ceuk.org to get started! 📦 Product Details: Sold as a Pair – Includes 2x sill plates Material: Premium Acrylic (5mm total thickness) Easy Install – Pre-applied 3M backing tape Universal Fit – Suitable for all 3-door and 5-door vehicles Non-Illuminated – Pure style, no wiring required Made to Order – Please allow 1–2 working days lead time during busy periods 📏 Size Options: Size Width Height Thickness Standard 50cm / 500mm 5cm / 50mm 0.5cm / 5mm Extended 60cm / 600mm 5cm / 50mm 0.5cm / 5mm   ✅ Installation: Clean and dry the surface thoroughly Peel backing from pre-fitted 3M adhesive Press into place and admire the upgrade 📩 Want something truly one-of-a-kind? Drop us a message at support@ceuk.org with your design ideas and we’ll give you a quote for a custom sill plate build!

Read more less

  Tidy up your interior with our set of 4 seat rail end covers (for the front of the front seats only). Please note these are to fit the seat rail ends from the Recaro seats fitted in the Mk2.5 Focus RS. Available in a selection of plastic colours/finishes. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

CEUK Fog Guards – Rounded Fog Light Covers for Ford | Gloss Black ABS | LED Only ⚠️ IMPORTANT: This product is compatible ONLY with LED fog light bulbs.Standard halogen bulbs emit too much heat and may damage the guards.By purchasing, you confirm your vehicle is fitted with LED fog lights. 🛡️ Style + Protection = #Enhanced Upgrade your fog light styling while adding a layer of protection with the CEUK Rounded Fog Guards, compatible with all Ford models featuring circular fog lights, including 60mm and 70mm variants. Made from vacuum-formed ABS and finished in premium gloss black, these guards are the perfect blend of aggressive styling and practicality. ✅ Key Features: Compatible with all Ford models with round fog lights• Supports both 60mm and 70mm covers Premium ABS Construction – vacuum-formed and CNC cut Gloss Black Finish – sleek and stealthy with a choice of 3 designs Secure “2Secure” Fitment – held in place with gel strips + fog light surround Zero Light Bleed – full-coverage design eliminates rings and gaps Made in the UK – proudly designed and manufactured in North England 💡 Why Ours Is Better: No ugly centre gel dot like other brands No risk of loss – held tightly by both adhesive and the fog bezel No light ring/halo – full-diameter design blocks bleed 3 Stylish Designs – all finished in gloss black for a factory-plus look 📦 What’s in the Kit: 2x Fog Guards (Left & Right) 6x Pre-cut Double Sided Gel Strips (Self-Application) Instruction Guide Optional Fitting Kit: Includes alcohol wipe & trim removal tool 🚗 Confirmed Fitment: Ford Fiesta MK6 – All Models Ford Fiesta MK7 – All Models Ford Focus MK2 – All Models Ford Focus MK3 – Pre-Facelift with Round Fogs Only Ford Transit Custom – Pre-Facelift Ford Transit Connect – All Models Other Ford vehicles with round fog lights (within reason – contact us to check) 🛠️ Installation: Clean the area with alcohol wipe (included in fitting kit) Apply gel strips to back of each guard Press guard firmly over fog light Refit surround – done in minutes!

Read more less

3D / 4D Acrylic Number Plate Frame – Customisable Plate Holder | CEUK Add the finishing touch to your build with the CEUK 3D / 4D Number Plate Frame – a premium acrylic surround that turns your number plate into a standout styling element. Built from 3 precision-cut acrylic layers, this custom frame brings dimension, colour, and detail to both front and rear plates. Price is for one frame. To style both front and rear, please order Qty: 2 🧩 Frame Composition (3-Piece Design): Backing Base Plate – for structure and support Frame Surround – high-gloss black, included as standard Coloured Insert – with or without cut-out logo• If a logo is selected, a second coloured inlay is fitted behind the cut-out for a clean, professional finish 🎨 You Choose the Look: Insert Colour – match your build’s theme Logo (if desired) – choose from available options Logo Colour – fully customisable Logos are cut into the insert and backed with a second coloured acrylic to ensure a seamless 3D/4D effect – Where this is not possible, a vinyl insert will be used. ✅ Key Features: Designed to fit standard UK number plates High-gloss black surround for a sleek, uniform look Acrylic construction – premium finish and durability Fully customisable design Strong, weatherproof adhesive fitment (fitting kit optional) No drilling required – prevents cracking of acrylic 🛠️ Fitting Notes: Stick-on only – due to the nature of acrylic, drilling is not recommended Use gel or foam double-sided tape to secure the number plate into the frame Then apply the assembled frame to the vehicle with strong adhesive For more security or uneven surfaces, add our optional fitting kit (includes pre-cut acrylic adhesive tabs) ⚠️ Important Fitment Info: Must be applied to a flat surface For rear bumpers with recessed mounting holes, use the fitting kit for best results Not recommended for mesh or honeycomb grilles due to limited contact area Ensure the surface is properly cleaned and prepped before application CEUK cannot be held responsible for lost or damaged plates due to improper fitting 💬 Want Something Custom? Contact us via Email or WhatsApp for bespoke designs. We’re happy to help if we can! Additional costs may apply for fully custom work.

