Performance - Toyota Yaris GR (2020-Present)

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the  Show Day Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK by CEUK, this lightweight and secure Stainless Steel prop is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets / doors / boots open, whether or not your vehicle has gas lift struts. Crafted from Air Grade Stainless Steel and featuring precision-machined billet aluminium components with stainless steel fixings; then finished in a coloured polyolefin coating, the Show Day Prop offers both functionality and a sleek, professional appearance. Shaft Made from Stainless Steel, the shaft is ultra-thin at just 6mm and lightweight, with no wrapping or skinning. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. Lower Fixing The lower fixing features a precision bend, with a rubber cap to prevent scratches or damage to the vehicle. Extendability: The upper fixing has a 4cm / 40mm extendable thread, which can be raised to give a longer prop. Sizing Length of Prop Section only: 500mm / 50cm Total length when fully extended: 570mm / 57cm Adjustment Capability when installed: 53cm / 57cm

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium under tray for the Yaris GR Gen 1 and Gen 2 models including automatics. The IssueThe original under tray on Gen 1 cars features no venting at all and is made from a weak fibre material construction which will be prone to failure over time. Gen 2 cars feature a plastic under tray but with a small single vent for the transfer case alone.  ConstructionOur solution to creating a direct replacement under tray began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points and fixings. Made in 2mm aluminium and finished in a high-quality black powder coat, our under tray offers an enhanced level of protection to the underside of the car but more importantly, the design has also been carefully considered to ensure improved cooling and air flow to the vital transmission components.  CoolingWhilst the Gen 1 under trays feature no cooling at all, the Gen 2 under trays feature a basic duct for the transfer case at the rear, as clearly Toyota see this as an area that requires cooling. The AIRTEC Motorsport under tray therefore utilises a much larger scoop for the rear to force more air flow and offer better cooling. It also features a built in gearbox cooling duct, together with a venting section behind it to create air flow to and from the transmission and reduce temperatures. The comprehensive design also features rear ventilation to allow heat to exit the undertray together with side vents to further improve air flow. ConclusionA simple yet effective upgrade that offers improved strength, durability and cooling effectiveness.   Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original Toyota fittings should only be reused if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from Toyota, as failure to do so may cause the under tray to work loose. Features: Direct replacement under tray for Yaris GR Gen 1 and Gen 2 (incl. Automatic) Improved cooling to vital transmission components Uses all original mounting points – no cutting or drilling required Created from 3D scan and CAD software for perfect fitment Made from 2mm aluminium for increased strength Comes in a durable black powder coat finish Uses existing fixtures and fittings   Registered Design Right number: Application Pending AIRTEC part no: ATMSYGR32

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport are proud to launch our Stage 3 oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Developed in-house at AIRTEC HQ in the UK, this is our biggest oil cooler kit to date offering a huge 117% increase in volume over our Stage 1 oil cooler kit. Spanning across the entire front grille area for maximum air flow, the comprehensive kit also features laser-cut aluminium ducting to force cold air through the cooler. This allows it to fit with our Stage 3 intercooler kit (our Stage 1 oil cooler does not fit with the Stage 3 intercooler) to create the ultimate cooling package. Designed to fit both auto and manual transmissions, the package includes a large AIRTEC Motorsport oil cooler with ducting, bespoke laser-cut and powder-coated brackets, high-quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. TESTED ON TRACKTried and tested on race tracks around Europe with our own 400+bhp Yaris GR, we were able to develop this package after battling with excessive oil temperatures when pushing hard for several fast laps in a row. As a result, our design engineers created a larger volume kit with carefully designed added ducting, which when tested created a huge improvement in sustaining safe oil operating temperatures no matter the climate, or period of driving. Key features: Suitable specifically for the Gen 2 Yaris GR – fits auto and manual transmissions Huge 117% increase in volume over our Stage 1 oil cooler Fits with our Stage 3 intercooler kit  to create the ultimate cooling package Full width oil cooler complete with cold air ducting Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions   AIRTEC part no: ATMSYGR31

