Performance - Ford Focus MK2 (2004-2010)

Enhanced Edition H1 LED Headlight Bulbs – 6000K Ice White | 20,000Lm | Direct Fit Experience unmatched brightness and clarity with the CEUK Enhanced Edition H1 LED Bulbs – designed for performance, built for simplicity. This powerful LED upgrade delivers a sharp, clean 6000K ice white output with a total output of 20,000 lumens, offering a drastic improvement over standard halogen H1 bulbs. ⚠️ Important: These are not suitable for cornering light applications. 🚀 Vision, Without Restriction We've engineered a direct-fit, no-fuss H1 LED solution that doesn't require any wire splicing, adapters, or awkward metal clips. Unlike many aftermarket options, CEUK’s H1 LEDs are built to fit into standard halogen bulb slots using the existing connectors and mounting points — just like OEM. Perfect for night drives, low-light conditions, or simply modernising your lighting setup, these bulbs are ideal for those who want high performance without the hassle. 💡 Why Upgrade to CEUK H1 LEDs? ✅ Direct OEM Fit – No clips, wiring mods, or converters ✅ 6000K Ice White Output – Modern, premium look ✅ Up to 20,000 Lumens Total Output – Huge visibility gain ✅ 50W Power Draw Per Bulb – Bright, but safe for OEM harnesses ✅ Projector & Reflector Compatible – Versatile installation ✅ No Flickering or Overheating – Optimised for daily driving ✅ Reduced Eye Strain – Crisp light that mimics daylight ✅ Quick & Easy Install – Designed with DIY installers in mind ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Colour Temp 6000K (Ice White) Brightness 10,000Lm per bulb (20,000Lm total) Fitment H1 (Standard Halogen Socket) 📦 What You’ll Receive: 2x CEUK Enhanced Edition H1 LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (keep original packaging if longer warranty is stated) Support from our UK-based team if you need fitting advice 🔧 Vehicle Compatibility: This product is suitable for any vehicle using an H1 halogen headlight bulb – whether for dipped beam, high beam, or fog lights. Please Note: Always confirm bulb type before purchase. Some high-spec models (e.g. Ford ST, VW GTI) may use a different fitment than base trims. ⚠️ CANBUS Warning: Some vehicles may display a dashboard error message after installing LEDs due to reduced power draw. This is a harmless effect. See our FAQs for easy solutions like resistors or error cancellers, if required. 🧠 Did You Know? OEM halogen H1 bulbs typically produce 1,200–1,500 lumens per bulb. CEUK’s Enhanced Edition H1 LEDs provide over 6x the brightness with significantly less heat. White 6000K lighting not only looks better, but it improves contrast on road markings, kerbs, and signs — helping reduce driver fatigue during night driving. 🎯 Perfect For: Daily Drivers who want better visibility Car Enthusiasts looking to modernise the look of their headlights DIY Modders wanting a true plug & play upgrade Show Builds that need a clean, bright, premium light output This item is also known as: Standard Trade Ref Base Type Watt H1 448 P14.5s 55w  

Read more less

The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better! Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models. The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky. AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance. The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination. Please note, this currently only fits AIRTEC’s Group A induction kit. Kit includes: 1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black 3x Billet alloy spacers and stainless-steel fittings Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models AIRTEC part no: ATMSFO45

