Performance - Cupra Formentor (2020-Present)

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the  Show Day Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK by CEUK, this lightweight and secure Stainless Steel prop is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets / doors / boots open, whether or not your vehicle has gas lift struts. Crafted from Air Grade Stainless Steel and featuring precision-machined billet aluminium components with stainless steel fixings; then finished in a coloured polyolefin coating, the Show Day Prop offers both functionality and a sleek, professional appearance. Shaft Made from Stainless Steel, the shaft is ultra-thin at just 6mm and lightweight, with no wrapping or skinning. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. Lower Fixing The lower fixing features a precision bend, with a rubber cap to prevent scratches or damage to the vehicle. Extendability: The upper fixing has a 4cm / 40mm extendable thread, which can be raised to give a longer prop. Sizing Length of Prop Section only: 500mm / 50cm Total length when fully extended: 570mm / 57cm Adjustment Capability when installed: 53cm / 57cm

Read more less

CEUK StealthMag™ Number Plate Mount Kit Clean. Secure. Tool-Free. Take your show plate setup to the next level with the CEUK StealthMag™ Number Plate Mount Kit — the ultimate no-drill, no-screw solution for a flawless finish. Designed for performance, simplicity and style, this magnetic mounting system keeps your number plate perfectly aligned and instantly removable for shows, meets and detailing. ⚙️ Key Features Ultra-Strong Magnetic Hold – Industrial-grade neodymium magnets with 3M VHB adhesive ensure your plate stays firmly in place, even at speed. Stealth Design – Achieve a seamless, floating look with no visible screws, bolts or brackets. Quick-Release Function – Remove or swap plates in seconds — ideal for show cars, photo shoots and garage use. No Drilling Required – Protects your bumper and plate from unnecessary holes or damage by using your existing plate fixture holes. Durable Construction – High-quality coated magnets resist corrosion, moisture and heat for long-lasting performance. Universal Fit – Works with all standard UK plates. 📦 What’s Included (1x Kit is for 1x Number Plate) 2 × Magnetic Mounts (with 3M VHB pads) 2 × Metal Receivers (for plate attachment) 2 × Fixing Screws (optional use) Alcohol Wipe & Fitting Guide Using a show plate? Add on the additional magnets so you can swap the plates easily! 🚗 Why Choose CEUK StealthMag™ Engineered for enthusiasts who demand the cleanest look possible — no visible screws, no frames, no fuss.Get that show-ready, ultra-sleek aesthetic that enhances your car’s lines and keeps your plates secure yet removable at any time.

Read more less

Racingline R-06 8.5J x 18inch Alloy Wheel Set - Gloss Gunmetal Grey THIS LISTING IS FOR A SET OF FOUR ALLOY WHEELSThe RacingLine VWR R-06 18" Flow-Formed Alloy Wheel is the perfect balance of timeless design, lightweight engineering, and uncompromising strength. Designed in an 8.5 x 18” size with an ET44 offset, the R-06 delivers both performance and style, whether for the challenges of daily driving or the demands of the track. Precision Flow-Formed ConstructionCrafted using advanced flow-forming technology, the barrel of the wheel is spun under intense heat and pressure to refine the aluminium’s grain structure. This process produces a wheel that is significantly stronger and lighter than traditional cast wheels, enhancing handling, acceleration, and efficiency without compromising durability. Performance-Ready DesignAt just 9.9kg (21.3lbs) per wheel, the R-06 achieves the ideal balance between weight savings and the robust strength required for long-lasting road and track use. Perfect Fitment for VWG PlatformsWith a fitment of 8.5 x 18” ET44 and 5x112 PCD, the VWR R-06 is tailored for VWG MQB, MQB EVO, and A5 platform vehicles. The 18” diameter is popular for many drivers, chosen to optimise both road and track performance by allowing a squarer tyre profile and improved clearance without the risk of rubbing.  Developed to exceed OEM standards, each wheel is rigorously tested for impact resistance, structural fatigue, load rating, and geometric accuracy. Maximum load capacity is an impressive 560kg, certified to ISO 7141 standards. Notes: 8.5J x 18" 5 x 112 PCD ET44 Offset Weight: 9.9kg / 21.3lb per wheel RacingLine Centre Caps Included Confirmed Fitment: VOLKSWAGEN > VW Golf 8 & 8.5 2020+> VW Golf 7 & 7.5 2013-2020> VW Passat B8 2015+> VW Arteon 2017+> VW T-Roc 2017+> VW Golf 5 2005-2008> VW Golf 6 2008-2014> VW Scirocco 2008-2017> VW Jetta / GLI 5 2005-2011> VW Jetta / GLI 6 2011-2018> VW Jetta / GLI 7 2018+ AUDI > Audi S3 8Y & 8Y.2 2020+> Audi A3 8Y & 8Y.2 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TFSI 8V 2015-2017> Audi TT 3 8S 2014+> Audi SQ2 2018+> Audi S3 8P 2006-2012> Audi A3 8P 2003-2012> Audi TT II 8J 2006-2014 SEAT / CUPRA > Cupra Leon 4 & 4.5 FW 2020+> SEAT Leon III 5F 2015-2020> SEAT Leon II 1P 2005-2012> Cupra Formentor 2020+> Cupra Ateca 2018+ SKODA > Skoda Octavia IV NX 2020+> Skoda Octavia III 5E 2014-2020> Skoda Octavia II 1Z 2004-2013

