Performance - Audi RS5 B9 (F5) 2016-Present

Enhanced Edition H8/H11 Mini LED Bulbs – Ultra Bright, Compact Fit (6000K Ice White, 6000Lm) All the power of our V3 LED bulb – in a sleek, compact design.Introducing the CEUK Enhanced Edition H8/H11 Mini LED Bulbs, engineered for maximum output and perfect fitment in tight headlight or fog light housings. These bulbs deliver a massive 6000Lm per bulb and feature a compact heat management system – ideal for modern vehicles where space is limited. Compatible with H8 and H11 fitments, these bulbs are perfect for fog lights, dipped beams, or high beam upgrades, delivering clear, crisp 6000K Ice White light with superior reliability. 💡 Key Features: 6000Lm Output Per Bulb – 6x brighter than most OEM halogens Ultra-Compact Design – mini cooling fan built into the shaft, no bulky heat sink Plug & Play Fitment – no adapters, clips, or caps needed 12V, 28W Power Efficiency Zero Polarity Issues – works in any orientation Suitable for Projector & Reflector Housings Safe for OEM Components – no CANBUS interference on most vehicles ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K Ice White Lumen Output: 6000Lm per bulb Fitment: H8 / H11 📦 What’s in the Box: 2x H8/H11 Enhanced Edition LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (retain packaging if warranty is extended) ⚠️ Fitment Note: Always double-check your vehicle's bulb type – special editions (e.g., Ford ST, VW GTI) may differ from standard specs. Some vehicles may display a dashboard error message when LEDs are installed – this is harmless and addressed in our FAQs. This item is also known as: Standard Trade Ref Base Type Watt H8 708 PGJ19-1 35w H11 711 PGJ19-2 55w

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

FITS: Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) 2019 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Audi RS5 B9 2.9 V6 Turbo Sportback (OPF/GPF Models) 2019 and Later GPF Back With Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU832 GPF Back Non-Resonated (Louder) with Burnt Titanium Oval Trims 70 2.76 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Audi RS5 B9 2.9 V6 Turbo Sportback (Non-OPF/GPF Models) 2018 and 2019 Part No. Description Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXAU808 Cat-back 70 2.76 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Genuine Carbon Fibre DSG Shifter Knob – Black Trim & Red-Stitched Black Gaiter | Direct Replacement for Audi Upgrade your interior with this Genuine Carbon Fibre DSG Gear Knob, complete with black trim, black button, and a premium black gaiter finished with red stitching. Designed for Audi models with the specific DSG trim shape shown, this shifter is a direct replacement for your OEM knob and adds a race-inspired, high-end finish to your cabin. ✅ Key Features: Real Carbon Fibre Construction – lightweight, durable, and stylish Direct Replacement DSG Knob – installs using a simple twist-clip system Black Trim & Button – sleek, factory-like finish Included Black Gaiter with Red Stitching – premium touch to elevate your interior Universal Fit for Applicable Audi Models – please confirm compatibility via images or contact us 🔧 Installation Notes: The knob clips directly in place after removing the original The gaiter attaches to your existing plastic trim• OEM gaiters are typically stapled in – you can reattach using staples, adhesive, or needle and thread No coding or electrical work required 📌 IMPORTANT: This will only fit Audi vehicles with the DSG trim shape shown in the product images. If you're unsure, please contact our team before ordering. 🛠️ What’s Included: 1x Carbon Fibre DSG Gear Knob with Black Trim 1x Black Leather Gaiter with Red Stitching

