PERFORMANCE - VOLKSWAGEN TIGUAN MK2 (5N) 2016-2024

Product Description Average gains of 5.5bhp Gains of 16bhp at peak and average of 10bhp from 4500rpm when coupled with FMTIA5/9 Average gain of 20NM of torque Prepreg 2x2 twill formed carbon fibre Dyno proven Great induction noise More responsive throttle Lifetime Warranty Compatible Vehicles: Audi A3 1.8/2.0 TSI 2015 Onwards S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) TT Mk2 2.0 TTS Mk3 8S (2014-2021) Mk3 8S 316bhp (late 2022-) Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Leon VZ1, VZ2, VZ3 Seat Leon Mk3 2012-2020   Skoda Octavia VRS 2.0 TSI 2013 Onwards Octavia 4 RS Superb 280 4x4 DSG Volkswagen Arteon 2.0 TSI Golf MK7 1.8 TFSI GTI GTI Clubsport ED40 R MK7.5 GTI  R MK8 Clubsport 45 GTI GTI S R Passat 2.0 TSI (2015-2021) T-Roc 2.0 2018-2021 Tiguan 2.0 TSI 2017 Onwards R 2022 Onwards (Gen 4) With the release of the VW Golf MK8 R, the development team at Forge Motorsport knew that there would be a great opportunity to help the EA888 engine breathe easier and make more power. We were lucky to get one of the first MK8R’s to enter the UK and used this opportunity to put months of development and testing into this new induction kit. Our MK8 Golf R has been put through countless hours of track day work and hill climbs, alongside the usual daily and spirited driving. This kit has been designed from the ground up, using 3D Scanning, FEA Simulation data in SolidWorks CAD, 3D printed development, and numerous dyno sessions to truly unlock the power. Simulation testing played a large part in the design process to help maximise the airflow. This included a tear drop cavity around the bonnet release mechanism to ensure that the airflow stays fast and laminar on its way to the filter element. The 3D printed prototypes helped with comparing our simulation testing to real world driving conditions. This is a valuable comparison that is used in the top tiers of motorsport, now being brought to your vehicle. During the final prototypes testing we found that the Forge induction kit with stock turbo inlet produced gains on average of 5.5BHP. However, when paired with our Turbo Inlet Adaptor FMTIA5/9 this is where the stock EA888 engine saw impressive gains, increasing power up to 16BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 10BHP, while the drivability and the punch from extra torque increases can be felt on the road as between 4000RPM to the rev limit an average gain of 20NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power. This induction kit runs the full width of the slam panel, incorporating an elegant lip which neatly slides under the slam panel to ensure that all the cold air from the front of the vehicle flows through into the inlet tract with no detriment from the engines heat. During testing we found this to make a significant increase to airflow and a reduction to inlet air temperatures (IAT’s). Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of the engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level; which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder (providing the correct amount of fuel is added) - this equates to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance of their car when tuning to stage 1, stage 2, and beyond. Not only do you get the bhp performance benefits, but INDK40 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development have gone into this extraordinary performance induction kit. FMINDK40 is part of our acclaimed Hi Flow range and will ensure that your vehicle is getting critical cold air. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the engine bay some character. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. You can find a replacement filter here. *Please note - the filter is excluded from the Forge lifetime warranty*

Read more less

Product Description Highlights: UV, temperature, and water-resistant Designed to locate in the OEM factory position Finished in high quality clear coat to ensure UV-protection and extra durability Take an already incredible vehicle, pop the bonnet and view the engine with no cover in place, yeah, its bit of an anti-climax. This is how many owners feel when showing off there EA888 Gen 4 engine as unfortunately the VAG group have recalled the engine covers due to a potential fire risk leaving the engine looking unfinished and disappointing, For those reasons, we took the OEM engine cover and improved it. Our cover fits on the original mounting locations, is water-resistant, and takes each heat cycle of the engine with ease. Not only that, it's finished in high quality clear coat to ensure UV-protection and extra durability.   Compatable Vehicles: Audi S3 2.0TSI (8Y Chassis) TT 45 TFSI (8S) TTS Mk3 8S 316bhp (late 2022-) Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Skoda Kodiaq RS 2021- Octavia 4 RS Volkswagen Arteon 2.0 TSI Golf MK8 Clubsport 45 GTI R T-Roc R (2022 Onwards) Tiguan R 2022 Onwards (Gen 4)   It fits perfectly with the Forge carbon intake and Forge turbo inlet pipe solution, which as a trio will completely transform your car engine bay! It is almost guaranteed that you will get some fingerprint marks/smudges on the engine cover during the installation, that's why we send our Forge engine cover in a microfibre bag. You can use the bag along with the Meguiar's Care Pouch to give your new car engine cover a fresh shine!  Manufactured by an autoclave process. This involves the use of up to 10BAR of pressure that is blown into a 100% billet mould to force the material out. This high amount of pressure ensures the carbon fibre is fully in contact with the surface of the mould, therefore, making sure the weave is tight, solid, and strong; this process will also ensure there are no imperfections in the product. In the Box:1 x Forge Carbon Engine Cover1 x Forge Micro Fibre Bag1 x Meguiar’s Care Pouch1 x Forge Decal   The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately, due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. All other aspects of your carbon fibre products are covered by our warranty process.

