PERFORMANCE - VOLKSWAGEN TIGUAN MK2 (5N) 2016-2024

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the  Show Day Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK by CEUK, this lightweight and secure Stainless Steel prop is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets / doors / boots open, whether or not your vehicle has gas lift struts. Crafted from Air Grade Stainless Steel and featuring precision-machined billet aluminium components with stainless steel fixings; then finished in a coloured polyolefin coating, the Show Day Prop offers both functionality and a sleek, professional appearance. Shaft Made from Stainless Steel, the shaft is ultra-thin at just 6mm and lightweight, with no wrapping or skinning. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. Lower Fixing The lower fixing features a precision bend, with a rubber cap to prevent scratches or damage to the vehicle. Extendability: The upper fixing has a 4cm / 40mm extendable thread, which can be raised to give a longer prop. Sizing Length of Prop Section only: 500mm / 50cm Total length when fully extended: 570mm / 57cm Adjustment Capability when installed: 53cm / 57cm

Read more less

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

Purpose-designed for the 2.0 TSI MQB 'Evo' engine, this is the largest-volume intercooler available for this platform. What it does.The factory intercooler on the 2.0 TSI MQB 'Evo' has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System uses a huge 70mm core to give a 96% volume increase over the factory cooler - making it the largest volume and best performing intercooler upgrade on offer for the 2.0 TSI gen.4. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.  Increased 70mm inlet and outlet sizes allow for higher flow versus the 60mm factory outlets, with matching Boost Hoses provided with the intercooler kit. Unlike most aftermarket intercoolers listed for the MQB 'Evo' platform, ours has been designed exclusively for the 2.0 TSI Gen.4 from the ground-up. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a 70mm high-speed core using extra tall internal tubes for maximum boost flow and a massive 96% increase in volume. BOOST HOSES INCLUDED Internally-wired OEM fitment 70mm boost hoses are included, multi-ply to resist heat deformation and burst pressure. Supplied with stainless steel Mikalor-brand clamps. FLOWED END TANKS Cast construction end tanks for minimal turbulence and restriction use internal flow guides to divert airflow up and down across the entire core depth, with enlarged 70mm inlet & outlet. Confirmed applications. 2.0 TSI MQB Evo / EA888 Gen 4 engines only VWR141000 > VW Golf 8 & 8.5 GTI 2020+ > VW Golf 8 & 8.5 GTI Clubsport 2020+ > VW Golf 8 & 8.5 R 2020+ > VW Arteon 2.0 TSI EA888.4 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI EA888.4 2021+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+ > Audi A3 2.0 TSI 8Y & 8Y.2 2020+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Audi SQ2 (facelift EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+ > Cupra Leon 4 & 4.5 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia 4 & 4.5 vRS 2.0 TSI 245ps NX 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+   Precision Engineered forPerfect Performance. Giant core volume of 19,404,000mm³ vs 9,895,200mm³ for the factory cooler core Internal flow guides to optimise internal air flow via cast end-tanks Sophisticated 'Plate & Bar' construction outperforms the cheaper, less-effective 'Tube & Fin' construction Multi-ply, reinforced Boost Hoses are moulded with internal steps to maximise laminar airflow Intercooler outlets are 70mm vs 60mm for the OE cooler for increased flow Intercooler Performance.It's all about air intake temperatures. The OEM factory intercooler on the 2.0 TSI MQB 'Evo' struggles with containing the all-important air intake temperatures, especially once power is upgraded. So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour. With a 70mm core-depth (vs 60-65mm for most other aftermarket intercoolers) and giant internal volume, the RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run. Intercooler fitment. To accommodate the giant size of the RacingLine Intercooler, some light trimming of the black plastic radiator carrier is required.   This trimming is minimal on popular models such as the Golf mk8, but more may be required on some other MQB 'Evo' models.   For reference, fitment is designed for radiator carrier –  VW Part No. / 5H0 805 588 J

Read more less

This is a performance enhancing air scoop for the MK8 Golf GTI EA888 EVO 4 engine. Features Can be be fitted in conjunction with the factory air intake system Perfect when installed alongside with our MST Performance Intake System More pronounced intake sound Features twin air tunnels instead of just one on the factory system What Does It Do? This performance air intake scoop delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated intake scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2021 Audi A3 (8V) 1.8 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2020-2025 VW Golf R (MK8) 2.0 TSI 2022-2025 Skoda Superb (MK3) 2.0 TSI 2020-2025 VW Tiguan R (AD/BW) 2.0 TSI

