Performance - Peugeot 308 MK1 (T7) 2008-2013

Introducing the CEUK #Enhanced Edition H4 LED Upgrade – Dip & Main Beam Performance Without Compromise Vision. Without Restriction.The #Enhanced H4 LED Headlight Bulb Kit offers unrivalled visibility, full control over colour temperature, and true plug-and-play convenience. Designed to fit in place of your OEM H4 bulb, this kit delivers a powerful 12,000-lumen output while remaining compatible with most headlight builds – including projector and reflector housings. 🔧 Key Features: 🔆 Ultra-High Output – 12,000 lumens (6,000 per bulb) for next-level road visibility ❄️ 6000K Ice White Default Colour – Clean and modern lighting for any build 🎨 Custom Colour Output with DIY Tint Film – Switch to: 3000K Yellow (ideal for fog or snow) 8000K White/Blue (stylish xenon-style glow) 🔌 Plug-and-Play Installation – DIY-friendly design with OEM-style fit 🌙 Reduced Eye Strain – Better beam pattern helps reduce glare and night-driving fatigue 🔄 Integrated Driver & Heat Dissipation Unit – Built into rear housing for compact installation Note: Some vehicles may require an additional clip for secure installation. Contact CEUK directly to confirm compatibility with your car. 📦 What’s in the Box? 2x H4 #Enhanced LED Bulb Units (6000K default) 2x Yellow Tint Films (3000K) 2x White/Blue Tint Films (8000K)(HID clip not included – available separately if required) ⚙️ Technical Specifications: Voltage: 12V Wattage: 50W per bulb Total Lumens: 12,000 (6,000 per bulb) Fitment: H4 Compatibility: Projector & Reflector Headlamps This item is also known as: Standard Trade Ref Base Type H4 472 P43t ⚠️ Fitment Notes: This bulb has a built-in rear heat sink/driver. If your headlight housing is particularly tight, please check fitment before purchasing. Some vehicles (e.g., performance trims like Ford ST or VW GTi) may require different clips or mounts. LED upgrades may occasionally trigger a dashboard error message – a harmless side effect of the low power draw. Visit our FAQ page for easy solutions. 🛡️ Warranty: Backed by CEUK’s 12-month warranty(Retain packaging if an extended warranty is stated) 💥 Take control of your light. Take control of your drive.⚡ CEUK #Enhanced H4 LED Kit – When performance meets personalisation.

Read more less

Enhanced Edition H7 LED Bulb V3 – 6000K Ice White + Tint Kit | 12,000Lm Output Take your headlights to the next level with CEUK's #Enhanced Edition H7 LED V3 Upgrade. Delivering powerful illumination with a sleek OEM-style fit, these bulbs are designed for drivers who demand maximum visibility, improved safety, and a customisable finish – all in one upgrade. Engineered to outperform traditional halogen and even most LED rivals, the V3 model is CEUK’s most advanced yet. 🔥 Why Choose the H7 LED V3? ✅ High Output – 12,000 Lumens (6,000 per bulb) ✅ 6000K Ice White Default Output – sharp, modern lighting 🎨 Custom Tint Kit Included: 2x 3000K Yellow Films (fog-style, ideal for poor weather) 2x 8000K Blue-White Films (cool show car aesthetic) ✅ Projector & Reflector Compatible ✅ DIY-Friendly Installation ✅ Improves Night-Time Visibility & Road Contrast ✅ Reduces Eye Strain During Driving ⚠️ Installation Notes & Fitment Considerations: Some vehicles may require LED adapter clips (Sold Seperately) – contact us if unsure. These bulbs include an integrated driver/heat sink – ensure sufficient space behind your headlight housing. If your model is tight on space, check fitment first by emailing support@ceuk.org. LED installation may trigger dash bulb-out warnings on some vehicles – this is harmless and easily resolved (see our FAQs). 📦 What’s in the Box: 2x CEUK Enhanced H7 LED Bulbs – 6000K Ice White (default) 2x 3000K Yellow Adhesive Tint Films 2x 8000K Blue-White Adhesive Tint Films Installation Tips 12-Month Warranty (Keep packaging if longer warranty is specified) ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Lumens 6,000 per bulb (12,000 total) Colour Temp 6000K standard, 3000K & 8000K via tint Fitment Type H7 (Standard Halogen Socket) 🚗 Vehicle Fitment Guidance: These bulbs are compatible with any H7-equipped vehicle, including: Ford, VW, BMW, Vauxhall, Audi, Mercedes, and more Suitable for headlights or fog lights (space-dependent) May require model-specific clips or holders 📌 Special trims (e.g. ST, GTI) may use different bulbs – always confirm your vehicle’s bulb type before purchase. 🧠 Did You Know? Standard halogen H7s typically produce ~1,200 lumens. CEUK’s V3 delivers up to 10x more light The included film kit means three beam colours in one product 3000K yellow is ideal for fog, rain, or snow 8000K blue is perfect for show use or premium aesthetics This item is also known as: Standard Trade Ref Base Type Watt H7 477 PX26d 50w