Read more less

Enhanced Edition H8/11 LED Fog Light Bulb V3 – 6000K Ice White + Colour Tint Kit Upgrade your visibility and style with the CEUK Enhanced Edition H8/11 LED Bulb V3, the ultimate plug-and-play LED upgrade for your fog lights or dipped beam. Designed for OEM-fit compatibility, this next-generation bulb delivers an ultra-bright 6000K Ice White beam with no wiring or modification needed – and includes tint options for complete visual customisation. 🔥 Why Choose the V3 H8/11 Bulb? 💡 6,000 Lumens per bulb (12,000Lm pair) 🧊 6000K Ice White output as standard 🟡 Tint Kit Included: 2x 3000K Yellow Film Wraps 2x 8000K Cool White/Blue Film Wraps 🔧 Fits all H8 and H11 bulb sockets 🧩 No adapters, clips or wiring required 🌟 Compatible with reflector & projector housings 🧠 Designed to reduce eye strain while improving night-time visibility ⚠️ Fitment Note: Ensure at least 1 inch of space behind the bulb in your housing for safe installation. ✅ What’s in the Box: 2x CEUK Enhanced H8 / H11 LED Bulbs (6000K Ice White Default) 2x 3000K Yellow Adhesive Films (Fog Style) 2x 8000K Blue-White Adhesive Films (Colder Tint) Installation Tips 12-Month CEUK Warranty (keep packaging if a longer warranty is stated) ⚙️ Technical Specifications: Spec Detail Voltage 12V Wattage 50W per bulb Lumen Output 6,000Lm per bulb Colour Temp 6000K (default), optional 3000K or 8000K via tint film Fitment H8 / H11 🚗 Vehicle Compatibility: Fits any vehicle using H8 or H11 bulbs in: ✅ Fog Lights ✅ Low Beam / Dipped Beam (space permitting) ⚠️ Note: Check for trim-specific variations (e.g., Ford ST, VW GTI) before ordering. Some modern vehicles may display a dashboard bulb warning due to low power draw. This is harmless and may require a resistor or decoder depending on your vehicle. See our FAQs for more help. 🧠 Did You Know? OEM halogen bulbs output roughly 1,200–1,500 lumens CEUK Enhanced LED Bulbs deliver over 4x the brightness Yellow tint boosts visibility in fog, rain or snow 8000K offers a distinct premium aesthetic for show or daily use 🎯 Perfect For: Drivers seeking maximum light output Customisation lovers who want style + function Fog light or dipped beam LED upgrades Cars with tight headlight units (space-saving design) This item is also known as: Standard Trade Ref Base Type Watt H8 708 PGJ19-1 35w H11 711 PGJ19-2 55w

Read more less

Enhanced Edition H7 LED Bulb V3 – 6000K Ice White + Tint Kit | 12,000Lm Output Take your headlights to the next level with CEUK's #Enhanced Edition H7 LED V3 Upgrade. Delivering powerful illumination with a sleek OEM-style fit, these bulbs are designed for drivers who demand maximum visibility, improved safety, and a customisable finish – all in one upgrade. Engineered to outperform traditional halogen and even most LED rivals, the V3 model is CEUK’s most advanced yet. 🔥 Why Choose the H7 LED V3? ✅ High Output – 12,000 Lumens (6,000 per bulb) ✅ 6000K Ice White Default Output – sharp, modern lighting 🎨 Custom Tint Kit Included: 2x 3000K Yellow Films (fog-style, ideal for poor weather) 2x 8000K Blue-White Films (cool show car aesthetic) ✅ Projector & Reflector Compatible ✅ DIY-Friendly Installation ✅ Improves Night-Time Visibility & Road Contrast ✅ Reduces Eye Strain During Driving ⚠️ Installation Notes & Fitment Considerations: Some vehicles may require LED adapter clips (Sold Seperately) – contact us if unsure. These bulbs include an integrated driver/heat sink – ensure sufficient space behind your headlight housing. If your model is tight on space, check fitment first by emailing support@ceuk.org. LED installation may trigger dash bulb-out warnings on some vehicles – this is harmless and easily resolved (see our FAQs). 📦 What’s in the Box: 2x CEUK Enhanced H7 LED Bulbs – 6000K Ice White (default) 2x 3000K Yellow Adhesive Tint Films 2x 8000K Blue-White Adhesive Tint Films Installation Tips 12-Month Warranty (Keep packaging if longer warranty is specified) ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Lumens 6,000 per bulb (12,000 total) Colour Temp 6000K standard, 3000K & 8000K via tint Fitment Type H7 (Standard Halogen Socket) 🚗 Vehicle Fitment Guidance: These bulbs are compatible with any H7-equipped vehicle, including: Ford, VW, BMW, Vauxhall, Audi, Mercedes, and more Suitable for headlights or fog lights (space-dependent) May require model-specific clips or holders 📌 Special trims (e.g. ST, GTI) may use different bulbs – always confirm your vehicle’s bulb type before purchase. 🧠 Did You Know? Standard halogen H7s typically produce ~1,200 lumens. CEUK’s V3 delivers up to 10x more light The included film kit means three beam colours in one product 3000K yellow is ideal for fog, rain, or snow 8000K blue is perfect for show use or premium aesthetics This item is also known as: Standard Trade Ref Base Type Watt H7 477 PX26d 50w