Read more less

This is a performance enhancing turbo inlet pipe kit for the Toyota Yaris GR. Features Improved throttle response Cold air straight to the turbo charger Improved turbo response Enlarged diameter on the turbo elbow & silicone hose What Does It Do? This turbo inlet delivers increased air flow over the standard turbo inlets. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone hoses Black powder coated inlet pipe Fixing clamps and 2 x fitting bolts If you have any queries on product fitment then please contact us via 01793 296 344 or our live chat and one of our brand associates will be more than happy to assist. Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020-2025 Toyota Yaris (GR) 1.6 GR

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

As part of our expanding Toyota Yaris GR product range, we’ve developed an aluminium engine cover. This direct replacement part is easy to fit and smartens the appearance of the engine bay, whilst still allowing access to the oil filler cap and dipstick. Raised from the engine to help dissipate heat, the design also features additional venting at the rear, which is closest to the turbo.  Finished in a high-quality black powder coat for durability, the cover comes with all fixtures and fittings, as well as detailed installation instructions.  A simple and effective modification that can be fitted in minutes.  Registered Design Right: Application Pending  AIRTEC part no: ATMSYGR24

Read more less

Following an extensive development process, AIRTEC Motorsport are proud to launch our Stage 3 oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Developed in-house at AIRTEC HQ in the UK, this is our biggest oil cooler kit to date offering a huge 51% increase in volume over our Stage 1 oil cooler kit. Spanning across the entire front grille area for maximum air flow, the comprehensive kit also features laser-cut aluminium ducting to force cold air through the cooler. This allows it to fit with our Stage 3 intercooler kit (our Stage 1 oil cooler does not fit with the Stage 3 intercooler) to create the ultimate cooling package. The package includes a large AIRTEC Motorsport oil cooler with ducting, bespoke laser-cut and powder-coated brackets, high-quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. TESTED ON TRACKTried and tested on race tracks around Europe with our own 400+bhp Yaris GR, we were able to develop this package after battling with excessive oil temperatures when pushing hard for several fast laps in a row. As a result, our design engineers created a larger volume kit with carefully designed added ducting, which when tested created a huge improvement in sustaining safe oil operating temperatures no matter the climate, or period of driving. Key features: Designed and developed in the UK specifically for the Yaris GR Huge 51% increase in volume over our Stage 1 oil cooler Fits with our Stage 3 intercooler kit  to create the ultimate cooling package Full width oil cooler complete with cold air ducting Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSYGR14

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

Here we have a brand new product for the MK3.5 Focus including the ST/RS models. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Much thicker than other panels on the market and currently available in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. Carbon fibre, gloss black and textured panels are supplied ready to fit to the car. Fitment is straight forward and takes 15 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! The variances in the air conditioning piping has meant that we are offering this product with the option of a hole for the air conditioning pipe. Some of these pipes stick up further than others. If you opt not have the hole, this can result in a small gap (3-4mm) between the front of the headlight and the panel. We appreciate that some people will be happy with a small gap rather than a pipe sticking through slam panel (it looks cleaner without the hole). However, if you would prefer to have the hole we can drill this for you to order,  We can offer these painted or hydrodipped, please contact us for more details - support@ceuk.org

Read more less

  Here we have a brand new product for the pre-face lift MK3 Focus including the ST model. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Currently available to order in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. These panels have been designed for paint (smooth raw plastic) and are the only product on the market for this vehicle. Other finishes are ready to fit. These parts have been designed on a standard vehicle which has not suffered from any previous accident damage. Some adjustment may be needed to accommodate other after market parts inc aftermarket headlights. Fitment is straight forward and takes 25 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! Please note you will need to remove your bonnet sound pad to ensure it does not rub on the slam end panels. This is particularly relevant if you have selected the gloss black or carbon finished items. 