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed! Even better driving dynamics and more exciting looks: H&R TRAK+ wheel spacers make your car even sportier! By moving the wheel out from the hub, TRAK+ wheel spacers widen the stance of the vehicle and lower its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you’ve been looking for. Like all of H&R’s street-engineered products, H&R TRAK+ wheel spacers are certified by the German Technical Inspection Agency (TÜV). H&R also has the correct wheel bolts or nuts to install TRAK+ wheel spacers on most cars, with original or aftermarket wheels. 40mm overall Axle spacers High strength, light weight aluminum/magnesium alloy CNC machined Anodized for optimum corrosion protection Available for most domestic and imported automobiles For use with original or aftermarket wheels (Studs may need shortening if aperture in rear of alloy wheel is not sufficient for clearance) Compatible with all suspension designs TUV approved SPECIFICATIONS Track widening per axle [mm] 40 Thickness [mm] 20 Number of Holes 5.0 Bolt Hole Circle Ø [mm] 112 Centering Diameter [mm] 57.1 Colour Black Registration Type with TÜV® certificate   Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

Enhanced Edition D3S LED Replacement Bulb Upgrade – 6000K Ice White Upgrade your lighting with the Enhanced Edition D3S LED bulbs – a direct plug-and-play replacement offering up to 5x more brightness than standard OEM units. Designed to enhance night-time visibility while maintaining safe, non-glare output for oncoming traffic, these bulbs are the perfect upgrade for any vehicle using D3S fitment. Engineered to work seamlessly with self-levelling projector headlights, these high-performance bulbs deliver a crisp 6000K white light and improved road coverage without compromising your factory housing or lens. Whether you're upgrading for safety, performance, or aesthetics, IllumiNite delivers consistent, high-quality light output — every time. High Brightness Guaranteed Instant Start / Warm Up Stable Current Decoding & Error Free Thicker copper materials for excellent thermal conductivity Plug & Play using original plug Lower temperature for longer reflector lifespan! 🔧 Technical Specifications: Fitment: D3S Voltage: 12V Power: 45W / 4500lm Colour Temperature: 6000K Ice White Technology: LED (7545 CHIP) Compatibility: Suitable for Projector Headlights (won’t damage lenses) 📦 What’s in the Box? 2x IllumiNite D3S LED Bulbs 🛡️ Warranty & Returns 12-Month Warranty as standard 🚗 Vehicle Fitment Notice: Some vehicle trims or special editions (e.g., Ford ST, VW GTI) may use different light units than the standard model. Please check your existing bulb type before ordering to ensure correct fitment. This item is also known as: Standard Trade Ref Base Type Watt D3S 66340 / 42403 PK32d-5 35w