Read more less

IllumiNite White Halogen Fog & Cornering Bulb – 35W | 6500K Ice White Upgrade your visibility and style with CEUK’s IllumiNite White Halogen Bulb, part of our premium lighting range. Designed as a direct halogen replacement, this bulb delivers a crisp 6500K Ice White beam that enhances both form and function without needing any LED conversion. Ideal for use in fog light and cornering light applications, the IllumiNite range is your go-to choice for a factory-fit appearance with a significantly brighter, whiter output. Will also work fine as a dipped or main beam! 💡 Key Features: ✅ Direct Halogen Replacement – plug-and-play fitment ✅ 35W Output – legal and compatible with most factory housings ✅ 6500K Colour Temperature – pure Ice White finish ✅ Ideal for Fog & Cornering Lights ✅ OEM Fitment with Enhanced Brightness ✅ Long-Life Design with Stable Output 🔧 No wiring mods, resistors or adapters required – just remove the old bulb and install. ⚠️ Vehicle Fitment Notice: Compatible with most vehicles using H11 halogen fog or cornering bulbs Some trims (e.g., Ford ST, VW GTI) may use alternate light units – please verify bulb type before ordering For confirmation, check your vehicle manual or contact us at support@ceuk.org 🛡️ Warranty: 12-Month Warranty included as standard If a longer warranty is noted on the packaging, keep it safe as proof of eligibility This item is also known as: Standard Trade Ref Base Type Watt H11 711 PGJ19-2 55w

Read more less

Genuine Ford Agate Black Touch Up Pen  this kit includes 1x Paint Colour and 1x Clear Coat Called a touch up pen however this is a small bottle with a brush on the lid!

Read more less

The All New Enhanced Edition Sequential Indicator Unit from CEUK for the Focus MK2 A perfect complement to our LED front and rear indicator upgrades. This full plug and play unit is installed by simply removing the OEM bulb and lens, and replacing it with our complete CEUK Enhanced Unit — no wiring or modifications required. Featuring amber sequential strobing, the built-in LED strip flows smoothly from left to right when activated, giving your Focus a modern, aggressive lighting signature. Fully CANBUS friendly and E-marked, this is a premium-quality upgrade that outperforms overseas alternatives in both style and durability. ✅ Key Features: Amber sequential LED strobing Plug & play installation – no coding or modification required CANBUS friendly – no error messages E-Marked for road use Superior build quality vs. imported alternatives 🔧 Fitment: Ford Focus MK2 (2004–2007)(Fits all variants within this generation) 📦 What's in the Box: 2x Sequential Indicator Units (Left & Right) Pre-installed LED strip Installation instructions 🛡️ Warranty: Supplied with a 12-month warranty as standard. If your packaging indicates a longer warranty, please keep it as proof to retain coverage.

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

🛠️ CLEARANCE: Ford Performance Number Plate Surrounds – Red & White Logo (Pair) SLIGHT DEFECT – DIY CLEARANCE ITEM ⚠️ We've spotted a minor quality issue in the latest batch – so here's your chance to grab these Ford Performance plate surrounds at a discounted rate! 🙌 Due to slight mould bleed during production, some units have extra melted plastic around the clips. A quick trim with snips or a blade is all that’s needed. ✂️ 💥 These are ideal for DIYers or anyone happy to save money and do a quick tidy-up. 📦 Sold as a pair – one for the front and one for the rear. ✅ Product Highlights: 🔴⚪ Red & White Ford Performance Logo 🚘 Suitable for front or rear fitment 💪 Durable, tough plastic construction 🔧 Clearance units need trimming or minor clean-up ❌ Non-returnable clearance stock 🔩 Universal UK number plate size ⚠️ Defect Details Extra plastic on clip areas due to mould bleed Cosmetic quality is around 20% below usual CEUK standard Requires manual trimming or shaping These aren’t show car perfect out of the box – but perfect for daily drivers, stealth builds, or budget projects!