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

3D / 4D Number Plate Frame – Custom Acrylic Holder with Logo Option | CEUK Add depth, style, and a premium finish to your number plates with the CEUK 3D / 4D Acrylic Number Plate Frames – designed for both front and rear use. Each frame is a 3-piece assembly that surrounds your number plate and offers full customisation. Whether you're looking to match your build’s colour scheme or highlight a performance logo, these frames provide a unique way to stand out. ✅ What’s Included (per frame): 1x Gloss Black Backing Base Plate 1x Black Frame Surround 1x Coloured Insert with or without logo (your choice) 🛒 Price is for one frame – if you want front and rear, please order Qty: 2 🎨 Customisation Options: Insert Colour – choose from a wide range Logo Choice – select from available options or choose no logo Logo Colour – customise to suit your build The logo is cut out of the insert, and a second acrylic logo (in your chosen colour) is inlaid for a seamless, smooth finish. Some logos this may not be possible and vinyl insert will be used. ⚙️ How to Fit: Use gel or foam double-sided tape (We do supply a fitting kit) to secure your number plate into the backing plate Stick the full frame unit to your car using a strong adhesive Alternatively, use our fitting kit, which includes pre-cut adhesive pads for easy installation 🚗 Fitment Notes: Requires a flat surface for secure mounting Rear plates with recessed holes are supported using our fitting kit Not suitable for mesh or honeycomb grilles without a flat number plate surface (may fall off due to weight and lack of contact surface) Always clean and prep the surface fully before installation ❗ If a frame falls off due to improper surface preparation or adhesion failure, this is not covered under warranty. 🛠️ Fitting Kit (Optional): Includes pre-cut double-sided acrylic rectangles Designed to secure the frame to your vehicle safely and discreetly 💬 Need something custom? We offer bespoke designs! Contact us via Email or WhatsApp with your idea. Customisation may incur additional costs.

Read more less

Enhanced Edition H1 LED Headlight Bulbs – 6000K Ice White | 20,000Lm | Direct Fit Experience unmatched brightness and clarity with the CEUK Enhanced Edition H1 LED Bulbs – designed for performance, built for simplicity. This powerful LED upgrade delivers a sharp, clean 6000K ice white output with a total output of 20,000 lumens, offering a drastic improvement over standard halogen H1 bulbs. ⚠️ Important: These are not suitable for cornering light applications. 🚀 Vision, Without Restriction We've engineered a direct-fit, no-fuss H1 LED solution that doesn't require any wire splicing, adapters, or awkward metal clips. Unlike many aftermarket options, CEUK’s H1 LEDs are built to fit into standard halogen bulb slots using the existing connectors and mounting points — just like OEM. Perfect for night drives, low-light conditions, or simply modernising your lighting setup, these bulbs are ideal for those who want high performance without the hassle. 💡 Why Upgrade to CEUK H1 LEDs? ✅ Direct OEM Fit – No clips, wiring mods, or converters ✅ 6000K Ice White Output – Modern, premium look ✅ Up to 20,000 Lumens Total Output – Huge visibility gain ✅ 50W Power Draw Per Bulb – Bright, but safe for OEM harnesses ✅ Projector & Reflector Compatible – Versatile installation ✅ No Flickering or Overheating – Optimised for daily driving ✅ Reduced Eye Strain – Crisp light that mimics daylight ✅ Quick & Easy Install – Designed with DIY installers in mind ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Colour Temp 6000K (Ice White) Brightness 10,000Lm per bulb (20,000Lm total) Fitment H1 (Standard Halogen Socket) 📦 What You’ll Receive: 2x CEUK Enhanced Edition H1 LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (keep original packaging if longer warranty is stated) Support from our UK-based team if you need fitting advice 🔧 Vehicle Compatibility: This product is suitable for any vehicle using an H1 halogen headlight bulb – whether for dipped beam, high beam, or fog lights. Please Note: Always confirm bulb type before purchase. Some high-spec models (e.g. Ford ST, VW GTI) may use a different fitment than base trims. ⚠️ CANBUS Warning: Some vehicles may display a dashboard error message after installing LEDs due to reduced power draw. This is a harmless effect. See our FAQs for easy solutions like resistors or error cancellers, if required. 🧠 Did You Know? OEM halogen H1 bulbs typically produce 1,200–1,500 lumens per bulb. CEUK’s Enhanced Edition H1 LEDs provide over 6x the brightness with significantly less heat. White 6000K lighting not only looks better, but it improves contrast on road markings, kerbs, and signs — helping reduce driver fatigue during night driving. 🎯 Perfect For: Daily Drivers who want better visibility Car Enthusiasts looking to modernise the look of their headlights DIY Modders wanting a true plug & play upgrade Show Builds that need a clean, bright, premium light output This item is also known as: Standard Trade Ref Base Type Watt H1 448 P14.5s 55w  

