PERFORMANCE - SEAT TOLEDO MK4 2011-2024

With the success of FMINDK30 we took the opportunity to revisit the UP GTI and looked to see if we could improve on the 1.0 TSI air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was very restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by using our CAD system and physical prototypes. The OEM plastic turbo inlet includes a restrictive ribbed and hollow noise chamber that is designed to disturb the air flow and reduce induction noise, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we removed the chamber allowing us to increase the volume and air flow significantly. Our hose design also has an internal stepped area where it is positioned and joined to the turbo housing, this is to ensure the transition is as smooth as possible from the inlet tract to the turbo. Several different designs and material choices were tested until we arrived with the product you see here. The construction of FMTIA3 is manufactured from reinforced multi ply silicone which is more durable than the OEM plastic pipe and it will also not suffer from heat soak like other similar products available. With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger. One significant feature of FMTIA3 is its compatibility with vehicles equipped with and without the PCV system integrated into the existing turbo intake, the early engines do not have the breather system in place from the fuel tank to the elbow. We supply the necessary hardware to blank of the elbow spouts if its required to fit the turbo inlet adaptor to the earlier engine revision The one way valve and coupler adaptor are also supplied so the elbow can be installed to the newer revised engine. The FMTIA3 is also compatible with the factory air box, however for the best performance results we recommend using our intake systems for your particular chassis application.   This is a product which is essential when tuning the 1.0 TSI engine, if its either stage one or stage two tuning we have seen consistent gains from 3-5 bhp depending on the vehicles state of tune. This is a straightforward yet very effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 60 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Increased capacity  No engine check lights (EML) Increased air flow Lifetime warranty* FITS: >> AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSIA31.0TSI>> SeatArona1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSILeonMk3 2012-20201.0 TSI 2015-2020Toledo1.0 TSI >> SkodaFabiaNJ 2014-20211.0 TSI Octavia1.0 TSI (2018-2021)Rapid1.0 TSI>> VolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Roc1.0 116PSUp1.0 GTI/TSI

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:80mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This Performance intake kit is designed to fit the MK7 Volkswagen Golf, Audi, Seat Leon, and Skoda that have the EA211 - 1.4 TSI/TFSI engine. Features 70mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Ramair Foam Filter Black powder coated aluminium intake pipe PVC intake ducting Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi A3 (8V) 1.4 TFSI

Read more less

This performance intake kit is designed to fit the VW 1.0 TSI platform. For full compatibility please check list below. Features Easy to maintain with our filter maintenance kit – CK-003 Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Proram pleated filter Black powder coated aluminium intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2018 Audi A1 (8X) 1.0 TFSI 2016-2020 Audi A3 (8V) 1.0 TFSI 2017-2025 Seat Arona (KJ) 1.0 TSI 2016-2025 Seat Ateca (KH) 1.0 TSI 2015-2020 VW Caddy (MK4) 1.0 TSI 2014-2022 Skoda Fabia (MK3) 1.0 TSI 2015-2020 VW Golf (MK7) 1.0 TSI 2019-2025 Skoda Kamiq (NW) 1.0 TSI 2017-2025 Skoda Karoq (NU7/ND7) 1.0 TSI 2015-2020 Seat Leon (MK3) 1.0 TSI 2016-2020 Skoda Octavia (MK3) 1.0 TSI 2017-2025 VW Polo (AW) 1.0 TSI 2017-2019 Skoda Rapid (NH) 1.0 TSI 2016-2020 Audi Q2 (GA) 1.0 TFSI 2019-2025 Skoda Scala (NW) 1.0 TSI 2018-2025 VW T-Cross (MK1) 1.0 TSI 2019-2025 VW T-Roc (MK1) 1.0 TSI 2017-2019 Seat Toledo (MK4) 1.0 TSI 2015-2017 Seat Ibiza (MK4) 1.0 TSI 2018-2025 Seat Ibiza (MK5) 1.0 TSI

Read more less

Description This is a performance enhancing induction kit for the following vehicles :  Audi A1 (8X) - 1.4 TFSI (EA111 - Single Turbo) – 2010 to 2015Seat Toledo (KG) - 1.4 TFSI (EA111 - Single Turbo) – 2012 to 2015Skoda Rapid (NH) - 1.4 TFSI (EA111 - Single Turbo) – 2012 to 2015 Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield. Black powdercoated inlet pipe. Red pleated nanofibre filter. Comes complete with all the necessary mounting hardware and a comprehensive installation instruction guide. Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2010 Audi A1 (8X) 1.4 TFSI 2011 Audi A1 (8X) 1.4 TFSI 2012 Audi A1 (8X) 1.4 TFSI 2013 Audi A1 (8X) 1.4 TFSI 2014 Audi A1 (8X) 1.4 TFSI 2015 Audi A1 (8X) 1.4 TFSI 2012 Seat Toledo (KG) 1.4 TSI 2013 Seat Toledo (KG) 1.4 TSI 2014 Seat Toledo (KG) 1.4 TSI 2015 Seat Toledo (KG) 1.4 TSI 2012 Skoda Rapid (NH) 1.4 TSI 2013 Skoda Rapid (NH) 1.4 TSI 2014 Skoda Rapid (NH) 1.4 TSI 2015 Skoda Rapid (NH) 1.4 TSI