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER38 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER38

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats   Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats    Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number: ATMER37

Read more less

Check out this super wall placque from our friends over at Willows World Made from 3mm Cast Acrylic, This is a dual layer sign with superb quality. The backing of the sign in your chosen colour to give you the colour of vehicle, then a gloss black vehicle outline is attached over the front to give the look of your chosen car! This sign is 198mm Tall by 596mm Wide. Simply choose your background colour to give you the car colour of your choice! This is a fabulous gift for someone, or perfect for an avid fan of this specific vehicle!

Read more less

CEUK Aluminium Door Lock Covers – Focus MK2 & MK2.5 (2004–2011) Add a premium touch to your Focus with these precision-fit aluminium door latch covers by CEUK – a sleek and simple upgrade that delivers big visual impact. 💎 Premium Quality, Built to Last 🛡️ CNC-machined from anodised aluminium – not cheap plastic 🔩 Secured using genuine 3M VHB tape – strong, weather-resistant hold 🎨 Anodised finish resists corrosion and adds a touch of colour 🧰 Installs in seconds – no tools or trimming needed 📦 What's Included 2x Door Lock Covers (Left & Right – Front Pair) Pre-applied 3M VHB Adhesive Tape Optional Rear Pair (Select at checkout if needed) 🚘 Vehicle Compatibility ✅ Ford Focus MK2 (2004–2008) ✅ Ford Focus MK2.5 Facelift (2008–2011) 🔍 May also fit other Ford models from this era – check latch size before ordering 🛠️ Installation Tips Clean latch area thoroughly with isopropyl alcohol before fitting Peel backing, align cover, and press firmly for 30 seconds Done – no tools, no mess!

Read more less

4D Replacement ST Badges – Fully Custom Acrylic Pair Say goodbye to dated chrome and red OEM ST badges and upgrade your style with our 4D Acrylic ST Badge Replacements – bold, clean, and completely customisable. 🛠️ Premium 4D Design – Built to Last ✂️ Laser-cut from 3mm Premium Acrylic (6mm total with layered colours) 🎨 Fully customisable – choose any backing and front colour combo 🧲 Pre-applied with 3M automotive-grade adhesive – ultra-strong, weatherproof 💎 Smooth edges for a flawless, high-end finish ❌ Not a gel overlay – these are full replacement units 📦 What’s Included 1x Small Front Badge 1x Large Rear Badge (OEM badges must be removed before fitting) ✅ Fitment & Compatibility These are designed to replace the standard Ford ST badges across multiple models. Universal fit – just remove old badges and stick directly in place using the supplied 3M tape. 🧽 Installation Notes Remove original badges using safe badge removal techniques Clean surface area thoroughly (use isopropyl alcohol for best adhesion) Peel, align, press – and you’re done!

Read more less

💡 Enhanced Edition H7 LED V2 Headlight Upgrade Say goodbye to dim, underperforming headlights and welcome next-level illumination with our H7 LED V2 Upgrade from the #Enhanced Edition range. Crafted for those who demand brilliant light output without compromising OEM fitment, these bulbs pack power, precision, and reliability into one sleek solution. 🚀 Vision, Without Restriction Engineered for maximum brightness and clarity: ✅ Plug-and-play design with OEM-level fitment 💥 20,000 Lumens Total (10,000 per bulb) 🔧 Works with both projector and reflector headlamp units 🌙 Reduces eye strain and improves visibility at night ❄️ 6000K Ice White colour for that clean, modern look ⚠️ Note: Due to the integrated driver and heat sink, check housing space before purchase. Some vehicles may require additional LED clips – sold separately. 📦 What’s in the Box? 2x H7 Enhanced Edition LED Bulbs (6000K Ice White) 💬 LED Clip Not Included(If your vehicle requires a clip, feel free to contact us to confirm before ordering.) ⚙️ Technical Specifications Voltage: 12V Wattage: 50W per bulb Lumens: 20,000 total (10,000 per bulb) Compatibility: Suitable for most vehicles using H7 fitment (please confirm before ordering) 📌 Vehicle Fitment Notes Some vehicles — particularly higher-spec models like Ford ST, VW GTi, etc. — may use different housings or mounting styles.We recommend double-checking your existing bulbs or contacting us to verify compatibility. ⚠️ Dashboard Error Warning: Some cars may display a harmless warning message when LEDs are installed. Please refer to our FAQ section for info and remedies. 🛡️ Warranty Info Backed by a 12-month guarantee as standard.If your packaging states a longer warranty, please retain it for proof of eligibility. This item is also known as: Standard Trade Ref Base Type H7 477 PX26d