Read more less

H7 HID Replacement Bulb – 5000K / 6000K Options Need a fresh, reliable replacement for your existing HID kit?Our H7 HID Replacement Bulb is compatible with most HID systems – including CEUK Enhanced and Ultimate Kits – and is perfect if your current bulb has dimmed or stopped working. 🔧 Key Features: 🔄 Direct Replacement for most aftermarket HID kits 🌈 Available in 5000K (Pure White) or 6000K (Ice White) ⚡ 12v Compatible – Plug & play 💡 Ideal for restoring brightness and clarity 📦 What’s Included: 1x H7 HID Bulb in your selected colour temperature(Price is for a single bulb – order quantity 2 for a full headlamp set) This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🧠 Good to Know: 🔴 Live wire may be red or blue depending on batch – product performance is identical 🛠️ Not vehicle-specific – check your bulb fitment before ordering 🧰 Suitable for any standard H7 HID ballast setup 🛡️ Warranty: ✔️ 12 Months Warranty as standard📦 If packaging states longer, keep it safe to retain extended cover 🚗 Vehicle Fitment: While this bulb is compatible with most HID kits, always confirm your vehicle uses H7 fitment. Special editions (e.g. Ford ST, VW GTi) may differ in configuration.

Read more less

💡 Enhanced Edition H7 LED V2 Headlight Upgrade Say goodbye to dim, underperforming headlights and welcome next-level illumination with our H7 LED V2 Upgrade from the #Enhanced Edition range. Crafted for those who demand brilliant light output without compromising OEM fitment, these bulbs pack power, precision, and reliability into one sleek solution. 🚀 Vision, Without Restriction Engineered for maximum brightness and clarity: ✅ Plug-and-play design with OEM-level fitment 💥 20,000 Lumens Total (10,000 per bulb) 🔧 Works with both projector and reflector headlamp units 🌙 Reduces eye strain and improves visibility at night ❄️ 6000K Ice White colour for that clean, modern look ⚠️ Note: Due to the integrated driver and heat sink, check housing space before purchase. Some vehicles may require additional LED clips – sold separately. 📦 What’s in the Box? 2x H7 Enhanced Edition LED Bulbs (6000K Ice White) 💬 LED Clip Not Included(If your vehicle requires a clip, feel free to contact us to confirm before ordering.) ⚙️ Technical Specifications Voltage: 12V Wattage: 50W per bulb Lumens: 20,000 total (10,000 per bulb) Compatibility: Suitable for most vehicles using H7 fitment (please confirm before ordering) 📌 Vehicle Fitment Notes Some vehicles — particularly higher-spec models like Ford ST, VW GTi, etc. — may use different housings or mounting styles.We recommend double-checking your existing bulbs or contacting us to verify compatibility. ⚠️ Dashboard Error Warning: Some cars may display a harmless warning message when LEDs are installed. Please refer to our FAQ section for info and remedies. 🛡️ Warranty Info Backed by a 12-month guarantee as standard.If your packaging states a longer warranty, please retain it for proof of eligibility. This item is also known as: Standard Trade Ref Base Type H7 477 PX26d