Read more less

Enhanced Edition H8/11 LED Fog Light Bulb V3 – 6000K Ice White + Colour Tint Kit Upgrade your visibility and style with the CEUK Enhanced Edition H8/11 LED Bulb V3, the ultimate plug-and-play LED upgrade for your fog lights or dipped beam. Designed for OEM-fit compatibility, this next-generation bulb delivers an ultra-bright 6000K Ice White beam with no wiring or modification needed – and includes tint options for complete visual customisation. 🔥 Why Choose the V3 H8/11 Bulb? 💡 6,000 Lumens per bulb (12,000Lm pair) 🧊 6000K Ice White output as standard 🟡 Tint Kit Included: 2x 3000K Yellow Film Wraps 2x 8000K Cool White/Blue Film Wraps 🔧 Fits all H8 and H11 bulb sockets 🧩 No adapters, clips or wiring required 🌟 Compatible with reflector & projector housings 🧠 Designed to reduce eye strain while improving night-time visibility ⚠️ Fitment Note: Ensure at least 1 inch of space behind the bulb in your housing for safe installation. ✅ What’s in the Box: 2x CEUK Enhanced H8 / H11 LED Bulbs (6000K Ice White Default) 2x 3000K Yellow Adhesive Films (Fog Style) 2x 8000K Blue-White Adhesive Films (Colder Tint) Installation Tips 12-Month CEUK Warranty (keep packaging if a longer warranty is stated) ⚙️ Technical Specifications: Spec Detail Voltage 12V Wattage 50W per bulb Lumen Output 6,000Lm per bulb Colour Temp 6000K (default), optional 3000K or 8000K via tint film Fitment H8 / H11 🚗 Vehicle Compatibility: Fits any vehicle using H8 or H11 bulbs in: ✅ Fog Lights ✅ Low Beam / Dipped Beam (space permitting) ⚠️ Note: Check for trim-specific variations (e.g., Ford ST, VW GTI) before ordering. Some modern vehicles may display a dashboard bulb warning due to low power draw. This is harmless and may require a resistor or decoder depending on your vehicle. See our FAQs for more help. 🧠 Did You Know? OEM halogen bulbs output roughly 1,200–1,500 lumens CEUK Enhanced LED Bulbs deliver over 4x the brightness Yellow tint boosts visibility in fog, rain or snow 8000K offers a distinct premium aesthetic for show or daily use 🎯 Perfect For: Drivers seeking maximum light output Customisation lovers who want style + function Fog light or dipped beam LED upgrades Cars with tight headlight units (space-saving design) This item is also known as: Standard Trade Ref Base Type Watt H8 708 PGJ19-1 35w H11 711 PGJ19-2 55w

