Performance - Toyota Yaris GR (2020-Present)

Product Description Gains of 13bhp Peak torque gains of 8nm High quality carbon fibre Pleated performance air filter No engine management check lights (EML)  Increased air flow   Lifetime warranty* The Toyota Yaris GR has proven itself to be a fantastically capable vehicle since its release, and the development team at Forge Motorsport have been able to work their magic once again to find further improvements. After continued testing and discussions with owners of Yaris GR’s, the stock airbox has proven itself to function well, especially with the stock map. However, the weakness in the airbox is most definitely the quantity and directional flow of the air. As such, we explored several different avenues, before settling on a replacement upper airbox that mounts to the stock lower. When used in collaboration with the Forge Motorsport Inlet Duct (FMINLD1) performance car part, it ensures a consistent cold feed of air into the lower airbox that can then be delivered into a refined upper airbox. The increased diameter from 80mm of the stock inlet pipe to 89mm produces a volumetric increase of around 20% in just the connecting pipe from turbo inlet adapter to the airbox alone. After running data and tests it was decided that we would not use a panel filter, but instead a cone filter as shown in the CAD below. 3D scan data was utilised to ensure that the cone filter would fit in the optimum position inside the lower airbox, not just for ease of fitment but also to allow for optimum flow into the inlet tract. Due to the sensitivity of the MAF and stock map of the Yaris, a lot of testing was required to ensure that performance was gained without inflicting the driveability of the car - especially as we were changing from a panel filter to a cone filter and an increased diameter. To test this in real world conditions, we created a modular design that was 3D printed and allowed for different variations of MAF position, diameter, and airflow to be tested on road and the dyno. After finding the optimum design, we then reprinted the full prototype and left this on the vehicle. This allowed us to continue our testing to prove out the performance repeatability in real world driving conditions. We also noted at this stage that there is a small gain in induction noise. This product works extremely well when collaborated with existing Forge Motorsport performance products for the Toyota Yaris GR. With the release of our turbo inlet adapter (FMTIA8) we were able to increase the volumetric capacity over the stock inlet by 53%. Once coupled to this intake we have been able to ensure a smooth airflow from filter to turbo with minimal restrictions by continuing the 89mm diameter for a large proportion of the inlet tract. It is designed in a similar way to a conventional velocity stack by routing the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. This can have a positive effect on acceleration after long deceleration or in between gear changes due to more air being kept within the intake system. FMINDK43 is part of our acclaimed Hi Flow range and will ensure that your vehicle is getting critical cold air.  Not only are Forge Motorsport performance parts a better option for an improved drive, but carbon fibre car parts really help give an engine bay some character. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. Dyno Results We found that FMINDK43 with the stock turbo inlet produced peak gains on average of 13bhp at the wheels and peak torque gains of 8nm. The dyno graph below shows a comparison between the stock airbox, the 80mm prototype and 89mm prototype. We ran a total of 8 different prototype variations of MAF height, MAF distance from entry and inlet diameter to ensure that the best solution was used. You can see how sticking to the stock size diameter and MAF position with the cone filter produced a slight improvement to the wheel horsepower, however when increased to 89mm we were able to produce some fantastic gains from such an easy to install bolt on modification. Another important observation to note is where the power is delivered. As you can clearly see on the dyno graph that the engine produces a much higher power earlier into the rev range. From 2000rpm to 3600rpm the lower flap in the airbox is opened via a solenoid, and the dyno graph shows that at the same rpm there is an increase of around 15- 20nm of torque with FMINDK43 installed compared to stock. This figure is noticeable when driving, and you can feel that the vehicle picks up much better than in stock form. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power as they will be able to utilise the increase of airflow. The performance part kit comes complete with everything you need for installation, which can be carried out in around half an hour, including a set of full colour instructions. Our Toyota Yaris GR performance parts will help improve both the look and drive of your car. *Please note - the filter is excluded from the Forge lifetime warranty   

Read more less

This is a performance enhancing induction kit for the Toyota Yaris GR. Features Improved throttle response Roto-Molded Polyethylene black heat shield Red Powdercoated Intake Pipe Dyno results: max gains 14-16bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Red Powdercoated Intake Hose Red pleated filter Silicone joiner Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020-2025 Toyota Yaris (GR) 1.6 GR

