Performance - Ford Focus MK2 (2004-2010)

CEUK Enhanced Edition Sequential Indicator Units – For MK2 Focus (Facelift) & MK3 Focus (All Models) Give your Focus a sleek, modern upgrade with CEUK’s Enhanced Edition sequential mirror indicators – the perfect complement to our LED front and rear indicators. Designed for effortless installation, these full replacement units offer dynamic amber sequential lighting, a plug-and-play fit, and full CANBUS compatibility for error-free operation. 🔧 Key Features: 🔁 Amber Sequential Strobe EffectSmooth, flowing LED motion adds a high-end look and improved visibility. 🔌 Full Replacement UnitNo bulb swaps or lens mods – remove your OEM unit and replace it with this pre-built CEUK upgrade. ✅ CANBUS Error-FreeEngineered for compatibility with your Focus – no dashboard errors, no resistors required. 🧩 Simple Plug-and-Play InstallationDesigned for direct fitment without coding or rewiring. 📦 What’s Included: 1x Pair of CEUK Sequential Indicator Units (Left & Right)Pre-installed amber LEDs in custom-fit housings 🚗 Vehicle Compatibility: ✅ Ford Focus MK2 Facelift models ✅ Ford Focus MK3 All models and trims 🛡️ Warranty: Covered by a 12-month CEUK standard warranty(If your packaging specifies longer, please retain it for warranty support) 💡 Better Looks, cleaner design, and zero hassle.⚡ The Enhanced Edition – Made to match your build.

Read more less

Be Seen from Every Angle – CEUK Enhanced 380 Stop/Tail LED Bulbs Introducing the all-new 380 Stop/Tail LED Bulbs from CEUK – designed to dramatically improve the visibility and output of your rear lighting. These dual-function LEDs act as both your tail light and brake light, offering a crisp, bright red glow for safer, sharper signalling. 🔧 Key Features: 🔴 Dual-Function OutputActs as both a rear side/tail light and a stop/brake light – replacing your existing combo bulb. 💡 30 High-Powered Red LEDsEngineered for maximum brightness and clarity, even in daylight conditions. 🔥 Up to 90% Brighter than OEMImproved visibility means better safety – for you and everyone behind you. ⚡ Low Power ConsumptionLED efficiency helps reduce electrical load and prolong component life. ✅ CANBUS FriendlyCompatible with 99% of vehicles without triggering dash errors.* 🔌 Plug & Play InstallationInstalls in seconds with no modifications required. 📦 Specs & Fitment: Bulb Type: 380 / P21/5W / 1157 LED Count: 30 per bulb LED Colour: RED Voltage: 12V Sold as a PAIR This item is also known as: Standard Trade Ref Base Type 380 P21/5w / 1157 BAY15d ⚠️ Important Fitment Notes: These bulbs are for vehicles with stop/tail light function, where one bulb performs both side light and brake light roles. Some trims (e.g., Ford ST, VW GTi) may use different lighting units than standard models. Please check your existing bulb type before ordering. *Rarely, LEDs may trigger harmless dash messages in some vehicles – see our FAQs for solutions. 🛡️ Warranty: Backed by a 12-month CEUK warranty from the date of receipt(If packaging states longer, retain it as proof for extended warranty claims) 💡 Stronger signal. Sharper style. Reliable fitment.🔥 Upgrade to CEUK Stop/Tail LEDs and make every press of the pedal count.

Read more less

Introducing the CEUK #Enhanced Edition H4 LED Upgrade – Dip & Main Beam Performance Without Compromise Vision. Without Restriction.The #Enhanced H4 LED Headlight Bulb Kit offers unrivalled visibility, full control over colour temperature, and true plug-and-play convenience. Designed to fit in place of your OEM H4 bulb, this kit delivers a powerful 12,000-lumen output while remaining compatible with most headlight builds – including projector and reflector housings. 🔧 Key Features: 🔆 Ultra-High Output – 12,000 lumens (6,000 per bulb) for next-level road visibility ❄️ 6000K Ice White Default Colour – Clean and modern lighting for any build 🎨 Custom Colour Output with DIY Tint Film – Switch to: 3000K Yellow (ideal for fog or snow) 8000K White/Blue (stylish xenon-style glow) 🔌 Plug-and-Play Installation – DIY-friendly design with OEM-style fit 🌙 Reduced Eye Strain – Better beam pattern helps reduce glare and night-driving fatigue 🔄 Integrated Driver & Heat Dissipation Unit – Built into rear housing for compact installation Note: Some vehicles may require an additional clip for secure installation. Contact CEUK directly to confirm compatibility with your car. 📦 What’s in the Box? 2x H4 #Enhanced LED Bulb Units (6000K default) 2x Yellow Tint Films (3000K) 2x White/Blue Tint Films (8000K)(HID clip not included – available separately if required) ⚙️ Technical Specifications: Voltage: 12V Wattage: 50W per bulb Total Lumens: 12,000 (6,000 per bulb) Fitment: H4 Compatibility: Projector & Reflector Headlamps This item is also known as: Standard Trade Ref Base Type H4 472 P43t ⚠️ Fitment Notes: This bulb has a built-in rear heat sink/driver. If your headlight housing is particularly tight, please check fitment before purchasing. Some vehicles (e.g., performance trims like Ford ST or VW GTi) may require different clips or mounts. LED upgrades may occasionally trigger a dashboard error message – a harmless side effect of the low power draw. Visit our FAQ page for easy solutions. 🛡️ Warranty: Backed by CEUK’s 12-month warranty(Retain packaging if an extended warranty is stated) 💥 Take control of your light. Take control of your drive.⚡ CEUK #Enhanced H4 LED Kit – When performance meets personalisation.

