Performance - Mercedes B Class (W245) 2005-2011

Enhanced Edition H8/H11 Mini LED Bulbs – Ultra Bright, Compact Fit (6000K Ice White, 6000Lm) All the power of our V3 LED bulb – in a sleek, compact design.Introducing the CEUK Enhanced Edition H8/H11 Mini LED Bulbs, engineered for maximum output and perfect fitment in tight headlight or fog light housings. These bulbs deliver a massive 6000Lm per bulb and feature a compact heat management system – ideal for modern vehicles where space is limited. Compatible with H8 and H11 fitments, these bulbs are perfect for fog lights, dipped beams, or high beam upgrades, delivering clear, crisp 6000K Ice White light with superior reliability. 💡 Key Features: 6000Lm Output Per Bulb – 6x brighter than most OEM halogens Ultra-Compact Design – mini cooling fan built into the shaft, no bulky heat sink Plug & Play Fitment – no adapters, clips, or caps needed 12V, 28W Power Efficiency Zero Polarity Issues – works in any orientation Suitable for Projector & Reflector Housings Safe for OEM Components – no CANBUS interference on most vehicles ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K Ice White Lumen Output: 6000Lm per bulb Fitment: H8 / H11 📦 What’s in the Box: 2x H8/H11 Enhanced Edition LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (retain packaging if warranty is extended) ⚠️ Fitment Note: Always double-check your vehicle's bulb type – special editions (e.g., Ford ST, VW GTI) may differ from standard specs. Some vehicles may display a dashboard error message when LEDs are installed – this is harmless and addressed in our FAQs. This item is also known as: Standard Trade Ref Base Type Watt H8 708 PGJ19-1 35w H11 711 PGJ19-2 55w

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Enhanced Edition H1 LED Headlight Bulbs – 6000K Ice White | 20,000Lm | Direct Fit Experience unmatched brightness and clarity with the CEUK Enhanced Edition H1 LED Bulbs – designed for performance, built for simplicity. This powerful LED upgrade delivers a sharp, clean 6000K ice white output with a total output of 20,000 lumens, offering a drastic improvement over standard halogen H1 bulbs. ⚠️ Important: These are not suitable for cornering light applications. 🚀 Vision, Without Restriction We've engineered a direct-fit, no-fuss H1 LED solution that doesn't require any wire splicing, adapters, or awkward metal clips. Unlike many aftermarket options, CEUK’s H1 LEDs are built to fit into standard halogen bulb slots using the existing connectors and mounting points — just like OEM. Perfect for night drives, low-light conditions, or simply modernising your lighting setup, these bulbs are ideal for those who want high performance without the hassle. 💡 Why Upgrade to CEUK H1 LEDs? ✅ Direct OEM Fit – No clips, wiring mods, or converters ✅ 6000K Ice White Output – Modern, premium look ✅ Up to 20,000 Lumens Total Output – Huge visibility gain ✅ 50W Power Draw Per Bulb – Bright, but safe for OEM harnesses ✅ Projector & Reflector Compatible – Versatile installation ✅ No Flickering or Overheating – Optimised for daily driving ✅ Reduced Eye Strain – Crisp light that mimics daylight ✅ Quick & Easy Install – Designed with DIY installers in mind ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Colour Temp 6000K (Ice White) Brightness 10,000Lm per bulb (20,000Lm total) Fitment H1 (Standard Halogen Socket) 📦 What You’ll Receive: 2x CEUK Enhanced Edition H1 LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (keep original packaging if longer warranty is stated) Support from our UK-based team if you need fitting advice 🔧 Vehicle Compatibility: This product is suitable for any vehicle using an H1 halogen headlight bulb – whether for dipped beam, high beam, or fog lights. Please Note: Always confirm bulb type before purchase. Some high-spec models (e.g. Ford ST, VW GTI) may use a different fitment than base trims. ⚠️ CANBUS Warning: Some vehicles may display a dashboard error message after installing LEDs due to reduced power draw. This is a harmless effect. See our FAQs for easy solutions like resistors or error cancellers, if required. 🧠 Did You Know? OEM halogen H1 bulbs typically produce 1,200–1,500 lumens per bulb. CEUK’s Enhanced Edition H1 LEDs provide over 6x the brightness with significantly less heat. White 6000K lighting not only looks better, but it improves contrast on road markings, kerbs, and signs — helping reduce driver fatigue during night driving. 🎯 Perfect For: Daily Drivers who want better visibility Car Enthusiasts looking to modernise the look of their headlights DIY Modders wanting a true plug & play upgrade Show Builds that need a clean, bright, premium light output This item is also known as: Standard Trade Ref Base Type Watt H1 448 P14.5s 55w  