Read more less

CEUK Enhanced Edition H7 HID Kit – MK4 Focus Exclusive Take your night-time visibility to the next level with the Enhanced Edition H7 HID Kit, developed specifically for the MK4 Ford Focus (2019+) without factory LED dipped beams. Engineered in-house by CEUK, this kit delivers powerful light output, improved road clarity, and low power consumption, all in one easy-to-fit package. ⚙️ What Makes It #Enhanced? ✅ 35W HID System – Efficient yet powerful 🌈 Colour Temp Options Available – Choose your preferred Kelvin range 🧩 Includes CEUK In-House Designed H7 HID Clip – Required for proper fitment (and included at no extra cost!) 🛠️ Vehicle-Specific Fit – Tailored for MK4 Focus headlights without LED factory lighting This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🔍 Light Colour Tips: 4500K – 6000K: Ideal for maximum visibility (pure white to ice white) Higher Kelvin = More Blue: While they may look cool, vision is reduced as colour temperature increases For best performance, stay within the 4500K–6000K range 📦 What’s in the Kit? 2x H7 HID Bulbs (Your choice of colour temp) 2x 35W HID Ballasts 2x CEUK Designed H7 HID Retaining Clips Full wiring and install support ⚠️ Fitment Notice: Designed for MK4 Ford Focus models without factory LED dipped beam Currently, you must cut a small hole in the headlight dust cover to run the cables, or remove the cover entirely(A custom CEUK cover is in development) 🛡️ Warranty: Covered by a 12-month CEUK standard warranty(If a longer warranty is stated on packaging, please retain packaging as proof) ⚖️ Protected Design: This kit includes CEUK components protected under British Copyright LawIntellectual Property Ownership Reference: 6086653 🌙 Brighter nights, bolder looks, and better performance – have you been #Enhanced?🔧 The best HID kit for MK4 Focus drivers who expect more.

Read more less

Ultra Bright T20 LED Reverse Light Bulb – 33SMD Power & Error-Free Performance Increase your rear visibility with the CEUK T20 LED Reverse Light, designed for maximum brightness and OEM+ reliability. Built with 33 surface-mounted LEDs (SMDs), this unit delivers superior light output while maintaining full CANBUS compatibility on most vehicles. Perfect for reversing at night or in low-light environments, especially on Ford Ranger T6 Facelift models. 🔧 Key Features: 🔆 33 High-Output SMD LEDs – Delivers an intense, wide-spread white beam for improved safety ⚠️ Error-Free Performance – Designed to work with most CANBUS systems without triggering warnings 🔌 T20 Base (7440 Fitment) – Direct replacement for factory halogen bulbs 🛻 Ideal for Ford Ranger T6 Facelift – Tested for compatibility and performance 🧩 Plug & Play – No coding, no fuss ✅ Sold Individually – Add 2 to your basket for a full set 📦 Specs: Fitment: T20 / 7440 LED Type: 33SMD Voltage: 12V Compatibility: Most vehicles with T20 reverse light sockets Sold As: Single unit (1 bulb) 🛡️ Warranty: Backed by CEUK’s 12-month standard warranty(Retain packaging if a longer warranty is stated) 🚗 Vehicle Fitment Note: Some vehicles, especially special editions (e.g., Ford ST or VW GTi), may use different light units or bulb types. Please confirm the correct fitment for your vehicle before purchasing. Dashboard Error Messages? LED upgrades can sometimes trigger harmless warnings – check our FAQs for solutions. ⚡ Brighter reverse lighting starts here. Upgrade with CEUK’s T20 33SMD LED for powerful, clear output when you need it most.

Read more less

Give your lighting a clean, modern upgrade with the H3 Ice White Bulb Upgrade by IllumiNite. Designed to complement upgraded headlights or sidelights, these 6500K crisp white bulbs offer a stunning pure white output that helps modernise the look of your vehicle without the need for expensive conversions. Whether you're upgrading fog lights or other H3 applications, these bulbs are a direct-fit, plug-and-play replacement for your OEM halogens — no wiring or coding required. 💡 Key Features: 6500K crisp white light output 55W power for strong, consistent illumination Direct plug-and-play fitment Ideal for vehicles already upgraded to white LEDs or xenon headlights Sold as a pair This item is also known as: Standard Trade Ref Base Type H3 453 PK22s 🔧 Vehicle Fitment: Fits vehicles using H3 bulb fitment. Please check your existing bulb type or vehicle handbook to confirm compatibility. Some models (e.g., performance or special edition trims) may use different bulb types. 🛡️ Warranty: Includes a 12-month standard warranty. If extended warranty is stated on product packaging, it is essential to retain the packaging for future claims.

Read more less

Full Product Description IllumiNite 9005 / HB3 Ice White Upgrade – See the Road in a New Light Upgrade your visibility and style with the IllumiNite 9005 / HB3 Halogen Bulb Upgrade, delivering a 6000K pure white light that not only looks modern but also offers improved road clarity. These bulbs are a plug-and-play direct replacement for standard 9005 / HB3 bulbs and can also be used in place of 9006 / HB4 bulbs where compatible. Whether you're upgrading your dipped beam, main beam, or fog lights, these are a simple, effective enhancement. 🔧 Key Features: Crisp 6000K Ice White light output Plug & Play – No rewiring needed OEM-fit design for direct halogen replacement Enhanced visibility and clean white aesthetics Multi-purpose use: dipped beam, main beam, or fog lights Ideal for reflector and projector housings Sold as a pair This item is also known as: Standard Trade Ref Base Type HB3 9005 P20d 🛡️ Warranty: Covered by a 12-month warranty as standard. If your packaging states a longer warranty, please keep the packaging as proof. 🚗 Vehicle Fitment Notice: Fitment may vary by vehicle trim or edition. Please confirm bulb type before ordering, especially for vehicles like Ford ST or VW GTi models that may have non-standard lighting units. Make the switch. Upgrade your drive. Get #Enhanced with IllumiNite.