Read more less

Enhanced Edition D1S LED Replacement Bulb Upgrade – 6000K Ice White Upgrade your lighting with the Enhanced Edition D1S LED bulbs – a direct plug-and-play replacement offering up to 5x more brightness than standard OEM units. Designed to enhance night-time visibility while maintaining safe, non-glare output for oncoming traffic, these bulbs are the perfect upgrade for any vehicle using D1S fitment. Engineered to work seamlessly with self-levelling projector headlights, these high-performance bulbs deliver a crisp 6000K white light and improved road coverage without compromising your factory housing or lens. Whether you're upgrading for safety, performance, or aesthetics, IllumiNite delivers consistent, high-quality light output — every time. High Brightness Guaranteed Instant Start / Warm Up Stable Current Decoding & Error Free Thicker copper materials for excellent thermal conductivity Plug & Play using original plug Lower temperature for longer reflector lifespan! 🔧 Technical Specifications: Fitment: D1S Voltage: 12V Power: 45W / 4500lm Colour Temperature: 6000K Ice White Technology: LED (7545 CHIP) Compatibility: Suitable for Projector Headlights (won’t damage lenses) 📦 What’s in the Box? 2x IllumiNite D1S LED Bulbs 🛡️ Warranty & Returns 12-Month Warranty as standard 🚗 Vehicle Fitment Notice: Some vehicle trims or special editions (e.g., Ford ST, VW GTI) may use different light units than the standard model. Please check your existing bulb type before ordering to ensure correct fitment. This item is also known as: Standard Trade Ref Base Type Watt D1S 66144 / 85415 PK32s-2 35w

Read more less

Custom Car Number Plate Keyring – Personalised Reg Plate Keyring for Car Enthusiasts Add a personal touch to your keys with our Custom Number Plate Keyring, designed to replicate your actual car registration plate. Whether you're a proud car owner, collector, or just love a bit of custom flair, this keyring is the perfect accessory to show off your pride and joy. ✅ Customisable with your exact number plate✅ Durable Dual Layer 6mm acrylic construction✅ Colour Customisable for maximum visibility✅ Ideal gift for car lovers, new drivers or clubs✅ Lightweight yet strong – built to last Why choose our number plate keyring? Each keyring is made to order using high-quality materials that ensure long-lasting colour and detail. It’s lightweight enough for everyday use, yet tough enough to handle daily wear and tear. The miniature plate design mirrors UK registration plates, giving it a premium and authentic look. Choose whatever colour Face plate and back plate you want to give you a truly customised look. Perfect for: Personal use Gifts for new car owners Car club merchandise Show & shine accessories  