Read more less

Currently made to order, please allow 2-3 weeks before dispatch. AutoSpecialists Design extended wheel arches for the Focus ST 225 (Pre-Facelift) Suitable for the Focus MK2 ST 225 5-door Pre-Facelift to fit with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Registered Design Right number: 6044470 Part no: ASDFO18

Read more less

AutoSpecialists Design WRC style bonnet vents. Available for Focus MK2 pre-facelift. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Supplied with cutting templates.  Please note: Mesh not included. Registered Design Right number 6016416

Read more less

  AutoSpecialists Design WRC style bonnet vents. Available for Focus MK2 Facelift (INC RS) **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Please note: Mesh not included. Registered Design Right number 6021160  

Read more less

AutoSpecialists Design Focus RS Mk2 Spoiler Lip Finished in a high quality gel coat ready to paint, designed to fit over the standard spoiler. Please note: We cannot guarantee security, double-sided tape can be at risk of lifting when using a jet wash or when travelling at high speed. Bonding the spoiler lip is recommended to ensure it doesn’t lift or come off. **IMPORTANT** Unpainted, comes finished in white or black coating. comes with no adhesive- will need to source your own.  We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Part no: ASDFO24

Read more less

Enhanced Edition H1 LED Headlight Bulbs – 6000K Ice White | 20,000Lm | Direct Fit Experience unmatched brightness and clarity with the CEUK Enhanced Edition H1 LED Bulbs – designed for performance, built for simplicity. This powerful LED upgrade delivers a sharp, clean 6000K ice white output with a total output of 20,000 lumens, offering a drastic improvement over standard halogen H1 bulbs. ⚠️ Important: These are not suitable for cornering light applications. 🚀 Vision, Without Restriction We've engineered a direct-fit, no-fuss H1 LED solution that doesn't require any wire splicing, adapters, or awkward metal clips. Unlike many aftermarket options, CEUK’s H1 LEDs are built to fit into standard halogen bulb slots using the existing connectors and mounting points — just like OEM. Perfect for night drives, low-light conditions, or simply modernising your lighting setup, these bulbs are ideal for those who want high performance without the hassle. 💡 Why Upgrade to CEUK H1 LEDs? ✅ Direct OEM Fit – No clips, wiring mods, or converters ✅ 6000K Ice White Output – Modern, premium look ✅ Up to 20,000 Lumens Total Output – Huge visibility gain ✅ 50W Power Draw Per Bulb – Bright, but safe for OEM harnesses ✅ Projector & Reflector Compatible – Versatile installation ✅ No Flickering or Overheating – Optimised for daily driving ✅ Reduced Eye Strain – Crisp light that mimics daylight ✅ Quick & Easy Install – Designed with DIY installers in mind ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Colour Temp 6000K (Ice White) Brightness 10,000Lm per bulb (20,000Lm total) Fitment H1 (Standard Halogen Socket) 📦 What You’ll Receive: 2x CEUK Enhanced Edition H1 LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (keep original packaging if longer warranty is stated) Support from our UK-based team if you need fitting advice 🔧 Vehicle Compatibility: This product is suitable for any vehicle using an H1 halogen headlight bulb – whether for dipped beam, high beam, or fog lights. Please Note: Always confirm bulb type before purchase. Some high-spec models (e.g. Ford ST, VW GTI) may use a different fitment than base trims. ⚠️ CANBUS Warning: Some vehicles may display a dashboard error message after installing LEDs due to reduced power draw. This is a harmless effect. See our FAQs for easy solutions like resistors or error cancellers, if required. 🧠 Did You Know? OEM halogen H1 bulbs typically produce 1,200–1,500 lumens per bulb. CEUK’s Enhanced Edition H1 LEDs provide over 6x the brightness with significantly less heat. White 6000K lighting not only looks better, but it improves contrast on road markings, kerbs, and signs — helping reduce driver fatigue during night driving. 🎯 Perfect For: Daily Drivers who want better visibility Car Enthusiasts looking to modernise the look of their headlights DIY Modders wanting a true plug & play upgrade Show Builds that need a clean, bright, premium light output This item is also known as: Standard Trade Ref Base Type Watt H1 448 P14.5s 55w  

Read more less