Performance - Toyota Yaris GR (2020-Present)

As part of our expanding Yaris GR Gen 2 product range, AIRTEC Motorsport is proud to launch our big boost pipe kit upgrade suitable for track or fast road use. A direct replacement kit that offers increases in performance and response, the enlarged boost pipe kit features a freer-flowing design with a increased internal diameter on both the hot side and cold side. Our comprehensive kit begins with a gentle taper from the 40mm turbo outlet that increases by 25% to reach 50mm as it meets the AIRTEC Motorsport intercooler inlet side.From the intercooler’s 60mm outlet side, the pipework tapers back down to meet the throttle body’s 49.5mm size, maintaining a 53mm minimum as it reaches the new cast aluminium throttle body elbow. In doing so, it offers up to a 39% increase in internal diameter during the most restrictive part of the OEM pipework (38mm) just before the throttle body elbow. This increased overall internal volume and improved design works to reduce restriction and improve flow from the turbo and to the inlet, providing an increase in power and response. Made from high quality aluminium, the kit includes a revised throttle body elbow, a series of high-quality silicone connectors and all pipework is finished in powder-coated black for a subtle OEM+ look. The installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains, the AIRTEC Motorsport enlarged boost pipe kit is an essential modification. Will fit both stage 1 & stage 3 intercooler.  Features: Designed specifically for Gen 2 models 50% increase in cold side pipe Up to 39% increase in bore size Larger and freer-flowing design Comprehensive eight-piece kit Improves flow from the turbo to the inlet Increases mid-range performance Direct replacement fitment Made from high quality aluminium Powder-coated black finish Includes all fixtures and fittings Features detailed fitting guide  Registered Design Right number: Application Pending AIRTEC Part No: ATMSYGR26

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our replacement uprated radiator for the Yaris GR Gen 1 and Gen 2 models, suitable for track or fast road use. With huge experience in developing uprated radiators for a variety of modified track and road cars, we chose to create a direct replacement radiator with a much deeper core to make the most of the space available in the original location. As a result, our radiator offers a huge capacity increase, thanks to a core that measures 48% bigger than the standard Toyota core. Frontal surface area has also increased in size to make the most of the air flow provided. Our lightweight radiator solution also features a tube-and-fin aluminium construction together with welded aluminium end tanks. This design increases the cooling system’s capacity as well as improving its efficiency, allowing it to retain lower running temperatures compared to an original unit during prolonged or hard use. It’s also suited to modified or track orientated vehicles that operate with constant higher temperatures, or for hotter climate countries, where cooling can be an issue. Designed as a direct replacement item, fitting is a simple process, making it a great addition to improve cooling. Dimensions: Original Toyota Radiator:Width: 624mmHeight: 410mmDepth: 28mmCapacity: 7.16 litresFrontal Area: 256cm² AIRTEC Motorsport Radiator:Width: 624mmHeight: 426mmDepth: 40mmCapacity: 10.6 litresFrontal Area: 266cm² Features: 48% increase in capacity over original Toyota radiator Increased frontal area for improved air flow Larger 40mm tube-and-fin core design Lightweight aluminium construction Improved cooling efficiency Connects to original mounts and connectors Comes with detailed fitting instructions Direct replacement with no cutting or trimming AIRTEC part number: ATRADYGR3

