PERFORMANCE - SEAT TOLEDO MK4 2011-2024

With the success of FMINDK30 we took the opportunity to revisit the UP GTI and looked to see if we could improve on the 1.0 TSI air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was very restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by using our CAD system and physical prototypes. The OEM plastic turbo inlet includes a restrictive ribbed and hollow noise chamber that is designed to disturb the air flow and reduce induction noise, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we removed the chamber allowing us to increase the volume and air flow significantly. Our hose design also has an internal stepped area where it is positioned and joined to the turbo housing, this is to ensure the transition is as smooth as possible from the inlet tract to the turbo. Several different designs and material choices were tested until we arrived with the product you see here. The construction of FMTIA3 is manufactured from reinforced multi ply silicone which is more durable than the OEM plastic pipe and it will also not suffer from heat soak like other similar products available. With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger. One significant feature of FMTIA3 is its compatibility with vehicles equipped with and without the PCV system integrated into the existing turbo intake, the early engines do not have the breather system in place from the fuel tank to the elbow. We supply the necessary hardware to blank of the elbow spouts if its required to fit the turbo inlet adaptor to the earlier engine revision The one way valve and coupler adaptor are also supplied so the elbow can be installed to the newer revised engine. The FMTIA3 is also compatible with the factory air box, however for the best performance results we recommend using our intake systems for your particular chassis application.   This is a product which is essential when tuning the 1.0 TSI engine, if its either stage one or stage two tuning we have seen consistent gains from 3-5 bhp depending on the vehicles state of tune. This is a straightforward yet very effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 60 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Increased capacity  No engine check lights (EML) Increased air flow Lifetime warranty* FITS: >> AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSIA31.0TSI>> SeatArona1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSILeonMk3 2012-20201.0 TSI 2015-2020Toledo1.0 TSI >> SkodaFabiaNJ 2014-20211.0 TSI Octavia1.0 TSI (2018-2021)Rapid1.0 TSI>> VolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Roc1.0 116PSUp1.0 GTI/TSI

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

Product Description 70mm I/D Rubber Neck Open Cone Air Filter - High flow construction and increased surface area Replaces the filter in the following kits - FMINDK5- Ford Fiesta 1.0 Ecoboost induction kit FMINDST180- Ford Fiesta ST180 induction kit FMINDASTG - Astra G induction kit *Please note - this filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.

Read more less

PLEASE NOTE: THIS PRODUCT WILL NOT FIT 2019 MODELS This Forge Motorsport intake kit is for the VW Polo, Skoda Spaceback, and Seat Toledo 1.0TSI This intake kit includes a bespoke aluminium housing, powder coated black for that OEM look and hard wearing finish. This has a dual purpose of drawing air from the cold air inlet on the slam panel and shielding that cold air from the heat of the engine. The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of 3 colours; black, red or blue. Please select colour from the drop-down list. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically Lifetime warranty* FITS: SeatToledo1.0 TSI SkodaRapidSpaceback 1.0 TSIVolkswagenPolo1.0 TSI  Washable and reusable design. Layered multi-density foam technology. Designed and manufactured in Great Britain. Improvement in engine power and torque with superior engine protection from dirt and dust ingress. Designed to flow stronger for longer. Fitting is straightforward and can be completed in 20-30 minutes. This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock. The filter is manufactured to Forge’s specifications by Pipercross - Please note - the Pipercross filter is excluded from the Forge lifetime warranty        Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less

The Forge UNOS boost controller is a ball and spring CNC machined to aircraft grade specifications and incorporates a ratchet type top adjuster that will allow for the positive and precise adjustment that your driving style demands. The controller can be dash or engine bay mounted to suit your preference. This product is a universal component, and as such, no vehicle-specific fitting instructions can be provided. This product is designed and built with the intent of increasing the boost output of any forced induction system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Forge Motorsport nor any of it’s Authorized Distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment.   In The Box:1 x FMUNOS Boost Controller1 x Uprated Unos Spring2 x Unos Brackets2 x M4 x 8 Socket Cap Bolts1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less