Performance - Ford Fiesta MK8 ST (2018-2024)

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the  Show Day Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK by CEUK, this lightweight and secure Stainless Steel prop is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets / doors / boots open, whether or not your vehicle has gas lift struts. Crafted from Air Grade Stainless Steel and featuring precision-machined billet aluminium components with stainless steel fixings; then finished in a coloured polyolefin coating, the Show Day Prop offers both functionality and a sleek, professional appearance. Shaft Made from Stainless Steel, the shaft is ultra-thin at just 6mm and lightweight, with no wrapping or skinning. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. Lower Fixing The lower fixing features a precision bend, with a rubber cap to prevent scratches or damage to the vehicle. Extendability: The upper fixing has a 4cm / 40mm extendable thread, which can be raised to give a longer prop. Sizing Length of Prop Section only: 500mm / 50cm Total length when fully extended: 570mm / 57cm Adjustment Capability when installed: 53cm / 57cm

Read more less

09D Carbon Fibre Battery Clamp – Lightweight. Stylish. Unapologetically Over-Engineered. The 09D Carbon Fibre Battery Clamp is an unapologetically premium upgrade, designed to elevate your engine bay with aesthetic precision and motorsport inspired materials. While its primary role is to secure your battery, we know the real goal is to make everything under the bonnet look, 'just right'. Featuring dry carbon fibre weave tubes paired with CNC machined 6082 aluminium brackets, this clamp is lightweight, rigid, and crafted to match the visual identity of our carbon fibre induction kits and 09D oil filler caps.Every component is machined in house and hand-assembled with obsessive attention to detail, because that’s how we do things.Key Features & Benefits:  Dry Carbon Fibre Construction - Lightweight twin carbon tubes provide strength and style, without unnecessary bulk or gloss.CNC-Machined 6082 Aluminium - All brackets and clamps are precision-machined in-house for perfect fitment and top-tier finish.Anodised Finish - Protects against corrosion while offering a clean, stealthy aesthetic to complement your bay.Matches Our Carbon Induction Kits and Oil Cap - Complete the look with a visually unified set of 09D components.

Read more less

Upgrade your Fiesta ST, Puma ST, or Focus ST engine bay with the ZERONINE DESIGN Billet Aluminium Oil Filler Cap. Packed with ZERONINE DESIGN touches as you might expect, from the knurled body, to the intricate top section… but there’s much more to this cap than meets the eye. Designed and manufactured in the UK from CNC-machined aerospace-grade billet aluminium, this meticulously crafted cap features an innovative two-piece construction with a temperature stable key-operated opening and closing system, adding a new layer of functionality and convenience... it even doubles as a keyring! Key Features: Two-Piece Keyway design: The two-piece design separates the key from the oil cap itself, enabling easy opening and closing, regardless of the caps temperature. Enhanced Accessibility: Designed specifically to address clearance issues, the raised keyway offers unobstructed access, bypassing possible interference from the OEM engine cover. Thermal Isolation for Safety: The Acetal construction of the keyway section serves as an effective thermal barrier, minimising heat transfer from the filler cap and protecting your hand when working on a warm engine. Anodised Black Finish: Anodised in a sleek, deep black for maximum corrosion resistance and long-lasting visual appeal, making it a standout feature in any engine bay. Diamond Knurled Contact Area: For added grip and tactile feedback, the surface contact zone also features a precision diamond knurl, enhancing usability even with oily or gloved hands. Laser-Etched Branding: Proudly showcasing the ZERONINE DESIGN logo in crisp, laser-etched detail, the cap reflects the same attention to quality and design that goes into every component we make. Supplied complete: with Oil filler cap, acetal key tool, key chain and sealing O-ring Combining practical innovation with premium craftsmanship, the ZERONINE DESIGN oil filler cap offers an elegant, aesthetic engine bay boost for those that love a good looking engine bay... and let's face it, who doesn't?!