Read more less

  Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our ultimate specification intercooler kit with integrated crash bar design aimed at modified Toyota Yaris GR Gen 2 owners who want the very highest levels of cooling efficiency and performance for track or fast road use. The ChallengeOur earlier Stage 1 intercooler was developed to cater for tuned Yaris GR models of the time and has become a popular upgrade. However, Yaris GR tuning potential has since evolved and it became clear we would need a more substantial intercooler package better suited to big power, heavily tuned cars whilst future-proofing them for further tuning development. The SolutionAs a result, we developed the biggest intercooler kit we could and made the most of the available space behind the bumper by using a stepped core design that would rise up behind the entire front grille area. Using our experience in developing intercooler kits that integrate a replacement crash bar design, we were able to CNC machine billet brackets that allowed the intercooler to bolt in place. By doing so, the new intercooler offers a huge 143% increase in overall capacity in comparison to the original intercooler (54% bigger than our Stage 1 kit), and also features a colossal 115% increase in frontal area over standard (78% over our Stage 1), which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the Stage 3 AIRTEC Motorsport intercooler also features an enlarged 60mm inlet to match the outlet, and together the kit offers much greater efficiency and volume over both the standard and our Stage 1 intercoolers, which it proved during testing. Available in a high-quality powder coated black finish, the comprehensive kit is a direct replacement and comes complete with Pro Hoses silicone connectors to adapt to standard boost pipes – . It also comes complete with all fixtures and fittings, as well as detailed fitting instructions. To suit the Gen 2 model, the kit is also supplied with an extra mounting bracket to allow the original water spray system to be retained. A must have modification for those looking for only the very best for their modified Yaris GR models. The TestingDuring track testing at Snetterton Circuit in the UK using our 420bhp AIRTEC Motorsport development car, we logged the inlet and outlet temperatures of both our Stage 1 and Stage 3 intercoolers back-to-back. The figures showed that at this high level of power, over the course of a hot lap the Stage 1 starts to fight maintaining a stable charge temperature, with a 15-degree range highlighting its battle against the high and sustained levels of boost pressure. However, with the Stage 3 intercooler fitted, the figures showed the larger core with increased air flow provided a much more consistent charge temperature throughout the test, highlighted with just a 5-degree range in temperature. Verdict: Both intercoolers demonstrate a high level of efficiency, reducing charge air temperature by over 200 degrees and equating to over 90% efficiency, but the Stage 3 could sustain that level for longer, which is crucial for highly tuned cars to run safely for extended periods of time. T1 – TEMPERATURE INT2 – TEMPERATURE OUT Dimensions:OEM intercoolerWidth: 645mmHeight: 145mmDepth: 80mmCapacity: 7.5 litresFrontal area: 9,353cm² AIRTEC Motorsport intercoolerWidth: 610mmHeight: 330mmDepth: 110mm to 70mm stepped coreCapacity: 18.2 litresFrontal area: 20,130cm² Features: Specifically designed for the Yaris GR Gen 2 model Tried and tested to perform on heavily tuned cars 143% increase in overall capacity in comparison to original 115% increase in frontal area over standard Enlarged inlet pipe to 60mm Huge increase in cooling ability Incorporated crash bar design High-flow, moulded one-piece cast end tanks Gen 2 water spray system retained Powder coated black finish Includes fittings and fixtures Detailed fitting guide included   Please note: will NOT fit with AIRTEC Motorsport Oil Cooler (ATMSYGR04). Will fit with Stage 3 Oil Cooler (ATMSYGR14); now available.   AIRTEC Part No: ATINTYGR4

Read more less

Product Description With the release of the Gen 2 Yaris GR, we were quickly able to test fit our proven FMIC solution for the GEN 1 Yaris GR to this updated platform and achieved similar performance gains. However, due to the increased depth of the core used on FMINT25 over the OEM intercooler the water spray was no longer angled correctly to deliver effective cooling. The Forge Motorsport Water Spray Relocation Bracket angles the water spray nozzles to deliver the water mist as Toyota intended, allowing you to utilise the much-needed increased intercooler size over the OEM, combined with the enhanced cooling from the water spray to maximise results. Includes necessary hardware and instructions for installation Lifetime warranty

Read more less

Designed to replace the original plastic trim grilles fitted to the outside of the bumper that leave the side radiators open and suspectable to road debris damage. These mesh grilles are made from 2mm laser cut aluminium and are finished in a high-quality black powder coat. They match the design of the centre grille mesh and offer much better protection for the expensive radiators.  They are a direct replacement and require no additional fixings, cutting or modifying to fit.  AIRTEC part no: ATMSYGR30