Read more less

 compatible for: Audi A3 1.8/2.0 TSI 2015 Onwards Q3 2.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ2 2.0TSI (2018-2021) TT Mk2 2.0  A31.8/2.0 TSI 2015 Onwards Q32.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ22.0TSI (2018-2021) TTMk2 Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Leon VZ1, VZ2, VZ3 Seat Leon Mk3 2012-2020 Skoda Kodiaq 2.0TSI (EA888 Gen 3) RS 2021- Octavia VRS 2.0 TSI 2013 Onwards Octavia 4 RS Superb 280 4x4 DSG Volkswagen Arteon 2.0 TSI Golf MK7 1.8 TFSI GTI GTI Clubsport ED40 R MK7.5 GTI  R MK8 Clubsport 45 GTI GTI S R Jetta MK7 (2018-2021) 2.0 GLI MK7.5 (2021-) 2.0 GLI Passat 2.0 TSI (2015-2021) T-Roc 2.0 2018-2021 Tiguan 2.0 TSI 2017 Onwards R 2022 Onwards (Gen 4) Touareg 2.0 TSI (2018-2021) Product Description Highlights: Power gains of up to 13BHP (when paired with the appropriate turbo inlet adaptor) Torque gains of up to 17NM (when paired with the appropriate turbo inlet adaptor) Pleated or foam filter available Greater engine sound Made in the UK Lifetime guarantee With our in-house VW Golf MK8R development vehicle we have been able to complete thorough testing on the EA888 gen4 platform, from rolling roads to track time. This has allowed us to create FMINDK44, the second induction kit we have available for the EA888 gen 3 and gen 4 platform (alongside our carbon fibre variant, FMINDK40). This kit features either a Forge Motorsport Ram Air high flow, pleated, synthetic nanofiber filtration filter or a Pipercross foam filter. Both are manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 2.0 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameter has been carefully tuned to provide exactly the correct quantity of air for consistent power gains throughout the rev range and minimising the chance of low-end torque loss; the pipework is specifically designed to feed the turbo without interruption. The result of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the EA888 engine. With the use of SolidWorks, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. The majority of our dyno testing was done on our VW Golf R MK8 EA888 Gen 4, as such you may find slight variations in gains when fitted to other vehicles sharing this engine. During the final prototypes testing we found that the induction kit with stock turbo inlet produced gains on average of 3.5BHP. However, when paired with our turbo inlet adaptor FMTIA5 (RHD), FMTIA6, or FMTIA9 (LHD), or FMINLMK7, this is where the stock EA888 gen4 engine saw impressive gains, increasing power up to 13BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 8BHP; while the drivability and the punch from extra torque increases can be felt on the road at between 4000RPM to the rev limit an average gain of 17NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power.     Why Do We Try To Decrease Inlet Air Temperatures (IAT’S)? By utilising the OEM cold air feed, and keeping the heat shield open on the headlight corner side we were able to see a decrease in IAT’s compared to the OEM during testing. By ensuring that the intake heat shield is open on this side it also means that vehicles being tuned to stage 2/3+ have a reduced risk of being restricted with them pulling in a greater quantity of air. Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance when tuning to stage1, stage 2 and beyond. Not only do you get the bhp performance benefits, but FMINDK44 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development has gone into this extraordinary performance induction kit. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. The kit has been designed not just to increase power but to fit a whole range of vehicles on the MQB platform. This goes as far as to include cars using the OEM turbo elbow and the Forge Motorsport FMTIA5/FMTIA6/FMTIA9 high flow elbows. With FMTIA5/FMTIA6/FMTIA9 using multi ply silicone, it has minimal flex; however the OEM inlet hose uses an accordion rib design which could cause the filter to damage itself or the heat shield. Unlike our competitors, we have included a P-clip and tab on the back of the heat shield, allowing the OEM inlet hose to be secured to the heat shield, meaning no damage and no annoying rattles! Time taken to install - around 1 hour