Read more less

The ZERONINE DESIGN oil catch can kit for the Mk8/8.5 Fiesta ST and Puma ST, is an extensively developed system that helps ensure your direct-injection engine is working at peak efficiency, helping to remove any unburnt oil vapour from the intake system, preventing build-up on valves and ensuring efficient combustion.The complete kit requires no drilling, is fully serviceable and uses pre-formed plastic lines with OE-style connectors, for quick and easy installation. Features and Benefits:Reduces oil vapour entering the intake: Less oily residue means reduced intake sludge, keeping the throttle body, MAP sensor, and intercooler cores cleaner for years. Slows intake-valve carbon build-up (DI engines don’t wash the valves with fuel): Maintains smoother idle and more stable low-rpm response as deposits accumulate more slowly and improves airflow and compression efficiency. Lowers knock tendency from oil vapour in the combustion mix: More stable ignition timing (less knock correction) can make the car feel sharper in hot weather or on track. Reduced detonation events protect pistons, rings, and spark plugs, supporting consistent power over the life of the engine. Reduces oil contamination and dilution pathways: Less blow-by oil recirculated into the intake means fewer fuel-rich, sooty deposits, which helps keep the PCV tract healthier.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Tidy up your engine bay with a Proform Engine Bay Slam Panel cover.  These parts fit neatly over the existing factory slam panel.  Taking literally minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part.  Fixings and fitting instructions are included. Available in a range of finishes including our new Deluxe Carbon Fibre Effect Plastic.  These are also available in our top of the range painted and hydrodipped finishes as a custom order - please contact us for details. 'Speed Shapes' shown are for colour demonstration purposes only.  

Read more less

  Tidy up your engine bay with a Proform ECU Cover. Supplied in a choice of finishes including smooth plastic (which comes ready to be prepped and painted/hydrodipped), OEM textured plastic for the factory look, a range of coloured plastics and our gloss carbon fibre effect plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered (but can be painted to order - contact us for details). Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting parts may contain manufacturing marks that would be easily removed during the preparation process. NB: Please note raw parts may contain manufacturing marks that are easily removed during the preparation process.

Read more less

  Tidy up your engine bay with a Proform Air Intake cover. Available in smooth plastic, which comes ready to be prepared, sanded and painted/hydrodipped, OEM factory style textured plastic and a range of coloured plastics including our two carbon fibre effect finishes. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fitting over the top of your factory parts, these covers can be easily removed for servicing or should you fancy changing the theme of your engine bay. Fits all Mk8/8.5 Fiesta ST and Mk2 Puma ST vehicles (only).  Please note this part may need to be trimmed slightly if you have certain aftermarket induction kits fitted.  Please contact us if you are unsure. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

 Tidy up your engine bay with a Proform Engine Bay Slam Panel cover.  These parts fit neatly over the existing factory slam panel.  Taking literally minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part.  Fixings and fitting instructions are included. Available in a range of finishes including our new Deluxe Carbon Fibre Effect Plastic. 'Speed Shapes' shown are for colour demonstration purposes only. Please note smooth for painting parts may contain minor manufacturing marks which will be easily removed during the preparation process.

Read more less

Bonnet latch surround with stainless fittings fits all Focus Mk8 models including ST-Line and ST200. Surround has cut out for bonnet ajar switch Fitting is really simple, remove old bonnet latch bolts, fit new stainless latch surround and secure with new stainless bolts provided. Part no: ASCOVFO109

Read more less

Designed to fit Fiesta MK8 ST-Line.This cover, covers up black plastic auxiliary fuse box cover which is located in the Engine bay.Finished in mirror finish stainless steel and comes with strong self-adhesive pads for easy fitting.

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 10 piece Under Bonnet Panel set. CNC machined from high quality plastic, these panels are much lighter than stainless steel mirrored plates, reducing the additional weight on the bonnet and the risk of them falling off. Supplied in a range of plastic finishes, these parts are available with or without double sided tape as some customers prefer to fit the parts with sealant or their own adhesive tape. Please note these parts may need to be modified if you have bonnet vents fitted, but the material is easy to cut. Some photos show parts still with protective film on.  High gloss/reflective finish underneath.  Please note that due to the positioning of the turbo on the Pre-2020 1.0 Ecoboost Engines, these panels could slightly distort due to heat.  We would recommend replacing the tape for magnetic tape on specific panels for show use only.  Please contact us for details. Guaranteed fit for Ford Fiesta Mk8 Ford Fiesta Mk8 ST Ford Fiesta Mk8 ST-Line