Read more less

AutoSpecialists Design extended wheel arches for the Focus RS MK2 Suitable for the Focus RS MK2 to fit with standard front bumpers. Registered Design Right number 6023917 Part no: ASDFO14 TECHNICAL DATA AutoSpecialists Design extended wheel arches for the Focus RS MK2 Suitable for the Focus RS MK2 to fit with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Registered Design Right number 6023917 Part no: ASDFO14

Read more less

Description  Please note if you select the 'RS' variant two of the panels will be 'frames' shaped around the factory fitted bonnet vents.  If you select 'All Other Variants' these parts will be supplied as full plates Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 14 piece Under Bonnet Panel set. Supplied in a range of plastic finishes, these parts are available with or without double sided tape as some customers prefer to fit the parts with sealant or their own adhesive tape.   CNC machined from high quality plastic these panels are much lighter than the stainless steel mirrored plates on the market reducing the risk of them dropping off and also the additional weight on the bonnet. These parts should fit any variant of Mk2.5 Focus but please double check the underside of your bonnet before purchasing and contact us if unsure. These parts are made from 2mm plastic material so can easily be cut if you have had aftermarket bonnet vents fitted. Please note the reflective finish on the Chrome variants may be slightly different to other metal products on the market - please see photos.   Guaranteed fit for Ford Focus Mk2.5 Ford Focus Mk2.5 Diesel Ford Focus Mk2.5 RS Ford Focus Mk2.5 ST

Read more less

Enhanced Edition Boot LED Unit – 18 SMD Upgrade Is your standard boot light just not cutting it? Dim bulbs and weak LED swaps are a thing of the past. Introducing the Enhanced Edition Boot LED Replacement Unit – featuring a powerful 18 SMD array that directs light exactly where you need it. It’s up to 18x brighter than OEM and 5x brighter than typical LED bulb upgrades, transforming your boot into a well-lit space. ⚙️ Key Features ✅ 18 Ultra-Bright LEDs – All angled for optimal illumination ✅ Direct Plug-and-Play OEM replacement ✅ OEM Look, Enhanced Performance ✅ 12v / 5000K Cool White Output ✅ 501 T10 Fitment 🚗 Confirmed Fitment Fiesta MK6 (All models, incl. facelift) Fiesta MK7 (All models, incl. facelift) Fiesta MK8 (All models, incl. facelift) Focus MK1 (All models, incl. facelift) Focus MK2 (All models, incl. facelift) May fit other models using 501/T10 boot bulbs – check fitment before ordering This item is also known as: Standard Trade Ref Base Type 501 501 T10 W5W 🧰 What’s Included? 1x Enhanced Edition Boot LED Unit (18 SMD – 5000K White) 🔧 Installation No wiring or tools needed Direct swap for OEM boot bulb unit Plug in, snap into place, done in seconds! 🛡️ Warranty ✅ 12-Month Guarantee as standard For any extended warranty, product packaging must be retained if stated