Read more less

Product Description Highlights: UV, temperature, and water-resistant Designed to locate in the OEM factory position Finished in high quality clear coat to ensure UV-protection and extra durability Take an already incredible vehicle, pop the bonnet and view the engine with no cover in place, yeah, its bit of an anti-climax. This is how many owners feel when showing off there EA888 Gen 4 engine as unfortunately the VAG group have recalled the engine covers due to a potential fire risk leaving the engine looking unfinished and disappointing, For those reasons, we took the OEM engine cover and improved it. Our cover fits on the original mounting locations, is water-resistant, and takes each heat cycle of the engine with ease. Not only that, it's finished in high quality clear coat to ensure UV-protection and extra durability.   Compatable Vehicles: Audi S3 2.0TSI (8Y Chassis) TT 45 TFSI (8S) TTS Mk3 8S 316bhp (late 2022-) Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Skoda Kodiaq RS 2021- Octavia 4 RS Volkswagen Arteon 2.0 TSI Golf MK8 Clubsport 45 GTI R T-Roc R (2022 Onwards) Tiguan R 2022 Onwards (Gen 4)   It fits perfectly with the Forge carbon intake and Forge turbo inlet pipe solution, which as a trio will completely transform your car engine bay! It is almost guaranteed that you will get some fingerprint marks/smudges on the engine cover during the installation, that's why we send our Forge engine cover in a microfibre bag. You can use the bag along with the Meguiar's Care Pouch to give your new car engine cover a fresh shine!  Manufactured by an autoclave process. This involves the use of up to 10BAR of pressure that is blown into a 100% billet mould to force the material out. This high amount of pressure ensures the carbon fibre is fully in contact with the surface of the mould, therefore, making sure the weave is tight, solid, and strong; this process will also ensure there are no imperfections in the product. In the Box:1 x Forge Carbon Engine Cover1 x Forge Micro Fibre Bag1 x Meguiar’s Care Pouch1 x Forge Decal   The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately, due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. All other aspects of your carbon fibre products are covered by our warranty process.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of manually removing these deposits can be difficult, time consuming, and expensive. The 034Motorsport Direct Injection Head Port Cleaning Tool makes short and easy work of removing these deposits from your intake ports and valves. The tool has a small port for a media blasting wand and a large port that connects to a shop vacuum hose. The vacuum generated by the shop vac holds the tool in place up against the intake port, freeing your hands to focus on the media blasting. To use, simply rotate the crankshaft to close the intake valves in a given intake port before positioning the Direct Injection Head Port Cleaning Tool on the intake port. Turn on the vacuum and media blast away. All of the blasting media is sucked into the shop vac, making the entire process quick and easy, with little to no clean-up necessary afterwards. Features:Machined from Billet 6061-T6 Aluminum For DurabilityClear Anodized for an Attractive, Corrosion Resistant FinishFits Standard 40mm (1 1/2") ShopVac HoseAccommodates Media Blast Wands Up to 10mm (3/8") in DiameterMakes Carbon Cleaning of Direct Injection VAG Engines Much Easier and Faster What's Included:Direct Injection Head Port Cleaning Tool (x1)Lots of Additional Free Time Fitment Guide:See Fitment Guide Tab for Extensive List of Applications Frequently Asked Questions:Does this fit the cylinder head without injector removal? - YESDoes this fit the B7 RS4 heads without injector removal? - YESNote: For 2.0 motors, it is easier to use this tool with the injectors removed, and the 2.0 injectors are easy to remove.   Suitable for: Shop By Car/Audi/RS7 (C7) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Car Care/Tools Shop By Car/Audi/A6 (C6) Shop By Car/SEAT/CUPRA/Exeo Shop By Car/Skoda/Roomster Shop By Car/SEAT/CUPRA/Ibiza Mk5 (6J) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/S4 (B7) Shop By Car/Audi/S4 (B6) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/R8 Mk1 (42 06-15) Shop By Car/Audi/A8 Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Skoda/Fabia Mk3 (NJ) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Golf Mk5/Maintenance / Tools Shop By Car/Audi/S3 (8V)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Ateca Shop By Car/Audi/Q2 Shop By Car/Audi/S6 (C7) Shop By Car/Volkswagen/Golf Mk7/Maintenance / Tools Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kamiq Shop By Car/Volkswagen/Golf Mk6/Maintenance / Tools Shop By Car/Skoda/Octavia Mk3 (5E)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk2 (5J)/Maintenance / Tools Shop By Car/Audi/S6 (C6) Shop By Car/Audi/A3 (8P 03-13)/Maintenance / Tools Shop By Car/Audi/A3 (8V 12-20)/Maintenance / Tools Shop By Car/Audi/S3 (8P)/Maintenance / Tools Shop By Car/Audi/TT Mk3 (8S)/Maintenance / Tools Shop By Car/Audi/S5 (B8)/Maintenance / Tools Shop By Car/Audi/TT RS (8J)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk1 (6Y)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Maintenance / Tools Shop By Car/Volkswagen/Beetle (16)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Formentor Shop By Car/Audi/RS6 (C7)/Maintenance / Tools     Code: 034-034-108-Z054