Read more less

Welcomed into our Enhanced Performance (By CEUK) Range is our all new Battery Tie Down! Machined from Billet Aluminium, the brace is designed to tightly and securely hold your battery in place - Replacing the old, nasty rusty looking brace and Enhancing the look of your engine bay! Featuring the Iconic EP Logo on the front, this is purely simplistic and modern!  Supplied with 2x Stainless Steel Marine grad chemical resistant replacement nuts! What's included? : 1x Battery Tie Down - Black 2x M6 Stainless Steel A4 Nuts Fitting Instructions Fits all MK8 & MK8.5 Fiesta's

Read more less

Description Brighten up your car key with a colour coded key cover! Professionally painted to match (or contrast if preferred) the colour of your car, these covers clip easily around your existing key. This is not a replacement shell, this product clips around the grey plastic shell supplied by Ford from the factory. Fitting takes a matter of seconds. These will fit any 'Keyless Start' key in the shape pictured but will not fit the 'Flip' style keys.  Just some of the compatible models include: Ford Fiesta Mk7.5 (inc ST) Ford Fiesta Mk8/8.5 Ford Focus Mk3/3.5 (inc RS/ST) Ford Puma Mk2 A small lanyard is supplied to help keep the key rings away from the paint but we strongly advise removing your key from your bunch of keys before fitting to avoid potential contact damage in your pocket.  The paint finish is resilient but not indestructible so dropping the item onto a hard surface (concrete etc) may result in damage. Please read fitting instructions supplied before attempting to fit item to existing key.   Guaranteed fit for Ford Fiesta Mk7.5 Ford Fiesta Mk8 Ford Fiesta Mk8.5 Ford Fiesta ST180 Ford Focus Mk3 Ford Focus Mk3.5 Ford Focus Mk4 Ford Puma Mk2

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk 6/7/8 Fiesta and Mk 2/3/4 Focus models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our newly revised domed Proform Brake Fluid Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all derivatives of the Mk6/7/8 Fiesta and Mk2/3/4 Focus models. NB: Please note smooth plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Diesel Oil Cap Cover. This item fits over your existing cap. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk7 Fiesta and MK3 Focus models with diesel engines. This item will not fit the petrol variants. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Engine Bay coolant cover. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the coolant tank cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Fits all Mk8  Fiesta variants (inc ST Line) and the new Fiesta MK8 ST  Fitting instructions included. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Fuse Box Cover. Supplied in raw plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk8 Fiesta models but please compare the photos to the shape of the fuse box on your vehicle to be certain before purchasing. Fitting instructions included. NB: Please note these parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform engine cap cover kit. The kit includes: Coolant Cap Cover Brake Reservoir Cap Cover Engine Oil Cap Cover All covers come ready to be fitted - they simply fit over your existing engine caps. Supplied in raw plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Please note these are not our hydrodipped caps - these are available in the painted cap listing.  Why not pair this item with our Custom Cap Vinyl Sticker Set? Covers fit all variants of the MK6/7/8 Fiesta and MK2/3 Focus petrol or diesel, please look through the photographs and select the relevant oil cap variant for your car. The coolant and brake fluid caps are the same on all models, you just need to check which oil cap you have fitted on your vehicle and ensure it matches the photograph.

Read more less

The rear A/C cover is a simple yet effective part which sits neatly over the pipe work, tidying up pipework and providing nice clean lines. Supplied in raw plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. These covers are also available in our show car standard paint and hydrodipped finishes for that truly custom look. This cover comes complete with step by step instructions and a fitting kit. This cover works very nicely with our coolant cover and the two cap covers which can also be seen in the photographs. Fits the Mk8 Fiesta ST and Mk2 Puma ST models only. Please note raw items (smooth for painting) may contain minor manufacturing marks which will be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Battery Cover. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the battery cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Fits all Mk8 Fiesta variants, including Ecoboost and ST Models. Please select below: Fitting Instructions included. NB: Please note raw plastic parts may contain manufacturing marks that will be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Airbox Cover. Supplied in a choice of finishes from smooth plastic, which comes ready to be prepped and painted/hydrodipped and OEM textured plastic for the factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the airbox cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Currently only available for the Mk8 Fiesta ST and Mk2 Puma ST (ST Variants Only). Fitting Instructions included. Please note raw items (smooth for painting) may contain minor manufacturing marks which will be easily removed during the preparation process.

Read more less