Performance - Audi A4 B6 (2000-2006)

Dual Port - TS-0203-1022 Dual outlet-type BOV. Dual Port vents both to the atmosphere and back into the air intake. Ports with sequential timing allow quieter operation during everyday driving while getting all the benefits of a vent-to-atmosphere BOV under race conditions. They are easily converted to a complete atmospheric or whole bypass unit using supplied port blanking plug. Please note; that twin-turbo applications, such as the Audi S4 2.7L (B5) 97-01, will require two valves. Plumb Back - TS-0203-1222 Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts who do not want to be noticed but want the performance and reliability benefits of a quality BOV. Please note; that this will require two valves for twin-turbo applications, such as the Audi S4 2.7L (B5) 97-01. SUITABLE FORAudi A3 1.8T 20v 1996-2003 Audi A4 1.8T 20v 1997-2006 Audi A6 1.8T 20v 1997-2004 Audi S3 1.8T 20v 1999-2003 Audi TT 1.8T 20v 1998-2006 Bentley GT Continental 2003-current Fiat Coupe 16 20V 1993-2000 Fiat Punto GT 1993-1999 Fiat Uno Mk1 1985-1989 Fiat Uno Mk2 1989-1995 Ford XR6 BA Turbo 2002-2005 Ford XR6 BF Turbo 2005-2008 Ford XR6 FG Turbo 2008-2014 Ford Sierra Cosworth 2WD & 4WD 1986-1992 Lancia Delta HF 1.6L 1979-1994 Lancia Delta Integrale 2.0L 8 16V 1989-1994 Mazda MX5 SP & SE 2004-2005 Peugeot 406 Sri 1997-1999 Peugeot 605 Sri 1991-1999 Porsche 911 (964) 1990-1994 Porsche 911 Turbo (993) 1995-1998 Porsche 911 Turbo (996) 1999-2005 Porsche 944 1985-1991 Porsche Cayenne Turbo 2006-current (requires two valves) Saab 900 Turbo 1979-1993 Saab 9000 1990-1998 Saab 93 1999-current Saab 95 1997-2012 Volvo 440 1987-1997 Volvo 480 1988-1995 Volvo 740 1984-1992 VW Golf Mk4 1.8 20v 1998-2006 VW Jetta 1.8 20v 1999-2006 VW Passat 1.8 20v 1999-2005 VW Polo GTI 1.8 20v 2005-2009 VW New Beetle 1.8 20v 1998-2011

Read more less

This actuator is designed for the Audi A4 and Volkswagon Passat 1.8T engines that are longitudinally mounted. ( crankshaft of the engine runs inline or the length of the chassis) Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACVAG02 Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Splitter is a truly remarkable valve that gives a combination of blow off and recirculation valve operation, all at the same time, and has been specifically designed for the many turbo engined applications that operate metered airflow management systems. This means you get all the noise of the blow off valve whilst retaining the compatibility with the recirculation requirements of the engine management system. As a bonus we also offer the ability to convert the valve to recirculation only mode for those times when stealth running is required. This valve uses a Brass piston which utilises new sealing technology along with a variable spring preload, incorporating a ratchet type top adjuster that will allow for the positive and precise adjustment to match the valve to your engine. This is achieved by using a unique single, conical, progressive rate spring, that can allow for the retention of boost pressure over a wide adjustment range. This unique spring design also allows for unrestricted piston travel and flow volume regardless of the amount of pre-load adjustment added to the spring. Other manufacturers' valves use cylindrical springs with adjustable pre-load, which often experience restricted piston travel and a reduction in flow volume. When we say our products are Engineered For Performance, it's not a catchy sales phrase, it's the truth. and we prove it with every product we manufacture. Note: This valve requires installing the opposite way to the original Bosch Valve. This means that the side pipe is fitted into the Turbo Intake Hose, and the base pipe connects to the hose that runs to the boost side of the turbo.   In The Box:1 x FMDVSPLTR Valve1 x Valve Blanking Cap1 x Instruction Booklet1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.  The valve has a port size of 25mm fits: AudiA31.8TA41.8T (B5,B6 Models)A61.8T (B5,B6 Models)S31.8T (8L Chassis)TTMk1150/180BHP210/225BHPSeatIbizaMk2 (6K2) 1999-2002PetrolMk3 (6L) 2002-2008PetrolLeonMk1 1998-2005Cupra 1.8TCupra R 1.8TSkodaOctavia1.8TVolkswagenBeetle1.8TBora (1998-2005)GolfMK41.8TPassat1.8TPolo1.8T         To service this valve, access the valve piston by removing the 3 cap screws at the base of the valve and simply clean the piston chamber using brake cleaner or similar cleaning fluid before installing the new spring and piston. Please observe the correct spring and piston orientation when installing the serviceable parts, as seen in the attached drawing.   Adjustment guide. First turn the valve adjustment knob all the way down in the anti-clockwise direction, which will adjust the spring it to its lowest tension. Then turn the valve adjustment knob in the clockwise direction to the appropriate tension level, as set out below. Standard engine – 16 clicks. Stage 1 remap – 21 clicks. Stage 2 remap – 25 clicks. These adjustment recommendations are a general guide and you may find that your engine requires fine tuning by 1 or 2 clicks in either direction to achieve optimum performance. There will be no significant performance benefit adjusting the valve over 30 clicks as the spring will have reached its maximum operating tension.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less

Turbosmart’s triple gauge L-bracket is a perfect way to mount up to three Turbosmart 52mm gauges. Constructed from powder-coated solid steel, this bracket offers superior durability and stability for your gauges. With its easy installation and secure mounting, the Turbosmart Triple Gauge L-Bracket ensures reliable readings and can be used for various vehicles. The Turbosmart L-Bracket is the ultimate choice for keeping your gauges secure and accurate. So if you’re looking for a reliable mounting solution for three 52mm Turbosmart gauges, look no further than Turbosmart’s triple gauge L-bracket. It’s the perfect way to make sure your gauges stay securely in place. Get yours today!  

Read more less