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A5/B5API SL, CF SUITABLE FOR: ACEA A1/B1 Chrysler MS-6395 Dacia Ford WSS-M2C913-D, Ford WSS-M2C913-C, Ford WSS-M2C913-B ILSAC GF-4 Jaguar Land Rover STJLR.03.5003 Renault RN0700 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-40 C3 is recommended for engines requiring a C3 5w40 viscosity targeting 'Pumpe Düse' PD Volkswagen Audi Group, GM and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Fiat 9.55535-T2, Fiat 9.55535-S2 Ford WSS-M2C917-A GM dexos 2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.51, MB 229.31 Porsche A40 PSA B71-2290 <2014 Renault RN0700 / RN0710 VW 502 00 / 505 01, VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 C3 is recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Chrysler MS-11106 Fiat 9.55535-S3 GM-LL-B-025, GM-LL-A-025 MB 229.51, MB 229.31 Porsche C30 VW 504 00 / 507 00, VW 506 00 / 506 01 VW 503 00 / 503 01, VW 502 00 / 505 01 VW 502 00 / 505 00 Asian manufacturers Millers Oils underwrites this product for GM dexos 2 applications

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines. APPLICATION: Millers Oils Trident Professional 5w-40 is recommended for engines requiring a 5w40 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A3/B4 ACEA A3/B3 API SN, SM, SL, CF SUITABLE FOR: BMW Longlife-01 BMW Longlife-98 Chrysler MS-12991 Fiat 9.55535-Z2, Fiat 9.55535-N2 Fiat 9.55535-M2, Fiat 9.55535-H2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.5, MB 229.3, MB 229.1 Porsche A40 PSA B71-2296 <2014, PSA B71-2295, PSA B71-2294 Renault RN0700 / RN0710 VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, semi synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines. APPLICATION: Millers Oils Trident Professional 5w-30 is recommended for engines requiring a 5w30 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A3/B4 ACEA A3/B3 API SL, CF SUITABLE FOR: BMW Longlife-01 BMW Longlife-98 Fiat 9.55535-G1 Ford WSS-M2C913-B Ford WSS-M2C913-A ILSAC GF-2 MB 229.5 MB 229.3 MB 229.1 PSA B71-2296 <2014, PSA B71-2295 PSA B71-2294 Renault RN0700 / RN0710 VW 502 00 / 505 00 VW 500 00 / 501 01 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional C5 5W-20 is recommended for engines requiring a C5 5w20 viscosity targeting Ford Eco-Boost engines and Jaguar Land Rover. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C5 API SN SUITABLE FOR: ACEA A1/B1 Chrysler MS-6395 Fiat 9.55535-CR1 Ford WSS-M2C948-B, Ford WSS-M2C948-A Ford WSS-M2C925-B, Ford WSS-M2C925-A ILSAC GF-5 Jaguar Land Rover STJLR.03.5004 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional C2/C3 5W-30 is recommended for engines requiring a C2 or C3 5w30 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C2/C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Fiat 9.55535-S3, Fiat 9.55535-S1 GM dexos 2 GM-LL-B-025, GM-LL-A-025 MB 229.52, MB 229.51, MB 229.31 PSA B71-2290 <2014 Renault RN0700 VW 502 00 / 505 01, VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, premium petrol engine oil formulated using the latest technology for use in petrol and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for OEM applications requiring a 5w30 viscosity, which provides protection against low speed pre-ignition (LSPI) and timing chain wear. Ideally suited for Opel Vauxhall and Asian manufactures including Lexus, Nissan, Suzuki and Toyota. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Delivers outstanding LSPI protection and ultimate in turbo charger care, even under the most extreme operating conditions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: API SP, SP RC GM dexos 1 Gen 2 ILSAC GF-6A SUITABLE FOR: API SN PLUS RC, SN PLUS, SN RC, SN Chrysler MS-6395 Fiat 9.55535-CR1 Ford WSS-M2C961-A1, Ford WSS-M2C946-B1 Ford WSS-M2C946-A, Ford WSS-M2C929-A GM dexos 1 Gen 1, GM 6094M, GM 4718M ILSAC GF-5, ILSAC GF-4 Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, mid SAPS, premium OEM approved engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for applications requiring C2 or C3 5w30 viscosities. Covering European manufacturers including BMW, Mercedes Benz and GM dexos 2 applications. