Performance - Ford Focus MK2 (2004-2010)

Performance silicone dump valve fitting hose for the Ford Focus RS and ST Mk2. Hose kit includes 1 turbo hose. Black Blue Red Orange Green White Yellow Pink Purple RS Green Stealth Grey Nitrous Blue   Add some colour to your engine bay

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less

Turbosmart’s triple gauge L-bracket is a perfect way to mount up to three Turbosmart 52mm gauges. Constructed from powder-coated solid steel, this bracket offers superior durability and stability for your gauges. With its easy installation and secure mounting, the Turbosmart Triple Gauge L-Bracket ensures reliable readings and can be used for various vehicles. The Turbosmart L-Bracket is the ultimate choice for keeping your gauges secure and accurate. So if you’re looking for a reliable mounting solution for three 52mm Turbosmart gauges, look no further than Turbosmart’s triple gauge L-bracket. It’s the perfect way to make sure your gauges stay securely in place. Get yours today!  

Read more less

Kompact Valve from Turbsomart was developed to take the Motorsport-Proven 28mm, Postiive Sealing Piston Valve Technology and adapt it to the smaller footprint of the compressor cover mounted  bypass valves as found on common Borgwarner EFR and KKK Turbochargers as well as many Ford Ecoboost Engines. The Kompact Valve is a bolt-on, direct repalcement for the factory and OE plastic diverter valves that use un-enforced diahgrams and are known to crack under increased boost and develop age, heat and cycle related boost leaks ovet time. The Kompact Valve provides increased boost response and higher boost handling with the long term durability of a billet alluminium body and positive sealing piston along with our boost-balance technology which means the more boost you feed these valves, the better they seal – It literally is that simple. Avaialble in Dual Port / Vent to Atmosphere: TS-0203-1061 Plumb Back / Recirculating: TS-0203-1261 Features Boost-Balance Technology 28mm Positive Seal Piston Over 600HP Flow Potential Suitable for Standard and Modified Engines Billet Construction with High-Temperature O-rings SUITABLE FOR Borg Warner EFR Turbo Series Ford Falcon FG EcoBoost 2.0 Ford F150 3.5 EcoBoost 2011-2012 Ford Focus MK1 RS 2002-2003 Ford Focus MK2 XR5/ST/RS 2.5 5 Cylinder Ford Focus MK3 1.5 EcoBoost Ford Focus MK3 1.6 EcoBoost Ford Focus MK3 ST 2.0 EcoBoost Opel Corsa D OPC 2006-2014 Porsche 911 GT2 (997) Porsche 911 Turbo (997) Vauxhal Corsa D VXR 2006-2014 Volvo C30 T5 Volvo C70 T5 Volvo S40 T5 Volvo S60 T5 Volvo V50 T5 Volvo V70 T5

Read more less

IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. We’ve taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator. Features:– Silicone diaphragm with Nomex reinforcement to withstand high temperatures.– High grade, billet aluminium construction.– Stainless steel rods and connecting clevis for corrosion resistance.– Locking Collar design cap allows for quick spring changes (Options from 3psi to 26psi available).– AIRTEC Branded product Ideal for use with any Turbosmart boost controller. Please note: Pictures are library pictures and may not relate to actual product. AIRTEC part no: TS-0941-1010

Read more less

A remote Blow off, or Dump Valve Kit for the Ford Focus Mk2 ST225. This uses a twin piston valve to ensure compatibility with the engine management system and a custom silicone hose to ensure easy installation. This valve can be installed in combination with the OEM valve, or on it's own by using one of our blanking plates. The hose is available in red, blue, or black, and the valve is available in black. Please select your choice from the options above.   In The Box:1 x FMFOCSTDV Valve1 x 35mm Hose Clamp1 x 50mm Hose Clamp1 x 500mm of 4mm Vacuum Tube1 x 5mm T Piece1 x Silicon Hose #10221 x Instructions1 x Forge Sticker

Read more less

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm valves (OEM) but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation the top or vacuum connection is angled. This part first the Ford Focus ST225 and ST250   In The Box:1 x FMDVK04S Valve1 x Uprated Yellow Spring1 x Forge Sticker

Read more less