Read more less

Enhanced Edition H8/11 LED Fog Light Bulb V3 – 6000K Ice White + Colour Tint Kit Upgrade your visibility and style with the CEUK Enhanced Edition H8/11 LED Bulb V3, the ultimate plug-and-play LED upgrade for your fog lights or dipped beam. Designed for OEM-fit compatibility, this next-generation bulb delivers an ultra-bright 6000K Ice White beam with no wiring or modification needed – and includes tint options for complete visual customisation. 🔥 Why Choose the V3 H8/11 Bulb? 💡 6,000 Lumens per bulb (12,000Lm pair) 🧊 6000K Ice White output as standard 🟡 Tint Kit Included: 2x 3000K Yellow Film Wraps 2x 8000K Cool White/Blue Film Wraps 🔧 Fits all H8 and H11 bulb sockets 🧩 No adapters, clips or wiring required 🌟 Compatible with reflector & projector housings 🧠 Designed to reduce eye strain while improving night-time visibility ⚠️ Fitment Note: Ensure at least 1 inch of space behind the bulb in your housing for safe installation. ✅ What’s in the Box: 2x CEUK Enhanced H8 / H11 LED Bulbs (6000K Ice White Default) 2x 3000K Yellow Adhesive Films (Fog Style) 2x 8000K Blue-White Adhesive Films (Colder Tint) Installation Tips 12-Month CEUK Warranty (keep packaging if a longer warranty is stated) ⚙️ Technical Specifications: Spec Detail Voltage 12V Wattage 50W per bulb Lumen Output 6,000Lm per bulb Colour Temp 6000K (default), optional 3000K or 8000K via tint film Fitment H8 / H11 🚗 Vehicle Compatibility: Fits any vehicle using H8 or H11 bulbs in: ✅ Fog Lights ✅ Low Beam / Dipped Beam (space permitting) ⚠️ Note: Check for trim-specific variations (e.g., Ford ST, VW GTI) before ordering. Some modern vehicles may display a dashboard bulb warning due to low power draw. This is harmless and may require a resistor or decoder depending on your vehicle. See our FAQs for more help. 🧠 Did You Know? OEM halogen bulbs output roughly 1,200–1,500 lumens CEUK Enhanced LED Bulbs deliver over 4x the brightness Yellow tint boosts visibility in fog, rain or snow 8000K offers a distinct premium aesthetic for show or daily use 🎯 Perfect For: Drivers seeking maximum light output Customisation lovers who want style + function Fog light or dipped beam LED upgrades Cars with tight headlight units (space-saving design) This item is also known as: Standard Trade Ref Base Type Watt H8 708 PGJ19-1 35w H11 711 PGJ19-2 55w

Read more less

Enhanced Edition H7 LED Bulb V3 – 6000K Ice White + Tint Kit | 12,000Lm Output Take your headlights to the next level with CEUK's #Enhanced Edition H7 LED V3 Upgrade. Delivering powerful illumination with a sleek OEM-style fit, these bulbs are designed for drivers who demand maximum visibility, improved safety, and a customisable finish – all in one upgrade. Engineered to outperform traditional halogen and even most LED rivals, the V3 model is CEUK’s most advanced yet. 🔥 Why Choose the H7 LED V3? ✅ High Output – 12,000 Lumens (6,000 per bulb) ✅ 6000K Ice White Default Output – sharp, modern lighting 🎨 Custom Tint Kit Included: 2x 3000K Yellow Films (fog-style, ideal for poor weather) 2x 8000K Blue-White Films (cool show car aesthetic) ✅ Projector & Reflector Compatible ✅ DIY-Friendly Installation ✅ Improves Night-Time Visibility & Road Contrast ✅ Reduces Eye Strain During Driving ⚠️ Installation Notes & Fitment Considerations: Some vehicles may require LED adapter clips (Sold Seperately) – contact us if unsure. These bulbs include an integrated driver/heat sink – ensure sufficient space behind your headlight housing. If your model is tight on space, check fitment first by emailing support@ceuk.org. LED installation may trigger dash bulb-out warnings on some vehicles – this is harmless and easily resolved (see our FAQs). 📦 What’s in the Box: 2x CEUK Enhanced H7 LED Bulbs – 6000K Ice White (default) 2x 3000K Yellow Adhesive Tint Films 2x 8000K Blue-White Adhesive Tint Films Installation Tips 12-Month Warranty (Keep packaging if longer warranty is specified) ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Lumens 6,000 per bulb (12,000 total) Colour Temp 6000K standard, 3000K & 8000K via tint Fitment Type H7 (Standard Halogen Socket) 🚗 Vehicle Fitment Guidance: These bulbs are compatible with any H7-equipped vehicle, including: Ford, VW, BMW, Vauxhall, Audi, Mercedes, and more Suitable for headlights or fog lights (space-dependent) May require model-specific clips or holders 📌 Special trims (e.g. ST, GTI) may use different bulbs – always confirm your vehicle’s bulb type before purchase. 🧠 Did You Know? Standard halogen H7s typically produce ~1,200 lumens. CEUK’s V3 delivers up to 10x more light The included film kit means three beam colours in one product 3000K yellow is ideal for fog, rain, or snow 8000K blue is perfect for show use or premium aesthetics This item is also known as: Standard Trade Ref Base Type Watt H7 477 PX26d 50w