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Specifically engineered to enhance engine cleanliness, delivering improved fuel economy, reduced emissions and extended service drain capability Complements and utilises latest mid SAPS technology protecting after treatment systems such as particulate filters, Selective Catalytic Reduction (SCR) and AdBlue delivering ultimate soot control and environmental protection Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) PERFORMANCE PROFILE: API SN ACEA C2/C3 BMW Longlife-04 (Approved) MB 229.52 (Approved), MB 229.51 Opel/Vauxhall OV0401547 (Approved) Renault RN0700 / RN0710 SUITABLE FOR: API CF Chrysler MS-11106 Fiat 9.55535-S3, Fiat 9.55535-S1 GM dexos 2, GM-LL-B-025, GM-LL-A-025 MB 229.31, MB 226.5 PSA  B71-2290 <2014 VW 502 00 / 505 01, VW 502 00 / 505 00 VW 500 00 / 501 01 Dacia Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, full SAPS, premium OEM engine oil formulated using the latest technology for use in petrol, diesel and hybrid engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for applications requiring a 0w40 viscosity, predominantly for use in Mercedes Benz, Mercedes Benz AMG powered vehicles, Porsche and Renault. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Specifically formulated for use in all hybrid systems including self-charging hybrid electric vehicles (HEV) and plug in hybrid electric vehicles (PHEV) Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA A3/B4 API SN Ford WSS-M2C937-A MB 229.5 Porsche A40 (Approved) Renault RN0700 / RN0710 SUITABLE FOR: ACEA A3/B3 API CF BMW Longlife-01, BMW Longlife-98 Chrysler MS-12633 (SRT), Chrysler MS-10725 Fiat 9.55535-Z2, Fiat 9.55535-M2 GM-LL-B-025, GM-LL-A-025 MB 229.3, MB 229.1 Volvo VCC 95200356 VW 502 00 / 505 00, VW 500 00 / 501 01 AMG SAAB Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, full SAPS, premium engine oil formulated using the latest technology for use in petrol and diesel engines. Millers Oils XF Premium is a range of fully synthetic engine oils featuring Dynamic Fluid Technology (DFT), specially designed to focus on maximising fuel economy whilst minimising engine wear. Dynamic Fluid Technology (DFT) is the unique, superior lubrication technology developed and blended by Millers Oils. APPLICATION: Recommended for OEM applications requiring a 5w50 viscosity, including Mercedes Benz AMG powered vehicles, Porsches, Caterhams and Fords including the Mustang. USER BENEFITS: Provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the engine from the very start of every journey Maximises viscosity stability at high temperatures, which reduces engine wear giving superior protection for components including pistons, rings, timing chain, bearings and valve lifters Delivers outstanding instant protection under hot and cold temperatures, whilst simultaneously reducing fuel consumption and lowering exhaust emissions Compatible for use with bio fuels, DFT provides exceptional performance and protection against deposits, sludge and engine wear PERFORMANCE PROFILE: ACEA A3/B4 API SN SUITABLE FOR: ACEA A3/B3 API SM, SL Ford WSS-M2C931-C MB 229.3, MB 229.1 Porsche A40 AMG Caterham Cosworth Asian manufacturers* * Asian manufacturers - including but not limited to Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic performance engine oil featuring NANODRIVE low friction technology for use in petrol and hybrid engines. EE Performance from Millers Oils is the “track day ready”, high performance engine oil range ideal for race track and on-road use. The range is specifically designed for vehicles that demand maximum engine performance. Using award-winning low-friction NANODRIVE technology and ester chemistry, EE Performance offers an improved formulation with significant reductions in friction and wear compared to EE Longlife and industry-standard formulations. APPLICATION: Recommended for vehicles requiring a 0w20 viscosity, covering a wide range of European and Asian manufacturers. FEATURES & BENEFITS: “Track day ready”, high performance oil; delivers maximum engine performance whilst meeting manufacturer’s specifications and recommended oil drain interval for on-road use Reduction in friction of up to 24% providing a reduction in wear of up to 25% compared to other 0w20 grades Increased engine power and torque from award winning NANODRIVE low friction technology and synthetic ester formulation Extended component life and reduced operating temperatures as a result of the instant lubrication provided by NANODRIVE low friction technology Maximised efficiency and MPG delivered from the combined low viscosity and low friction NANODRIVE formulation Covers a wide range of Asian/Japanese manufacturers including the latest petrol & petrol hybrid engine technology RECOMMENDED FOR: API SP, SP RC, SN PLUS RC, SN PLUS, SN RC, SN Chrysler MS-6395 Fiat 9.55535-CR1 Ford WSS-M2C962-A1, WSS-M2C947-B1, WSS-M2C947-A Vauxhall / Opel / GM dexos 1 Gen 2, GM dexos 1 Gen 1 Vauxhall / Opel / GM 6094M, GM 4718M ILSAC GF-6A, ILSAC GF-5, ILSAC GF-4 Asian manufacturers* * Including but not limited to Daihatsu, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki and Toyota

