Performance - Renault Clio MK4 200, 220 & RS (2012-2019)

This Recirculation or Diverter valve kit is specifically designed for the Renault Clio 1.6 200THP/220 Trophy   In The Box:1 x FMDVC200R Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring3 x Cable Tie1 x 1000mm of 4mm Vacuum Tube4 x 35mm Hose Clamps1 x Silicon Hose #14591 x Silicon Hose #14581 x Vacuum Tap1 x M5 x 35 Self Tapper Screw1 x Blanking Plug1 x 2.5mm Allen key1 x Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.   Click here to see our video on how to service this valve   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow off or Dump valve kit is specifically designed for the Renault Clio 1.6 200THP/220 Trophy   In The Box:1 x FMDVC200A Valve3 x Cable Ties1 x 1000mm of 4mm Vacuum Tube4 x 35mm Hose Clamps1 x Straight Silicone Hose (25mm x 65mm)1 x M5 x 35 Self Tapper Screw1 x 25mm Blanking Plug1 x Vacuum Tap1 x Silicon Hose #14591 x Blanking Plug1 x Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Turbo Actuator for Renault Clio 200RS and Nissan Juke 1.6 Turbo. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACTRCT Actuator1 x Forge Sticker This actuator is built with a yellow coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.

Read more less

Forge Motorsport are pleased to offer a Blow Off Valve (BOV) Adaptor for the Nissan Juke, Renault 1.2 litre Turbo engines and Smart Car ForTwo W453 Turbocharger 0.9L 2016. fits: DaciaDuster1.2 TCE 2013 onwardsNissanJuke1.2Qashqai1.2 PetrolRenaultClioMk41.2 TCE 2012-MeganeMk31.2 TCEMk41.6 GTRS 280 (17-)RS 280 Cup (17-)RS 300 Trophy (18-)ScenicMk3TwingoTCE90 (2014-2019)SmartSmart Car ForTwo W453 Turbocharger 0.9L 2016 The spacers were developed to produce the great atmospheric BOV sound that is expected from your turbocharged vehicle, although normally lacking on your vehicle. This CNC machined spacer, made from solid billet aluminium, gives you that sound you have been looking for. When letting off the throttle you get that sweet and satisfying “whoosh” letting everyone know your vehicle is in fact turbocharged. It has been designed to work with the original electrically controlled solenoid (Electronic Valve Part No. 144839204R) and utilises high quality O-rings for a perfect seal. Your car is equipped from the factory with a recirculating style turbocharger valve which allows the charge air to be routed around the turbocharger from the boost side back to the intake side. The downside to this style of system is it recirculates the hot air back into the intake side of the turbo, increasing temperatures. When equipping a vehicle with a Blow Off Adaptor like ours, it helps remedy this issue. This great solution for open air venting includes everything you will need for the install.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This turbo recirculation valve is the result of of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. The FMDV008PA version seen here has the benefit of a 90 degree vacuum port, that can be rotated to three different orientations. This is often the preference where either space is restricted, or the original fitment valve has a 90 degree connection, either on the valve or connecting hose. Forge's recirculation valve features a greater flow rate than the OEM Bosch Valve, as well as a faster response time, due to our revised design. By using the associated service kit (FMDVSK), as seen below, the life of the valve can be extended, and the performance can be maintained. With a lifetime guarantee, you can be sure the valve is reliable for your car.  It is fully customisable to fit your application with two uprated springs provided in the kit. Forge Motorsport's improvement on the original valve has a compact design, meaning easy fitment under the engine cover. Please select whether you want a black or matt silver valve, using the options above. In The Box:1 x FMDV008PA Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring1 x Cable Tie1 x 2.5mm Allen key2 x 35mm Hose Clamps1 x Instruction Booklet1 x Forge Sticker FITS: AudiA31.8TA41.8T (B5,B6 Models)A61.8T (B5,B6 Models)Allroad 2.7Bi-TurboS31.8T (8L Chassis)TTMk1NissanMicraIG-T 90 TeknaPorscheCayman 718 SGTS 2.5 TurboRenaultClioMk40.9 TCE 2012-SeatLeonMk1 1998-2005Cupra 1.8TCupra R 1.8TSkodaOctavia1.8TVolkswagenBeetle1.8TBora (1998-2005)GolfMK41.8TPassat1.8TPolo1.8T *Porsche 991/911 Turbo will require 2 Valves - please see our seperate product (FMDV008P2 below)* The valve has a port size of 25mm If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less