Performance - Ford Focus MK2 (2004-2010)

Performance silicone hose kit for the Ford Focus RS Mk2 2.5. Hose kit includes 4 top hoses. These are the most visible hoses on the vehicle and the kit contains 2 airbox hoses, 1 acoustic hose and 1 throttlebody hose. If you buy the boost induction kit, these 4 hoses are included. Black Blue Red Orange Green White Yellow Pink Purple RS Green Stealth Grey Nitrous Blue   Add some colour to your engine bay

Read more less

Performance silicone dump valve fitting hose for the Ford Focus RS and ST Mk2. Hose kit includes 1 turbo hose. Black Blue Red Orange Green White Yellow Pink Purple RS Green Stealth Grey Nitrous Blue   Add some colour to your engine bay

Read more less

Performance silicone hose kit for the Ford Focus ST Mk2 225. Hose kit includes 4 ancillary hoses. Black Blue Red Orange Green White Yellow Pink Purple RS Green Stealth Grey Nitrous Blue   Add some colour to your engine bay

Read more less

Performance silicone hose kit for the Ford Focus ST Mk2 225. Hose kit includes 5 coolant hoses. Black Blue Red Orange Green White Yellow Pink Purple RS Green Stealth Grey Nitrous Blue   Add some colour to your engine bay

Read more less

Performance silicone hose kit for the Ford Focus ST Mk2 225. Hose kit includes 5 boost and induction hoses. Machined part incorporated into the hose to enable direct repacement of sensor. High temp (nomex) fabric used on turbo hoses. Multiple colours with CEUK logo branding (White with black outline)

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

This listing is for 1x 5L Barrel OR 1x 1L Bottle   A fully synthetic Triple Ester NANODRIVE Technology low friction formulation suitable for fast road/street modified engines, race, rally, sprints and hill climbs. Part of the Competition Fully Synthetic NT+ range of engine oils and incorporates Millers Oils second generation NANODRIVE low friction technology to achieve winning results for the professional race team. APPLICATION: Recommended for competition or modified engines where maximum power release is the preferred criteria. Formulated for high revving engines used in circuit racing or for larger engines for short duration i.e. hill climbs and sprints. USER BENEFITS: Fully synthetic Triple Ester NANODRIVE Technology oil provides: Significantly reduced friction (laboratory tests and results show up to 60% friction reduction plus a reduction in wear to a standard engine oil) Reduces component wear promoting longer engine life Reduced heat production Increased power output and torque Improved reliability Improved energy efficiency Superior anti-friction and anti-wear characteristics PERFORMANCE PROFILE: Manufactured to far exceed the requirements of API SM/CF and ACEA A3/B4 Suitable for operating at 125°C with peak temperatures up to 150°C

Read more less

A replacement turbo actuator for the MK2 Ford Focus RS. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACFRS2 Actuator1 x Forge Sticker This actuator is built with a yellow coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less

The Forge UNOS boost controller is a ball and spring CNC machined to aircraft grade specifications and incorporates a ratchet type top adjuster that will allow for the positive and precise adjustment that your driving style demands. The controller can be dash or engine bay mounted to suit your preference. This product is a universal component, and as such, no vehicle-specific fitting instructions can be provided. This product is designed and built with the intent of increasing the boost output of any forced induction system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Forge Motorsport nor any of it’s Authorized Distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment.   In The Box:1 x FMUNOS Boost Controller1 x Uprated Unos Spring2 x Unos Brackets2 x M4 x 8 Socket Cap Bolts1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased ‘Working Ratio’ over the factory equipment resulting in improved boost response throughout the RPM range. This Improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm and revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.  Upgrading with the same base pressure as the factory, you can expect a broader boost and torque curve through peak boost being achieved earlier in the RPM and being held longer into higher RPM. These improvements can be amplified with higher base pressures. However, tuning and recalibration are likely required. FEATURESProprietary Silicon Nomex DiaphragmChoice of Springs from 3psi to 26psi (Optional)High-Grade Billet Aluminum ConstructionStainless Steel Rods and ClevisTurbosmart Unique Locking Collar System SUITABLE FORThis is a bolt-on fitment for the K04 turbocharger fitted to the 2.5L DOHC Turbocharger 5 Cylinder motor in the Ford Focus RS. (Excludes Focus ST / XR5, refer: TS-0622-2072)