Read more less

Purpose-designed for the 2.0 TSI MQB 'Evo' engine, this is the largest-volume intercooler available for this platform. What it does.The factory intercooler on the 2.0 TSI MQB 'Evo' has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System uses a huge 70mm core to give a 96% volume increase over the factory cooler - making it the largest volume and best performing intercooler upgrade on offer for the 2.0 TSI gen.4. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.  Increased 70mm inlet and outlet sizes allow for higher flow versus the 60mm factory outlets, with matching Boost Hoses provided with the intercooler kit. Unlike most aftermarket intercoolers listed for the MQB 'Evo' platform, ours has been designed exclusively for the 2.0 TSI Gen.4 from the ground-up. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a 70mm high-speed core using extra tall internal tubes for maximum boost flow and a massive 96% increase in volume. BOOST HOSES INCLUDED Internally-wired OEM fitment 70mm boost hoses are included, multi-ply to resist heat deformation and burst pressure. Supplied with stainless steel Mikalor-brand clamps. FLOWED END TANKS Cast construction end tanks for minimal turbulence and restriction use internal flow guides to divert airflow up and down across the entire core depth, with enlarged 70mm inlet & outlet. Confirmed applications. 2.0 TSI MQB Evo / EA888 Gen 4 engines only VWR141000 > VW Golf 8 & 8.5 GTI 2020+ > VW Golf 8 & 8.5 GTI Clubsport 2020+ > VW Golf 8 & 8.5 R 2020+ > VW Arteon 2.0 TSI EA888.4 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI EA888.4 2021+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+ > Audi A3 2.0 TSI 8Y & 8Y.2 2020+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Audi SQ2 (facelift EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+ > Cupra Leon 4 & 4.5 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia 4 & 4.5 vRS 2.0 TSI 245ps NX 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+   Precision Engineered forPerfect Performance. Giant core volume of 19,404,000mm³ vs 9,895,200mm³ for the factory cooler core Internal flow guides to optimise internal air flow via cast end-tanks Sophisticated 'Plate & Bar' construction outperforms the cheaper, less-effective 'Tube & Fin' construction Multi-ply, reinforced Boost Hoses are moulded with internal steps to maximise laminar airflow Intercooler outlets are 70mm vs 60mm for the OE cooler for increased flow Intercooler Performance.It's all about air intake temperatures. The OEM factory intercooler on the 2.0 TSI MQB 'Evo' struggles with containing the all-important air intake temperatures, especially once power is upgraded. So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour. With a 70mm core-depth (vs 60-65mm for most other aftermarket intercoolers) and giant internal volume, the RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run. Intercooler fitment. To accommodate the giant size of the RacingLine Intercooler, some light trimming of the black plastic radiator carrier is required.   This trimming is minimal on popular models such as the Golf mk8, but more may be required on some other MQB 'Evo' models.   For reference, fitment is designed for radiator carrier –  VW Part No. / 5H0 805 588 J

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. 94mm / 3.7inch ID Turbo Outlet to 80mm / 3.15inch Downpipe with OR Without Cat, Includes OPF/GPF Bypass Key facts Pipe Ø: 3.70" (94.00mm) Barcode (GTIN): Fitting takes from 4.00 to 4.50 hours ALSO FITS: Seat Cupra Formentor 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Seat Leon Cupra Leon 2.0TSI 245ps (MQB Evo - OPF/GPF Equipped Models) 2022 and Later Skoda Octavia vRS 2.0 TSI 245PS (MQB EVO Mk4) Hatch & Estate (OPF/GPF Models Only) 2020 and Later Volkswagen Golf Mk8 GTi (245ps OPF/GPF Equipped Models Only) 2020 to 2024Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2021 to 2024 Volkswagen Golf Mk8.5 GTi (265ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Volkswagen Golf Mk8.5 GTi Clubsport (300ps OPF/GPF Equipped Models Only) 2024 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

ENCLOSED MST-VW-MK888 This is a performance enhancing induction kit for the Volkswagen Golf MK8 GTi EA888 EVO4 245bhp. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Red pleated filter Silicone inlet pipe Full fitting kit with easy step by step instructions AIRBOX & SCOOP MST-VW-MK99903 This is a performance enhancing induction kit for the EA888 Gen 3 VAG engines. For a full list of compatible vehicles please see fitment compatibility chart. This is a crosslinked Roto-Molded Polythylene version of the MST-VW-MK888 Features Improved throttle response Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black heat shield Black silicone inlet pipe Red dry pleated filter Turbo inlet elbow Black air scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020+ VW Golf GTi (MK8) 2.0 TSI 2020+ AUDI A3 8Y 2.0 TSI 2020+ CUPRA LEON MK4 2.0 TSI 2020+ CUPRA FORMENTOR 2.0 TSI 2020+ SKODA OCTAVIA MK4 2.0 TSI