Read more less

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant union is subject to a lot of heat, becoming brittle and failing over time. Upgrading to the Billet Coolant Vent Union minimizes the risk of coolant leaks, enhancing the reliability of your EA888!The 034Motorsport Billet Coolant Vent Union is machined from billet 6061-T6 aluminum, which is ideal for components exposed to high temperatures and harsh operating conditions. The Billet Coolant Vent Union is then black anodized for long-lasting looks and corrosion resistance to ensure that this upgrade is able to withstand the high temperatures next to your turbocharger. FEATURES: CNC Machined From Billet 6061-T6 Aluminum Black Anodized for Long Lasting Good Looks and Corrosion Resistance New O-Ring Preinstalled Direct Replacement of OEM Component WHAT’S INCLUDED: 034Motorsport Billet Coolant Vent Union 1x O-Ring Preinstalled VEHICLE FITMENT FOR: Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Volkswagen/Passat B8 Shop By Car/Audi/Q5 (B9) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/Volkswagen/Beetle (16) Shop By Car/Audi/S3 (8Y)

Read more less

  The APR Open PEX intake system is the best price/performance intake system on the market and has already been installed thousands of times in vehicles.The sound and performance of the engine were significantly increased and the restrictive area in the intake tract was eliminated. This made it possible to reduce the pressure loss and increase the efficiency of the turbocharger while doing the same work. This results in more power and torque while reducing load. The system uses a washable 7-inch and very high quality conical cotton filter that has a 4-inch connection.This was also necessary to reduce the standard pressure drop and maximize the airflow while also significantly increasing the sound aspect. The PEX material conducts heat very poorly, which also benefits the system and therefore ideally contributes to increasing performance.The PEX material still gives the engine compartment a touch of stock component, as far as you can say for an open air filter. The material also offers the advantage that almost any design can be realized. This made it possible to create an extremely complex and organic shape of the heat shield, which can effectively shield the hot air from below. Features: Improved intake noise Reduction of pressure loss Increases the efficiency of the turbocharger ore power and torque High quality cotton filter Airflow is maximized Made from PEX material FITS: Shop By Car/Volkswagen/Passat B8 Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Skoda/Superb (3V 2015-) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4  

Read more less

As part of our expanding VAG product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the MQB Evo engine (300-320ps), suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow features a constant 80mm diameter throughout, which limits flow and capacity. Our AIRTEC Motorsport direct replacement kit features a cast aluminium elbow and Pro Hoses silicone hose with a larger 90mm diameter throughout, until it tapers down to meet the 80mm air box, which offers a 27% increase in cross sectional area. The increased volume and improved design works to reduce restriction and improve flow to the turbo, providing an increase in throttle response. The elbow upgrade includes all fixtures and fittings, as well as detailed instructions. Dimensions:OEM Turbo Elbow:Diameter: 80mmCross sectional area: 5,027mm² AIRTEC Motorsport Turbo Elbow:Diameter: 90mmCross sectional area: 6,362mm² Fitment:Audi S3 8Y – 2020 onwardsCupra Leon Mk4 300 TSI FW – 2020 onwardsCupra Formentor 310PS – 2020 onwardsVW Arteon R 2.0 TSI 320ps – 2020 onwardsVW Golf Mk 8 GTI Clubsport – 2020 onwardsVW Golf Mk8 R – 2020 onwardsVW Tiguan II R 2.0 TSI 320ps – 2020 onwards Features: 27% increase in cross sectional area Smoother, freer-flowing design Improves airflow to the turbo Increases throttle response Direct replacement fitment Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSVAG10