Read more less

Enhanced Edition H7 LED Bulb V3 – 6000K Ice White + Tint Kit | 12,000Lm Output Take your headlights to the next level with CEUK's #Enhanced Edition H7 LED V3 Upgrade. Delivering powerful illumination with a sleek OEM-style fit, these bulbs are designed for drivers who demand maximum visibility, improved safety, and a customisable finish – all in one upgrade. Engineered to outperform traditional halogen and even most LED rivals, the V3 model is CEUK’s most advanced yet. 🔥 Why Choose the H7 LED V3? ✅ High Output – 12,000 Lumens (6,000 per bulb) ✅ 6000K Ice White Default Output – sharp, modern lighting 🎨 Custom Tint Kit Included: 2x 3000K Yellow Films (fog-style, ideal for poor weather) 2x 8000K Blue-White Films (cool show car aesthetic) ✅ Projector & Reflector Compatible ✅ DIY-Friendly Installation ✅ Improves Night-Time Visibility & Road Contrast ✅ Reduces Eye Strain During Driving ⚠️ Installation Notes & Fitment Considerations: Some vehicles may require LED adapter clips (Sold Seperately) – contact us if unsure. These bulbs include an integrated driver/heat sink – ensure sufficient space behind your headlight housing. If your model is tight on space, check fitment first by emailing support@ceuk.org. LED installation may trigger dash bulb-out warnings on some vehicles – this is harmless and easily resolved (see our FAQs). 📦 What’s in the Box: 2x CEUK Enhanced H7 LED Bulbs – 6000K Ice White (default) 2x 3000K Yellow Adhesive Tint Films 2x 8000K Blue-White Adhesive Tint Films Installation Tips 12-Month Warranty (Keep packaging if longer warranty is specified) ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Lumens 6,000 per bulb (12,000 total) Colour Temp 6000K standard, 3000K & 8000K via tint Fitment Type H7 (Standard Halogen Socket) 🚗 Vehicle Fitment Guidance: These bulbs are compatible with any H7-equipped vehicle, including: Ford, VW, BMW, Vauxhall, Audi, Mercedes, and more Suitable for headlights or fog lights (space-dependent) May require model-specific clips or holders 📌 Special trims (e.g. ST, GTI) may use different bulbs – always confirm your vehicle’s bulb type before purchase. 🧠 Did You Know? Standard halogen H7s typically produce ~1,200 lumens. CEUK’s V3 delivers up to 10x more light The included film kit means three beam colours in one product 3000K yellow is ideal for fog, rain, or snow 8000K blue is perfect for show use or premium aesthetics This item is also known as: Standard Trade Ref Base Type Watt H7 477 PX26d 50w

Read more less

IllumiNite White Halogen Fog & Cornering Bulb – 35W | 6500K Ice White Upgrade your visibility and style with CEUK’s IllumiNite White Halogen Bulb, part of our premium lighting range. Designed as a direct halogen replacement, this bulb delivers a crisp 6500K Ice White beam that enhances both form and function without needing any LED conversion. Ideal for use in fog light and cornering light applications, the IllumiNite range is your go-to choice for a factory-fit appearance with a significantly brighter, whiter output. Will also work fine as a dipped or main beam! 💡 Key Features: ✅ Direct Halogen Replacement – plug-and-play fitment ✅ 35W Output – legal and compatible with most factory housings ✅ 6500K Colour Temperature – pure Ice White finish ✅ Ideal for Fog & Cornering Lights ✅ OEM Fitment with Enhanced Brightness ✅ Long-Life Design with Stable Output 🔧 No wiring mods, resistors or adapters required – just remove the old bulb and install. ⚠️ Vehicle Fitment Notice: Compatible with most vehicles using H11 halogen fog or cornering bulbs Some trims (e.g., Ford ST, VW GTI) may use alternate light units – please verify bulb type before ordering For confirmation, check your vehicle manual or contact us at support@ceuk.org 🛡️ Warranty: 12-Month Warranty included as standard If a longer warranty is noted on the packaging, keep it safe as proof of eligibility This item is also known as: Standard Trade Ref Base Type Watt H11 711 PGJ19-2 55w

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

Higher Output Ignition Coils.for all VW Group 2.0 TSI engines and bigger. RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils. What dothey do? The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Three Colour choices: 'R' BLUE VWR900000 GTI RED VWR900001 NARDO GREY VWR900002 Sold individually - remember to order sets of four, five, six or eight as required.  Confirmed applications VWR900000 – BLUE  I   VWR900001 – RED  I  VWR900002 – GREY All vehicles fitted with the following engines: 1.8 TSI : EA888.3 2.0 TSI : EA888.3 & 3B 2.0 TSI : EA888.4  2.5 TFSI : EA855 EVO 3.0 V6 TFSI : EA839 2.9 V6 TFSI : EA839 4.0 V8 TFSI : EA825 ​ Sold individually.  Most popular models with these engines include: > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 AW 2017+ > Audi S1 2.0 TFSI 2015-2018 > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D5 2017+ > Audi A8 / S8 D4 2010-2017 > Audi Q8 4M8 50 TDI & 45 TDI 2018+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi Q7 / SQ7 4M 2016-2019 > Audi R8 2015+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq 2018+ > Porsche Panamera 970 2010-2017 > Porsche Macan 2014+ > Porsche Cayenne 2019+ > Lamborghini Urus 2018-2021 > Bentley Bentayga 2016-2021