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport are proud to launch our Stage 3 oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Developed in-house at AIRTEC HQ in the UK, this is our biggest oil cooler kit to date offering a huge 117% increase in volume over our Stage 1 oil cooler kit. Spanning across the entire front grille area for maximum air flow, the comprehensive kit also features laser-cut aluminium ducting to force cold air through the cooler. This allows it to fit with our Stage 3 intercooler kit (our Stage 1 oil cooler does not fit with the Stage 3 intercooler) to create the ultimate cooling package. Designed to fit both auto and manual transmissions, the package includes a large AIRTEC Motorsport oil cooler with ducting, bespoke laser-cut and powder-coated brackets, high-quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. TESTED ON TRACKTried and tested on race tracks around Europe with our own 400+bhp Yaris GR, we were able to develop this package after battling with excessive oil temperatures when pushing hard for several fast laps in a row. As a result, our design engineers created a larger volume kit with carefully designed added ducting, which when tested created a huge improvement in sustaining safe oil operating temperatures no matter the climate, or period of driving. Key features: Suitable specifically for the Gen 2 Yaris GR – fits auto and manual transmissions Huge 117% increase in volume over our Stage 1 oil cooler Fits with our Stage 3 intercooler kit  to create the ultimate cooling package Full width oil cooler complete with cold air ducting Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions   AIRTEC part no: ATMSYGR31

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our intercooler upgrade for the Yaris GR Gen 2, suitable for track or fast road use. Following on from the huge success of our Stage 1 intercooler for the Gen 1 model, we’ve created a package suitable for Gen 2 models with either automatic or manual transmission. The second generation Yaris GR uses a slightly different intercooler kit to the first generation cars in terms of fitting and the use of the water spray bar. Therefore in order to ensure there is no noticeable loss in performance during extended periods of hard driving on road or track, AIRTEC Motorsport has developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance is based upon our stepped-core design to make the most of the limited space available behind the bumper. The core steps from 110mm to 70mm and in doing so offers a huge 64% increase in overall capacity in comparison to the original intercooler. It also offers a 30% increase in frontal area over standard, which allows it to make the very most of the air flow provided. The inlet side of the intercooler retains a 50mm diameter to ensure minimal turbo lag whilst the outlet side increases to 60mm to offer less restriction. Together with our high-flow, moulded one-piece cast end tanks and an internal air diverter to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Despite this improvement, the kit fits neatly behind the original bumper and requires no trimming or cutting, and can be reverted back to standard with no issues. Designed to fit both auto and manual transmissions and includes a new bracket to mount the water spray bar. The comprehensive fitting kit includes all the correct fixtures and fittings, Pro Hoses silicone connectors as well as step-by-step installation instructions. The intercooler is available in a Pro-Series Black finish (with or without the AIRTEC logo) and gloss black Pro Hoses silicone connectors. Dimensions:Width: 610mmHeight: 195mmDepth: 110mm/70mm steppedInlet: 50mmOutlet: 60mm Features:  Suitable specifically for the Gen 2 Yaris GR – fits auto and manual transmissions 64% increase in capacity compared to original intercooler 30% increase in frontal area compared to original intercooler Huge increase in cooling ability Reduced charge temperatures High-flow, moulded one-piece cast end tanks Larger outlet pipe New bracket to mount water spray bar. Powder coated black finish All fittings and fixtures included Comes with detailed fitting guide AIRTEC part no: ATINTYGR3

Read more less

In standard form, the Yaris GR’s throttle body is plumbed into the cooling system’s loop and coolant is circulated around the outside of it.  This direct replacement silicone hose has been specifically made by Pro Hoses to remove the throttle body from the cooling system, which is required if you are changing to a bigger throttle body.  The kit features one silicone hose, two bungs to and two jubilee clips to effectively create a bypass loop. Pro Hoses part number: PH/COLGR2  