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

RacingLine Performance Oil Cap - 1.0TSI 1.2TSI 1.4TSI and GTERacingLine Performance's billet aluminium Oil cap to suit the EA211 Small engine TSI models comes complete ready to fit; including a new seal!  WHY CHANGE YOUR OIL CAP?The precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI enginesThe precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI enginesThe precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI engines. CONFIRMED APPLICATIONS VWR190004 All EA211 engines: 1.0 TSI 1.2 TSI 1.4 TSI 1.4 GTE/hybrid ​ Multiple vehicle types with this engine, including: > VW Golf 8 2020+ > VW Golf 8 GTE 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat B8 2015+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco TSI / TDI 2008-2017 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 6C/6R 2008-2018 > VW Polo 6 AW 2017+ > VW Caddy 1.0 TSI 2015+ > VW T-Cross 2017+ > Audi A1 2010-2018 > Audi A1 GB 2019+ > Audi A3 8Y 2020+ > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi Q2 2017+ > Audi A3 8P 2003-2012 > SEAT Ibiza 6J 2008-2017 > SEAT Ibiza 6F 2017+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > SEAT Ateca 2016+ > SEAT Arona 2017+ > SEAT Toledo 2012+ > SEAT Tarraco 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013 > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Rapid 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Kodiaq 2018+ > Porsche 911 991 2012+ > Porsche Boxster & Cayman 981/982 2012+

Read more less

REMOTE WASHER REFILL KIT Essential for fitting the RacingLine Oil Management kit on Golf 7R and Audi S3 WHY FIT? To fit our Oil Management Kit on Golf 7R and Audi S3 models, you will also need this Remote Washer Refill Kit. Golf 7R and some early Audi S3 models have a different windscreen washer bottle fitment to the other MQB cars, with the reservoir located on the right of the vehicle compared to the majority of MQB models which have the washer bottle on the left.   For these cars with right-hand reservoirs, this is located where the Catch Can will be mounted. The kit replaces the top half of the factory washer bottle to still allow you to refill your washer fluid easily and neatly. Included is a beautifully high-gloss filler cap which locates conveniently on the front panel using the bracket provided Many owners prefer the appearance of our Remote Washer Refill  and of course this can be fitted without having the RacingLine Oil Management kit installed. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined  with the latest CNC 5-axis technology. Complete fitting kit, including brackets Polished, then gloss-anodised to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

RACINGLINE R600 EVO COOLANT UNDERHOSE Our R600 EVO Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look R600 EVO COOLANTUNDERHOSE PIPEFor VWG 2.0TSI EA888.4 (excluding Golf mk8 R)   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced 4-ply reinforced silicone to withstand the high pressures of the coolant system Inner Flouro lining to be compatible with G12 and G13 coolant fluid used on MQB cars Precision moulded to retain the perfect shape for the life of the car Temperature-resistant premium grade silicone rubber will exceed any possible coolant temperatures and keep its rigidity CONFIRMED APPLICATIONS VWR17 G8R600  FOR CARS WITH R600 INTAKE FITTED > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+

Read more less

Here we have a brand new product for the MK3.5 Focus including the ST/RS models. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Much thicker than other panels on the market and currently available in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. Carbon fibre, gloss black and textured panels are supplied ready to fit to the car. Fitment is straight forward and takes 15 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! The variances in the air conditioning piping has meant that we are offering this product with the option of a hole for the air conditioning pipe. Some of these pipes stick up further than others. If you opt not have the hole, this can result in a small gap (3-4mm) between the front of the headlight and the panel. We appreciate that some people will be happy with a small gap rather than a pipe sticking through slam panel (it looks cleaner without the hole). However, if you would prefer to have the hole we can drill this for you to order,  We can offer these painted or hydrodipped, please contact us for more details - support@ceuk.org

Read more less

  Here we have a brand new product for the pre-face lift MK3 Focus including the ST model. These slam panel ends tidy up the appearance of the area around the rear of the headlight. The kit is universal for cars with or without bonnet gas struts.  Currently available to order in our smooth plastic, gloss black plastic, textured plastic for the OEM look and carbon fibre effect plastic. These panels have been designed for paint (smooth raw plastic) and are the only product on the market for this vehicle. Other finishes are ready to fit. These parts have been designed on a standard vehicle which has not suffered from any previous accident damage. Some adjustment may be needed to accommodate other after market parts inc aftermarket headlights. Fitment is straight forward and takes 25 minutes; no cutting or drilling is required to fit the items. Comes complete with fitting kit and instructions. Fitting video will also be available soon! Please note you will need to remove your bonnet sound pad to ensure it does not rub on the slam end panels. This is particularly relevant if you have selected the gloss black or carbon finished items. 

