Shop By Product
Performance - VW Golf MK5 (2003-2008)
ECS Tuning ECS TUNING - Silicone Upper & Lower PCV Hose Set (Replaces 06F103221H & 06F103235A)
A last time, end-all repair of the inadequate OEM PCV hose design. By replacing the flimsy, heat hardened, OEM plastic hoses with 3-ply fiberglass reinforced silicone hoses, pre-molded to OEM specifications you can be certain to cure the inevitable return of many oil leaks and driveability problems that would have been. Our ECS Tuning Silicone Upper & Lower PCV Hose Set includes the upper (manifold) PCV hose and lower (PCV to engine block) hose in gloss black silicone material and stainless steel smooth band hose clamps so you don't have to try and scour the garage or local parts stores. PART DESIGN Molded to OEM specifications, these are a direct replacement to the failure-prone, heat-hardened plastic hoses that nobody likes to mess with! Easier to service than OEM clip-on hoses Made from heavy duty, 3-ply fiberglass reinforced silicone, our silicone hoses can handle greater temperatures and more flexibility than the OEM plastic hose without failure. Designed to resist oil, fuel and electrochemical degradation and tested up to continuous 250° Fahrenheit operating temperature and over 45psi, you can expect to achieve greater reliability, less turbulence and improved flow with our smooth silicone hose set. PRODUCT DEVELOPMENT Our ECS Silicone PCV Hoses were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. INSTALLATION AND SUPPORT Installation is the reverse order of removal of your OEM hoses, however, with our included worm gear clamps to be used to secure both hose end connections. Please reference your service manual on accessibility. * This part is designed for the FSI engine only. This can easily be found on the engine cover of your 2.0T VW/Audi. It will clearly be stamped FSI (not TFSI). This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen EOS All 2.0T Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Jetta V All 2.0T Volkswagen Passat B6 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£100.30
forge Motorsport Forge Motorsport - Induction Kit for R32 Mk5 Golf
This induction kit is for the Mk5 Golf R32. The filter is a PiperCross high flow Foam cone filter housed in a carbon fiber composite enclosed canister that connects directly to the an intake pickup at the front of the vehicle with an application specific inlet scoop. Everything is connected via high quality silicone couplers. The system creates a true ram air effect, and will only see airflow from outside the vehicle with absolutely no hot air from within the engine that could reduce power. We have dyno tested this kit, and have seen gains as high as 10 peak wheel horsepower improvement over the stock airbox and filter on Stage 2 tuned vehicles. Whilst Power gains may vary depending on your modifications and level of tune, this kit will offer a significant improvement over the original air box* *Please note some models have a noise resonator connected to the air intake pipe that will have to be disconnected and left unused when installing the Forge Motorsport induction kit. This will however not detract from the performance of the induction kit *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
£323.99
forge Motorsport Forge Motorsport - K03 Turbo Outlet Muffler Delete Pipe For The 1.8 and 2.0 Petrol Turbo (EA113 TFSI)
Forge Motorsport has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (EA113 TFSI) engines fitted with the K03 turbo, specifically engine codes AXX and BWA as fitted to the Audi A3, Golf GTi (Mk5), Seat Leon and Skoda Octavia. This will not fit engine code CBFA CCZA CCTA CAWB and CCZB with IHI turbo It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will enhance the sound of the turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part. Complete with flourolined hose and clamps. This product fits:K03A31.8 TFSi2.0 FSiTA52.0 TFSITTMk22.0SkodaOctavia2.0 FSiTVolkswagenGolfMK5GTIMK6GTIScirocco 2.0 up to 2016 Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
£140.76 - £166.27
forge Motorsport Forge Motorsport - VW, Audi, and SEAT Turbo Muffler Delete Pipe (EA113 Engine with K04 Turbo)
Forge Motorsport has developed this turbo outlet muffler delete pipe for the 2.0 petrol turbo (TFSI) (EA113 engine with K04 turbo). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part. Complete with flourolined hose and clamps. This product fits:K04 AudiS32.0 FSiT (8P Chassis)SeatLeonMk2 2005-2012Cupra K1VolkswagenGolfMK5ED30MK6RSciroccoR Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
£119.99 - £145.00
forge Motorsport Forge Motorsport - Turbo Hose Kit for Audi, VW, SEAT, and Skoda 2.0 FSiT
This kit comprises of three silicone hoses complete with CNC alloy couplers and the highest quality stainless clamps. These hoses will withstand greater temperatures and pressures compared with the OEM hoses and they look fantastic. The hoses replace the two intercooler hoses and also the throttle body hose. Please note this product does not fit the Audi TT 2.0 tsi 2010 onwards The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES *T&C’s apply FITS: AudiA32.0 FSiTTTMk22.0SeatLeonMk2 2005-2012Cupra 2.0 TFSiSkodaOctavia2.0 FSiTVolkswagenGolfMK5ED30GTIScirocco 2.0 up to 2016 Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. FITS MULTIPLE VEHICLES
£203.99
forge Motorsport Forge Motorsport - Lower Silicone Coolant Hoses for Audi, VW, and SEAT (RED)
A set of 5 Silicone Coolant hoses for the MK5 2 Litre Golf. These hoses are sold as an additional set to our FMKC010 hose kit and are often referred to as the lower hose kit. Our coolant hoses, unlike other manufacturers inferior hoses, are lined with Flurosilicone to ensure they can withstand the coolants used in modern engines. Please select your colour choice in the options above when ordering. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* FITS: AudiA32.0 FSiTS32.0 FSiT (8P Chassis)SeatLeonMk2 2005-2012Cupra 2.0 TFSiVolkswagenGolfMK5ED30GTI *T&C’s apply Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. FITS MULTIPLE VEHICLES
£150.02 - £171.70