Read more less

Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased ‘Working Ratio’ over the factory equipment resulting in improved boost response throughout the RPM range. This Improved ‘working ratio’ is achieved through an increase to the effective surface area of the diaphragm and revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive.  Upgrading with the same base pressure as the factory, you can expect a broader boost and torque curve through peak boost being achieved earlier in the RPM and being held longer into higher RPM. These improvements can be amplified with higher base pressures. However, tuning and recalibration are likely required. FeaturesProprietary Silicon Nomex DiaphragmChoice of Springs from 3psi to 26psi (Optional)High-Grade Billet Aluminum ConstructionStainless Steel Rods and ClevisTurbosmart Unique Locking Collar System

Read more less

Turbosmart’s triple gauge L-bracket is a perfect way to mount up to three Turbosmart 52mm gauges. Constructed from powder-coated solid steel, this bracket offers superior durability and stability for your gauges. With its easy installation and secure mounting, the Turbosmart Triple Gauge L-Bracket ensures reliable readings and can be used for various vehicles. The Turbosmart L-Bracket is the ultimate choice for keeping your gauges secure and accurate. So if you’re looking for a reliable mounting solution for three 52mm Turbosmart gauges, look no further than Turbosmart’s triple gauge L-bracket. It’s the perfect way to make sure your gauges stay securely in place. Get yours today!  

Read more less

Direct replacement crossover pipe for Ford Focus ST 225 This pipe maintains a consistent diameter throughout allowing for increased airflow over the standard equipment. The pipe is made from lightweight aluminium, fully TIG welded, with laser cut brackets. The pipe is finished in a textured black powder coat for an OEM plus look.

Read more less

Genuine Ford/Castrol Magnatec Professional 5W20 Fully Synthetic Oil 5L For Ford EcoBoost engines which requires oil that meets SAE 5W-20; WSS-M2C948-B specifications. Used on servicing for the Focus & Fiesta Range

Read more less

NB Styling Bonnet strut Kit for the Ford Focus mk2 (2005-2011). The NB Styling Bonnet strut kit complete the look of any Mk2 Focus, from the humble base model to the heavily modified Focus RS  Bonnet Strut Kits available in Standard BLACK Why Buy this Bonnet strut kit? First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop. Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car. Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed. “No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for. Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car” Our kit requires only a 10mm & 13mm spanner and a small screwdriver to fit. The Standard Kit contains… Steel Brackets ( Zinc coated then Powder coated Black)2 x Pressurised struts (Black)And all new stainless steel washers and boltsOnline Fitting Instructions link

Read more less

ST Turbo & Mk2 Facelift Under bonnet plates 14 piece ‘Fits 08 onwards’ This 14-piece under bonnet kit is a real finishing touch to any ST show car. Looks amazing when fitted! Under bonnet plate adhesive available , please choose from options list if needed

Read more less

Bailey Pro-Series Satin Black Water header tank cap cover with HOT! logo, fits over top of Original Blue Bailey cap. Grooved inside for perfect fit! Made from solid billet alloy, with engraved HOT! logo. Available in two finishes: Polished Finish Pro-Series Black, the engraved HOT! logo shows up in original alloy colour Will Only Fit Original Blue Bailey header caps & AIRTEC header tanks fitted with Blue cap

Read more less

Focus ST/RS Turbo Oil filler cap. Only available in a polished finish. Machined to look like the original but better, made from quality alloy and polished to perfection. This is a replacement part not a cover. Fits all 20v turbo engines, RS & ST models

Read more less

Pro-Series Satin Black round washer bottle stopper with washer logo,'o' ring securing system. Grooved inside for pefect fit! Made from solid billet alloy. Totally original finish, anodised satin black alloy and engraved logo which show up in silver

Read more less

Large round washer stopper with washer logo Has double ‘O’ ring securing systemTo fit Mk2 Focus, Mk6/7 Fiesta.To fit, remove old washer cap and simply push new polished washer stopper in place.Please note these are made from cnc billet alloy and polished to a mirror finish.

Read more less

ST Camshaft cover recess cover with 20v Turbo logo Mirror finish polished Alloy, machined to to fit. Takes seconds to fit and finishes off Camshaft cover a treat!

Read more less

Fits over top of Original ford Header tank cap with a perfect fit. Anodised satin black alloy and engraved logo which show up in silver. Part no: ASCAPFO10 TECHNICAL DATA Pro-Series Satin Black Water header tank cap cover with HOT! logo, fits over top of Original ford Header tank cap. Grooved inside for perfect fit! Made from solid billet alloy. Totally original finish, anodised satin black alloy and engraved logo which show up in silver Part no: ASCAPFO10

Read more less