Read more less

IllumiNite White Halogen Fog & Cornering Bulb – 35W | 6500K Ice White Upgrade your visibility and style with CEUK’s IllumiNite White Halogen Bulb, part of our premium lighting range. Designed as a direct halogen replacement, this bulb delivers a crisp 6500K Ice White beam that enhances both form and function without needing any LED conversion. Ideal for use in fog light and cornering light applications, the IllumiNite range is your go-to choice for a factory-fit appearance with a significantly brighter, whiter output. Will also work fine as a dipped or main beam! 💡 Key Features: ✅ Direct Halogen Replacement – plug-and-play fitment ✅ 35W Output – legal and compatible with most factory housings ✅ 6500K Colour Temperature – pure Ice White finish ✅ Ideal for Fog & Cornering Lights ✅ OEM Fitment with Enhanced Brightness ✅ Long-Life Design with Stable Output 🔧 No wiring mods, resistors or adapters required – just remove the old bulb and install. ⚠️ Vehicle Fitment Notice: Compatible with most vehicles using H11 halogen fog or cornering bulbs Some trims (e.g., Ford ST, VW GTI) may use alternate light units – please verify bulb type before ordering For confirmation, check your vehicle manual or contact us at support@ceuk.org 🛡️ Warranty: 12-Month Warranty included as standard If a longer warranty is noted on the packaging, keep it safe as proof of eligibility This item is also known as: Standard Trade Ref Base Type Watt H11 711 PGJ19-2 55w

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

💡 Enhanced Edition H7 LED V2 Headlight Upgrade Say goodbye to dim, underperforming headlights and welcome next-level illumination with our H7 LED V2 Upgrade from the #Enhanced Edition range. Crafted for those who demand brilliant light output without compromising OEM fitment, these bulbs pack power, precision, and reliability into one sleek solution. 🚀 Vision, Without Restriction Engineered for maximum brightness and clarity: ✅ Plug-and-play design with OEM-level fitment 💥 20,000 Lumens Total (10,000 per bulb) 🔧 Works with both projector and reflector headlamp units 🌙 Reduces eye strain and improves visibility at night ❄️ 6000K Ice White colour for that clean, modern look ⚠️ Note: Due to the integrated driver and heat sink, check housing space before purchase. Some vehicles may require additional LED clips – sold separately. 📦 What’s in the Box? 2x H7 Enhanced Edition LED Bulbs (6000K Ice White) 💬 LED Clip Not Included(If your vehicle requires a clip, feel free to contact us to confirm before ordering.) ⚙️ Technical Specifications Voltage: 12V Wattage: 50W per bulb Lumens: 20,000 total (10,000 per bulb) Compatibility: Suitable for most vehicles using H7 fitment (please confirm before ordering) 📌 Vehicle Fitment Notes Some vehicles — particularly higher-spec models like Ford ST, VW GTi, etc. — may use different housings or mounting styles.We recommend double-checking your existing bulbs or contacting us to verify compatibility. ⚠️ Dashboard Error Warning: Some cars may display a harmless warning message when LEDs are installed. Please refer to our FAQ section for info and remedies. 🛡️ Warranty Info Backed by a 12-month guarantee as standard.If your packaging states a longer warranty, please retain it for proof of eligibility. This item is also known as: Standard Trade Ref Base Type H7 477 PX26d