Read more less

Product Description Highlights: 16bhp Gains 20nm increase in torque\ 24°C temperature drop  Made in the UK Reduced turbo lag No cutting of vehicle to fit Lifetime warranty This part will replace the following OEM parts: 5Q0145803H, 5Q0145803K, 5Q0145803L, 5Q0145803P, 5Q0145803S, 5Q0145803N Following on from our previous intercooler solution for the MK7 golf and MQB chassis variants that utilise the EA888 2.0 GEN3 2.0 TSI engine, we have designed our race intercooler to further enhance performance over the original intercooler and our previous iteration of our cooling solution, designed, developed and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN3 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler along with increasing the size again over our hugely successful product FMMK7FMIC. We also had to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity. Our research and development engineers went back to the drawing board looking at previous documented dimensions while also taking new scans of the intercooler housing, this enabled the team to squeeze a further 10mm in depth of the core that houses very snugly into the earlier MQBs platform. We also looked at the differences between the Mk7 and Mk8 cooling components and found that the Mk7 Golf GTI and Golf R has a thicker radiator than the MK8 equivalent models thus meaning we also needed to consider any fitment procedures carefully. The design team started to 3d print the intercooler end tanks while creating a test sample dummy core to fit to the Mk7s platform and check for any clearance issues that may occur. The final chosen design has increased inlet and outlet sizes along with increasing the volumetric capacity to increase flow which aids with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 3 engines as well as offering the best cooling solutions for either a stock or mildly modified powerplant. This gives the best package for the enthusiast as they start their journey in enhancing the vehicles performance. The 3d printed end tanks and dummy core enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing. Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area. The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%. Why do we test different cores? Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights i.e. 22 fins per inch or 17 fins per inch as well as changing the internal fin pitches/shapes and density within the tube enabling to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects, this is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere. Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures. Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer; this was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. Peak power was increased from stock by 16bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP increase from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT32 is installed.     During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C), we then did a dyno pull from this point, in doing this it gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM. After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C @ 6000 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C just before the rev limiter These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use a Golf R for fast road or have a high-performance tune in a hot climate, this product is essential.      Why do we try to reduce IAT's (Inlet Air Temperatures)? Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for a simple install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.    

Read more less

*Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles* Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*

Read more less

Product Description FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity. Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing. Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area. The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%. Why do we test different cores? Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.  Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures. Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.     After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C at 6548 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C at 6508 RPM. These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use your car for fast road or have a high-performance tune in a hot climate, this product is essential.  Why do we try to decrease IAT's? (Inlet Air Temperature) Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. ​​​​ The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.

Read more less

Product Description This only fits vehicles from 2022 onwards This adaptor installs in between the intake manifold elbow and the vacuum pipe coming from it. Behind the two pipes circled below. Please check this before ordering as you may require FMBGFK21 A simple solution requiring no tools for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible. For this type of engine with the vacuum source here, this kit is required If your engine has the vacuum source in this location you will require FMBGFK21   In the Box:AdapterRetaining ClipSplit SleeveCable ties (x10)2 metres of 4mm Vacuum Hose Check your vehicle compatibility: Click here

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

This is a replacement for OEM Part Number 06N.145.710.B Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2021-on VAG 2.0 TSI engine (engine codes DNP & DNFB). This valve is a full replacement recirculation valve (i.e. quiet) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition! Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer life but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp! This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the air filter, older larger valves and sandwich plates will not fit this engine. In The Box:1 x FMDV32 Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Blue Spring (Uprated)1 x 5mm Brass T Piece12 x Cable Ties1 x 1500mm Length of 4mm Vac Hose1 x Forge Keyring and Sticker  

Read more less

This is a replacement for OEM Part Number 06N.145.710.B Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2021-on VAG 2.0 TSI engine (engine codes DNP & DNFB). This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition! Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer life but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp! This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the air filter, older larger valves and sandwich plates will not fit this engine. In The Box:1 x FMDV32 Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Blue Spring (Uprated)1 x 5mm Brass T Piece12 x Cable Ties1 x 1500mm Length of 4mm Vac Hose1 x Forge Keyring and Sticker  