Read more less

CEUK Full Replacement LED Mirror Puddle Light – For MK2 & MK3 Ford Focus Upgrade your side-entry visibility with the latest full LED mirror puddle light unit from CEUK. Designed as a complete plug-and-play replacement, this upgraded unit delivers significantly brighter output, better durability, and a fully sealed waterproof design — all in a 5-minute install. Developed by the same team behind our best-selling number plate units, this light is built to outperform. 🔧 Key Features: 🔆 Ultra Bright OutputFitted with extra LED chips to deliver maximum light coverage when entering/exiting your vehicle. 🔌 Plug & Play Installation501 fitment. No tools or modifications required – installs in under 5 minutes. 🛡️ Fully Sealed, Waterproof UnitNow supplied with a rubber bung to seal where the cable enters the unit – protecting against water ingress and extending lifespan. ⚡ Low Power Draw, High EfficiencyDraws less power than halogen, while providing a far brighter result. ✅ Error-Free OperationDesigned to work CANBUS-safe on most vehicles – no dashboard errors or coding required. 📦 Specs: Fitment: 501 Voltage: 12V LED Type: High-output white SMD chips Installation: Direct replacement for OEM puddle lights Included: Rubber cable-sealing bung 🚗 Vehicle Compatibility: Ford Focus MK2 (All Facelift models) Ford Focus MK3 (All models and trims) Note: Some special editions (e.g., ST or RS) may use different fitments – please verify before purchase. 🛡️ Warranty: Backed by a 12-month CEUK standard warranty(Retain packaging if a longer warranty is stated) 🌙 Brighten every step – with style, performance, and durability.⚡ CEUK LED Puddle Light Unit – A small change that makes a big difference.

Read more less

Ultra Bright T20 LED Reverse Light Bulb – 33SMD Power & Error-Free Performance Increase your rear visibility with the CEUK T20 LED Reverse Light, designed for maximum brightness and OEM+ reliability. Built with 33 surface-mounted LEDs (SMDs), this unit delivers superior light output while maintaining full CANBUS compatibility on most vehicles. Perfect for reversing at night or in low-light environments, especially on Ford Ranger T6 Facelift models. 🔧 Key Features: 🔆 33 High-Output SMD LEDs – Delivers an intense, wide-spread white beam for improved safety ⚠️ Error-Free Performance – Designed to work with most CANBUS systems without triggering warnings 🔌 T20 Base (7440 Fitment) – Direct replacement for factory halogen bulbs 🛻 Ideal for Ford Ranger T6 Facelift – Tested for compatibility and performance 🧩 Plug & Play – No coding, no fuss ✅ Sold Individually – Add 2 to your basket for a full set 📦 Specs: Fitment: T20 / 7440 LED Type: 33SMD Voltage: 12V Compatibility: Most vehicles with T20 reverse light sockets Sold As: Single unit (1 bulb) 🛡️ Warranty: Backed by CEUK’s 12-month standard warranty(Retain packaging if a longer warranty is stated) 🚗 Vehicle Fitment Note: Some vehicles, especially special editions (e.g., Ford ST or VW GTi), may use different light units or bulb types. Please confirm the correct fitment for your vehicle before purchasing. Dashboard Error Messages? LED upgrades can sometimes trigger harmless warnings – check our FAQs for solutions. ⚡ Brighter reverse lighting starts here. Upgrade with CEUK’s T20 33SMD LED for powerful, clear output when you need it most.

