Performance - Audi RS5 B9 (F5) 2016-Present

The T9380 is the latest addition to the DV+ range of diverter valves from GFB (Go Fast Bits). It is specifically designed as a complete replacement for the newer generation of Continental brand OEM diverter valves found in late-model VW and Audi vehicles. Unlike the earlier generation diverter valves manufactured by Pierburg, the newer Continental valves cannot be disassembled and integrated into a DV+. Therefore, GFB developed the T9380 with a low-profile integrated solenoid as a complete replacement for the Continental diverter valve, enabling a hassle-free installation with no clearance issues. Like all valves in the DV+ range, the new T9380 delivers the following benefits over the OEM diverter valve: T9380 DV+ Improved boost holding Sharper throttle response Faster boost recovery after a gearshift or brief throttle lift Unrivalled longevity, backed by our Lifetime Warranty Improved Boost Holding Since electronic OEM diverter valves first appeared in the mid-2000s, there have been many revisions over the years in an attempt to address reliability issues. Whilst the latest generation of OEM diverter valves have become more reliable, there is always a performance trade-off due to their operational method and plastic construction. When GFB engineers performed boost leak testing on the OEM diverter valve in a VW Mk8 Golf R, they found the leak was significantly larger than in earlier generations. This excessive leaking is due to the emerging trend of manufacturers mounting diverter valves remotely on plastic piping rather than directly on the turbocharger. A plastic valve mechanism closing onto a plastic seat resulted in the largest OEM diverter valve leak we’ve seen yet at 28L/min at 1 Bar of boost. Even with the Viton face seal (featured on all DV+ pistons), the plastic OEM seat face was found to be so uneven that it was impossible to achieve a reliable seal. The T9380 successfully addresses this issue by incorporating an integral piston seat machined into its body. This design ensures a proper seal, even on uneven plastic OEM seats. Sharper throttle response, faster boost recovery after brief throttle lift Factory electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response. The DV+ patented “pilot actuation” system allows the piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response. Unrivalled longevity, backed by our Lifetime Warranty The combination of precision manufacturing, attention to detail, and robust materials mean the DV+ will last a lifetime. So does the warranty! FITS: Make Model Mark Variant FuelType YearFrom YearTo Audi A4 B9 Avant RS4 quattro Petrol 2017 2024 Audi A4 B9 Avant S4 quattro Petrol 2016 2019 Audi A5 F5 RS5 quattro Petrol 2017 2024 Audi A5 F5 S5 quattro Petrol 2017 2024 Audi A5 F5 S5 quattro Petrol 2016 2024 Audi A5 F5 S5 quattro Petrol 2016 2024 Audi A6 C8 Avant 3.0 55 TFSI Mild Hybrid quattro Hybrid 2018 2024 Audi A6 C8 S6 TFSI Mild Hybrid quattro Plug-In 2020 2024 Audi A6 C8 Saloon / Limousine 3.0 55 TFSI Mild Hybrid quattro Hybrid 2018 2024 Audi A7 4KA 55 TFSI Mild Hybrid quattro Petrol 2017 2024 Audi A8 4N2,4N8,4NC,4NL 50 TFSI Mild Hybrid quattro Plug-In 2018 2024 Audi Q5 SQ5 TFSI quattro Petrol 2021 2024 Audi Q7 4MB 55 TFSI quattro Plug-In 2021 2024 Audi Q8 4MN 55 TFSI e quattro Plug-In 2020 2024 Audi Q8 4MN 55 TFSI Mild Hybrid quattro Plug-In 2018 2024 Skoda Octavia MK4 2.0 TSI RS Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2021 2024 Volkswagen Golf MK8 2.0 GTI Clubsport Petrol 2020 2024 Volkswagen Golf MK8 2.0 TSI R 4motion Petrol 2020 2024

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less

Turbosmart’s triple gauge L-bracket is a perfect way to mount up to three Turbosmart 52mm gauges. Constructed from powder-coated solid steel, this bracket offers superior durability and stability for your gauges. With its easy installation and secure mounting, the Turbosmart Triple Gauge L-Bracket ensures reliable readings and can be used for various vehicles. The Turbosmart L-Bracket is the ultimate choice for keeping your gauges secure and accurate. So if you’re looking for a reliable mounting solution for three 52mm Turbosmart gauges, look no further than Turbosmart’s triple gauge L-bracket. It’s the perfect way to make sure your gauges stay securely in place. Get yours today!  

Read more less