30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

P3 Shop

72 products

  • P3 V3 OBD2 - Subaru WRX/STI/Forester Gauge (2008-2014) - Car Enhancements UK

    P3 P3 V3 OBD2 - Subaru WRX/STI/Forester Gauge (2008-2014)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00 - £435.00

  • P3 V3 OBD2 - BMW E9X Gauge (2008-2013) - Car Enhancements UK

    P3 P3 V3 OBD2 - BMW E9X Gauge (2008-2013)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00

  • P3 V3 OBD2 - VW Tiguan Gauge (2007-2015) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW Tiguan Gauge (2007-2015)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00 - £470.00

  • P3 V3 OBD2 - VW Mk5 Polo Gauge (2009-2018) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW Mk5 Polo Gauge (2009-2018)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00

  • P3 V3 OBD2 - VW Passat B8 Gauge (2015+) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW Passat B8 Gauge (2015+)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00 - £470.00

  • P3 V3 OBD2 - VW Passat B7 Gauge (2010-2015) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW Passat B7 Gauge (2010-2015)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00 - £470.00

  • P3 V3 OBD2 - VW B6 Passat / CC Gauge (2007-2017) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW B6 Passat / CC Gauge (2007-2017)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00

  • P3 OBD2 Multi-Gauge V2 - VW Passat B5 (1997-2006) - Car Enhancements UK

    P3 P3 OBD2 Multi-Gauge V2 - VW Passat B5 (1997-2006)

    B5 Passat (1998-2005) P3 OBD2 Multi-Gauge Plug and Play install - just plug into your obd2 port and install into dash! Reads and clears OBD2 Codes OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer Peak Recall on all functions Boost and Vacuum from OBD2 port Optional 80psi analog boost sensor Optional Auto-Dim or Manual Dimmer 2 x universal 0-5v linear analog inputs Includes digital display, custom OBD2 wire harness and control box. Optional 80psi boost sensor Allows gauge to read boost directly from intake/charge pipe Plugs directly into the OBD2 harness (no wiring required) Can be added/removed from the gauge at any time  Hose kit Approximately 60" of 5/32" O.D. flexible plastic tubing 5/32" O.D. "T" fitting 3 sections of 5/32" I.D. vacuum hose Fits both left hand drive and right hand drive vehicles  P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more. See www.p3gauges.com/install for more details.

    £385.20

  • P3 V3 OBD2 - VW Mk7 Jetta Gauge (2019+) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW Mk7 Jetta Gauge (2019+)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00

  • P3 V3 OBD2 - VW Mk7 / Mk7.5 Gauge (2014-2020) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW Mk7 / Mk7.5 Gauge (2014-2020)

    P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Engine oil temperature (GTI and Golf R) Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00 - £440.00

  • OBD2 Multi-Gauge V2 - VW MK6 Golf/JSW TDI (2008-2013) - Car Enhancements UK

    P3 OBD2 Multi-Gauge V2 - VW MK6 Golf/JSW TDI (2008-2013)

    P3 Multi-Gauge V2 (For 2008-2013 TDI models only) Plug and Play install - just plug into your obd2 port and install into dash! Reads and clears OBD2 Codes OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer Peak Recall on all functions Boost and Vacuum from OBD2 port (*tuned vehicles may require analog boost sensor) Optional Auto-Dim or Manual Dimmer 2 x universal 0-5v linear analog inputs Includes digital display, custom OBD2 wire harness and control box Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean, OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more. See www.p3gauges.com/install for more details.

    £375.60 - £440.60

  • P3 V3 OBD2 - VW Mk6 Gauge (2009-2014) - Car Enhancements UK

    P3 P3 V3 OBD2 - VW Mk6 Gauge (2009-2014)

    *TDI only available as V2 OBD2 Multi-Gauge P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) OEM Vent Option We install the display in an OEM vent to make your install even easier Optional Add-Ons P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port   You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda. There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge. Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. Need more details?  Check out the V3 install page for configuration and installation info. Still need help? Click on the live chat to the right or give us a call! - (614) 317-3035.

    £375.00 - £440.00

Login

Forgot your password?

Don't have an account yet?
Create account