Read more less

IllumiNite White Halogen Fog & Cornering Bulb – 35W | 6500K Ice White Upgrade your visibility and style with CEUK’s IllumiNite White Halogen Bulb, part of our premium lighting range. Designed as a direct halogen replacement, this bulb delivers a crisp 6500K Ice White beam that enhances both form and function without needing any LED conversion. Ideal for use in fog light and cornering light applications, the IllumiNite range is your go-to choice for a factory-fit appearance with a significantly brighter, whiter output. Will also work fine as a dipped or main beam! 💡 Key Features: ✅ Direct Halogen Replacement – plug-and-play fitment ✅ 35W Output – legal and compatible with most factory housings ✅ 6500K Colour Temperature – pure Ice White finish ✅ Ideal for Fog & Cornering Lights ✅ OEM Fitment with Enhanced Brightness ✅ Long-Life Design with Stable Output 🔧 No wiring mods, resistors or adapters required – just remove the old bulb and install. ⚠️ Vehicle Fitment Notice: Compatible with most vehicles using H11 halogen fog or cornering bulbs Some trims (e.g., Ford ST, VW GTI) may use alternate light units – please verify bulb type before ordering For confirmation, check your vehicle manual or contact us at support@ceuk.org 🛡️ Warranty: 12-Month Warranty included as standard If a longer warranty is noted on the packaging, keep it safe as proof of eligibility This item is also known as: Standard Trade Ref Base Type Watt H11 711 PGJ19-2 55w

Read more less

Enhanced Edition D3S LED Replacement Bulb Upgrade – 6000K Ice White Upgrade your lighting with the Enhanced Edition D3S LED bulbs – a direct plug-and-play replacement offering up to 5x more brightness than standard OEM units. Designed to enhance night-time visibility while maintaining safe, non-glare output for oncoming traffic, these bulbs are the perfect upgrade for any vehicle using D3S fitment. Engineered to work seamlessly with self-levelling projector headlights, these high-performance bulbs deliver a crisp 6000K white light and improved road coverage without compromising your factory housing or lens. Whether you're upgrading for safety, performance, or aesthetics, IllumiNite delivers consistent, high-quality light output — every time. High Brightness Guaranteed Instant Start / Warm Up Stable Current Decoding & Error Free Thicker copper materials for excellent thermal conductivity Plug & Play using original plug Lower temperature for longer reflector lifespan! 🔧 Technical Specifications: Fitment: D3S Voltage: 12V Power: 45W / 4500lm Colour Temperature: 6000K Ice White Technology: LED (7545 CHIP) Compatibility: Suitable for Projector Headlights (won’t damage lenses) 📦 What’s in the Box? 2x IllumiNite D3S LED Bulbs 🛡️ Warranty & Returns 12-Month Warranty as standard 🚗 Vehicle Fitment Notice: Some vehicle trims or special editions (e.g., Ford ST, VW GTI) may use different light units than the standard model. Please check your existing bulb type before ordering to ensure correct fitment. This item is also known as: Standard Trade Ref Base Type Watt D3S 66340 / 42403 PK32d-5 35w

Read more less

Chaser Edition Bluetooth Footwell Strip Kit – Universal Fit Bring your car's interior to life with the Chaser Edition LED Footwell Kit from CEUK — now available as a universal fit for any vehicle! Whether you're building ambience or making a statement, this kit gives your cabin an instant upgrade. 💡 Features: 🌈 600+ Static Colours 🎭 200+ Fluid/Dynamic Modes – Colour-changing, fading, dancing and more! 📲 Bluetooth App Controlled – Fully configurable from your smartphone 🔌 Ignition Powered – Lights turn on with your engine 🧠 Remembers Last Setting – Set it and forget it! 🔧 Installation Made Easy: Simply tell us your fuse type (Mini, Micro, Standard Blade etc.) in the order notes — we’ll do the rest!The kit plugs into your passenger footwell fuse box for power. Installation takes minutes. 📦 What’s in the Box? 1x Flexible Footwell LED Strip 1x Wiring Loom 1x Bluetooth Control Module 1x Instruction Sheet 🚫 Glove box strip not included. Catalogue images may show multiple model variants for reference only. 🚘 Vehicle Compatibility: ✅ Universal fitment – works on any 12v vehicle✅ Compatible with any car that has footwell fuse access❗ Just provide your fuse type when ordering to ensure the correct fit 🛡️ Warranty: Includes a 12-month guarantee as standard. If your packaging mentions a longer period, please keep it to validate extended coverage.

