Performance - Ford Fiesta MK8 ST (2018-2024)

Carbon Fibre effect vinyl gel designed to cover over the complete climate control panel of the Mk8 Fiesta Please note that extra care should be taken when handling this product as the item could become stretched out of shape if pulled too heavily All PPS items are made to order and may carry a lead time of 5-7 working days

Read more less

Boot Lid Gel Exclusively for the "ST EDITION" range of Ford models. Currently available on the Mk8 Fiesta & Mk4 Focus Black Background with Sky Blue logo Comes with generic "1 of 300". We can provide with a specific number upon request free of charge. Please leave a note at the checkout if you would like this. Example below: #34 of 300 Size: 90 x 12mm

Read more less

Designed to cover over the airbag light on the center of the dash Exclusively designed for the ST EDITION model of the Mk8 Fiesta Comes with generic "1 of 300". 

Read more less

PLEASE CHECK YOUR KEY HOLE SECTION IS 20MM BEFORE ORDERING! 20mm gel badge which will cover the driver door key hole Fits the following models (may also fit others, please measure first): Fiesta Mk7 / 7.5 Focus Mk3 & 3.5

Read more less

By PrintPeel&Stick for CEUK FITS PRE FACELIFT MK8 ONLY Eyeliner fits around the bottom & front edge of the headlights Available in two styles: Single (1 part per side) Split (2 parts per side)

Read more less

Cut to shape ready for install Fits Mk8.5 Fiesta ST or ST Line This does not fit the mk8 pre-facelift Inner Decals fit on the plastic fog light trim Consists of 4 parts (2 each side)

Read more less

Cut to shape ready for install Fits Mk8 Fiesta ST or ST Line This does not fit the mk8 pre-facelift Outer Decals fit on the bumper above the plastic fog light trim Consists of 2 parts (1 each side) Pink inner parts shown in these photos are NOT included with this product   PLEASE BE AWARE THIS IS FOR THE STICKER SHOWN IN GREY VINYL SHOWN IN THE IMAGES! THE PINK STICKER IS SOLD SEPERATELY AS A PAIR! LINKED BELOW: CLICK HERE TO VIEW THE VINLY DECAL SHOWN IN PINK!

Read more less

By PrintPeel&Stick for CEUK   Add some colour to the interior of your Mk8 Fiesta with these coloured gel cover strips! 2 x Gel strips to cover the two chrome strips on the door handles Set only comes as one single colour. Mix & Match not available on this product Please note that extra care should be taken when handling this product as the item could become easily stretched out of shape if pulled too heavily

Read more less

By PrintPeel&Stick for CEUK FITS PRE FACELIFT MK8 ONLY Eyeliner fits around the bottom & front edge of the headlights Available in two styles: Single (1 part per side) Split (2 parts per side)

Read more less

PLEASE LEAVE A NOTE TO INFORM US ON THE INFORMATION REQUIRED FROM BELOW! (LOGO AND Background COLOUR) Logo Cut Out Options: No Logo , ST, ST Line, ZS Logo (Solid), ZS Logo (Outline),Ford Performance, CEUK   Logo Colour's: White & Red, White & Primrose Yellow, White & Light Primrose Yellow, White & Orange, White & Light Orange (Ford Orange Fury),White & Magenta, White & Bright Blue, White & Gentian Blue, White & Light Blue, White & Sky Blue (RS Nitrous Blue), White & Lime, White & Violet, White & Cadbury Purple Not Required (No Logo), Black, White, Primrose Yellow, Light Primrose Yellow, Orange, Light Orange (Ford Orange Fury), Red, Dark Red, Pink, Magenta, Telemagenta, Violet, Cadbury Purple, Delft Blue, Pacific Blue, Marine Blue, Brilliant Blue, Bright Blue, Gentian Blue, Light Blue, Sky Blue (RS Nitrous Blue), Turquoise, Petrol, Mint, Green Yellow, Lime, Grass Green (Ford Mean Green), Green, Emerald Green, Light Grey, Grey, Dark Grey, Komatsu Grey, Copper, Gold Usually ready in 5+ days Fits inside door handle recess We suggest fitting these on a table. The plastic covers behind the handle simply pop off by pushing the top left or right corner of the cover Sold in pairs Many Logos & colour combos available Please contact us for custom designs

Read more less

Usually ready in 5+ days Mk8 Fiesta Lower Side Stripe. This side stripe follows the lower fold line of the doors and body Available plain or with a logo cut into the stripe to reveal the body colour underneath Fits all models of the Mk8 Fiesta (excluding active) Cut to shape ready for install Fits Mk8 Fiesta (3 or 5 door)