Read more less

This is a performance enhancing turbo inlet pipe kit for the Toyota Yaris GR. Features Improved throttle response Cold air straight to the turbo charger Improved turbo response Enlarged diameter on the turbo elbow & silicone hose What Does It Do? This turbo inlet delivers increased air flow over the standard turbo inlets. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone hoses Black powder coated inlet pipe Fixing clamps and 2 x fitting bolts If you have any queries on product fitment then please contact us via 01793 296 344 or our live chat and one of our brand associates will be more than happy to assist. Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020-2025 Toyota Yaris (GR) 1.6 GR

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our direct replacement panel air filter and intake pipe upgrade for the FK2 Civic Type R model, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a simple yet effective solution to improving the car’s original air intake system to allow more flow, whilst improving response. Featuring a freer-flowing panel filter that fits inside the original air box, as well as an optional accompanying Pro Hoses silicone intake pipe, the kit offers a valuable improvement over standard. The result is increased power and improved throttle response. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Features: Simple and effective upgrade designed especially for the Yaris GR platform Fits inside original air box for an improvement over standard Optional freer-flowing Pro Hoses intake pipe Improved throttle response Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATIKYGR05

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:80mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This performance intake kit is designed to fit Toyota Yaris GR models from 2020 to 2023 with the 1.6L turbocharged petrol engines. Features Improves performance and throttle response Lightweight carbon fibre lid Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: Black powder coated heat shield Carbon fibre lid Ramair foam air filter Black silicone hose CNC MAF housing Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020-2025 Toyota Yaris (GR) 1.6 GR

Read more less

Description This is a replacement panel filter for the Toyota Yaris & Corolla 1.6 GR 2020+. For full list of fitments see compatibility chart. Features High Performance, MAF Safe, twin layer, fully reticulated foam Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using our filter maintenance kit - CK-003 Stainless steel cage support structure Guaranteed surface area using high quality custom blended polymer What Does It Do? The Ramair Panel Filter range is made from twin core Ramair Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with longevity in mind. These filters are direct replacements for the OEM air filter in your car, making this filter easy to fit and maintain. Ramair twin core foam is unique and like no other in the market. Our foam is designed to give maximum dust filtration along with optimum performance. Filter Length: 244mm Filter Width: 223mm Filter Shape: Rectangle Filter Material: 15mm Dual Layer Foam Fitment Compatibility Chart This product fits the following: MAKE MODEL ENGINE YEAR Toyota Corolla 1.6 GR 4WD 2023+ Toyota Yaris 1.6 GR 4WD 2020+

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

As part of our expanding Toyota platform product range, AIRTEC Motorsport is proud to launch our carbon fibre air feed for the Yaris GR suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a simple yet effective solution to improving the amount of fresh air directed towards our AIRTEC Motorsport induction kit (or any other aftermarket induction kit/intake that requires the original intake to be removed). Made in real carbon fibre with a gloss lacquered finish and AIRTEC aluminium plaque, the air feed also introduces a quality look and feel to the engine bay. The air feed is a direct replacement that requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Features: Air intake designed specifically for Yaris GR platform Feeds fresh air to an aftermarket induction kit/intake Lightweight carbon fibre construction High quality gloss lacquered finish Includes all fixtures, fittings and instructions AIRTEC Part No: ATMSYGR11

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport are proud to launch our Yaris GR Rear Turbo Pipe suitable for track or fast road use. Made from high quality silicone, the Pro Hoses pipe maintains a constant internal diameter throughout its length, compared to the original item which narrows and compresses at points causing restrictions to the flow and capacity. Our direct replacement pipe features a simpler, freer flowing design without these performance reducing restrictions. The comprehensive kit includes a billet hose connector and jubilee clips, which makes installation a simple task. Specification: Larger overall capacity and freer-flowing design Improvement in response and sound Direct replacement fitment High quality Pro Hoses silicone pipe Billet aluminium connector Includes jubilee clips Features detailed fitting guide

