Triple R Composites (TRC)

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.   Our MK3 ZS front splitter, Specifically styled design that follows the curves and angles of the front bumper. This splitters added groves exagerrate the existing profiles of the front bumper.   This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit. The splitter is supplied with a full stainless steel fitting kit.

Read more less

Elevate the style of your Ford Focus MK2 RS with our Rear Spats! These finishing touches are carefully crafted to seamlessly blend in with the OEM+ look of your vehicle. Enhance its appearance and stand out from the crowd. Upgrade now! This product comes in gloss black as pictured with all fixings required.

Read more less

Upgrade your Ford Focus MK2 RS with our dynamic and stylish side skirt splitters! Made to last, these durable splitters not only enhance the appearance of your car but also provide practical benefits such as improved aerodynamics. Take your ride to the next level! Manufactured from fibreglass and supplied finished in a gloss black gel coat ready to fit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our MK2 RS modified splitter, Specifically styled design that follows the curves and angles of the front bumper. The modified was designed for those with the lowered RS, sitting flush against the bumper and sitting higher than the original version.   This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our MK2 RS Standard front splitter is the original design, Specifically styled design that follows the curves and angles of the front bumper. The Standard leaves a gap between the bumper and the splitter making it lower varient for the MK2 RS.  This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.   Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.Please note - We advise to use a small amount of polyurethane (such as tigerseal) adhesive to help secure the brows when fitting.

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat.This diffuser fits into place and requires the use of the two original fixings.This product may require some trimming / sanding to ensure the perfect fit and we advise for the perfect finish to have the product sprayed gloss black.Fitting guidance1 - Make sure the clips are sanded down to a thickness of around 4mm max2 - Lube up the clip area on the cars bumper, all the way around the clip section (WD40)3 - Take a blunt screw driver or such like to the clip section on the bumper and prise open the clips holes (don’t worry they shouldn’t break, the plastic clip section on the bumper will form its original shape once you have fitted the diffuser) Doing this will help the clips slot in as they are bigger than the original clips.4- Start from one end of the diffuser, you will notice once a few clips are in it will become a bit tougher, as you get to the tight/tougher area of the diffuser you’ll need a hand pushing from behind the bumper and the other pushing against the diffuser, forcing the diffuser into the bumper 5- If the clips look like are not lining up, lift the diffuser upwards whilst still pushing against the bumper.You may need to repeat step 5 for all the clips across the top section of the diffuser, the more clips you get in the easier it becomes and it should end up in place towards the last few clips.Please try to ignore the fact it looks like it doesn’t fit.. It does

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK2.5 ST V2 front splitter, Specifically styled design that Follows the front bumpers curves. The V2 front splitter is the higher level splitter option and is more suited to the lowered Focus ST's. If you are wanting to acheive the lower appearance on your ST225 then check out the V1   This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Elevate your Ford Focus MK2.5 ST225 with our Rear Spats. These finishing touches add a stylish, sleek design to your car. Make heads turn and stand out on the road with these must-have accessories! Supplied in a gloss black gel coat and with a full stainless steel fixing kit ready to fit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK2.5 ST front splitter, Specifically styled design that follows the curves of the front bumper. This splitter will add around 2" to the centre section of the bumper, giving the ST's front end a lower stance.   This front splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

The Ford Focus MK2 / MK2.5 ST225 Spoiler lip is the ultimate upgrade for any car enthusiast! Its subtle yet effective design adds an exaggerated touch of style to your ride, making it stand out from the crowd. Upgrade your car's look with this must-have accessory. Please Note: Due to the manufacturing method of this part it may require prepping and painting for the perfect finish. This part will require bonding on to the spoiler using a polyurethane adhesive (such as tigerseal).

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper Our Ford Focus MK2 ST Pre facelift front splitter, Specifically styled design that follows the curves of the front bumper. This product is manufactured utilising time proven composite technology.This front splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Upgrade your Ford Focus MK2 / MK2.5 ST225 / MK2 Zetec S with our sleek side skirt splitters. These splitters not only enhance the OEM+ appearance of your car, but also provide improved aerodynamics for a more efficient ride. Make a statement on the road with our high-quality design. Get yours now! Manufactured from fibreglass and supplied as pictured in a gloss black gel coat ready to fit. They also come with a full stainless steel fixing kit.

Read more less

Transform your rear bumper with our Ford Fiesta MK6 ST150 Rear Diffuser. Enhance the look of your car and stand out on the road with this stylish and functional upgrade. Give your vehicle the sporty edge it deserves with this easy-to-install diffuser. This is a direct replacement for your original diffuser, it clips into place and will requires using two of the original fixings. Manufactured from fibreglass and supplied in a glossy black gel coat. This product is supplied ready to be fitted, however for the perfect finish we recommend having this product sprayed.  

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit. It comes with a full stainless steel fitting kit and is a simple direct fit. To protect our designs this product has been registered with the Intellectual Property Office - Registered design number - 6044164

Read more less

Upgrade your Ford Fiesta MK6 ST150 or Zetec S with our stylish RS Style bonnet lip! Elevate your car's appearance with this sleek and modern addition. Make a statement on the road and turn heads with our premium quality bonnet lip. Enhance your driving experience and stand out from the crowd! Please note - This product requires bonding on using a polyurethane adhesive (such as tiger seal), and is manufactured in two halves so will require painting for the perfect finish and cover the join/trim lines.  

Read more less

Upgrade your Ford Fiesta MK6 ST150 with these stylish side skirt splitters. These OEM+ splitters add a touch of flair to your car while staying true to the original design. Make a statement on the road with these eye-catching additions This product is manufactured utilising time proven composite technology, supplied as pictured in a gloss black gel coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Upgrade your Ford Fiesta with our robust and stylish front splitter. Add a touch of sportiness to your car while also improving its aerodynamics. Make heads turn and enhance your driving experience with this must-have addition. Order now and feel the difference! This product is manufactured utilising time proven composite technology, supplied in a gloss black gel coat, along with a comprehensive stainless steel fixing kit and branded with our TRC gel badge, ready to fit.  

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.Please note- This product requires bonding on using a polyurethane adhesive (such as tiger seal) not provided This product is manufactured in two halves so may require painting for the perfect finish and cover the join/trim lines.

Read more less

Transform the look of your car with Ford Fiesta MK7 Headlight Brows! These stylish and sleek headlight brows will elevate the appearance of your Fiesta, giving it a more aggressive and sporty look. Make a statement on the road with these head-turning accessories! Our brows are manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'. Manufactured from fibreglass and supplied in a gloss black gel coat ready to fit. This product comes with 3M tape to fit the brows to the car.

Read more less

1-2 Week lead time Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.  It comes with a full stainless steel fitting kit and is a simple direct fit.Sold as a Pair. Fitting Tutorial Video - https://youtu.be/qJweY42iBbQ

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.  It comes with a full stainless steel fitting kit and is a simple direct fit. Fitting tutorial video -  https://youtu.be/Qq9muC41d6I

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Fiesta MK7 ZS front splitter, Specifically styled design that follows the curves of the MK7's front bumper giving the Fiestas front end a more aggresive appearance..This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.Fitting Tutorial Video - https://youtu.be/sbaOSdQL47k

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.Our Fiesta MK7.5 Zetec S front splitter, Specifically styled design that follows the curves and angles of the front bumper.   This product is manufactured utilising time proven composite technology.  This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less