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

 compatible for: Audi A3 1.8/2.0 TSI 2015 Onwards Q3 2.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ2 2.0TSI (2018-2021) TT Mk2 2.0  A31.8/2.0 TSI 2015 Onwards Q32.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ22.0TSI (2018-2021) TTMk2 Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Leon VZ1, VZ2, VZ3 Seat Leon Mk3 2012-2020 Skoda Kodiaq 2.0TSI (EA888 Gen 3) RS 2021- Octavia VRS 2.0 TSI 2013 Onwards Octavia 4 RS Superb 280 4x4 DSG Volkswagen Arteon 2.0 TSI Golf MK7 1.8 TFSI GTI GTI Clubsport ED40 R MK7.5 GTI  R MK8 Clubsport 45 GTI GTI S R Jetta MK7 (2018-2021) 2.0 GLI MK7.5 (2021-) 2.0 GLI Passat 2.0 TSI (2015-2021) T-Roc 2.0 2018-2021 Tiguan 2.0 TSI 2017 Onwards R 2022 Onwards (Gen 4) Touareg 2.0 TSI (2018-2021) Product Description Highlights: Power gains of up to 13BHP (when paired with the appropriate turbo inlet adaptor) Torque gains of up to 17NM (when paired with the appropriate turbo inlet adaptor) Pleated or foam filter available Greater engine sound Made in the UK Lifetime guarantee With our in-house VW Golf MK8R development vehicle we have been able to complete thorough testing on the EA888 gen4 platform, from rolling roads to track time. This has allowed us to create FMINDK44, the second induction kit we have available for the EA888 gen 3 and gen 4 platform (alongside our carbon fibre variant, FMINDK40). This kit features either a Forge Motorsport Ram Air high flow, pleated, synthetic nanofiber filtration filter or a Pipercross foam filter. Both are manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 2.0 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameter has been carefully tuned to provide exactly the correct quantity of air for consistent power gains throughout the rev range and minimising the chance of low-end torque loss; the pipework is specifically designed to feed the turbo without interruption. The result of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the EA888 engine. With the use of SolidWorks, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. The majority of our dyno testing was done on our VW Golf R MK8 EA888 Gen 4, as such you may find slight variations in gains when fitted to other vehicles sharing this engine. During the final prototypes testing we found that the induction kit with stock turbo inlet produced gains on average of 3.5BHP. However, when paired with our turbo inlet adaptor FMTIA5 (RHD), FMTIA6, or FMTIA9 (LHD), or FMINLMK7, this is where the stock EA888 gen4 engine saw impressive gains, increasing power up to 13BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 8BHP; while the drivability and the punch from extra torque increases can be felt on the road at between 4000RPM to the rev limit an average gain of 17NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power.     Why Do We Try To Decrease Inlet Air Temperatures (IAT’S)? By utilising the OEM cold air feed, and keeping the heat shield open on the headlight corner side we were able to see a decrease in IAT’s compared to the OEM during testing. By ensuring that the intake heat shield is open on this side it also means that vehicles being tuned to stage 2/3+ have a reduced risk of being restricted with them pulling in a greater quantity of air. Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance when tuning to stage1, stage 2 and beyond. Not only do you get the bhp performance benefits, but FMINDK44 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development has gone into this extraordinary performance induction kit. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. The kit has been designed not just to increase power but to fit a whole range of vehicles on the MQB platform. This goes as far as to include cars using the OEM turbo elbow and the Forge Motorsport FMTIA5/FMTIA6/FMTIA9 high flow elbows. With FMTIA5/FMTIA6/FMTIA9 using multi ply silicone, it has minimal flex; however the OEM inlet hose uses an accordion rib design which could cause the filter to damage itself or the heat shield. Unlike our competitors, we have included a P-clip and tab on the back of the heat shield, allowing the OEM inlet hose to be secured to the heat shield, meaning no damage and no annoying rattles! Time taken to install - around 1 hour