Read more less

This product only works in conjunction with FMINDK35. After the success of the FMDV22 Forge Motorsport has now developed a recirculating Valve option for the VAG 1.5 TSI engine. It uses our tried and tested FMDV008 recirculation valve, this valve has been with us for some time and has proved time and again to be tough, durable and ultra-reliable. By adding this valve, it prevents turbo surge and prolongs the life of your engine’s turbocharger. As the engine does not have a diverter valve fitted as standard, Forge have reused our tried and tested FMDV008 valve that increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on engines and modified vehicles. Like with all our valves you are able to customise it to fit your application with two uprated springs provided in the kit. Due to its clever design, changing the spring is a very simple process, simply undo the fasteners attaching the valve top and remove the spring. Its that easy! Due to the exposed position of the OEM boost pipe and the nature of an engines heat cycle, the plastic the OEM pipe is made from can deteriorate over time becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicone hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions. •    Anodised CNC machined billet couplers and components along with a tuneable CNC machined twin piston Forge Motorsport valve•    Custom colours are available but will incur a 50% none refundable deposit and a lead time of 8-10 weeks•    Unlike other valves on the market the Forge valve will not bring on any check engine lights (EML) •    The Forge silicone hose in this kit has been designed to include a quality inner liner of modified silicone known as Fluorosilicone. This ensures the colour of the silicon hose stays bright and vibrant and unlike our competitors will not deteriorate over time•    This means Forge Motorsport hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist•    The construction of the hose has been engineered to exceed that of the OEM fitments•    The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader•    Lifetime warranty In the Box:1x Recirculating Dump Valve1x Boost Tap/take Off (Including Cork Gasket and Screws)1x Throttle Body and Turbo Couplers2x Silicone Hose (Red, Blue or Black)6x Hose Clamps1x Roll of Vacuum Tubing1x Norma Adaptor Fitting1x Blanking Plug   

Read more less

Forge Motorsport Boost Tap Kit for 1.5 TSI Engines and late 1.4 TSI engine from 2018 onwards. This adaptor installs inbetween the intake manifold vacuum pipe and the vacuum hose coming from it A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment.  Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible. In the Box: AdapterSmall Forge StickerCable ties (x10)3 metres of 4mm Vacuum HoseInstructions Download

Read more less

Product Description A replacement high flow performance air filter for our popular FMINDK14 and FMINDK14-GTE induction kits. The filter will also replace the paper element for those wishing to remove the restrictions of the OEM unit. Please watch our video on how to fit an air filter without damaging it. FITS: AudiA31.4 TSI/TFSI 2015 Onwards (8V)Q21.4 150BHPSeatLeonMk3 2012-2020SkodaKodiaq1.4 150BHPOctavia1.4 150BHPSuperb1.4 150BHPVolkswagenGolfMK7MK7.5JettaMK7 (2018-2021)Tiguan 1.4 150BHPTouranII 1.4 150BHP

Read more less

Product Description *Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles* Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. FITS: AudiA1A1 (GB) 2018-35 TFSI (1.5 TSI)A335 TFSI (1.5 TSI)Q235 TFSI (1.5 TSI)Q335 TFSI (1.5 TSI)CupraFormentor1.5 TSISeatArona1.5 TSIAteca1.5 TSIIbizaMk5 (KJ) 2017 - late 20211.5 TSILeonMk3 2012-20201.5 TSI 130/150 BHP 2018-Mk4 2022-1.5 TSITarraco1.5 TSISkodaKaroq1.5 TSIKodiaq1.5 TSIOctavia1.5 TSIScala1.5 TSISuperb1.5 TSIVolkswagenArteon(2017-2020)1.5 TSI(2020-)1.5 TSIGolfMK71.5 TSIMK7.51.5 TSIMK81.5 eTSI1.5 TSIPassat1.5 TSIT-CrossT-Cross 1.5 TSIT-Roc1.5TSITiguan1.5 TSITouran1.5 TSI Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*    fits: AudiA1A1 (GB) 2018-35 TFSI (1.5 TSI)A335 TFSI (1.5 TSI)Q235 TFSI (1.5 TSI)Q335 TFSI (1.5 TSI)CupraFormentor1.5 TSISeatArona1.5 TSIAteca1.5 TSIIbizaMk5 (KJ) 2017 - late 20211.5 TSILeonMk3 2012-20201.5 TSI 130/150 BHP 2018-Mk4 2022-1.5 TSITarraco1.5 TSISkodaKaroq1.5 TSIKodiaq1.5 TSIOctavia1.5 TSIScala1.5 TSISuperb1.5 TSIVolkswagenArteon(2017-2020)1.5 TSI(2020-)1.5 TSIGolfMK71.5 TSIMK7.51.5 ETSI1.5 TSIMK81.5 eTSI1.5 TSIPassat1.5 TSIT-Roc1.5TSITiguan1.5 TSITouran1.5 TSI