Read more less

3-Piece Trim Removal Tool Kit – Ideal for Fog Guards & Indicators Tackle those tricky trim jobs with confidence using our 3-Piece Trim Removal Tool Kit – a must-have for any enthusiast or DIY installer. These tools are especially handy for removing mirror caps, fog surrounds, and installing sequential indicators or fog light guards. Made from durable plastic, they're designed to protect your paintwork and trim from damage during removal. 🧰 Key Features: ✅ Set of 3 identical trim tools ✅ One narrow end per tool – perfect for tight spaces ✅ Ideal for mirror caps, fog light surrounds & delicate plastics ✅ Prevents scratches and scuffs on bodywork ✅ Trusted by CEUK team for installs! 🔩 Use For: Fog Light Guard installations Sequential Indicator installs Mirror Cap removal General interior or exterior trim jobs 📦 What’s in the Kit? 3x Trim Removal Tools (identical design, one narrow end each) 🛡️ Warranty Tools are non-electrical and do not carry a warranty – however, they are built to last for repeated use.

Read more less

H7 HID Replacement Bulb – 5000K / 6000K Options Need a fresh, reliable replacement for your existing HID kit?Our H7 HID Replacement Bulb is compatible with most HID systems – including CEUK Enhanced and Ultimate Kits – and is perfect if your current bulb has dimmed or stopped working. 🔧 Key Features: 🔄 Direct Replacement for most aftermarket HID kits 🌈 Available in 5000K (Pure White) or 6000K (Ice White) ⚡ 12v Compatible – Plug & play 💡 Ideal for restoring brightness and clarity 📦 What’s Included: 1x H7 HID Bulb in your selected colour temperature(Price is for a single bulb – order quantity 2 for a full headlamp set) This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🧠 Good to Know: 🔴 Live wire may be red or blue depending on batch – product performance is identical 🛠️ Not vehicle-specific – check your bulb fitment before ordering 🧰 Suitable for any standard H7 HID ballast setup 🛡️ Warranty: ✔️ 12 Months Warranty as standard📦 If packaging states longer, keep it safe to retain extended cover 🚗 Vehicle Fitment: While this bulb is compatible with most HID kits, always confirm your vehicle uses H7 fitment. Special editions (e.g. Ford ST, VW GTi) may differ in configuration.

Read more less

CEUK ChromoLite Indicator Bulb Upgrade – Stealth Style, Orange Flash Say goodbye to the ugly orange tint of factory indicator bulbs! The CEUK ChromoLite Indicator Upgrade gives you a clean, modern look with mirror-finished bulbs that still flash bright amber when in use. 🔧 Key Features: 🪞 Stealth Chrome Finish – Disappears in the housing when off 🟠 Bright Amber Flash – No compromise on visibility or safety 💡 Offset Pin Fitment – Direct replacement for most OEM indicator bulbs 🚘 Improves Aesthetics – Removes unsightly orange glow from clear lenses ⚙️ Plug & Play – No wiring or resistors required in most cases 📦 What’s Included: 2x ChromoLite Offset Pin Indicator Bulbs 📌 Fitment Notes: These bulbs are offset pin fitment.Please ensure compatibility with your vehicle before purchasing. May fit many models across Ford, VW, Audi, BMW, and more. Some vehicles may vary by spec level (e.g., ST, GTi) – check your current bulb type or consult your handbook. This item is also known as: Standard Trade Ref Base Type 382 P21w / 1156 BA15s ⚠️ Dashboard Warning Notice: Installation of LEDs or reflective bulbs may trigger a dashboard error on some vehicles. This is harmless and simply due to the reduced power draw. Visit our FAQs for solutions. 🛡️ Warranty: Backed by CEUK’s 12-month guarantee. If your packaging states a longer coverage, please retain it for warranty validation.