Read more less

  CEUK #Enhanced Edition HIR2 (9012) LED Dip Beam UpgradeVision, Without Restriction. Performance Without Compromise. Experience next-level night-time clarity with CEUK’s #Enhanced Edition HIR2 / 9012 LED Upgrade – engineered for drivers who want OEM-style fitment with unmatched brightness and customisable output. With cutting-edge LED tech, these bulbs provide a powerful 6000K ice white beam, while drawing less power and emitting less heat than older systems. And thanks to our exclusive DIY tint film system, you can change the light colour to 3000K (yellow) or 8000K (white/blue) based on driving conditions or personal style. 🔧 Key Features: 🔆 12,000 Lumens (6000 per bulb) – Massive brightness, crystal-clear vision 🎨 3-in-1 Colour Output – Default 6000K + 2 film overlays (3000K & 8000K included) ⚙️ Direct OEM Fitment – Plug-and-play installation in most HIR2-equipped vehicles 💡 No Glare, Just Clarity – Designed for both projector and reflector headlamp units 🔋 Low Power Draw – 12V / 50W for efficiency and component safety ❄️ Reduced Eye Strain – Cooler, more natural light for night driving 📦 What’s in the Box? 2x HIR2 (9012) LED Bulbs (6000K Ice White) 2x 3000K Yellow Tint Films 2x 8000K Blue Tint Films(DIY application – change light temp in minutes) ⚠️ Fitment Notes: These bulbs have a built-in heat sink and driver unit. Some headlamp housings may have limited space. If unsure, contact us first. May trigger a dashboard warning on some vehicles due to low power draw – harmless and covered in our FAQ. ✅ Compatible With: Vehicles requiring HIR2 / 9012 dip beam bulbs Suitable for both reflector and projector headlamps Great for popular platforms including Ford, Vauxhall, and GM (check your specific model) 🛡️ Warranty: Includes 12-month CEUK warranty as standard(Keep packaging for any extended warranty claims if listed on the box) 🚗 Brighten your drive and customise your beam – all in one powerful package.🔧 The #Enhanced Edition HIR2 LED is more than a bulb. It's a full lighting experience.

Read more less

Introducing Demon Beam™ – The Ultimate LED Performance & Style Combo The CEUK Demon Beam™ is the most versatile LED headlight/fog unit we’ve ever produced. Designed for drivers who demand both cutting-edge performance and striking aesthetics, this unique 2-in-1 system delivers crystal-clear 6000K white light for visibility and RGB Demon Eyes for bold styling – all controlled from your smartphone. 🔥 2 Modes, 1 Unit: 1️⃣ 6000K Ultra Bright Beam Use as a dipped beam or fog light Powerful COB LED chip Emits a clean, focused ice-white output 6000 lumens per bulb / 12,000 per pair 2️⃣ Bluetooth-Controlled RGB Demon Eyes 144 solid colour options 20 dynamic colour modes Syncs with music or voice input Controlled via smartphone app (iOS & Android) Uses premium 5050 RGB LED chips 📦 What’s in the Box? 2x Demon Beam LED Units (H7, H8/11 fitment) 1x Fully Sealed Bluetooth Receiver 1x Fused Waterproof Wiring Loom Fitting Kit + Instructions ⚙️ Tech Specs: 6000K COB LED (white beam) 5050 RGB LED (demon eyes) 30W per bulb | 60W per pair 12V system compatible IP68 Waterproof – Rated for submersion up to 13ft No tape required – All connections are fully sealed 🚗 Fitment Notes: H7 May require a LED Clip sold seperately. H8/11 units fit MK8/8.5 fogs with no issues Some vehicles may require LED clips – check before purchase Due to the built-in rear heatsink, these units may not fit all housings May trigger dash warnings on certain vehicles – see FAQ for solutions ✅ If unsure about compatibility, please contact us directly via Facebook or website prior to ordering. 🛡️ Warranty: Includes a 12-month standard CEUK warranty(Keep packaging if a longer warranty is stated) 🎯 Demon Beam™ isn’t just an upgrade – it’s a statement.💡 See the road. Show your style. Stay #Enhanced.

Read more less

CEUK #Enhanced Illuminated Door Sill Protectors – Ford Performance Edition Add a premium touch to your vehicle’s entryway with our #Enhanced Illuminated Door Sill Protectors, designed exclusively for Ford Performance enthusiasts. With a sleek black brushed stainless steel finish and crisp white illumination, these sills combine form and function for the perfect first impression. ✨ Key Features: 🖤 Black Brushed Stainless Steel – Improved durability and premium aesthetic 💡 Illuminated 'Ford Performance' Logo – Crisp white & Red glow when doors open 🔋 Wireless V2 Version – Easy installation, no wiring needed 📐 Size: 47cm (L) x 5cm (W) x 1cm (H) – Perfect fit for most Ford door sills 🔧 Plug & Play Setup – No cutting or wiring required 📦 What’s in the Box? 2x Illuminated Door Sill Protectors (Wireless V2) 2x CR2032 Batteries 1x Fitting Kit (Adhesive + Instructions) 🛡️ Warranty: Comes with a 12-month CEUK guarantee(If longer warranty is shown on packaging, retain it for future claims) 💬 Why Choose CEUK?We’re dedicated to delivering products that truly #Enhance your vehicle, and this upgrade does exactly that – combining aesthetics, simplicity, and functionality in one bold step. 🚘 Style your entry. Light up your mod game. Go #Enhanced.

