PERFORMANCE - SEAT TOLEDO MK4 2011-2024

With the success of FMINDK30 we took the opportunity to revisit the UP GTI and looked to see if we could improve on the 1.0 TSI air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was very restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by using our CAD system and physical prototypes. The OEM plastic turbo inlet includes a restrictive ribbed and hollow noise chamber that is designed to disturb the air flow and reduce induction noise, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we removed the chamber allowing us to increase the volume and air flow significantly. Our hose design also has an internal stepped area where it is positioned and joined to the turbo housing, this is to ensure the transition is as smooth as possible from the inlet tract to the turbo. Several different designs and material choices were tested until we arrived with the product you see here. The construction of FMTIA3 is manufactured from reinforced multi ply silicone which is more durable than the OEM plastic pipe and it will also not suffer from heat soak like other similar products available. With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger. One significant feature of FMTIA3 is its compatibility with vehicles equipped with and without the PCV system integrated into the existing turbo intake, the early engines do not have the breather system in place from the fuel tank to the elbow. We supply the necessary hardware to blank of the elbow spouts if its required to fit the turbo inlet adaptor to the earlier engine revision The one way valve and coupler adaptor are also supplied so the elbow can be installed to the newer revised engine. The FMTIA3 is also compatible with the factory air box, however for the best performance results we recommend using our intake systems for your particular chassis application.   This is a product which is essential when tuning the 1.0 TSI engine, if its either stage one or stage two tuning we have seen consistent gains from 3-5 bhp depending on the vehicles state of tune. This is a straightforward yet very effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 60 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Increased capacity  No engine check lights (EML) Increased air flow Lifetime warranty* FITS: >> AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSIA31.0TSI>> SeatArona1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSILeonMk3 2012-20201.0 TSI 2015-2020Toledo1.0 TSI >> SkodaFabiaNJ 2014-20211.0 TSI Octavia1.0 TSI (2018-2021)Rapid1.0 TSI>> VolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Roc1.0 116PSUp1.0 GTI/TSI

Read more less

This performance intake kit is designed to fit the VW 1.0 TSI platform. For full compatibility please check list below. Features Easy to maintain with our filter maintenance kit – CK-003 Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Proram pleated filter Black powder coated aluminium intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2018 Audi A1 (8X) 1.0 TFSI 2016-2020 Audi A3 (8V) 1.0 TFSI 2017-2025 Seat Arona (KJ) 1.0 TSI 2016-2025 Seat Ateca (KH) 1.0 TSI 2015-2020 VW Caddy (MK4) 1.0 TSI 2014-2022 Skoda Fabia (MK3) 1.0 TSI 2015-2020 VW Golf (MK7) 1.0 TSI 2019-2025 Skoda Kamiq (NW) 1.0 TSI 2017-2025 Skoda Karoq (NU7/ND7) 1.0 TSI 2015-2020 Seat Leon (MK3) 1.0 TSI 2016-2020 Skoda Octavia (MK3) 1.0 TSI 2017-2025 VW Polo (AW) 1.0 TSI 2017-2019 Skoda Rapid (NH) 1.0 TSI 2016-2020 Audi Q2 (GA) 1.0 TFSI 2019-2025 Skoda Scala (NW) 1.0 TSI 2018-2025 VW T-Cross (MK1) 1.0 TSI 2019-2025 VW T-Roc (MK1) 1.0 TSI 2017-2019 Seat Toledo (MK4) 1.0 TSI 2015-2017 Seat Ibiza (MK4) 1.0 TSI 2018-2025 Seat Ibiza (MK5) 1.0 TSI

Read more less

PLEASE NOTE: THIS PRODUCT WILL NOT FIT 2019 MODELS This Forge Motorsport intake kit is for the VW Polo, Skoda Spaceback, and Seat Toledo 1.0TSI This intake kit includes a bespoke aluminium housing, powder coated black for that OEM look and hard wearing finish. This has a dual purpose of drawing air from the cold air inlet on the slam panel and shielding that cold air from the heat of the engine. The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of 3 colours; black, red or blue. Please select colour from the drop-down list. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically Lifetime warranty* FITS: SeatToledo1.0 TSI SkodaRapidSpaceback 1.0 TSIVolkswagenPolo1.0 TSI  Washable and reusable design. Layered multi-density foam technology. Designed and manufactured in Great Britain. Improvement in engine power and torque with superior engine protection from dirt and dust ingress. Designed to flow stronger for longer. Fitting is straightforward and can be completed in 20-30 minutes. This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock. The filter is manufactured to Forge’s specifications by Pipercross - Please note - the Pipercross filter is excluded from the Forge lifetime warranty        Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less