Read more less

Product Description Gains of 10bhp and 10lb/ft Temperature drops of up to 20°C Reduced turbo lag, increased response Greater overall surface area for greater heat dissipation Utilising a race specification tube and fin construction air core High flow cast end tanks ensuring optimum air transition for cooling efficiency A smoother power curve Volumetric increase of more than 100%, without additional lag Frontal area increase of over 40% Includes necessary hardware and instructions for installation Fits both Gen 1 and Gen 2 Yaris (select the water spray relocation bracket option if needed) Lifetime warranty If you have the Gen 2 Yaris GR with water spray option, you will need to select the additional bracket option. FMINT25 is a performance intercooler for the Toyota Yaris GR, produced, designed, and tested at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the Yaris GR’s engine. Our project brief was to develop an intercooler utilising all of the available space available in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine tuned by our computational fluid dynamics (CFD) team, and the end tanks were initially created by 3D printers. We then alloy cast our first prototypes from our 3D prints using a sand casting technique and started the testing procedure on several types of intercooler cores. The first iteration fitted the vehicle perfectly, however, our technicians and engineers felt the inlet and outlet should be enlarged along with providing the end user with the necessary boost pipes to ensure flow was maximized on the Toyota`s GR 3 cylinder engine. Before getting to work on the dyno, we spec'd three different type of cores; one of these being bar and plate and two being a tube and fin construction - with all three cores having different internal and external fin pitches and configurations. We then welded the test parts ready for testing along with fabricating an internal baffle to the inlet (hot side) of the end tank. This is to ensure, from our CFD research, that the total volume of the core internal is utilised for optimum performance. Compared to the OEM intercooler, the improved Forge product has a surface area increase of over 42% and an internal volume increase of over 100% as well as Gains of more than 10bhp and 10 lbs/ft. These gains can be even higher depending on your vehicles state of tune and complementing performance products like the turbo inlet adaptor and the inlet duct. As the hot and cold side, inlet and outlet, have been increased to 60mm, we have included within the intercooler kit all the necessary silicone hoses and hardware to complete the installation and connect to the OEM parts. The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components are needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit more stealthy or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy. Why do we test different cores? Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights e.g. 22 fins per inch or 17 fins per inch, as well as changing the internal fin pitches/shapes and density within the tube enabling to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core that is open to the atmosphere. Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. Having no pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures. Dyno Results Testing was completed on Litchfield’s Maha dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all their engine calibration and dyno testing. The vehicle used for testing had a full turbo back exhaust along with a DT UK Tuning box. Our first run with an ambient air temperature of 19.5°C, gave results of 301.3 BHP and 286.4 lbs/ft of torque. Later after the 3rd pull on the dyno, the inlet air temp quickly increased to nearly 58°C, with the BHP and torque both decreasing to 295bhp and 278 ft/lbs. Our first test Forge intercooler was on our bar and plate design core. The weather on this day was hotter with an ambient dyno cell temperature of 22.1°C. On our third dyno pull on the bar and plate design, the intercooler yields were 304.4 BHP and 295.5 lbs/ft of torque as shown in the graph below. The inlet air temp is highlighted in pink, and shows the intake air temperature reduced to 44°C. So we had achieved a good gain in torque and a reduction in inlet air temps when the testing environment was actually hotter.   For our second test we used a very high density external fin pitch core with a tube and fin design. These cores are typically lighter than the bar and plate counterparts. Again the dyno cell ambient air temps here higher than when we tested the OEM intercooler. This time the results showed we had again achieved an impressive reduction in IAT’s with power figures resulting in 304.1 BHP and 297.6 lbs/ft of torque, inlet air temps on the third pull were no higher than 46°C. Our third and final core to test had a slightly smaller thickness than the two previous variants resulting in a slightly smaller volume, and with the hottest test day so far of all the intercoolers in question at 25.4°C within the dyno cell, we were not confident we could improve on the previous results. The results however speak for themselves. On the third pull inlet air temps stayed at a steady 40°C and with the highest BHP gain at 307.3 BHP, and torque peaking at 296.4 lbs/ft  We had found our winning formula. At this point though we did not simply stop; we repeated our testing to ensure our results were true and checked all our test vehicles sensor data to ensure there were no negative effects.  

Read more less

Following an extensive development process, AIRTEC Motorsport are proud to launch our Stage 3 oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Developed in-house at AIRTEC HQ in the UK, this is our biggest oil cooler kit to date offering a huge 51% increase in volume over our Stage 1 oil cooler kit. Spanning across the entire front grille area for maximum air flow, the comprehensive kit also features laser-cut aluminium ducting to force cold air through the cooler. This allows it to fit with our Stage 3 intercooler kit (our Stage 1 oil cooler does not fit with the Stage 3 intercooler) to create the ultimate cooling package. The package includes a large AIRTEC Motorsport oil cooler with ducting, bespoke laser-cut and powder-coated brackets, high-quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. TESTED ON TRACKTried and tested on race tracks around Europe with our own 400+bhp Yaris GR, we were able to develop this package after battling with excessive oil temperatures when pushing hard for several fast laps in a row. As a result, our design engineers created a larger volume kit with carefully designed added ducting, which when tested created a huge improvement in sustaining safe oil operating temperatures no matter the climate, or period of driving. Key features: Designed and developed in the UK specifically for the Yaris GR Huge 51% increase in volume over our Stage 1 oil cooler Fits with our Stage 3 intercooler kit  to create the ultimate cooling package Full width oil cooler complete with cold air ducting Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSYGR14