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A5/B5API SL, CF SUITABLE FOR: ACEA A1/B1 Chrysler MS-6395 Dacia Ford WSS-M2C913-D, Ford WSS-M2C913-C, Ford WSS-M2C913-B ILSAC GF-4 Jaguar Land Rover STJLR.03.5003 Renault RN0700 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-40 C3 is recommended for engines requiring a C3 5w40 viscosity targeting 'Pumpe Düse' PD Volkswagen Audi Group, GM and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Fiat 9.55535-T2, Fiat 9.55535-S2 Ford WSS-M2C917-A GM dexos 2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.51, MB 229.31 Porsche A40 PSA B71-2290 <2014 Renault RN0700 / RN0710 VW 502 00 / 505 01, VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional 5W-30 C3 is recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Chrysler MS-11106 Fiat 9.55535-S3 GM-LL-B-025, GM-LL-A-025 MB 229.51, MB 229.31 Porsche C30 VW 504 00 / 507 00, VW 506 00 / 506 01 VW 503 00 / 503 01, VW 502 00 / 505 01 VW 502 00 / 505 00 Asian manufacturers Millers Oils underwrites this product for GM dexos 2 applications

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines. APPLICATION: Millers Oils Trident Professional 5w-40 is recommended for engines requiring a 5w40 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A3/B4 ACEA A3/B3 API SN, SM, SL, CF SUITABLE FOR: BMW Longlife-01 BMW Longlife-98 Chrysler MS-12991 Fiat 9.55535-Z2, Fiat 9.55535-N2 Fiat 9.55535-M2, Fiat 9.55535-H2 GM-LL-B-025, GM-LL-A-025 MB 226.5, MB 229.5, MB 229.3, MB 229.1 Porsche A40 PSA B71-2296 <2014, PSA B71-2295, PSA B71-2294 Renault RN0700 / RN0710 VW 502 00 / 505 00 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, semi synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines. APPLICATION: Millers Oils Trident Professional 5w-30 is recommended for engines requiring a 5w30 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves reduces emissions and provides extended drain capability Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA A3/B4 ACEA A3/B3 API SL, CF SUITABLE FOR: BMW Longlife-01 BMW Longlife-98 Fiat 9.55535-G1 Ford WSS-M2C913-B Ford WSS-M2C913-A ILSAC GF-2 MB 229.5 MB 229.3 MB 229.1 PSA B71-2296 <2014, PSA B71-2295 PSA B71-2294 Renault RN0700 / RN0710 VW 502 00 / 505 00 VW 500 00 / 501 01 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional C5 5W-20 is recommended for engines requiring a C5 5w20 viscosity targeting Ford Eco-Boost engines and Jaguar Land Rover. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C5 API SN SUITABLE FOR: ACEA A1/B1 Chrysler MS-6395 Fiat 9.55535-CR1 Ford WSS-M2C948-B, Ford WSS-M2C948-A Ford WSS-M2C925-B, Ford WSS-M2C925-A ILSAC GF-5 Jaguar Land Rover STJLR.03.5004 Asian manufacturers

Read more less

This listing is for 1x 5L Barrel   A professional, fully synthetic, mid SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. APPLICATION: Millers Oils Trident Professional C2/C3 5W-30 is recommended for engines requiring a C2 or C3 5w30 viscosity meeting the manufacturer specifications. FEATURES & BENEFITS: Excellent low temperature flow when cold starting, helping to instantly protect vital components Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability Utilising mid SAPS technology protecting particulate filters and controlling soot build up Millers Oils stop start technology delivers instant protection under hot or cold conditions PERFORMANCE PROFILE: ACEA C2/C3 API SN, CF SUITABLE FOR: BMW Longlife-04 Fiat 9.55535-S3, Fiat 9.55535-S1 GM dexos 2 GM-LL-B-025, GM-LL-A-025 MB 229.52, MB 229.51, MB 229.31 PSA B71-2290 <2014 Renault RN0700 VW 502 00 / 505 01, VW 502 00 / 505 00 Asian manufacturers

Read more less