Read more less

CEUK Enhanced Edition H15 LED DRL & Main Beam UpgradePower, Precision, and Pure White Light – All in One Unit Unlock the full potential of your headlights with the Enhanced Edition H15 LED Upgrade – a true game-changer for vehicles running dual-function DRL and main beam H15 bulbs. Powered by advanced COB LED technology, these bulbs deliver a sharp, ice-white output between 5000K and 6000K, far surpassing any halogen alternative in both brightness and efficiency. Whether you're using them as Daytime Running Lights or high beams, expect superior performance, lower power consumption, and a dramatic boost in visibility. 🔧 Key Specifications: 🔌 Bulb Type: H15 💡 Light Output:• 36W DRL Mode• 50W Main Beam Mode ❄️ Colour Temperature: 5000K–6000K (Ice White) ⚡ LED Tech: COB (Chip-on-Board) for high output, low heat This item is also known as: Standard Trade Ref Base Type H15 715 PGJ23t-1 📦 What’s in the Box: 2x H15 LED Bulb Upgrades (DRL/Main Beam combo) ⚠️ Compatibility & Fitment: Suitable for vehicles requiring H15 bulbs with combined DRL and high beam functionality Fitment can vary depending on trim levels (e.g., Ford ST, VW GTi, etc.) – please verify compatibility before purchase Installation of LED bulbs may trigger dashboard warnings in some vehicles due to reduced power draw – see our FAQ for solutions 🛡️ Warranty: Backed by a 12-month CEUK warranty(Retain packaging for extended warranty claims where applicable) 🎯 Upgrade once. See more. Be seen. #Enhanced.

Read more less

CEUK T5 BriteVue Vanity Mirror LED Bulb Upgrade – Ice White Finish for MK8 Fiesta Say goodbye to dull, yellow factory lights and hello to crisp, clean ice white illumination with our T5 BriteVue LED Vanity Mirror Bulbs, designed specifically for the MK8 Fiesta. Installed in the sun visor vanity mirrors, these small but powerful LEDs bring a modern, premium feel to your cabin. It’s one of those subtle upgrades that you didn’t know you needed – until you experience the difference. ✨ Product Features: 🔹 T5 Fitment – Direct replacement for sun visor vanity mirror bulbs ❄️ Ice White Output – Bright, clean, and modern light 🚗 Vehicle-Specific Fit – Designed for the MK8 Fiesta 💡 Perfect for Makeovers – Great visual upgrade for daily drives or show builds 🧠 Simple DIY Install – Plug-and-play replacement This item is also known as: Standard Trade Ref Base Type T5 Wedge T5 286 W1.2W 📦 What You Get: 1x Pair of T5 Ice White Vanity Mirror Bulbs 🔔 Note: One pair covers one sun visor. To complete both sides of the vehicle, you’ll need 2 pairs. ⚠️ Important Fitment Notes: These bulbs fit the MK8 Fiesta, but fitment may vary depending on trim level (e.g. ST-Line, Titanium, etc.) Some vehicles may display a dashboard warning when LEDs are installed – this is harmless and can be resolved via resistors or CANbus adapters if needed 🛡️ Warranty: Includes 12-month CEUK warranty(Keep packaging for claims on extended warranties if indicated) 💬 Brighten your drive, the #Enhanced way – one mirror at a time.

Read more less

#Enhanced Edition 501A LED Side Repeater BulbsTransform the look and performance of your side indicators with the #Enhanced 501A LED Mirror Indicator Bulbs from CEUK. Designed to complement our popular Enhanced Edition 581 Indicator Units, these bulbs deliver an intense amber flash while maintaining full CANBUS compatibility for 99% of vehicles. With 52 high-output LEDs per bulb, you’ll get up to 7x brighter visibility compared to standard halogen units—making your car safer, sharper, and unmistakably #Enhanced. 🔧 Key Features: 💡 501A fitment – Direct replacement for OEM side repeater bulbs 🔥 52 LEDs per bulb – Max brightness & all-round projection ✅ Canbus error-free – No dashboard warnings on most vehicles 🔋 Low power draw – Efficient & long-lasting 🔄 Compatible with Enhanced Edition 581 Indicator Systems 🧩 Plug-and-play installation – No modifications required This item is also known as: Standard Trade Ref Base Type 501 501 T10 W5W 📦 What’s in the Box: 2x 501A #Enhanced LED Side Repeater Bulbs 🛡️ Warranty: Backed by a 12-month CEUK guarantee. If a longer warranty is listed on the product packaging, please retain it as proof. 🔍 Fitment Notice: While these bulbs are designed for wide vehicle compatibility, some trims or special editions (e.g. Ford ST, VW GTi) may have unique lighting setups. Always double-check your existing fitment before ordering. 💬 If in doubt, message us — we’re happy to confirm compatibility. 🚦 Be seen. Be sharp. Be #Enhanced.