Read more less

Following an extensive development process, AIRTEC Motorsport are proud to launch our auxiliary radiator and turbo cooler kits aimed at modified Yaris GR owners who require the ultimate cooling package to maintain steady running temperatures on track or fast road use. The challengeWhen modifying the Yaris GR to increase power and torque at more extreme levels, an unavoidable by product is the additional heat level that’s transferred to the car’s cooling system. During hard use this can become a substantial issue, as we found on our own 400bhp+ Yaris GR demo car whilst testing on track. After sustained periods of hard use (similar to a round of racing), coolant temperatures would eventually reach 102 degrees, which was enough to trigger the aftermarket ECU’s safety features, putting the car into limp mode. Similarly, oil temperatures reached 123 degrees. We needed to address the car’s entire cooling system if we were going continue to modify and track our Yaris. The solutionDeveloped in-house at AIRTEC HQ in the UK we designed a series of new products to address the cooling issues when pushed to the limit. This additional radiator fits neatly behind the fog light (requires removal) and utilises laser-cut aluminium ducting to force cold air through the radiator. To create a flow path and further improve cooling, air then exits via the inner arch liner (requires cutting). A pre-cut mesh shield is supplied for both the front and rear to protect the radiator from road debris damage. The radiator is plumbed directly into the existing oil/water heat exchanger system to improve the car’s overall capacity and cooling ability, allowing it to maintain a steady temperature for longer during hard use. This can fit with any of our intercooler or oil cooler combinations to create the ultimate cooling package. The comprehensive kit also features laser-cut and powder-coated brackets, high-quality Pro Hoses silicone lines as well as all fixtures and fittings, and detailed fitting instructions. The testingWe went back to the track fitted with both our turbo and auxiliary radiators, as well as our larger Stage 3 oil cooler fitted, and were able to see a 10 degree peak drop from the coolant temperature, reducing to a much safer constant 92 degrees whilst oil temperature reached a maximum of 94 degrees thanks to a mix of the larger oil cooler allowing more surface area to cool the oil and the turbo cooler being able to reject more heat for the car’s original oil/water heat exchanger. Key features: Designed and developed in the UK specifically for the Yaris GR Improves car’s cooling capacity and ability Ducting channels air in and allows it to exit via arch liner Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality Pro Hoses silicone lines Fits with all intercooler and oil cooler kits to create the ultimate cooling package Comprehensive kit with all fixtures, fittings and instructions Registered Design Right number: 6303748 AIRTEC part no: ATRADYGR2

Read more less

Following an extensive development process, AIRTEC Motorsport are proud to launch our turbo cooler and auxiliary radiator kits aimed at modified Yaris GR owners who require the ultimate cooling package to maintain steady running temperatures on track or fast road use. The challengeWhen modifying the Yaris GR to increase power and torque at more extreme levels, an unavoidable byproduct is the additional heat level that’s transferred to the car’s cooling system. During hard use this can become a substantial issue, as we found on our own 400bhp+ Yaris GR demo car whilst testing on track. After sustained periods of hard use (similar to a round of racing), coolant temperatures would eventually reach 102 degrees, which was enough to trigger the aftermarket ECU’s safety features, putting the car into limp mode. Similarly, oil temperatures reached 123 degrees. We needed to address the car’s entire cooling system if we were going continue to modify and track our Yaris. The solutionDeveloped in-house at AIRTEC HQ in the UK we designed a series of new products to address the cooling issues when pushed to the limit. This additional turbo cooler fits neatly behind the fog light (requires removal) and utilises laser-cut aluminium ducting to force cold air through the radiator. To create a flow path and further improve cooling, air then exits via the inner arch liner (requires cutting). A pre-cut mesh shield is supplied for both the front and rear to protect the radiator from road debris damage. The turbo cooler is plumbed directly into the cooling circuit that flows coolant to the turbo, therefore offering an immediate reduction in heat before the coolant reaches the hottest part of the car, which improves overall capacity and cooling ability, allowing it to maintain a steady temperature for longer during hard use. This can fit with any of our intercooler or oil cooler combinations to create the ultimate cooling package. The comprehensive kit also features laser-cut and powder-coated brackets, high-quality Pro Hoses silicone lines as well as all fixtures and fittings, and detailed fitting instructions. The testingWe went back to the track fitted with both our turbo and auxiliary radiators, as well as our larger Stage 3 oil cooler fitted, and were able to see a 10 degree peak drop from the coolant temperature, reducing to a much safer constant 92 degrees whilst oil temperature reached a maximum of 94 degrees thanks to a mix of the larger oil cooler allowing more surface area to cool the oil and the turbo cooler being able to reject more heat for the car’s original oil/water heat exchanger. Key features: Designed and developed in the UK specifically for the Yaris GR Improves car’s cooling capacity and ability Ducting channels air in and allows it to exit via arch liner Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality Pro Hoses silicone lines Fits with all intercooler and oil cooler kits to create the ultimate cooling package Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATRADYGR1