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Custom 4D Number Plate Tags – Pair | Fully Legal | Any Colour & Logo Add a bold, custom touch to your UK number plates with our CEUK 4D Number Plate Tags – fully road legal and made to match or enhance your 4D plates. These are not just stickers – they’re premium, 3mm acrylic tags with a raised 4D effect, available in any colour and logo combination you choose. Designed to stick to the left side of your number plate using weatherproof backing tape, these tags offer a fully customisable and stylish upgrade that complies with UK number plate regulations. ✅ Key Features: Sold as a Pair – includes 2x matching tags 100% Road Legal – 50mm wide to comply with DVLA size regulations Fully Customisable:• Choose tag colour• Choose logo/emblem• Choose logo orientation• Choose logo colour Weatherproof & Durable – designed to last in UK conditions Easy Fit – pre-applied adhesive for quick install 🛠️ Size Options: Option 1 – Standard Plates (No Frame): • H 110mm x W 50mm x T 3mm• Designed to fully cover the corner of any number plate without a frame Option 2 – Plates with Surround Frame: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit inside plate frames (may leave a small border) 💡 Note: Fit may vary slightly due to universal design. See product images for visual examples. Looking for something completely custom? Contact us at support@ceuk.org and our in-house design team will be happy to help you create a truly unique tag!

Read more less

Custom 4D Number Plate Tags – Fully Legal Acrylic Pair | Multiple Colours & Logos Take your number plate styling to the next level with CEUK’s Custom 4D Number Plate Tags – designed to perfectly complement 4D number plates, but also compatible with any standard UK number plate. Crafted from 3mm premium acrylic, these tags are 100% road legal at just 50mm wide, and adhere easily to the left-hand side of your plate using pre-applied, weatherproof adhesive backing. Sold as a pair (2 tags), each set is fully customisable to match your build’s style. 🎨 Customisation Options: Choose your tag colour Choose your logo or emblem Choose the logo orientation Choose the logo colour 📏 Size Options: Option 1 – For Plates Without Frames: • H 110mm x W 50mm x T 3mm• Designed to fully cover the plate’s left edge — ideal for plates fitted directly to the car. Option 2 – For Plates With Surround/Holder: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit cleanly within most number plate holders (see sizing disclaimer below). ✅ Key Features: Sold as a pair (2 tags included) Legal under UK number plate regulations Premium laser-cut acrylic (3mm thick) Weatherproof adhesive – pre-applied for easy install Designed and made in the UK by CEUK Perfect for adding personal or branded touches to your plate setup ⚠️ Disclaimer: Full-size tag (Option 1) is universal and may slightly overlap corners depending on plate shape — designed to fully cover edge areas. Smaller tag (Option 2) may leave a 1–2mm border between the tag and frame depending on your holder’s dimensions. 📩 Want Something Completely Custom? No problem — just email support@ceuk.org, and our design team will help bring your idea to life.

Read more less

Enhanced Edition H7 Mini LED Bulbs – Ultra Compact, 6000Lm Output (6000K Ice White) All the power of our popular V3 LED Bulb – in a compact, low-profile design.Introducing the Enhanced Edition H7 Mini, designed to deliver exceptional brightness and clarity while eliminating the bulk of traditional LED upgrades. This is the perfect solution for tight-fit housings or vehicles with limited rear clearance. Ideal for dipped beam, high beam, or fog light applications, the H7 Mini fits any vehicle using a standard H7 fitting – no adapters, clips, or caps required. 💡 Why Choose the H7 Mini? Massive 6000Lm per bulb output – crisp 6000K Ice White Micro-sized cooling fan built into the shaft – no bulky heat sink Zero polarity issues – 4-point design works in multiple orientations Plug & Play Installation – fits directly into H7 sockets with no mods Compatible with projector and reflector housings ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K (Ice White) Lumen Output: 6000Lm per bulb Fitment: H7 (replaces OEM halogen) 📦 What's in the Box: 2x H7 Mini Enhanced Edition LED Bulbs Default colour: 6000K Ice White Supplied with 12-month CEUK warranty (keep packaging if longer warranty is stated) ⚠️ Vehicle Fitment Note: While this bulb fits all standard H7 sockets, spec-level variants (e.g. Ford ST, VW GTI) may use different housings. Please confirm bulb type before ordering by checking your existing unit. Installing LEDs may trigger a dashboard bulb error on some vehicles. This is harmless and explained in our FAQs. This item is also known as: Standard Trade Ref Base Type Watt H7 477 PX26d 55w