Read more less

Enhanced Edition 581 LED Indicator Bulbs – Ultra Bright, Hyper Flash Free Give your indicators the upgrade they deserve with our brand new Enhanced Edition 581 LED Indicator Bulbs. Engineered for brilliance, these bulbs are 30x brighter than standard halogen units, ensuring your vehicle is noticed in every condition. 🌟 Forget resistors, coding, or canbus issues—these come equipped with built-in resistors, eliminating hyper flashing and dashboard errors on 99% of vehicles. Simply plug and play, and you're good to go. ⚙️ Key Specs: 🔌 Power: 12v 🔶 Colour: Intense Amber 💡 Bulb Type: 581 / PY21W / Offset Pin 🔋 LED Count: 30x High-Powered SMD LEDs 🛡️ Canbus Safe: Yes – Built-in Resistors 📦 Sold As: 1x Pair (Add Quantity 2 for 4 bulbs) 🕒 Install Time: ~5 Minutes This item is also known as: Standard Trade Ref Base Type 581 PY21w / 7507 BAU15s ✅ What's in the Box: 2x 581 Enhanced Edition LED Indicator Bulbs 12-Month CEUK Warranty 🔧 Vehicle Compatibility & Notes: ✅ Universal 581 / PY21W Offset Fitment ⚠️ Always check your vehicle's bulb type prior to purchase 📘 Some vehicles (especially special editions like ST, GTi, etc.) may use different lighting setups – consult your manual or OEM specs to confirm. Note: Installing LED units may occasionally trigger a dashboard message. This is a harmless side effect and does not affect function. See our FAQ for easy solutions. 💥 Upgrade your visibility. Be seen. Be #Enhanced.

Read more less

Struggling to see when reversing? Get #Enhanced. Introducing the #Enhanced Edition 955 LED Reverse Light Upgrade – a game-changing lighting solution designed to maximize rear visibility in all conditions. This latest-generation bulb uses lower power consumption while delivering significantly higher lumen output, meaning a brighter, clearer view with no strain on your vehicle’s electrics. 💡 Key Features: Bulb Type: 955 Voltage: 12V Colour Output: Crisp 5000K Ice White LED Count: 34 SMDs per bulb 32 side-firing LEDs for wide spread 2 forward-facing projection LEDs for focused throw Energy Efficient: Low power usage, high brightness Plug & Play: Easy install – no modifications required Sold as a Pair This item is also known as: Standard Trade Ref Base Type 955 921 W16W T15 📦 What’s in the Box? 2x 955 Enhanced Edition LED Units 🛠️ Vehicle Compatibility: Please check your vehicle’s bulb type before ordering. Some vehicles, including special editions (e.g., Ford ST or VW GTi), may use different fitments. 💡 Note: Installation of LEDs may occasionally trigger a dashboard warning on certain vehicles. This is harmless and explained further in our FAQ section. 🛡️ Warranty Info: Standard 12-Month Warranty included. If your product packaging states a longer warranty, you must retain the packaging for that coverage to be valid. 🎥 Fitting Video Available – Watch how simple it is to install!

Read more less

All the Colours of the Rainbow – At Once! Turn heads with the CEUK Chaser Grille Kit, the ultimate #Enhanced upgrade for your vehicle's front end. Based on the wildly popular Chaser Halo system, this grille-mounted LED kit gives your vehicle a bold, custom appearance with multi-colour RGB lighting, animated modes, and music sync – all controlled directly from your smartphone. 🎯 Key Features: Multi-Zone RGB Output: Over 16 million colours and 200+ dynamic modes Bluetooth Controlled: Fully adjustable via smartphone app Self-Powered: Connects directly to your vehicle’s battery Plug & Play Design: No complex wiring or modification required Universal Fit: Ideal for any car with a front grille Strong Output: Far brighter than standard grille lighting kits 📦 What’s in the Box? 2x RGB LED Light Strips (60cm each) 1x Bluetooth Control Receiver 1x Power Loom with Inline 3A Fuse 1x Fitting Kit (Clips & Essentials) 🛠️ Installation Info: The kit is easy to install and draws power directly from your car’s battery. You’ll receive adhesive clips for mounting the LED strips behind your grille. For a more permanent fit, strong automotive adhesive (e.g., Tiger Seal – not included) is recommended. Control everything from your phone – including solid colours, chasing effects, and music-synced lighting. 🔧 Compatibility: Universal fitment – ideal for most makes and models with front grille access Not vehicle-specific – ensure enough space for 60cm strips behind your grille 🛡️ Warranty: Comes with a 12-month guarantee as standard. If your product packaging offers more than 12 months’ warranty, please retain the packaging for any warranty claims.