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport are proud to launch our Yaris GR Rear Turbo Pipe suitable for track or fast road use. Made from high quality silicone, the Pro Hoses pipe maintains a constant internal diameter throughout its length, compared to the original item which narrows and compresses at points causing restrictions to the flow and capacity. Our direct replacement pipe features a simpler, freer flowing design without these performance reducing restrictions. The comprehensive kit includes a billet hose connector and jubilee clips, which makes installation a simple task. Specification: Larger overall capacity and freer-flowing design Improvement in response and sound Direct replacement fitment High quality Pro Hoses silicone pipe Billet aluminium connector Includes jubilee clips Features detailed fitting guide

Read more less

As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our big boost pipe kit upgrade suitable for track or fast road use. A direct replacement kit that offers increases in performance and response, the enlarged boost pipe kit features a freer-flowing design with a increased internal diameter on both the hot side and cold side. Cold SideOur comprehensive eight-piece kit begins with a taper from the 40mm turbo outlet that increases by a huge 50% to reach 60mm as it meets the intercooler inlet side. This larger increase improves internal flow and allows fitment to our Stage 3 intercooler with 60mm inlet, making it ideal for cars fitted with hybrid turbos. Hot SideFrom the intercooler’s 60mm outlet side, the pipework tapers back down to meet the throttle body’s 49.5mm size, maintaining a 53mm minimum as it reaches the new cast aluminium throttle body elbow. In doing so, it offers up to a 39% increase in internal diameter during the most restrictive part of the OEM pipework (38mm) just before the throttle body elbow. This increased overall internal volume and improved design works to reduce restriction and improve flow from the turbo and to the inlet, providing an increase in power and response. Made from high quality aluminium, the kit includes a revised throttle body elbow, a series of high-quality silicone connectors and all pipework is finished in powder-coated black for a subtle OEM+ look. The installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged boost pipe kit is an essential modification. Features: 50% increase in cold side pipe to allow fitment of our Stage 3 intercooler Up to 39% increase in bore size Larger and freer-flowing design Comprehensive eight-piece kit Improves flow from the turbo to the inlet Increases mid-range performance Direct replacement fitment Made from high quality aluminium Powder-coated black finish Includes all fixtures and fittings Features detailed fitting guide Please note: Only for use with AIRTEC Motorsport Stage 3 intercooler upgrade

