Performance - Seat Ibiza MK4 (6J) 2008-2017

The highest-performing, race-bred cold-air induction systems for the Polo GTI 1.8 and Ibiza Cupra 1.8 WHAT'S SO SPECIAL? One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for the latest 6C Polo GTI 1.8 and Ibiza Cupra 1.8. ​ Our giant high-flow filter construction is simply the best filtration material on the market, and is the key to the power gains achieved.  Each filter is handmade in the UK.   Developed for use in our Volkswagen Racing cars, the system delivers really impressive airflow gains - as much as 9% higher at peak power than that of the original intake system.  By reducing turbo spool by up to 500rpm in some cases through the enhanced efficiency of the system, lightning fast turbo response is guaranteed.  In our experience, no other intake kit gives higher gains. GIANT FILTER Your choice of our unique Trifoam® or Pleated Cotton filter construction, hand-made in the UK for the perfect filtration and minimum restriction. SOUND QUALITY You'll hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained. POWER GAINS Efficient filtration and huge filter surface area means power and torque gains support higher power remaps. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. A fully-enclosed gloss Midnight Black aluminium spinning contains the high flow triple-layer cone filter. Giant Trifoam™ or Pleated Cotton filter construction, gives an exceptionally high level of filtration The silicon hose joining turbo and the intake system features a formed internal lip, ensuring smooth airflow transition. A formed intake scoop mounts securely into the front panel. Laser-cut mounting bracket for perfect fitment each time. CONFIRMED APPLICATIONSVolkswagen Polo GTI 1.8 2017-2018 6CSeat Ibiza Cupra 1.8 2017-2018 6J

Read more less

One of the most cost-effective improvements you can make to your car, improving power and economy. The Racingline Performance Panel Filter simply fits directly into the airbox as a direct replacement for the standard restrictive paper air filter element. CONFIRMED APPLICATIONSVW Polo GTI 1.4 TSI 6R 2009+ SEAT Ibiza Cupra 1.4 TSI 2008-2015 6J Skoda Fabia vRS 1.4 TSI II 2010-2014

Read more less

Racingline Hi-Flow Turbo Inlet 1.0TSI – VWR12UPITINLET The new 1.0 TSI Turbo Inlet Elbow transforms the airflow reaching your turbocharger. Let your engine breathe free! It’s compatible with your factory intake box, ideally combined with our Performance Filter. It also fits with other aftermarket intakes, and will be the perfect compliment to our upcoming Cold Air Intake too. It’s ready to support higher power outputs and even turbo upgrades in future. The Intake Upgrade Kit comprises a new high-flow Turbo Silicone Inlet Hose plus Turbo 90 Inlet. Together these upgrades allow greatly increased airflow from your intake into the turbocharger for lightning fast turbo response and a worthwhile power gain. So whether you’re running a standard airbox or you’ve already fitted an intake system, you’ll be wasting potential airflow gains without this Turbo Inlet Elbow! Confirmed Applications All models fitted with the current EA211 1.0 TSI engine; Volkswagen UP GTI 2016+ Volkswagen UP 1.0 TSI 2016+ Volkswagen Polo 1.0 TSI 2017+ AW Volkswagen Polo 1.0 TSI 2014+ AW Volkswagen Golf 7 & 7.5 1.0 TSI 2015-2020 Volkswagen Caddy 1.0 TSI 2015-2020 Volkswagen T-Roc 1.0 TSI 2017+ Volkswagen T-Cross 1.0 TSI 2017+ Volkswagen Touran 1.0 TSI 2018+ Audi A1 1.0 TSI 2015+ Audi Q2 1.0 TSI 2016+ Audi A3 1.0 TSI 2016+ Seat Ibiza 1.0 TSI 2015+ Seat Leon 1.0 TSI 2015+ Seat Arona 1.0 TSI 2017+ Seats Ateca 1.0 TSI 2016+ Seats Toledo 1.0 TSI 2017+ Skoda Fabia 1.0 TSI 2014+ Skoda Octavia 1.0 TSI 2016+ Skoda Karoq 1.0 TSI 2017+ Skoda Rapid 1.0 TSI 2017+   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12UPITINLET