Read more less

Why have one colour when you can have them all? Introducing the CEUK Enhanced Edition RGB Glove Box & Footwell Lighting Kit – the ultimate plug & play ambient lighting upgrade. This stylish, Bluetooth-controlled kit allows you to select from 144+ solid colours and multiple dynamic modes to completely transform your car's interior vibe. Whether you're looking for a subtle glow or a vibrant light show, this upgrade has you covered. 🎯 Key Features: RGB LED Lighting: Choose from over 144 static colours Dynamic Modes: Colour chasing, fading, flashing & music-reactive modes Bluetooth App Control: Control lighting with your smartphone Ultra-Bright 5050 LED Strip Tech Plug & Play Installation: No cutting, splicing, or soldering required Fully Reversible 📦 What’s in the Box? 1x Bluetooth Receiver 1x Plug & Play Power Wiring Loom 1–3x RGB LED Strips (based on your kit selection) 1x Fitting Kit 1x Instruction Manual Available in three options: Glovebox only, Footwell only, or Full Combo Kit. 🛠️ Installation: Designed for simplicity, this kit installs in under 10 minutes using CEUK's proven plug & play technology. No tools, no fuss – just plug it in, stick the LEDs where you want them, and you're done. Control everything from your phone via our user-friendly app. Perfect for adding a subtle enhancement or going full show mode! 🛡️ Warranty: Includes a 12-month standard warranty. If the product packaging indicates a longer period, you must retain the packaging for warranty purposes. 🚗 Vehicle Fitment: Compatible with most modern vehicles.Note: Vehicle variants (such as Ford ST/GTi models) may have different setups. Please confirm bulb fitment or reach out before purchase.

Read more less

Tired of struggling to see in your boot? We’ve got your fix. If you’ve ever been frustrated by the pathetically dim single boot light in your car, you’re not alone. That's why we developed the CEUK Enhanced Boot Light Upgrade Kit – a simple plug-and-play solution that massively increases visibility in your vehicle's boot space. 💡 Key Features: Dual-panel SMD LED upgrade Plug & Play: Zero hard wiring or splicing Fits both 501 and Festoon boot light sockets Easy 5-minute installation Choice of 6 vibrant colours OEM-style connectors for a factory look 🧰 What’s In the Box? 1x 501 Adapter 1x Festoon Adapter 2x High-power SMD LED Panels (Choose your colour) 1x Custom Extension Wiring Loom 1x Instruction Manual This item is also known as: Standard Trade Ref Base Type 501 501 T10 W5W 🔧 Fitting & Compatibility: Fits any vehicle with a 501 or Festoon boot light socket – including hatchbacks, estates, and SUVs.Simply remove your existing boot bulb, plug in the adapter and panel(s), and mount in desired locations using the pre-fitted adhesive backing. No cutting, soldering, or guesswork – fully reversible and DIY-friendly. Tools needed: Just a small flat-head screwdriver. 🛡️ Warranty: Wiring Loom: Lifetime Guarantee LED Panels: 12-Month WarrantyRetain original packaging if extended warranty is stated. 🚗 Vehicle Fitment: This kit is designed to be universal, but some vehicles (e.g. Ford ST, VW GTi) may have non-standard boot fittings.If unsure, check your socket type or reach out before ordering. Note: LED installation may trigger a harmless dashboard warning in some cars. See our FAQ for more info.

Read more less

#Enhanced Edition H7 LED Retaining Clips – Pair Designed exclusively for CEUK #Enhanced Edition H7 LED bulbs, these butterfly-style clips provide a perfect, secure fit for headlights with twist-lock holders. Most generic clips on the market are too large or incorrectly shaped – which can cause misalignment, flickering, or even total LED failure. These CEUK-designed clips eliminate that risk by offering exact compatibility with our H7 LEDs. ⚙️ Key Features: Custom-designed for #Enhanced H7 LED bulbs Compatible with twist-lock headlight systems Prevents movement or dislodging of LED units Perfect shape and tension – unlike oversized generic clips Sold as a pair (1 pair = 2 clips) 📦 What’s Included: 2x H7 LED Retaining Clips (Butterfly Style) This item is also known as: Standard Trade Ref Base Type H7 477 PX26d 🚗 Vehicle Fitment Note: Vehicle bulb holders can vary depending on trim level or edition.For example, Ford “ST” or VW “GTi” models may differ from standard models. Please confirm compatibility by checking your original headlight assembly before purchasing.