Read more less

Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our ultimate specification intercooler kit with integrated crash bar design aimed at modified Toyota Yaris GR owners who want the very highest levels of cooling efficiency and performance for track or fast road use. The challengeOur earlier Stage 1 intercooler was developed to cater for tuned Yaris GR models of the time and has become a popular upgrade. However, Yaris GR tuning potential has since evolved and it became clear we would need a more substantial intercooler package better suited to big power, heavily tuned cars whilst future-proofing them for further tuning development. The solutionAs a result, we developed the biggest intercooler kit we could and made the most of the available space behind the bumper by using a stepped core design that would rise up behind the entire front grille area. Using our experience in developing intercooler kits that integrate a replacement crash bar design, we were able to CNC machine billet brackets that allowed the intercooler to bolt in place. By doing so, the new intercooler offers a huge 143% increase in overall capacity in comparison to the original intercooler (54% bigger than our Stage 1 kit), and also features a colossal 121% increase in frontal area over standard (78% over our Stage 1), which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the Stage 3 AIRTEC Motorsport intercooler also features an enlarged 60mm inlet to match the outlet, and together the kit offers much greater efficiency and volume over both the standard and our Stage 1 intercoolers, which it proved during testing. Available in a high-quality powder coated black finish, the comprehensive kit is a direct replacement and comes complete with Pro Hoses silicone connectors to adapt to standard boost pipes – or you can choose our optional and hugely beneficial big boost pipe kit. It also comes complete with all fixtures and fittings, as well as detailed fitting instructions. A must have modification for those looking for only the very best for their modified Yaris GR models. The testingDuring track testing at Snetterton Circuit in the UK using our 420bhp AIRTEC Motorsport development car, we logged the inlet and outlet temperatures of both our Stage 1 and Stage 3 intercoolers back-to-back. The figures showed that at this high level of power, over the course of a hot lap the Stage 1 starts to fight maintaining a stable charge temperature, with a 15-degree range highlighting its battle against the high and sustained levels of boost pressure. However, with the Stage 3 intercooler fitted, the figures showed the larger core with increased air flow provided a much more consistent charge temperature throughout the test, highlighted with just a 5-degree range in temperature. Verdict: Both intercoolers demonstrate a high level of efficiency, reducing charge air temperature by over 200 degrees and equating to over 90% efficiency, but the Stage 3 could sustain that level for longer, which is crucial for highly tuned cars to run safely for extended periods of time. T1 – TEMPERATURE INT2 – TEMPERATURE OUT Dimensions:OEM intercoolerWidth: 645mmHeight: 145mmDepth: 80mmCapacity: 7.5 litresFrontal area: 9,353cm² AIRTEC Motorsport intercoolerWidth: 610mmHeight: 330mmDepth: 110mm to 70mm stepped coreCapacity: 18.2 litresFrontal area: 20,625cm²   Features: Specifically designed for the Yaris GR model Tried and tested to perform on heavily tuned cars 143% increase in overall capacity in comparison to original 121% increase in frontal area over standard Enlarged inlet pipe to 60mm Optional big boost pipe kit Huge increase in cooling ability Incorporated crash bar design High-flow, moulded one-piece cast end tanks Powder coated black finish Includes fittings and fixtures Detailed fitting guide included Please note, will not fit with AIRTEC Motorsport Oil Cooler (ATMSYGR04). NEW Stage 3 oil cooler – COMING SOON.

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Yaris GR models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight alloy and comes in a high quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Please note: The Stant quick release high-pressure cap displayed in the images is for illustration purposes only, as Stant caps are no longer available. We now supply a replacement quick release high-pressure cap in a similar style. Features Direct replacement header tank for the Yaris GR Lightweight aluminium construction High quality black powder coat finish  Sight glass to view coolant level Uprated high pressure cap included No drilling or cutting required All fixtures included as well as fitting instructions AIRTEC Part No: ATMSYGR10

Read more less

The Yaris GR is the new must-have hot-hatch and has already proven popular with enthusiasts eager to use their cars to their full potential. In order to ensure there is no noticeable loss in performance during extended periods of hard driving on road or track, AIRTEC Motorsport has developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. TECHNICAL DATA AIRTEC Motorsport Front Mount Intercooler for Toyota Yaris GR As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our intercooler upgrade suitable for track or fast road use. The Yaris GR is the new must-have hot-hatch and has already proven popular with enthusiasts eager to use their cars to their full potential. In order to ensure there is no noticeable loss in performance during extended periods of hard driving on road or track, AIRTEC Motorsport has developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance is based upon our stepped-core design to make the the most of the limited space available behind the bumper. The core steps from 110mm to 70mm and in doing so offers a huge 64% increase in overall capacity in comparison to the original intercooler. It also offers a 30% increase in frontal area over standard, which allows it to make the very most of the air flow provided. The inlet side of the intercooler retains a 50mm diameter to ensure minimal turbo lag whilst the outlet side increases to 60mm to offer less restriction. Together with our high-flow, moulded one-piece cast end tanks and an internal air diverter to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Despite this improvement, the kit fits neatly behind the original bumper and requires no trimming or cutting, and can be reverted back to standard with no issues. The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and Pro Hoses silicone connectors. The intercooler is available in a Pro-Series Black finish (with or without the AIRTEC logo) and gloss black Pro Hoses silicone connectors. Dimensions:Width: 610mm Height: 195mm Depth: 110mm/70mm Inlet: 50mm Outlet: 60mm   Registered Design Right number: 6154877 AIRTEC part no: ATINTYGR1