Read more less

As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Carbon Fibre Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. Having previously designed a shielded induction kit for the Yaris GR model, we were keen to develop a more extensive intake package to offer further improvements. Using our experience from developing and producing our WRC-inspired Closed Air Induction System (CAIS) for the Focus RS that is proven to dramatically increase power and torque, we embarked on developing an entire replacement air box carefully moulded to our design in a lightweight carbon fibre material to help thermal efficiency. Sealed inside is a large Group-A style cotton air filter that draws fresh air solely from the front intake, ensuring minimal heat soak issues and the lowest possible intake temperatures. Our design also features a replacement MAF housing and rear intake pipe, both 80mm in diameter and finished in black powder-coated finish. The kit comes complete with high quality Pro Hoses silicone connectors, as well as all fixtures and fittings required for a simple installation. The kit is a direct replacement that comes complete pre-built and ready to install. It requires no additional drilling or cutting to fit and comes with detailed fitting instructions.   DYNO TESTEDDeveloped on our own comprehensively modified AIRTEC Motorsport Yaris GR, with the Closed Air Induction System the car produced 335bhp, 5hp more than our open filter induction kit, whilst our thermal imaging camera showed it continued to repel heat build-up from the local area.  Overall, the result is a complete kit that offers increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay that is perfectly suited to the GR. Tegiwa Imports Air Intake Test.Vehicle fitted with aftermarket cat back and GPF delete, plus upgraded panel filter. Stock GR Yaris Air Box – Dyno Power 277BHP / 272.2 FT LBS AIRTEC Motorsport Enclosed CAIS – Dyno Power 289.3BHP / 275.9 FT.LBS 12.3BHP gain over stock. Features: Comprehensive intake kit Enclosed air box ensures the lowest intake temperatures Front intake directs constant feed of cold air to the filter Large cotton air filter for improved flow and increased performance Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish on all aluminium hard pipes Lightweight carbon fibre air box Includes all fixtures and fittings

Read more less

Product Description After discussions with many GR Yaris owners about airbox modifications, Forge Motorsport are proud to release the Toyota Yaris GR Inlet Duct. The Forge inlet duct allows you to add an aesthetically pleasing carbon fibre part to your Yaris GR’s engine bay and help keep your inlet temperatures down during spirited driving and whilst on the track or rally stage.    By utilising 3D scans and SolidWorks CAD, our development team have been able to optimise the size of the inlet duct, creating an increase in uninterrupted cold air to be scooped into the stock airbox. 3D printed test parts were used alongside CAD simulation to ensure the optimum size and geometry. This inlet duct performance car part is much larger than stock with a close fit to the front bumper and airbox to ensure that the heat from the engine causes minimal effect. During testing on track days, the original duct caused inlet air temperatures to be heavily influenced by heat soak and fluctuated dramatically. Meanwhile the Forge inlet duct kept the inlet air temperatures not only reduced but at a more consistent temperature. A reduced consistent temperature is of great importance because any high temperature peaks will cause the ECU to retard the ignition and reduce the power you have available. The Forge inlet duct design incorporates a free-flowing path to both the upper and lower opening of the airbox, whereas the stock design has no flow management to the lower opening and the upper is small and not fully sealed. It is worth understanding that the lower opening is of far greater importance to the performance of your Yaris GR. There is a vacuum operated flap which is activated when under full throttle conditions, therefore the Forge Motorsport Inlet Duct ensures that your Yaris is getting colder directed air when the engine needs it the most. Data was collated and logged live by a passenger on a track day running in conjunction with an aftermarket intercooler on a 5 lap open pit session back to back against the stock inlet scoop (another 5 lap session). Inlet air temps had been reduced from 42°C to between 35 and 36°C. We even saw temperatures of up to 45°C on the stock duct. Fluctuation between temperatures on the stock inlet duct were greatly improved when air was fed to the secondary inlet scoop via the composite Forge Motorsport inlet feed. Please browse our Toyota Yaris GR performance parts today for other products in addition to this GR Yaris induction kit which you can fit to improve your track/rally experience. A Forge induction kit will unleash the power of your vehicle and help your engine breath. A recirculating or dump valve will be solution to the many failures that have occurred on the OEM part. With the OEM design including open sections, baffles, and noise restrictors to disrupt the airflow, the inlet duct is part of our acclaimed Hi Flow range and will ensure that your Yaris is getting critical cold air. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the engine bay some character. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.      

Read more less

Large Group A style cotton air filter, to fit multiple different applications. Fits the following models: Focus Mk2 RS Group A induction kit Focus Mk3 RS Stage 2 induction kit Focus Mk3 ST250 Stage 2 induction kit Toyota Yaris GR TRUMPET NOT INCLUDED Part no: ATIKFIL1