Read more less

Full Product Description IllumiNite 9005 / HB3 Ice White Upgrade – See the Road in a New Light Upgrade your visibility and style with the IllumiNite 9005 / HB3 Halogen Bulb Upgrade, delivering a 6000K pure white light that not only looks modern but also offers improved road clarity. These bulbs are a plug-and-play direct replacement for standard 9005 / HB3 bulbs and can also be used in place of 9006 / HB4 bulbs where compatible. Whether you're upgrading your dipped beam, main beam, or fog lights, these are a simple, effective enhancement. 🔧 Key Features: Crisp 6000K Ice White light output Plug & Play – No rewiring needed OEM-fit design for direct halogen replacement Enhanced visibility and clean white aesthetics Multi-purpose use: dipped beam, main beam, or fog lights Ideal for reflector and projector housings Sold as a pair This item is also known as: Standard Trade Ref Base Type HB3 9005 P20d 🛡️ Warranty: Covered by a 12-month warranty as standard. If your packaging states a longer warranty, please keep the packaging as proof. 🚗 Vehicle Fitment Notice: Fitment may vary by vehicle trim or edition. Please confirm bulb type before ordering, especially for vehicles like Ford ST or VW GTi models that may have non-standard lighting units. Make the switch. Upgrade your drive. Get #Enhanced with IllumiNite.

Read more less

IllumiNite HB4 / 9006 Ice White Halogen Upgrade – Modern Light, OEM Fit Step up your vehicle lighting with the IllumiNite HB4 / 9006 Halogen Upgrade, engineered to deliver a crisp 6000K ice white light that offers superior visibility and a premium look—without the need for complicated wiring or aftermarket conversions. A direct plug-and-play replacement for any standard 9006 / HB4 bulb, these upgrades are ideal for dipped beam, main beam, or fog light applications. With improved clarity and road coverage, your nighttime driving experience will never be the same. 🔧 Key Features: 6000K Ice White output – sleek and modern Plug & Play installation – no modification required Direct OEM 9006 / HB4 bulb replacement Improved visibility with minimal power draw Compatible with reflector or projector housings Ideal for dipped, main, or fog light use Sold as a pair This item is also known as: Standard Trade Ref Base Type HB4 9006 P22d 🛡️ Warranty: Comes with a 12-month warranty as standard. If your product packaging states a longer warranty, please retain it as proof of extended coverage. 🚗 Fitment Notice: Some trims or special edition vehicles (e.g. Ford ST, VW GTi) may have non-standard bulb types. Please double-check your fitment before ordering to ensure compatibility. Upgrade to IllumiNite and see the road ahead in brilliant white clarity. Get #Enhanced.

Read more less

Enhanced Edition H7 HID Kit – Power Meets Precision Experience a dramatic improvement in visibility and style with the Enhanced Edition H7 HID Kit. Designed to outperform standard halogens, this 35W HID system delivers superior light output, low power consumption, and quick-start technology for immediate performance. Whether you're navigating dark country roads or just upgrading your aesthetic, this kit offers a clean, crisp beam with optional colour temperatures to suit your style. For optimal clarity and performance, we recommend selecting between 4500K and 6000K. Higher Kelvin options produce a bluer hue but can reduce visibility. 🔧 Key Features: 35W low power consumption Fast ignition with Quick Start Technology Plug-and-play compatibility* Choice of colour temperature: from bright white to striking blue Crisp, focused beam pattern for safer night driving *Please note: Some vehicles may require an HID clip for correct fitment. This is sold separately. 📦 What’s in the Box? 2x HID Ballasts 2x H7 HID Bulbs (your selected colour temp) Wiring & Connectors Installation Guide This item is also known as: Standard Trade Ref Base Type H7 477 PX26d ⚠️ Vehicle Compatibility: Some vehicles (e.g. Ford ST, VW GTi) may use different fitments depending on trim level. Please check bulb type before ordering. 🛡️ Warranty: 12-month warranty as standard. If your packaging states a longer warranty, please retain it to claim extended coverage.

Read more less

#Enhanced Illuminated Sill Protectors – RS Spec Edition Add a premium touch to your vehicle’s entry with the Enhanced Illuminated Sill Protectors – RS Spec, now featuring our upgraded black brushed stainless steel finish for superior durability and a sleek look. This kit combines stunning ultra-bright blue LED illumination with enhanced interior lighting to transform the look and feel of your car's interior – all while protecting your sills from wear and tear. 💡 What’s Included in the Kit? 2x Illuminated Door Sill Protectors (RS Spec Design – Blue LED) 2x BriteVue™ 36SMD Footwell Light Panels (same colour as sill protector) 2x Dual-output Wiring Looms (Footwell + Kick Plate adapters) 🔌 Simple Plug & Play Installation No cutting or splicing required! Simply: Unplug your existing footwell bulb or LED. Plug in our CEUK splitter loom. Peel and stick the adhesive backing on both sill protector and footwell panel. Secure in place – done in under 3 minutes per side. 📐 Dimensions: Length: 54cm Depth: 5cm Height: 1cm 🔧 Why Choose CEUK? We design and engineer our #Enhanced products with quality, durability, and user-friendliness in mind. With genuine plug-and-play setups and premium materials, we aim to #Enhance your vehicle without compromise. 🛡️ Warranty Information 12-month standard warranty included. For extended warranty coverage, retain product packaging if stated.