Read more less

PLEASE NOTE – THE UNDER TRAY IS NOT INCLUDED You will need to cut the original under tray to fit this product  TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our front cooling guide upgrade suitable for track or fast road use. The guide offers a simple solution to improving the transmission and transfer box’s cooling ability, which helps to ensure rising temperatures don’t cause any damage. How it worksWhen the oil inside the gearbox and transfer box gets hot, its ability to lubricate and protect both the gears and LSD is reduced. This is more likely to occur during extended periods of hard use, such as on track, so it is beneficial to stabilise and reduce temperatures in order to limit premature wear. The AIRTEC Motorsport cooling guide works by directing fast-flowing air passing underneath the car towards the gearbox and transfer box casings. By providing a sustained flow of fresh air to towards these items, their ability to withstand heat soak is increased, which therefore allows them to better control operating temperatures in comparison to standard. Available in a high-quality and durable powder coated red finish, the guide fits to the original undertray and comes complete with all the correct fixtures and fittings, as well as detailed instructions. PLEASE NOTE – THE UNDER TRAY IS NOT INCLUDED You will need to cut the original under tray to fit this product  Features: Directs a flow of fresh air to help cool the gearbox and transfer box casings Helps to reduce transmission running temperature Made from lightweight aluminium High-quality red powder coated finish Attaches to the original undertray AIRTEC Part No: ATMSYGR09

Read more less

AIRTEC MOTORSPORT REAR DIFFERENTIAL COOLER FOR TOYOTA YARIS GR Updated V2 Design – Now made from injection moulded plastic Available in a high-quality injection moulded plastic, the duct is a direct fitment that requires no additional drilling or cutting to fit, and comes complete with all the correct fixtures and fittings, as well as detailed instructions. AIRTEC Part No: ATMSYGR07   TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our updated Version 2 of the differential cooling duct upgrade suitable for track or fast road use. The duct offers a simple solution to improving the differential’s cooling ability, which helps to ensure rising temperatures don’t cause any damage. How it worksWhen the oil inside the differential gets hot, its ability to lubricate and protect both the gears and LSD is reduced. This is more likely to occur during extended periods of hard use, such as on track, so it is beneficial to stabilise and reduce temperatures in order to limit premature wear. The AIRTEC Motorsport cooling duct works by directing fast-flowing air passing underneath the car towards the differential’s cooling fins, which rely purely on air flow to shed heat effectively. By providing more sustained air flow to these fins, the differential’s cooling capacity and ability to withstand heat soak is increased, which therefore allows it to better control operating temperatures in comparison to standard. Our updated Version 2 design is made from high-quality, injection moulded plastic that is both lightweight and durable. Finished in red, the duct is a direct fitment that requires no additional drilling or cutting to fit, and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Features: Version 2 design made from injection moulded plastic Lightweight and durable construction Directs air flow to the differential’s cooling fins Helps to reduce differential running temperature Fits in place with no cutting or drilling required Can be fitted in under 30 minutes with no special tools required AIRTEC Part No: ATMSYGR07

Read more less

  Prestone Ready To Use Coolant/Antifreeze 1ltr (Can mix with any colour) Prestone Antifreeze is a high quality, universal coolant suitable for various vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features:> Prevents overheating during the summer, and avoids freezing during the winter Can be used in ANY Passenger vehicle (Petrol or Diesel) Can be mixed with ANY existing colour antifreeze 5 Year guarantee Prestone 4ltr Ready to use Universal Antifreeze Prestone Antifreeze is a high quality, universal coolant suitable for varius vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features: - Prevents overheating during the summer, and avoids freezing during the winter - Can be used in ANY Passenger vehicle (Petrol or Diesel) - Can be mixed with ANY existing colour antifreeze - 5 Year guarantee

Read more less

TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

Read more less

TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less