PERFORMANCE - VOLKSWAGEN TIGUAN MK1 2007-2016

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

Product Description 70mm I/D Rubber Neck Open Cone Air Filter - High flow construction and increased surface area Replaces the filter in the following kits - FMINDK5- Ford Fiesta 1.0 Ecoboost induction kit FMINDST180- Ford Fiesta ST180 induction kit FMINDASTG - Astra G induction kit *Please note - this filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.

Read more less

Forge has developed this turbo outlet muffler delete pipe for the 177hp 2.0 petrol turbo (TSI) It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part. This product fits:AudiA32.0 FSiTQ32.0 TSI (2011-2014)2.0 TSI (2015-2018)TTMk22.0SeatLeonMk2 2005-2012Cupra 2.0 TFSiSkodaKodiaq2.0L 2016-Octavia2.0 FSiT2.0L  VolkswagenBeetle2013 2.0EOSGolfMK6GTIPassat2.0 FSiTPoloGTI 2.0 2018-2020 AW ChassisScirocco 2.0 up to 2016Tiguan2.0 TSI 2017 Onwards 2.0 FSiT     To confirm compatibility, we have found that this will fit the vehicles that have a MAF sensor in the intake pipe as illustrated below. We recommend that you give yourself 2-3 hours to install this Forge Product   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Yet another first for the Volkswagen and Audi Tuning Market from Forge! With the introduction of the VAG 1.4 litre TSi Turbo/Supercharged Engine, we have developed an Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with complexities of this engine. Please choose from a black or silver adaptor using the options above.   In The Box:1 x FMDV14TSI Adaptor2 x M6 x 35 Socket Cap Bolts5 x M6 Washers1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS: AudiA1A1 (8X) 2010-20181.4 TwinchargedA31.4 TwinchargedSkodaFabia5J 2007-20141.4 TSI VRSVolkswagenEOSGolfMK51.4 S/ChargeMK61.4 TwinchargedPolo 1.4 GTIScirocco1.4 Twincharged 160Tiguan1.4 TSI Mk1

Read more less

This replacement adjustable sideshifter will allow you to shorten the side to side movement of your gear shift in order to obtain the optimum shifting times required for performance driving . You can personally customise the lateral movement to suit your own preference due to an infinitely adjustable pivot mechanism. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit all VAG 6 speed gear boxes as found in the vehicles listed in the 'compatible vehicles' tab above. (Please note: this does not fit the Skoda Fabia/VW Polo/Seat Ibiza/1.9 diesel applications) Up to and including 2007 models, the original side to side shifting mechanism on these vehicles should be made of metal with the 2008 and onwards models having the original side to side mechanism made of plastic. (on all models the throw or front to back mechanism is made of metal ) We supply within the kit the necessary parts to allow fitment to both types. Please note: To ensure that this product functions correctly and does not stress associated components, it is essential that the linkage cables are re-adjusted after the installation of this product, as per the fitting instructions.   In The Box:1 x FMVWSQS Shifter1 x 8.0mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut2 x Top Hat Bush1 x Push On Bush2 x Side Clips1 x Bag of Grease1 x Instructions1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES AudiA31.8 TFSi1.8T2.0 FSiTDieselS31.8T (8L Chassis)2.0 FSiT (8P Chassis)2.0 TSI (8V Chassis)TTMk1150/180BHP210/225BHPMk22.0DieselTTSMk3 8S (2014-2021)SeatLeonMk1 1998-2005Cupra 1.8TCupra R 1.8TMk2 2005-2012Cupra 2.0 TFSiSkodaOctavia1.8T2.0 FSiTDieselVolkswagenBora (1998-2005)EOSGolfMK41.8TDieselR32MK5DieselED30GTIR32MK6ED35GTIRMK7GTIGTI Clubsport ED40RMK7.5GTI RJettaMK7 (2018-2021)2.0 GLIMK7.5 (2021-)2.0 GLIPassat1.8T2.0 FSiTSciroccoRTiguan 2.0 FSiT

Read more less

6 Speed Adjustable Quick Shifter for Audi, VW, SEAT, and Skoda This quickshifter, once installed, will allow you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving. You can personally customise the throw to suit your own preference, due to an infinitely adjustable pivot mechanism. This wide range of adjustment should allow for adjustment from stock to a 40% decrease in shifter throw. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit all VAG 6 speed gear boxes as found in the 'compatible vehicles' tab above. This product is supplied with two sizes of pin, and one ball fitment, to ensure that it will match the various possible cables found on these vehicles. To ensure that this product functions correctly and does not stress associated components, it is essential that the linkage cables are re-adjusted after the installation of this product, as per the fitting instructions. Please note: This does not fit the Skoda Fabia/VW Polo/SEAT Ibiza/1.9 diesel applications.    In The Box:1 x FMVWQS Shifter1 x 8.4mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut1 x Bent Nail1 x Bag of Grease1 x Instructions1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. For Multiple Cars AudiA3  1.8 TFSi  1.8T  2.0 FSiT  DieselS3  1.8T (8L Chassis)  2.0 FSiT (8P Chassis)  2.0 TSI (8V Chassis)TT  Mk1     150/180BHP      210/225BHP  Mk2      2.0     DieselMk3    2.0 TSI 2015 OnwardsCupra   Ateca 2.0 TSISeat   Altea        Leon          Mk1 1998-2005           Cupra 1.8T           Cupra R 1.8T        Mk2 2005-2012           Cupra 2.0 TFSi           Diesel        Mk3 2012-2020        Cupra 280/290/300RSkoda Octavia     1.8T     2.0 FSiT     DieselVolkswagen Bora (1998-2005)      EOSGolf      MK4       1.8T       Diesel       R32      MK5        Diesel        ED30        GTI        R32   MK6      1.4 Turbo      ED35      GTI      R  MK7      GTI      GTI Clubsport ED40      R  MK7.5     GTI      RJetta     MK7 (2018-2021)      2.0 GLI      MK7.5 (2021-)      2.0 GLIPassat     1.8T     2.0 FSiT  Scirocco     R     2.0 up to 2016Tiguan     2.0 FSiT