Read more less

Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) FITS: AUDI  RS3 8V Saloon/Sedan 17-18 Non-GPF Model RS3 8V Saloon/Sedan 19-20 GPF Model RS3 8V Sportback 15-17 PFL RS3 8V Sportback 17-18 Facelift Non-GPF Model RS3 8V Sportback 19-20 Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift Non-GPF Model S3 2.0T 8V (3 Door & Sportback) PFL S3 2.0T 8V (Saloon) Facelift GPF Model S3 2.0T 8V (Saloon) Facelift Non-GPF Model S3 2.0T 8V (Saloon) PFL S3 2.0T 8Y Quattro (Saloon) GPF Model S3 2.0T 8Y Quattro (Saloon) ROW S3 2.0TFSi 8Y Quattro (Sportback) GPF Model S3 2.0TFSI 8Y Quattro (Sportback) ROW SQ2 19-24 TT MK3 2.0TFSi Quattro Non GPF Model TT RS MK3 GPF Model TT RS MK3 Non GPF Model TT S MK3 Coupe Non-GPF Model CUPRA Formentor 2.0 TSI 4Drive Leon 245 GPF Model Leon 245 ROW Ateca Leon ST VZ 4Drive SEAT Leon Cupra 2.0 TSI 280, 290 & 300 Non GPF Model Leon Cupra 2.0 TSI 280/290 ST Leon Cupra 2.0 TSI 290 GPF Model Leon Cupra ST 300 4Drive (GPF Model) Leon Cupra ST 4Drive Carbon Edition SKODA Octavia vRS 2.0 Tsi VW MK7 Golf Estate R (pre facelift) MK7 Golf GTi (including Clubsport & Clubsport S) MK7 Golf R (pre facelift) MK7 GTD MK7.5 Golf Estate R (facelift) GPF Model MK7.5 Golf Estate R (facelift) Non GPF Model MK7.5 Golf GTi (Non-GPF Model) MK7.5 Golf GTi (TCR & GPF Models) MK7.5 Golf R (facelift) GPF Model MK7.5 Golf R (facelift) Non GPF Model MK8 Golf GTI Clubsport GPF Model MK8 Golf GTI Clubsport ROW MK8 Golf GTI GPF Model MK8 Golf GTI ROW MK8 Golf R GPF Model MK8 Golf R ROW Polo MK6 (AW) GTi

Read more less

Enhanced Edition H8/H11 Mini LED Bulbs – Ultra Bright, Compact Fit (6000K Ice White, 6000Lm) All the power of our V3 LED bulb – in a sleek, compact design.Introducing the CEUK Enhanced Edition H8/H11 Mini LED Bulbs, engineered for maximum output and perfect fitment in tight headlight or fog light housings. These bulbs deliver a massive 6000Lm per bulb and feature a compact heat management system – ideal for modern vehicles where space is limited. Compatible with H8 and H11 fitments, these bulbs are perfect for fog lights, dipped beams, or high beam upgrades, delivering clear, crisp 6000K Ice White light with superior reliability. 💡 Key Features: 6000Lm Output Per Bulb – 6x brighter than most OEM halogens Ultra-Compact Design – mini cooling fan built into the shaft, no bulky heat sink Plug & Play Fitment – no adapters, clips, or caps needed 12V, 28W Power Efficiency Zero Polarity Issues – works in any orientation Suitable for Projector & Reflector Housings Safe for OEM Components – no CANBUS interference on most vehicles ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K Ice White Lumen Output: 6000Lm per bulb Fitment: H8 / H11 📦 What’s in the Box: 2x H8/H11 Enhanced Edition LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (retain packaging if warranty is extended) ⚠️ Fitment Note: Always double-check your vehicle's bulb type – special editions (e.g., Ford ST, VW GTI) may differ from standard specs. Some vehicles may display a dashboard error message when LEDs are installed – this is harmless and addressed in our FAQs. This item is also known as: Standard Trade Ref Base Type Watt H8 708 PGJ19-1 35w H11 711 PGJ19-2 55w

Read more less