Read more less

💡 Enhanced Edition H7 LED V2 Headlight Upgrade Say goodbye to dim, underperforming headlights and welcome next-level illumination with our H7 LED V2 Upgrade from the #Enhanced Edition range. Crafted for those who demand brilliant light output without compromising OEM fitment, these bulbs pack power, precision, and reliability into one sleek solution. 🚀 Vision, Without Restriction Engineered for maximum brightness and clarity: ✅ Plug-and-play design with OEM-level fitment 💥 20,000 Lumens Total (10,000 per bulb) 🔧 Works with both projector and reflector headlamp units 🌙 Reduces eye strain and improves visibility at night ❄️ 6000K Ice White colour for that clean, modern look ⚠️ Note: Due to the integrated driver and heat sink, check housing space before purchase. Some vehicles may require additional LED clips – sold separately. 📦 What’s in the Box? 2x H7 Enhanced Edition LED Bulbs (6000K Ice White) 💬 LED Clip Not Included(If your vehicle requires a clip, feel free to contact us to confirm before ordering.) ⚙️ Technical Specifications Voltage: 12V Wattage: 50W per bulb Lumens: 20,000 total (10,000 per bulb) Compatibility: Suitable for most vehicles using H7 fitment (please confirm before ordering) 📌 Vehicle Fitment Notes Some vehicles — particularly higher-spec models like Ford ST, VW GTi, etc. — may use different housings or mounting styles.We recommend double-checking your existing bulbs or contacting us to verify compatibility. ⚠️ Dashboard Error Warning: Some cars may display a harmless warning message when LEDs are installed. Please refer to our FAQ section for info and remedies. 🛡️ Warranty Info Backed by a 12-month guarantee as standard.If your packaging states a longer warranty, please retain it for proof of eligibility. This item is also known as: Standard Trade Ref Base Type H7 477 PX26d

Read more less

ll Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the 3.0 petrol engine breathe easier and improve throttle response from your S5 Gains in power and torque are noticeable over a larger RPM range A straightforward way to give your S5 a sporty, performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses Fitment Audi S5 B9 3.0 V6 TFSI 2017+ models Audi RS5 B9 3.0 V6 TFSI 2017+ models

Read more less

3-Piece Trim Removal Tool Kit – Ideal for Fog Guards & Indicators Tackle those tricky trim jobs with confidence using our 3-Piece Trim Removal Tool Kit – a must-have for any enthusiast or DIY installer. These tools are especially handy for removing mirror caps, fog surrounds, and installing sequential indicators or fog light guards. Made from durable plastic, they're designed to protect your paintwork and trim from damage during removal. 🧰 Key Features: ✅ Set of 3 identical trim tools ✅ One narrow end per tool – perfect for tight spaces ✅ Ideal for mirror caps, fog light surrounds & delicate plastics ✅ Prevents scratches and scuffs on bodywork ✅ Trusted by CEUK team for installs! 🔩 Use For: Fog Light Guard installations Sequential Indicator installs Mirror Cap removal General interior or exterior trim jobs 📦 What’s in the Kit? 3x Trim Removal Tools (identical design, one narrow end each) 🛡️ Warranty Tools are non-electrical and do not carry a warranty – however, they are built to last for repeated use.