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Crankcase oil breather filter made in the UK. Our material wont breakdown under use and there is no cheap chrome parts to go rusty under you engine bay. Comes complete with clip for attachment. Also because of its unique flexible structure it can fit in pretty much any location no matter how tight! Clean using our filter maintenance kit - CK-003   Internal Neck Diameter (mm) Overall Filter Height (mm) Over Outer Diameter (mm) Material Unit Quanity You Choose 68 48 60 PPI Foam / Polymer Neck 1

Read more less

Ramair filters owe much of their dirt retaining properties to the unique advanced polymer treatment with which they are impregnated during manufacture. They can be given a new lease of life when they become heavily soiled by cleaning them thoroughly with Ramair polymer solvent cleaner and applying fresh Treatment to the foam filter material. Please Note: Ramair Filters Treatment is more advanced than ordinary filter oil. Using any other product may reduce the effectiveness of your filter and may affect the warranty. Ramair polymer solvent cleaner is: NON TOXICNON-CORROSIVE100% ORGANICBIODEGRADABLE Economy cleaning kit (CK-001) includes 1x 100ml cleaner, 1x 100ml Ramair advanced treatment in bottles, set of rubber gloves and instructions on cleaning and best re-application.

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Product Details - RP-104 Race Pod AirFilter Universal    Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RPfilters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-104 65mm 95mm 137mm 15mm Image is for illustration, you are purchasing a single filter with the specified dimensions. -------------------------------------- Product Details - RP-105 Race Pod AirFilter Universal    Heavily used in F3 racing cars. Each filterhas a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-105 54mm 75mm 280mm 30mm Image is for illustration, you are purchasing a single filter with the specified dimensions. ----------------------------------  Product Details - RP-106 Race Pod Air Filter Universal                        Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled.   The filter is specially strengthened using a stainless steel internal mesh, which we have developed & used in European and world touring cars!   With its large size, technologically advanced filter is capable of handling great flow rates. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-106 84mm 130mm 105mm 15mm ---------------------------- Product Details - RP-108 Race Pod AirFilter Universal    Heavily used in F3 racing cars. Each filterhas a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine.Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-108 63mm 81mm 250mm 30mm Image is for illustration, you are purchasing a single filter with the specified dimensions. ------------- Product Details - RP-110 Race Pod Air Filter Universal    Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-110 65mm 90mm 522mm 30mm ----------------------- Product Details - RP-111 Race Pod Air Filter Universal    Heavily used in F3 racing cars but owing to their design now being used in a variety of applications. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-111 65mm 90mm 286mm 30mm -------------------------- Product Details - RP-113 Race Pod Air Filter Universal    Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-113 65mm 90mm 294mm 30mm -------------- Product Details - RP-114 Race Pod Air Filter Universal    Heavily used in F3 racing cars but owing to their design now being used in a variety of applications. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-114 65mm 90mm 590mm 30mm

Read more less

This is a replacement panel filter for various VAG vehicles. For a full list of fitments see compatibility chart. Features High flow, synthetic nanofiber filtration media Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using our filter maintenance kit - CK-003 Precision injection moulded for a perfect fit Guaranteed surface area using high quality custom blended polymer What Does It Do? This Ramair performance filter has been designed to replace your standard OEM air filter inside your vehicles air box. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. Filter Length: 270mm (10.6inch) Filter Width: 220mm (8.7inch) Filter Shape: Rectangle Filter Material: Pleated Nanofibre Fitment Compatibility Chart This product fits the following: MAKE MODEL ENGINE YEAR Audi A1 (MK1) 1.0 TFSI 2015-2018 Audi A1 (MK2) 25 TFSI (1.0 TSI) 2018-2020 Audi A1 (MK2) 30 TFSI (1.0 TSI) 2018-2020 Audi A3 (8V) 30 TFSI (1.0 TSI) 2016-2020 Audi Q2 (GA) 30 TFSI (1.0 TSI) 2016-2020 Seat Arona 1.0 TSI 2017-2020 Seat Ateca (KH) 1.0 TSI 2017-2020 Seat Ibiza (MK5) 1.0 TSI 2015-2017 Seat Ibiza (MK6) 1.0 TSI 2017-2020 Seat Leon (MK3) 1.0 TSI 2015-2020 Seat Leon (MK4) 1.0 TSI 2020-2020 Seat Toledo (MK4) 1.0 TSI 2017-2020 Skoda Fabia (MK3) 1.0 TSI 2017-2020 Skoda Kamiq 1.0 TSI 2019-2020 Skoda Karoq 1.0 TSI 2017-2020 Skoda Octavia (MK3) 1.0 TSI 2016-2020 Skoda Rapid (NH) 1.0 TSI 2017-2020 Skoda Scala 1.0 TSI 2019-2020 Volkswagen Caddy (MK4) 1.0 TSI 2015-2020 Volkswagen Golf (MK7) 1.0 TSI 2015-2019 Volkswagen Golf (MK8) 1.0 TSI 2020-2020 Volkswagen Polo (AW) 1.0 TSI 2018-2020 Volkswagen Polo (6R 6C) 1.0 TSI 2014-2018 Volkswagen T-Cross 1.0 TSI 2018-2020 Volkswagen T-Roc 1.0 TSI 2017-2020 Volkswagen Touran 1.0 TSI 2018-2020 Volkswagen Up 1.0 TSI 2016-2020 Volkswagen Up 1.0 TSI GTI 2017-2020

