Performance - Audi Q3 F3 2018-PRESENT

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

This is a performance enhancing air scoop for the MK8 Golf GTI EA888 EVO 4 engine. Features Can be be fitted in conjunction with the factory air intake system Perfect when installed alongside with our MST Performance Intake System More pronounced intake sound Features twin air tunnels instead of just one on the factory system What Does It Do? This performance air intake scoop delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated intake scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2021 Audi A3 (8V) 1.8 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2020-2025 VW Golf R (MK8) 2.0 TSI 2022-2025 Skoda Superb (MK3) 2.0 TSI 2020-2025 VW Tiguan R (AD/BW) 2.0 TSI

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

2.0 TSI EA888.3 & 3BTurbo Muffler DeleteFor all VW, Audi, Cupra, Skoda 2.0 TSI A smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete. What theTurbo Muffler Deletedoes. Our Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo. The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics. Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.   By replacing the standard part with our maximum diameter Turbo Muffler Delete, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path.  The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working. COMPATIBILITY The Turbo Muffler Delete is compatible with all MQB EA888.3 1.8T and 2.0T cars. An essential fit with any upgraded intake system. TURBO SOUNDS By smoothing the airflow path out of the turbocharger, eliminating the restriction and turbulence caused by the OEM part, you'll at last be able to hear your turbo working! EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. CNC constructed from single-piece billet T6-6061 aircraft grade aluminium. Hand polished then anodised in gloss midnight black to look good, and stay looking good. Maximum diameter smoothed internal bore for max airflow. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI EA888 gen.3 & gen.3B engines VWR160001  > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

The Ramair Silicone Intake Pipe (part no. RIP-007-BK) has been designed to replace the standard OEM plastic induction hose on the 1.8 & 2.0 TSI EA888 engine in the VW Golf MK7 GTI, VW Golf MK7 R, Audi S3, SEAT Leon Cupra and other MQB platform vehicles. The hose is constructed to provide a constant radius reducing restriction in the initial stage of the intake tract and is a direct replacement for the factory pipework. The hose is supplied with a pair of high quality Stainless Steel W2 hose clamps replacing the difficult to use OEM spring clamps. The hose is made from high-quality multi-ply silicone with fabric mesh reinforcement. It can be used in conjunction with the standard factory air box or any aftermarket induction kit that mounts to the standard air box position. Silicone Internal Diameter Turbo: 70mm Silicone Internal Diameter Inlet: 80mm Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2012-2021 Audi A3 (8V) 1.8 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI

Read more less