Read more less

H7 HID Replacement Bulb – 5000K / 6000K Options Need a fresh, reliable replacement for your existing HID kit?Our H7 HID Replacement Bulb is compatible with most HID systems – including CEUK Enhanced and Ultimate Kits – and is perfect if your current bulb has dimmed or stopped working. 🔧 Key Features: 🔄 Direct Replacement for most aftermarket HID kits 🌈 Available in 5000K (Pure White) or 6000K (Ice White) ⚡ 12v Compatible – Plug & play 💡 Ideal for restoring brightness and clarity 📦 What’s Included: 1x H7 HID Bulb in your selected colour temperature(Price is for a single bulb – order quantity 2 for a full headlamp set) This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🧠 Good to Know: 🔴 Live wire may be red or blue depending on batch – product performance is identical 🛠️ Not vehicle-specific – check your bulb fitment before ordering 🧰 Suitable for any standard H7 HID ballast setup 🛡️ Warranty: ✔️ 12 Months Warranty as standard📦 If packaging states longer, keep it safe to retain extended cover 🚗 Vehicle Fitment: While this bulb is compatible with most HID kits, always confirm your vehicle uses H7 fitment. Special editions (e.g. Ford ST, VW GTi) may differ in configuration.

Read more less

Replacement Filter for S4/S5 (B9) and RS4/RS5 (B9) RacingLine Intake kitThis replacement filter is compatible with the following intake kits: - VWR1241S4- VWR1241RS

Read more less

RacingLine Performance Oil Cap - 2.9TFSI 3.0TFSI and 4.2 V8RacingLine Performance's billet aluminium Oil cap to suit the V6 EA839 plus other engine series comes complete ready to fit; including a new seal!  WHY CHANGE YOUR OIL CAP?The RacingLine Billet Oil Cap for Audi's V6 EA839 engines is beautifully over-engineered in customary RacingLine fashion to give an exquisite feel and exceptional product experience.Never again will you worry whether you tightened your oil cap fully - as this billet aluminium cap clicks hard and locks into place CONFIRMED APPLICATIONS For 2.9 V6TT, 3.0 V6T, 4.0 V8TT TFSI engines.   VWR190003 > Audi S4 B9/9.5 2017+ > Audi RS4 B9 2017-2019 > Audi S5 B9/9.5 2017+ > Audi RS5 B9 2017-2019 > Audi SQ5 2017+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A8 / S8 D5 2017+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi R8 2015+

Read more less

Racingline Replacement 352mm Rotors - STAGE 3 - VWR680000These replacement Rotors come without bells ready to build onto the original bells of your 2013-2016 Volkswagen Racing 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline Replacement 360mm Rotors - STAGE 3 - VWR680001 These replacement Rotors come without bells ready to build onto the original bells of your 2016-2018 Racingline 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline 345mm Replacement Rotors (Complete) - STAGE 2 - VWR680002These replacement rotors are suitable for the Racingline 'Stage 2' Brake Kit for the PQ35 Platform and MQB Platform ModelsSold as a Pair of Rotors.- The discs have a new thickness of 30mm- The min thickness is 28mm- The max wear thickness is 1.4mm per side Racingline Replacement 355mm Rotors - STAGE 3 - VWR680003These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 355mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit. Racingline Replacement 380mm Rotors - STAGE 3 - VWR680004These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 380mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit.

Read more less

Side Skirts Diffusers Audi RS5 Coupe F5 Facelift FITS ONLY: Audi RS5 Coupe F5 Facelift (2020-) COMPLETE SET CONTAINS:-> Side Skirt Splitters-> Mounting Kit-> Mounting Manual  CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Street Pro Rear Side Splitters Audi RS5 F5 Facelift FITS ONLY:Audi RS5 F5 Facelift (2019-) COMPLETE SET CONTAINS: §  Maxton Racing Rear Side Splitters §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Street Pro Rear Diffuser Audi RS5 F5 Facelift FITS ONLY:Audi RS5 F5 Facelift (2019-) COMPLETE SET CONTAINS: §  Maxton Racing Rear Diffuser §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less