Read more less

3-Piece Trim Removal Tool Kit – Ideal for Fog Guards & Indicators Tackle those tricky trim jobs with confidence using our 3-Piece Trim Removal Tool Kit – a must-have for any enthusiast or DIY installer. These tools are especially handy for removing mirror caps, fog surrounds, and installing sequential indicators or fog light guards. Made from durable plastic, they're designed to protect your paintwork and trim from damage during removal. 🧰 Key Features: ✅ Set of 3 identical trim tools ✅ One narrow end per tool – perfect for tight spaces ✅ Ideal for mirror caps, fog light surrounds & delicate plastics ✅ Prevents scratches and scuffs on bodywork ✅ Trusted by CEUK team for installs! 🔩 Use For: Fog Light Guard installations Sequential Indicator installs Mirror Cap removal General interior or exterior trim jobs 📦 What’s in the Kit? 3x Trim Removal Tools (identical design, one narrow end each) 🛡️ Warranty Tools are non-electrical and do not carry a warranty – however, they are built to last for repeated use.

Read more less

This side stripe follows the upper fold line of the doors and body, cutting through the door handle(s) Available plain or with various Logo's / text cut into the stripe to reveal the body colour underneath Fits all models of the 3 door Mk2 & 2.5 Focus Cut to shape ready for install

Read more less

Rear Quarter decal set for mk2.5 Focus RS (may fit other models with same bumper design) Comes in 4 parts (2 pieces per side) Available in Many colours

Read more less

H7 HID Replacement Bulb – 5000K / 6000K Options Need a fresh, reliable replacement for your existing HID kit?Our H7 HID Replacement Bulb is compatible with most HID systems – including CEUK Enhanced and Ultimate Kits – and is perfect if your current bulb has dimmed or stopped working. 🔧 Key Features: 🔄 Direct Replacement for most aftermarket HID kits 🌈 Available in 5000K (Pure White) or 6000K (Ice White) ⚡ 12v Compatible – Plug & play 💡 Ideal for restoring brightness and clarity 📦 What’s Included: 1x H7 HID Bulb in your selected colour temperature(Price is for a single bulb – order quantity 2 for a full headlamp set) This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🧠 Good to Know: 🔴 Live wire may be red or blue depending on batch – product performance is identical 🛠️ Not vehicle-specific – check your bulb fitment before ordering 🧰 Suitable for any standard H7 HID ballast setup 🛡️ Warranty: ✔️ 12 Months Warranty as standard📦 If packaging states longer, keep it safe to retain extended cover 🚗 Vehicle Fitment: While this bulb is compatible with most HID kits, always confirm your vehicle uses H7 fitment. Special editions (e.g. Ford ST, VW GTi) may differ in configuration.

Read more less

PLEASE CHECK YOUR KEY HOLE SECTION IS 20MM BEFORE ORDERING! 20mm gel badge which will cover the driver door key hole Fits the following models (may also fit others, please measure first): Fiesta Mk7 / 7.5 Focus Mk3 & 3.5

Read more less

CEUK ChromoLite Indicator Bulb Upgrade – Stealth Style, Orange Flash Say goodbye to the ugly orange tint of factory indicator bulbs! The CEUK ChromoLite Indicator Upgrade gives you a clean, modern look with mirror-finished bulbs that still flash bright amber when in use. 🔧 Key Features: 🪞 Stealth Chrome Finish – Disappears in the housing when off 🟠 Bright Amber Flash – No compromise on visibility or safety 💡 Offset Pin Fitment – Direct replacement for most OEM indicator bulbs 🚘 Improves Aesthetics – Removes unsightly orange glow from clear lenses ⚙️ Plug & Play – No wiring or resistors required in most cases 📦 What’s Included: 2x ChromoLite Offset Pin Indicator Bulbs 📌 Fitment Notes: These bulbs are offset pin fitment.Please ensure compatibility with your vehicle before purchasing. May fit many models across Ford, VW, Audi, BMW, and more. Some vehicles may vary by spec level (e.g., ST, GTi) – check your current bulb type or consult your handbook. This item is also known as: Standard Trade Ref Base Type 382 P21w / 1156 BA15s ⚠️ Dashboard Warning Notice: Installation of LEDs or reflective bulbs may trigger a dashboard error on some vehicles. This is harmless and simply due to the reduced power draw. Visit our FAQs for solutions. 🛡️ Warranty: Backed by CEUK’s 12-month guarantee. If your packaging states a longer coverage, please retain it for warranty validation.

Read more less