Read more less

This listing is for 1x 5L Barrel   A fully synthetic, mid SAPS (Sulphated Ash, Phosphorus & Sulphur) performance engine oil featuring NANODRIVE low friction technology for use in petrol, diesel and hybrid engines. EE Performance from Millers Oils is the “track day ready”, high performance engine oil range ideal for race track and on-road use. The range is specifically designed for vehicles that demand maximum engine performance. Using award-winning low-friction NANODRIVE technology and ester chemistry, EE Performance offers an improved formulation with significant reductions in friction and wear compared to EE Longlife and industry-standard formulations. APPLICATION: Recommended for vehicles requiring a C3 5w40 specification. Targeting ‘Pumpe Düse’ PD Volkswagen Audi Group (VAG) engines including Lamborghini, Seat, Skoda and Porsche. Other coverage includes GM and Mercedes Benz. FEATURES & BENEFITS: “Track day ready”, high performance oil; delivers maximum engine performance whilst meeting manufacturer’s specifications and recommended oil drain interval for on-road use Reduction in friction of up to 24% providing a reduction in wear of up to 25% compared to other 5w40 grades Increased engine power and torque from award winning NANODRIVE low friction technology and synthetic ester formulation Extended component life and reduced operating temperatures as a result of the instant lubrication provided by NANODRIVE low friction technology Latest mid SAPS technology protects both engines and after-treatment systems including particulate filters (DPF/GPF) and Selective Catalyst Reduction (SCR), delivering ultimate soot control and environmental protection RECOMMENDED FOR: ACEA C3 API SN, SM, SL, CF BMW Longlife-04 Chrysler MS-11106 Opel / Vauxhall GM dexos 2 Opel / Vauxhall GM-LL-B-025, GM-LL-A-025 Fiat 9.55535-GH2, Fiat 9.55535-T2, Fiat 9.55535-S2 Ford WSS M2C917-A Mercedes-Benz MB 229.52, MB 229.51, MB 229.31, MB 226.5 Opel / Vauxhall OV0401547 Porsche C40, Porsche A40 Renault RN0700 / RN0710 Audi / VW Group VW 511 00, VW 502 00 / 505 01, VW 502 00 / 505 00, VW 500 00 / 501 01 Asian manufacturers* * Including but not limited to Daihatsu, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki and Toyota

Read more less