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

Product Description 70mm I/D Rubber Neck Open Cone Air Filter - High flow construction and increased surface area Replaces the filter in the following kits - FMINDK5- Ford Fiesta 1.0 Ecoboost induction kit FMINDST180- Ford Fiesta ST180 induction kit FMINDASTG - Astra G induction kit *Please note - this filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.

Read more less

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is by far the most complete oil collection system currently on the market. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine. Extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the Tiguan 2.0 TSI engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend any owner seriously consider, particularly if they are planning more advanced power tuning at a later date. The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well placed drain tap. The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F) Finally, the kit features a pair of stainless steel reinforced oil resistant hoses with black external braiding, which combine with the supplied fittings to form an OEM-looking product when installed, so much so that the engine cover can still be clipped into place!   Highlights 0.4L capacity*A drain tap for ease of emptyingA dipstick for simple level inspection2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous lookFully assembled with fittings to suit the OEM connectionsInner tube is constructed from anti-static smooth fuel resistant nitrile rubberOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapseTemperature Range: -54°C to +150°C (-65°F to 300°F)The engine cover can still be fitted after installationInstallation is straight forward with all necessary fittings and instructions included *Dipstick level is set at less than 0.4L for optimum breathing.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge has developed this turbo outlet muffler delete pipe for the 177hp 2.0 petrol turbo (TSI) It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part. This product fits:AudiA32.0 FSiTQ32.0 TSI (2011-2014)2.0 TSI (2015-2018)TTMk22.0SeatLeonMk2 2005-2012Cupra 2.0 TFSiSkodaKodiaq2.0L 2016-Octavia2.0 FSiT2.0L  VolkswagenBeetle2013 2.0EOSGolfMK6GTIPassat2.0 FSiTPoloGTI 2.0 2018-2020 AW ChassisScirocco 2.0 up to 2016Tiguan2.0 TSI 2017 Onwards 2.0 FSiT     To confirm compatibility, we have found that this will fit the vehicles that have a MAF sensor in the intake pipe as illustrated below. We recommend that you give yourself 2-3 hours to install this Forge Product   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This kit comprises of four silicone hoses . These hoses will withstand greater temperatures and pressures compared with the OEM hoses and they look fantastic.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* FITS: AudiA32.0 FSiTS32.0 TSI (8V Chassis)SQ22.0TSI (2018-2021)TTMk32.0 TSI 2015 OnwardsTTSMk3 8S (2014-2021)CupraAteca(up to 2020)SeatLeonMk3 2012-2020Cupra 280/290/300RSkodaOctaviaVRS 2.0 TSI 2013 OnwardsSuperb2.0TSI 220 BHP280 4x4 DSGVolkswagenArteon(2017-2020)2.0 TSIGolfMK71.8 TFSIGTIGTI Clubsport ED40RMK7.5GTI RJettaMK7 (2018-2021)2.0 GLIMK7.5 (2021-)2.0 GLIPassat2.0 FSiTT-Roc2.0 2018-2021Tiguan2.0 TSI 2017 Onwards   *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Forge Motorsport FMDV22 Blow off valve kit now fits all engine variants, please identify from the images below whether you require the extra breather adapter for you application. If your engine bay is the same as shown above then you will require the aditional breather adapter so please make sure to select 'Yes' on the Breather adapter dropdown option. FITS: AudiA1A1 (GB) 2018-35 TFSI (1.5 TSI)A335 TFSI (1.5 TSI)Q235 TFSI (1.5 TSI)Q335 TFSI (1.5 TSI)CupraFormentor1.5 TSISeatArona1.5 TSIAteca1.5 TSIIbizaMk5 (KJ) 2017 - late 20211.5 TSILeonMk3 2012-20201.5 TSI 130/150 BHP 2018-Mk4 2022-1.5 TSITarraco1.5 TSISkodaKaroq1.5 TSIKodiaq1.5 TSIOctavia1.5 TSIScala1.5 TSISuperb1.5 TSIVolkswagenArteon(2017-2020)1.5 TSI(2020-)1.5 TSIGolfMK71.5 TSIMK7.51.5 TSIMK81.5 eTSI1.5 TSIPassat1.5 TSIT-CrossT-Cross 1.5 TSIT-Roc1.5TSITiguan1.5 TSITouran1.5 TSI If your engine bay is the same as shown above you do not require the additional breather adapter, please make sure to select 'No' on the dropdown option. As the engine does not have a diverter valve fitted as standard, Forge have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle, but also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure. Especially on engines and modified vehicles. This valve kit allows the fitment of our fast response blow off valve preventing turbo surge and prolonging the life of your engine’s turbocharger.   The kit includes all of the necessary hardware and step by step installation instructions for any car enthusiast with appropriate garage tools to fit at home, in just a couple of hours!     Due to the exposed position of the OEM boost pipe and the nature of heat cycle, the plastic that the OEM pipe is made from can deteriorate over time, becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicone hose (available in a choice of colours!).     Highlights: CNC machined billet couplers and components CNC machined twin piston Forge valve Three hose options: red, blue, or black (Custom available but will incur a 50% non-refundable deposit and a lead time of 8-10 weeks) Forge valve will not bring on any check engine lights (EML)  The hose has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant, and will not deteriorate over time. Forge Motorsport lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically. The hose from this kit replaces OEM part numbers 05E.145.673.E and 05E.145.674.E We cannot guarantee that this product will fit with all aftermarket intakes. Lifetime warranty. In the Box:1 x Atmospheric Dump Valve1 x Boost Tap/Take Off (Including Cork Gasket and Screws) Throttle Body and Turbo Couplers1 x Silicone Hose (Red, Blue or Black)3 x Hose ClampsAll fixings and fittings1 x Roll of Vacuum Tubing1 x Wiring Loom Extension1 x Forge Sticker     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