Read more less

Adjustable Actuator for Subaru IHI VF35/VF34 Turbo GDB - However, this is not suitable for spec C. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC2SUB Actuator1 x Forge Sticker fits: AudiA32.0 FSiTTTMk22.0SeatLeonMk2 2005-2012Cupra 2.0 TFSiSkodaOctavia2.0 FSiTVolkswagenEOSGolfMK5GTIPassat2.0 FSiTTiguan 2.0 FSiT   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport are proud to offer the latest evolution of our popular direct turbo mounting valve for selected petrol turbocharged VAG engines.  Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)Unique slots machined in the body of the valve allows for a more effective and quicker release of air, due to larger surface areaNew and unique sound for the atmospheric modelBillet construction from aerospace grade aluminiumNo fault codes and no check engine lightsFull instructions and all parts necessary for installation included Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.  This valve represents the latest evolution of part number FMFSITAT, and is a hybrid of sorts, that combines our existing full replacement solenoid controlled recirculating valve with our blow-off valve adapter. The result is a full replacement atmospheric blow-off valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement recirculating valve option, the FMFSITVR, the FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location. The FMFSITAT valve has a much shorter overall installed height, which enables fitment of this atmospheric valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products. Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB   In The Box:1 x FMFSITAT Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x PCV Adaptor Kit1 x Blue Spring (Uprated)10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x Instruction Booklet1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below. If you are unsure if this product is suitable for your application, please contact us.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Forge Motorsport are proud to offer the latest evolution of our popular direct turbo mounting valve for selected petrol turbocharged VAG engines At a glance: Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)Billet construction from aerospace grade aluminiumNo fault codes and no check engine lightsFull instructions and all parts necessary for installation included Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi. This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location. The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products. Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB   In The Box:1 x FMFSITVR Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x PCV Adaptor Kit1 x Blue Spring (Uprated)10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x Instruction Booklet1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below. If you are unsure if this product is suitable for your application, please contact us.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits All Vehicles

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The oil filter housing on modern VAG engines does not allow for the previously common takeoff plates to fit under the filter and divert oil into an oil cooler mounted elsewhere on the vehicle. Instead they now use a oil to water cooling ‘block’ bolted to the front of the engine, and in many cases an undersize filter, or a paper drop in element, which prevents easy fitting of an oil cooler. As many people have found, if the vehicle is tuned, or if it is towing a heavy load, oil temperatures can rocket, with oil temperatures over 120°C (250°F) being easily achieved, which is close to the point that engine oil starts to break down. The Forge Motorsport FMOC2 replaces the oil to water cooling block, and although it still allows coolant to circulate, it more importantly gives two M22 takeoffs which, when fitted with the appropriate adaptor, allow fitment of oil cooler lines between an -6 and an -10 in size which can then be attached to an external oil cooler. Oil temperatures are stabilised, and engines can be worked harder for longer. To confirm fitment, please check the list of compatible vehilces below. This plate replaces the VAG OEM Part No. 03L 117 021 C. It fits ALL of the 2.0TDi and 1.6 TDi engines in the vehicles listed below. VW 2010-on Amarok, 2012-on Beetle, 2010-on Caddy, 2012-on CC, 2012-on Crafter, 2011-2016 Eos, 2012-on Golf Cabriolet, 2009-on Golf, 2009-2014 Golf Plus, 2011-on Jetta, 2011-on Passat, 2010-on Polo, 2009-on Scirocco, 2008-on Tiguan, 2011-on Touran, and 2010-on Transporter Audi 2011-on A1, 2009-2013 A3, 2008-on A4, 2012-on A5, 2011-on A6, 2012-on Q3, 2009-on Q5, and 2011-on TT Skoda 2011-on Fabia, 2009-on Octavia, 2012-on Rapid, 2011-on Roomster, 2008-on Superb, and 2010-on Yeti Seat 2011-on Alhambra, 2007-on Altea, 2009-on Exeo, 2009-on Ibiza, 2011-on Leon, and 2013-on Tolde   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Cars

Read more less

Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. If you are finding that the valve is dumping more than required, or if you are losing boost pressure it is normally an indication that a stronger spring is required. Alternatively, if the valve is failing to dump it may be necessary to install a weaker spring. Please note that fitting a stronger spring into a valve will not increase boost pressure, unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is too strong, may cause damage to the turbocharger. Please also note that the red coded springs should not be installed in the DVR or DV007 diaphragm valves.  Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI.*The above figures are estimates only and should only be considered as a guideline* Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation of this product.  Please contact us if you are uncertain whether this kit is suitable for your valve. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES 

Read more less

The Forge UNOS boost controller is a ball and spring CNC machined to aircraft grade specifications and incorporates a ratchet type top adjuster that will allow for the positive and precise adjustment that your driving style demands. The controller can be dash or engine bay mounted to suit your preference. This product is a universal component, and as such, no vehicle-specific fitting instructions can be provided. This product is designed and built with the intent of increasing the boost output of any forced induction system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Forge Motorsport nor any of it’s Authorized Distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment.   In The Box:1 x FMUNOS Boost Controller1 x Uprated Unos Spring2 x Unos Brackets2 x M4 x 8 Socket Cap Bolts1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!These CNC machined precision alloy wheel spacers are 8 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 8mm spacer will give an overall track increase of 16mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not suppliedPlease note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less