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: 70mm Filter Neck Length: 14mm Filter Overall Height: 208mm Filter Base Width: 180x102mm Filter Top Width: 185x105mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This PRORAM performance filter has been designed to fit any vehicle with the appropriate MAF/inlet size, you can find your required size by removing the standard intake pipe or MAF housing from your air box and measuring its diameter. It is important to note, these filters have also been designed to fit over your inlet and would not be suitable to be fitted to a soft silicone hose. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Clean using our filter maintenance kit - CK-003

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This PRORAM performance filter has been designed to fit any vehicle with the appropriate MAF/inlet size, you can find your required size by removing the standard intake pipe or MAF housing from your air box and measuring its diameter. It is important to note, these filters have also been designed to fit over your inlet and would not be suitable to be fitted to a soft silicone hose. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Clean using our filter maintenance kit - CK-003 Neck Style Neck - Internal Diameter Overall Length Top Width Base Width Polymer you choose 170mm 125mm 120mm

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This PRORAM performance filter has been designed to fit any vehicle with the appropriate MAF/inlet size, you can find your required size by removing the standard intake pipe or MAF housing from your air box and measuring its diameter. It is important to note, these filters have also been designed to fit over your inlet and would not be suitable to be fitted to a soft silicone hose. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Clean using our filter maintenance kit - CK-003 Filter Neck Internal Diameter: You Choose Filter Neck Length: Filter Base Width: 150mm Filter Top Width: 120mm Filter Overall Length: 160mm Filter Material: Synthetic Filter Base Material: Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit This PRORAM performance filter has been designed to fit any vehicle with the appropriate MAF/inlet size, you can find your required size by removing the standard intake pipe or MAF housing from your air box and measuring its diameter. It is important to note, these filters have also been designed to fit over your inlet and would not be suitable to be fitted to a soft silicone hose. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Clean using our filter maintenance kit - CK-003 Sizing: Neck Style Neck - Internal Diameter Overall Length Top Width Base Width Aluminium Velocity Stack You Choose 325mm 120mm 195mm

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:102mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit This PRORAM performance filter has been designed to fit any vehicle with the appropriate MAF/inlet size, you can find your required size by removing the standard intake pipe or MAF housing from your air box and measuring its diameter. It is important to note, these filters have also been designed to fit over your inlet and would not be suitable to be fitted to a soft silicone hose. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Clean using our filter maintenance kit - CK-003   External Neck Diameter (mm) Overall Filter Length (mm) Overall Filter Width (mm) Material Unit Quanity Choose Size 88 195 Nanofibre Pleat / Aluminium Velocity Stack 1

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! This filter is designed to be used in conjuction with our velocity stacks (SKU: VS-*SIZE*-BK) Clean using our filter maintenance kit - CK-003 Filter Neck Internal Diameter:152mm (6inch) Filter Neck Length:35mm (1.4inch) Filter Base Width:195mm (7.7inch) Filter Top Width: 120mm (4.7inch) Filter Overall Length:140mm (5.5inch) Filter Material: Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This Ramair pleated performance filter has been designed to fit any vehicle with the appropriate MAF/inlet size, you can find your required size by removing the standard intake pipe or MAF housing from your air box and measuring its diameter.  These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. This filter is designed to be used in conjuction with our velocity stacks (SKU: VS-*SIZE*-BK) Clean using our filter maintenance kit - CK-003 Filter Neck Internal Diameter: 152mm (6inch) Filter Neck Length: 25mm (1inch) Filter Base Width: 195mm (7.7inch) Filter Top Width: 142mm (5.6inch) Filter Overall Length: 88mm (3.5inch) Filter Material: Pleated Nanofibre Filter Base Material: Rubber polymer

Read more less