Read more less

Chaser Edition Bluetooth Footwell Strip Kit – Universal Fit Bring your car's interior to life with the Chaser Edition LED Footwell Kit from CEUK — now available as a universal fit for any vehicle! Whether you're building ambience or making a statement, this kit gives your cabin an instant upgrade. 💡 Features: 🌈 600+ Static Colours 🎭 200+ Fluid/Dynamic Modes – Colour-changing, fading, dancing and more! 📲 Bluetooth App Controlled – Fully configurable from your smartphone 🔌 Ignition Powered – Lights turn on with your engine 🧠 Remembers Last Setting – Set it and forget it! 🔧 Installation Made Easy: Simply tell us your fuse type (Mini, Micro, Standard Blade etc.) in the order notes — we’ll do the rest!The kit plugs into your passenger footwell fuse box for power. Installation takes minutes. 📦 What’s in the Box? 1x Flexible Footwell LED Strip 1x Wiring Loom 1x Bluetooth Control Module 1x Instruction Sheet 🚫 Glove box strip not included. Catalogue images may show multiple model variants for reference only. 🚘 Vehicle Compatibility: ✅ Universal fitment – works on any 12v vehicle✅ Compatible with any car that has footwell fuse access❗ Just provide your fuse type when ordering to ensure the correct fit 🛡️ Warranty: Includes a 12-month guarantee as standard. If your packaging mentions a longer period, please keep it to validate extended coverage.

Read more less

Slime Smart Spair – Flat Tyre Emergency Repair Kit (300psi Compressor) Fix a flat – fast, safe, and without removing the wheel. The Slime Smart Spair Kit is your all-in-one emergency tyre repair solution, designed to get you back on the road in 15 minutes or less. No jack, no wheel removal, no hassle. ✅ Key Features: 🔧 Quick Emergency Fix – Seals and inflates tyres in under 15 minutes 🚗 No Wheel Removal Needed – Just connect, inject, inflate, and go 🛠️ Includes Powerful 300psi 12v Compressor with power cord & adapters 💚 Safe Tyre Sealant – Seals punctures up to 6mm (1/4 inch) in diameter 🔄 Multi-Purpose Use – Inflator comes with nozzles for balls, airbeds, etc. 📦 Compact & Portable – Store under seat or in boot for peace of mind 📦 What’s Included: 1x 300psi 12v Tyre Inflator 1x 473ml Slime Tyre Sealant Bottle Power Lead & Valve Hose Inflatable Adapters (balls, mattresses, etc.) Instructions Perfect for: Cars, motorbikes, caravans, and small trailers using tubeless tyres. 🔒 Safety First: Avoid dangerous roadside delays and the risks of changing a wheel at the roadside. The Smart Spair keeps you moving quickly and safely until you can get a permanent repair.

Read more less

12v Tyre Inflator – Compact 300psi Air Compressor with Adapters Essential for travel – whether abroad or in the UK. This compact yet powerful 12v tyre inflator is perfect for keeping in your vehicle for emergency inflation, tyre maintenance, or even pumping up your bike or footballs! ✅ Key Features: 🔌 12v Operation – Plugs directly into your car’s cigarette lighter socket (fused) 💨 Up to 300psi – Ideal for car tyres, van tyres, and small inflatables 🧰 Includes Adapters – Inflate footballs, bicycle tyres, airbeds and more 📏 3-Metre Cable – Long reach for even larger vehicles like SUVs or vans 🧳 Compact Design – Easy to store in your glovebox, boot, or under a seat 📦 What’s in the Box: 1x 12v Tyre Inflator (Max Pressure: 300psi) 1x Adapter Kit for footballs, bicycles, etc. 3m Power Cable with 12v Fused Plug

Read more less

Multi Utility Tool Kit – 33 Piece Compact Set Be ready for any minor job on the go with this 33pc Multi Utility Tool Kit – the perfect glovebox companion for roadside fixes, DIY tasks, and emergency situations. ✅ Key Features: 🔧 1/4" Flat Ratchet – Smooth and durable ratcheting mechanism for easy use 🪛 18 Precision Bits – Includes popular Phillips, Flathead, Torx & Hex heads 🔩 7 Sockets + Adapter – Versatile fitment for various nuts and bolts 🧲 Socket & Bit Connectors – Easily swap between functions 🪙 Micro Screwdriver Set – Stored neatly in a mini case for fiddly fixes 🧳 All Housed In: A tough, compact storage case that fits perfectly in your glovebox, drawer, or toolbox. 📦 What’s Included: 1x Flat Ratchet (1/4") 1x Socket Adapter 7x Sockets 18x Precision Bits 5x Micro Screwdrivers 1x Durable Storage Case

Read more less

👕 CEUK Official Enhanced Performance Hoodie – Navy Edition Part of the official merchandise lineup from CEUK, this latest hoodie combines premium comfort with unmistakable style. Made from soft-touch fabric, it features the iconic Enhanced Performance (EP) logo across the full chest and an oversized rear design — making it the perfect fit whether you're at a car meet, on the track, or repping your build day to day. ✨ Product Features: 🔹 Soft-style navy hoodie 🔥 EP logo printed full-front & oversized on the back 🧵 Premium feel and long-lasting wear 🏁 Designed for CEUK fans, club members & performance lovers 🎽 Unisex fit – ideal for all enthusiasts 💬 Support the brand. Represent the movement.Wear it. Live it. Be #Enhanced.