Read more less

As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. AIRTEC Part No: ATIKYGR02 TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. Having previously designed a shielded induction kit for the Yaris GR model, we were keen to develop a more extensive intake package to offer further improvements. Using our experience from developing and producing our WRC-inspired Closed Air Induction System (CAIS) for the Focus RS that is proven to dramatically increase power and torque, we embarked on developing an entire replacement air box carefully moulded to our design in a GRP composite material to help thermal efficiency. Sealed inside is a large Group-A style cotton air filter that draws fresh air solely from the front intake, ensuring minimal heat soak issues and the lowest possible intake temperatures. Our design also features a replacement MAF housing and rear intake pipe, both 80mm in diameter and finished in black powder-coated finish. The kit comes complete with high quality Pro Hoses silicone connectors, as well as all fixtures and fittings required for a simple installation. The kit is a direct replacement that comes complete pre-built and ready to install. It requires no additional drilling or cutting to fit and comes with detailed fitting instructions.   DYNO TESTEDDeveloped on our own comprehensively modified AIRTEC Motorsport Yaris GR, with the Closed Air Induction System the car produced 335bhp, 5hp more than our open filter induction kit, whilst our thermal imaging camera showed it continued to repel heat build-up from the local area.  Overall, the result is a complete kit that offers increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay that is perfectly suited to the GR. Features: Comprehensive intake kit Enclosed air box ensures the lowest intake temperatures Front intake directs constant feed of cold air to the filter Large cotton air filter for improved flow and increased performance Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish on all alloy hard pipes Grp body painted in high gloss black finish Includes all fixtures and fittings AIRTEC Part No: ATIKYGR02

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit Crankcase oil breather filter made in the UK. Our material wont breakdown under use and there is no cheap chrome parts to go rusty under you engine bay. Comes complete with clip for attachment. Also because of its unique flexible structure it can fit in pretty much any location no matter how tight! Clean using our filter maintenance kit - CK-003   Internal Neck Diameter (mm) Overall Filter Height (mm) Over Outer Diameter (mm) Material Unit Quanity You Choose 68 48 60 PPI Foam / Polymer Neck 1

Read more less

Ramair filters owe much of their dirt retaining properties to the unique advanced polymer treatment with which they are impregnated during manufacture. They can be given a new lease of life when they become heavily soiled by cleaning them thoroughly with Ramair polymer solvent cleaner and applying fresh Treatment to the foam filter material. Please Note: Ramair Filters Treatment is more advanced than ordinary filter oil. Using any other product may reduce the effectiveness of your filter and may affect the warranty. Ramair polymer solvent cleaner is: NON TOXICNON-CORROSIVE100% ORGANICBIODEGRADABLE Economy cleaning kit (CK-001) includes 1x 100ml cleaner, 1x 100ml Ramair advanced treatment in bottles, set of rubber gloves and instructions on cleaning and best re-application.

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Product Details - RP-104 Race Pod AirFilter Universal    Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RPfilters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-104 65mm 95mm 137mm 15mm Image is for illustration, you are purchasing a single filter with the specified dimensions. -------------------------------------- Product Details - RP-105 Race Pod AirFilter Universal    Heavily used in F3 racing cars. Each filterhas a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-105 54mm 75mm 280mm 30mm Image is for illustration, you are purchasing a single filter with the specified dimensions. ----------------------------------  Product Details - RP-106 Race Pod Air Filter Universal                        Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled.   The filter is specially strengthened using a stainless steel internal mesh, which we have developed & used in European and world touring cars!   With its large size, technologically advanced filter is capable of handling great flow rates. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-106 84mm 130mm 105mm 15mm ---------------------------- Product Details - RP-108 Race Pod AirFilter Universal    Heavily used in F3 racing cars. Each filterhas a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine.Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-108 63mm 81mm 250mm 30mm Image is for illustration, you are purchasing a single filter with the specified dimensions. ------------- Product Details - RP-110 Race Pod Air Filter Universal    Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-110 65mm 90mm 522mm 30mm ----------------------- Product Details - RP-111 Race Pod Air Filter Universal    Heavily used in F3 racing cars but owing to their design now being used in a variety of applications. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003  Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-111 65mm 90mm 286mm 30mm -------------------------- Product Details - RP-113 Race Pod Air Filter Universal    Heavily used in F3 racing cars. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-113 65mm 90mm 294mm 30mm -------------- Product Details - RP-114 Race Pod Air Filter Universal    Heavily used in F3 racing cars but owing to their design now being used in a variety of applications. Each filter has a internal stainless steel cage and a flexible, clampable neck. All RP filters have a foam top, which ensures maximum air availability to your engine. Filters come with clamp and ready oiled. Easy to clean using our filter maintance kit - CK-003 Part Number Neck Diameter Overall Diameter Filter Body Length Rubber Neck Length RP-114 65mm 90mm 590mm 30mm

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: 70mm Filter Neck Length: 14mm Filter Overall Height: 208mm Filter Base Width: 180x102mm Filter Top Width: 185x105mm Filter Material: 15mm Dual Layer Foam

Read more less