Read more less

  CEUK #Enhanced Edition HIR2 (9012) LED Dip Beam UpgradeVision, Without Restriction. Performance Without Compromise. Experience next-level night-time clarity with CEUK’s #Enhanced Edition HIR2 / 9012 LED Upgrade – engineered for drivers who want OEM-style fitment with unmatched brightness and customisable output. With cutting-edge LED tech, these bulbs provide a powerful 6000K ice white beam, while drawing less power and emitting less heat than older systems. And thanks to our exclusive DIY tint film system, you can change the light colour to 3000K (yellow) or 8000K (white/blue) based on driving conditions or personal style. 🔧 Key Features: 🔆 12,000 Lumens (6000 per bulb) – Massive brightness, crystal-clear vision 🎨 3-in-1 Colour Output – Default 6000K + 2 film overlays (3000K & 8000K included) ⚙️ Direct OEM Fitment – Plug-and-play installation in most HIR2-equipped vehicles 💡 No Glare, Just Clarity – Designed for both projector and reflector headlamp units 🔋 Low Power Draw – 12V / 50W for efficiency and component safety ❄️ Reduced Eye Strain – Cooler, more natural light for night driving 📦 What’s in the Box? 2x HIR2 (9012) LED Bulbs (6000K Ice White) 2x 3000K Yellow Tint Films 2x 8000K Blue Tint Films(DIY application – change light temp in minutes) ⚠️ Fitment Notes: These bulbs have a built-in heat sink and driver unit. Some headlamp housings may have limited space. If unsure, contact us first. May trigger a dashboard warning on some vehicles due to low power draw – harmless and covered in our FAQ. ✅ Compatible With: Vehicles requiring HIR2 / 9012 dip beam bulbs Suitable for both reflector and projector headlamps Great for popular platforms including Ford, Vauxhall, and GM (check your specific model) 🛡️ Warranty: Includes 12-month CEUK warranty as standard(Keep packaging for any extended warranty claims if listed on the box) 🚗 Brighten your drive and customise your beam – all in one powerful package.🔧 The #Enhanced Edition HIR2 LED is more than a bulb. It's a full lighting experience.

Read more less

IllumiNite HB4 / 9006 Ice White Halogen Upgrade – Modern Light, OEM Fit Step up your vehicle lighting with the IllumiNite HB4 / 9006 Halogen Upgrade, engineered to deliver a crisp 6000K ice white light that offers superior visibility and a premium look—without the need for complicated wiring or aftermarket conversions. A direct plug-and-play replacement for any standard 9006 / HB4 bulb, these upgrades are ideal for dipped beam, main beam, or fog light applications. With improved clarity and road coverage, your nighttime driving experience will never be the same. 🔧 Key Features: 6000K Ice White output – sleek and modern Plug & Play installation – no modification required Direct OEM 9006 / HB4 bulb replacement Improved visibility with minimal power draw Compatible with reflector or projector housings Ideal for dipped, main, or fog light use Sold as a pair This item is also known as: Standard Trade Ref Base Type HB4 9006 P22d 🛡️ Warranty: Comes with a 12-month warranty as standard. If your product packaging states a longer warranty, please retain it as proof of extended coverage. 🚗 Fitment Notice: Some trims or special edition vehicles (e.g. Ford ST, VW GTi) may have non-standard bulb types. Please double-check your fitment before ordering to ensure compatibility. Upgrade to IllumiNite and see the road ahead in brilliant white clarity. Get #Enhanced.