Read more less

Enhanced Permanent Footwell Light Kit – Universal Fit “Your footwell lights are so bright—but I want them on while I drive!”We heard you loud and clear. Introducing the Enhanced Permanent Footwell Kit—designed for all vehicles, regardless of whether you already have OEM footwell lights. 💡 Why You’ll Love It: Ultra-bright 12SMD LED panels deliver vibrant ambient lighting while you drive Fully independent system—OEM lights remain unaffected Plug & Play installation in under 10 minutes No OEM footwell lights? No problem! This kit works on any vehicle 🔌 How It Works: The kit uses a piggyback fuse system to draw power from an ignition-live fuse. When the engine starts, the LEDs turn on. Turn off the car, and the lights shut off automatically—no switches or splicing needed. 📦 What’s in the Kit: 1x Plug-and-Play Wiring Loom 1x 3A Fuse 1x Fuse Holder (or all 3 options, if selected) 2x 12SMD Footwell LED Panels (in your chosen colour) Installation instructions with clear step-by-step photos 🔐 Built for Safety: Fully fused and surge protected CEUK in-house quality control Safe for use on all vehicle electrical systems 🎨 Available Colours: Choose from a range of bold and vivid colours to match your style or existing interior mods. 🛡️ Warranty Information: This kit includes a 12-month warranty as standard. For any extended warranty mentioned on packaging, retain it for validation. ⚠️ Vehicle Compatibility: Universal fit. However, some special edition vehicles (e.g., Ford ST, VW GTI) may have unique light units. Always check fitment or contact us before ordering.Installation of aftermarket LEDs may trigger harmless dashboard alerts—please consult our FAQ if needed.

Read more less

Enhanced Rear Footwell Add-On Kit – For Existing CEUK 36SMD Users Only ⚠️ IMPORTANT: PLEASE READ BEFORE ORDERING!This kit is for rear footwell lighting only and is intended only for customers who already have our 36SMD front footwell upgrade. If you purchased standard footwell bulbs and not the 36SMD panels, this kit is not compatible. 🔥 Upgrade Your Rear Footwells Take your vehicle interior to the next level with ultra-bright rear footwell panels. This add-on behaves exactly like your OEM footwells—only brighter and more vibrant. Simply plug into your existing setup with our vehicle-specific rear wiring loom and adapter (if required). Available in 6 bold colour options to match or complement your current front footwell lights. 📦 What’s in the Box? 2x Ultra Bright Rear Footwell LED Panels (your chosen colour) 2x Vehicle-Specific Rear Wiring Loom 2x Vehicle-Specific Adapter (if applicable) ⚙️ Fitment Requirements Your vehicle must already have OEM footwells installed You must already be using CEUK 36SMD Front Panels Not compatible with basic LED bulb upgrades If your vehicle is not listed, please contact us to confirm compatibility 🛠️ Why Choose CEUK? 100% Plug & Play – No splicing or soldering Fully fused and surge protected Brighter than OEM lighting Custom-fit for your exact make & model 🛡️ Warranty Info Includes 12-month warranty as standard. For extended warranties stated on packaging, you must retain the original packaging as proof. ⚠️ Compatibility Note Some models (e.g., Ford ST, VW GTI) may have different wiring setups. Always confirm fitment before purchase. LED upgrades may trigger harmless dashboard error messages in some vehicles. See our FAQ for more info.

Read more less

IllumiNite D3S Bi-Xenon Replacement Bulb Upgrade – 6000K Ice White Upgrade your lighting with the IllumiNite D3S Bi-Xenon bulbs – a direct plug-and-play replacement offering up to 50% more brightness than standard OEM units. Designed to enhance night-time visibility while maintaining safe, non-glare output for oncoming traffic, these bulbs are the perfect upgrade for any vehicle using D3S fitment. Engineered to work seamlessly with self-levelling projector headlights, these high-performance bulbs deliver a crisp 6000K white light and improved road coverage without compromising your factory housing or lens. Whether you're upgrading for safety, performance, or aesthetics, IllumiNite delivers consistent, high-quality light output — every time. 🔧 Technical Specifications: Fitment: D3S Voltage: 12V Power: 35W Colour Temperature: 6000K Ice White Technology: Xenon / HID Compatibility: Suitable for Projector Headlights (won’t damage lenses) This item is also known as: Standard Trade Ref Base Type D3S 66340 / 42403 PK32d-5 📦 What’s in the Box? 2x IllumiNite D3S Bi-Xenon Bulbs 🛡️ Warranty & Returns 12-Month Warranty as standard 🚗 Vehicle Fitment Notice: Some vehicle trims or special editions (e.g., Ford ST, VW GTI) may use different light units than the standard model. Please check your existing bulb type before ordering to ensure correct fitment.

Read more less