Read more less

Pickup available at PrintPeel&Stick, Unit A7 Seedbed Centre, Usually ready in 5+ days New extended version that flows round to the edges of the boot lid Cut to shape ready for install Fits all Mk8 Fiesta's

Read more less

For later models with 32mm plain door card speaker grills Add some colour to the interior to the B&o speaker grill with these gel badge covers! 1 x 15mm & 2 x 32mm B&o gel stickers to cover the three front speakers (front, left & centre speaker) Set only comes as one single colour with a black "B&o" logo. (Dark colours will have a light grey logo). Mix & Match not available on this product Fits the following: Mk8 Fiesta Mk4 Focus Mk3 Kuga 2020 Puma This will also fit other new generation fords that use this same type of speaker grill. Please measure before purchasing This will not fit vehicles without the B&o speaker upgrade. Please see our other product for standard speakers

Read more less

Fits perfectly over the top of the middle brake light Extremely simple to fit. Simply clean the surface, peel & stick! 2 minute job! Range of logo's to select from Please contact us for custom logo's / text! Fits all models of the Fiesta Mk8

Read more less

Red with white "Engine Start/Stop" text and logos Fits the following: Mk8 Fiesta Mk4 Focus. 2020 Puma This will also fit other new generation fords that use this same type of start button

Read more less

Add some colour to the interior of your car with these coloured gel cover strips! 2 x Gel strips to cover the two chrome strips on the steering wheel controls Please note that a small part of the chrome will still be visible where they fold inwards Set only comes as one single colour. Mix & Match not available on this product Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma This will also fit other new generation fords that use this same type of steering wheel. Please check before purchasing Please note that extra care should be taken when handling this product as the item could become easily stretched out of shape if pulled too heavily Please note that there is an addtional 2 days lead time for gel products Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch

Read more less

Carbon Gel Overlay for Card Slot Will not fit all models, please check your car model before purchasing Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma May also fit other newer models.

Read more less

Carbon Fibre effect vinyl gel designed to cover over the complete control area of the headlight control panel. Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma Will fit other models using the same panel Please note that extra care should be taken when handling this product as the item could become stretched out of shape if pulled too heavily

Read more less

Carbon Fiber effect vinyl gel designed to cover over the complete Sync 3 control panel Fits the following: Mk8 Fiesta 2020 Puma Will fit other vehicles using the same sync platform (must look exactly the same as the images) Please note that extra care should be taken when handling this product as the item could become stretched out of shape if pulled too heavily This product design is protected by the Intellectual Property Office. Registration no: 6087223

Read more less

Add some colour to the interior with these speaker grill gel badge covers! 2 x 32mm gel stickers to cover the two front door speakers Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma This will also fit other new generation fords that use this same type of speaker grill. Please check your car has 32mm recesses in the grill before purchasing This will not fit vehicles with the B&o speaker upgrade

Read more less

Add some colour to the interior to the B&o speaker grill with these gel badge covers! 3 x 15mm B&o gel stickers to cover the three front speakers (front, left & centre speaker) Set only comes as one single colour with a silver "B&o" logo. Mix & Match not available on this product Fits the following: Mk8 Fiesta Mk4 Focus Mk3 Kuga 2020 Puma This will also fit other new generation fords that use this same type of speaker grill. Please measure before purchasing This will not fit vehicles without the B&o speaker upgrade. Please see our other product for standard speakers

Read more less

28mm Gel Start button  Comes with black background and a selection of logos in various colour options Please note that colour options for "Revo" logo will only change the letter "O", keeping a standard white colour for the "Rev" part Fits the following: Mk8 Fiesta Mk4 Focus. 2020 Puma This will also fit other new generation fords that use this same type of start button

Read more less

A pair of wing vinyls to fit the Mk8 Fiesta. Prices start from £25 for a pair of plain strips. Add our logo! If purchasing with logos cut out, please remember to message us with your logo requirements after ordering. Please leave the details in the "notes" section at checkout  Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch *** Please note that it is advised that these are fitted by a competent person / professional installer as some heat and slight stretching is required when folding under the wheel arch. Refunds will not be issued for errors in fitment. ***   Please add a note to your order at checkout with your 3 selected Logo's: NO LOGOS! CEUK EIBACH MAXTON DESIGN REVO SCORPION VUDU

Read more less

Add some colour to the interior of your Mk8 Fiesta with these coloured gel cover strips! 4 x Gel strips to cover the two chrome strips on the air vent direction handles.  Set only comes as one single colour. Mix & Match not available on this product Please note that extra care should be taken when handling this product as the item could become easily stretched out of shape if pulled too heavily    Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch Please note that there is an addtional 2 days lead time for gel products

Read more less