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

AIRTEC Motorsport 3.5″ downpipe for Focus MK2 ST/RS. The AIRTEC Motorsport 3.5″ downpipe reduces down to a 3″ flange to fit the stock cat / aftermarket de-cat or sports cat. Can be easily cut and modified to fit a larger flange. Made to a high quality standard and all tubing is finished in brushed stainless steel. Designed and finished in the UK *This is a universal fitting product proven to give significant power gains as well as increased pops and bangs due to an improved flow of exhaust gases.* We recommend this to be used with Stage 2 (ECU Software) but can be used with a standard car. Supplied with all relevant gaskets and fixings. Comes with downpipe locking bolts. Manufactured from T304 grade stainless steel tube. Formed using the finest mandrel bending machines.

Read more less

Here we have a brand new product for the MK3.5 Focus including the ST/RS models. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Much thicker than other panels on the market and currently available in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. Carbon fibre, gloss black and textured panels are supplied ready to fit to the car. Fitment is straight forward and takes 15 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! The variances in the air conditioning piping has meant that we are offering this product with the option of a hole for the air conditioning pipe. Some of these pipes stick up further than others. If you opt not have the hole, this can result in a small gap (3-4mm) between the front of the headlight and the panel. We appreciate that some people will be happy with a small gap rather than a pipe sticking through slam panel (it looks cleaner without the hole). However, if you would prefer to have the hole we can drill this for you to order,  We can offer these painted or hydrodipped, please contact us for more details - support@ceuk.org

Read more less

  Here we have a brand new product for the pre-face lift MK3 Focus including the ST model. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Currently available to order in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. These panels have been designed for paint (smooth raw plastic) and are the only product on the market for this vehicle. Other finishes are ready to fit. These parts have been designed on a standard vehicle which has not suffered from any previous accident damage. Some adjustment may be needed to accommodate other after market parts inc aftermarket headlights. Fitment is straight forward and takes 25 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! Please note you will need to remove your bonnet sound pad to ensure it does not rub on the slam end panels. This is particularly relevant if you have selected the gloss black or carbon finished items. 

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A5/B5API SL, CF SUITABLE FOR: ACEA A1/B1 Chrysler MS-6395 Dacia Ford WSS-M2C913-D, Ford WSS-M2C913-C, Ford WSS-M2C913-B ILSAC GF-4 Jaguar Land Rover STJLR.03.5003 Renault RN0700 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-40 C3 is recommended for engines requiring a C3 5w40 viscosity targeting 'Pumpe Düse' PD Volkswagen Audi Group, GM and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Fiat 9.55535-T2, Fiat 9.55535-S2 Ford WSS-M2C917-A GM dexos 2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.51, MB 229.31 Porsche A40 PSA B71-2290 <2014 Renault RN0700 / RN0710 VW 502 00 / 505 01, VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 C3 is recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Chrysler MS-11106 Fiat 9.55535-S3 GM-LL-B-025, GM-LL-A-025 MB 229.51, MB 229.31 Porsche C30 VW 504 00 / 507 00, VW 506 00 / 506 01 VW 503 00 / 503 01, VW 502 00 / 505 01 VW 502 00 / 505 00 Asian manufacturers Millers Oils underwrites this product for GM dexos 2 applications

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines. APPLICATION: Millers Oils Trident Professional 5w-40 is recommended for engines requiring a 5w40 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A3/B4 ACEA A3/B3 API SN, SM, SL, CF SUITABLE FOR: BMW Longlife-01 BMW Longlife-98 Chrysler MS-12991 Fiat 9.55535-Z2, Fiat 9.55535-N2 Fiat 9.55535-M2, Fiat 9.55535-H2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.5, MB 229.3, MB 229.1 Porsche A40 PSA B71-2296 <2014, PSA B71-2295, PSA B71-2294 Renault RN0700 / RN0710 VW 502 00 / 505 00 Asian manufacturers

Read more less