Read more less

CEUK ChromoLite Indicator Bulb Upgrade – Stealth Style, Orange Flash Say goodbye to the ugly orange tint of factory indicator bulbs! The CEUK ChromoLite Indicator Upgrade gives you a clean, modern look with mirror-finished bulbs that still flash bright amber when in use. 🔧 Key Features: 🪞 Stealth Chrome Finish – Disappears in the housing when off 🟠 Bright Amber Flash – No compromise on visibility or safety 💡 Offset Pin Fitment – Direct replacement for most OEM indicator bulbs 🚘 Improves Aesthetics – Removes unsightly orange glow from clear lenses ⚙️ Plug & Play – No wiring or resistors required in most cases 📦 What’s Included: 2x ChromoLite Offset Pin Indicator Bulbs 📌 Fitment Notes: These bulbs are offset pin fitment.Please ensure compatibility with your vehicle before purchasing. May fit many models across Ford, VW, Audi, BMW, and more. Some vehicles may vary by spec level (e.g., ST, GTi) – check your current bulb type or consult your handbook. This item is also known as: Standard Trade Ref Base Type 382 P21w / 1156 BA15s ⚠️ Dashboard Warning Notice: Installation of LEDs or reflective bulbs may trigger a dashboard error on some vehicles. This is harmless and simply due to the reduced power draw. Visit our FAQs for solutions. 🛡️ Warranty: Backed by CEUK’s 12-month guarantee. If your packaging states a longer coverage, please retain it for warranty validation.

Read more less

Introducing the CEUK #Enhanced Edition H4 LED Upgrade for the Volkswagen Up! – Dip & Main Beam Performance Without Compromise This will fit any Up! Model with a H4 | 472 | P43t Fitment bulb. Vision. Without Restriction.The #Enhanced H4 LED Headlight Bulb Kit offers unrivalled visibility, full control over colour temperature, and true plug-and-play convenience. Designed to fit in place of your OEM H4 bulb, this kit delivers a powerful 12,000-lumen output while remaining compatible with most headlight builds – including projector and reflector housings. 🔧 Key Features: 🔆 Ultra-High Output – 12,000 lumens (6,000 per bulb) for next-level road visibility ❄️ 6000K Ice White Default Colour – Clean and modern lighting for any build 🎨 Custom Colour Output with DIY Tint Film – Switch to: 3000K Yellow (ideal for fog or snow) 8000K White/Blue (stylish xenon-style glow) 🔌 Plug-and-Play Installation – DIY-friendly design with OEM-style fit 🌙 Reduced Eye Strain – Better beam pattern helps reduce glare and night-driving fatigue 🔄 Integrated Driver & Heat Dissipation Unit – Built into rear housing for compact installation Note: Some vehicles may require an additional clip for secure installation. Contact CEUK directly to confirm compatibility with your car. 📦 What’s in the Box? 2x H4 #Enhanced LED Bulb Units (6000K default) 2x Yellow Tint Films (3000K) 2x White/Blue Tint Films (8000K)(HID clip not included – available separately if required) ⚙️ Technical Specifications: Voltage: 12V Wattage: 50W per bulb Total Lumens: 12,000 (6,000 per bulb) Fitment: H4 | 472 | P43t Compatibility: Projector & Reflector Headlamps ⚠️ Fitment Notes: This bulb has a built-in rear heat sink/driver. If your headlight housing is particularly tight, please check fitment before purchasing. Some vehicles (e.g., performance trims like Ford ST or VW GTi) may require different clips or mounts. LED upgrades may occasionally trigger a dashboard error message – a harmless side effect of the low power draw. Visit our FAQ page for easy solutions. 🛡️ Warranty: Backed by CEUK’s 12-month warranty(Retain packaging if an extended warranty is stated) 💥 Take control of your light. Take control of your drive.⚡ CEUK #Enhanced H4 LED Kit – When performance meets personalisation.

Read more less

✅ Revised Google-Friendly Description (Emoji-Free): IllumiNite D2S Bi-Xenon HID Bulb Upgrade – 6000K White Upgrade your visibility with IllumiNite D2S Bi-Xenon replacement bulbs — a direct plug-and-play solution for better night driving, combining improved performance with a crisp, modern look. Key Features: Delivers enhanced brightness over standard OEM bulbs Direct replacement – no modifications required 6000K crisp white output for a clean, contemporary appearance Suitable for projector headlight systems CANBUS-compatible – works with self-leveling headlight systems Improved visibility for safer night-time driving What’s in the Box: 2x D2S IllumiNite Bi-Xenon HID Bulbs (6000K) Technical Specifications: Voltage: 12V Power: 35W Colour Temperature: 6000K (Ice White) Fitment: D2S Type: Xenon / HID This item is also known as: Standard Trade Ref Base Type D2S 85122 / 66040 P32d-2 Warranty: 12-month guarantee included

Read more less