Read more less

BREATHE FREE. LET YOUR ENGINE BREATHE. Take your RacingLine Intake to the next level with our Intake Upgrade Kit. For Audi S1, Polo GTI 1.8 and Ibiza Cupra 1.8. ​ NOTE: right hand drive cars only WHAT'S SO SPECIAL? One of our most popular products is the Cold-Air Intake System kit for Audi S1, the latest 6C Polo GTI 1.8 and Ibiza Cupra 1.8. ​ This Intake Upgrade Kit adds to your intake and takes things to the next level, ready to support higher power outputs and even turbo upgrades. The Intake Upgrade Kit comprises a new high-flow Turbo Inlet Hose plus Turbo 90 Inlet. Together these upgrades allow greatly increased airflow from your Intake into the turbocharger for lightning fast turbo response and higher power gains than the intake alone. The Upgrade Kit replaces the silicone Inlet Hose that was supplied with your intake - you won't need that any more. Put simply, you'll be wasting a chunk of the hard-gotten gains from your high-flow intake system without the Intake Upgrade Kit! COMPATIBILITY Works in conjunction with the RacingLine Intake, plus either the IS12, IS20 or IS38 turbos, ready for any future upgrades you make POWER GAINS Replacing the standard plastic pipe and elbow's highly restrictive airflow path through to the turbo gives a worthwhile power gain through smoothing and opening up that turn into the turbo SIMPLE FIT Fitting is very straightforward. The kit is installed in around 15 minutes using just hand tools.   And easily returned to standard, should you ever wish. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced high quality silicone to prevent deformation under boost pressure or heat Maximum diameter ultra smooth, high-gloss silicone with smooth transitions promotes airflow Formed silicon internal lip on the joins ensures smooth airflow transition Twin nitrile O-rings for the perfect seal into the turbo Maximum diameter ultra-thin wall T6-6061 aluminium with smoothed internal bore for optimised airflow CONFIRMED APPLICATIONSNOTE: the Intake Upgrade Kit currently only fits RIGHT HAND DRIVE cars. A kit for LHD cars is coming soon. ​ Some customers have fitted this kit to LHD cars, but it requires minor modification to the Turbo 90 Inlet.  ​ Audi S1 2.0 TFSI 2015-2018 Volkswagen Polo GTI 1.8 2017-2018 6CSeat Ibiza Cupra 1.8 2017-2018 6J ​ * MUST HAVE RACINGLINE INTAKE KIT FITTED

Read more less

Racingline Filter Oil & Cleaning Kit The Racingline Oil and Cleaner Kit will help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years. Instructions are provided for cleaning and maintenance. It’s a simple process, but please take time to read through, or ensure that your technician reads them, before you begin. We would suggest that you keep these notes with your car for future maintenance/owners. We recommend that the filter element is cleaned and reoiled every 10,000 miles/16,000 km, and/or a visual inspection at least every 12 months. This is a simple procedure, and will ensure that your filter continues to deliver the power improvements over a standard car. If your car is regularly used in a dry/dusty environment, we advise that you clean and re-oil your filter more regularly If you don’t clean your filter at the above intervals, no loss of filtration will occur, and your engine will still be fully protected. However, the performance advantages from the additional air flow of a clean filter will be lost. You will also shorten the life of the filter element. REPLACEMENT FILTER Like all the other filters on your car, it’s worth replacing the air filter element itself periodically. Rather than cleaning and re-oiling, lots of customers prefer to simply replace their filter element for what is a relatively low cost. We recommend replacement after 2 years for optimum performance. Of course, the filter will last for a longer period of time with correct maintenance and inspection for condition of foam as laid out below. BUY REPLACEMENT FILTER Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120000

Read more less