*Before purchase and to ensure compatibility please check that your intake configuration is the same as the photograph at the end of the text. Please note this product does not fit the Golf GTE Model, Please see FMINDK14-GTE.  This product is ideally fitted in conjunction with the product FMDV1 (1.2/1.4 TSI Dump valve and fitting kit). If purchased as a stand-alone product the turbo inlet hose will push up against the adjacent OE charge pipe, and a trim to the turbo inlet leg of the FMINDK14 induction hose may be required to avoid creasing. Highlights Part of the Forge Motorsport Hi-Flow range Increases air flow and improves efficiency and performance Up to 10 BHP gain Strong, tight carbon fibre weave Made from 100% carbon fibre with no fibre glass added Formed by Autoclave Pre Preg Easy installation Flurosilicone lined hose High flow cleanable airfilter with no need to ever replace Includes our Forge Motorsport Limited Lifetime Warranty This is the second product to be released in our new ‘Hi-Flow’ range. With this unique sleek design, you can expect to see a carbon fibre housing that flows beautifully along the engine bay, giving you more horse power and torque, and hopefully an appreciation for the care and time that has gone into the production. It includes a billet machined coupler made to exact tolerances at our machine shop in Gloucester, UK, ensuring a perfect fit. The hose is available in red, blue or black and is supplied with all necessary hose clamps.     The Design Following the success of our carbon fibre intake for the Mk7 Golf we knew that we wanted to continue with our ‘Hi-Flow’ range and bring out an affordable option to the 1.4 TSI market. We conducted intense market research, speaking to tuners and owners of the vehicles we wanted the intake to fit. We concluded that rather than creating an entire carbon fibre intake system, the best product to create would be a carbon fibre scoop and airbox lid that fits with original airbox. With this idea in mind we started the design. Using industrial foam and aluminium the concept design was created.  With these components, we could identify the best way to fit the scoop, join it to the air box and mount it to the vehicle. FITS: AudiA31.4 TSI/TFSI 2015 Onwards (8V)Q21.4 150BHPSeatLeonMk3 2012-20201.2 TSI 2014-20201.4 TSI 125/140/150 BHP 2014-2019SkodaKodiaq1.4 150BHPOctavia1.4 150BHPSuperb1.4 150BHPVolkswagenGolfMK71.2 TSI1.4 TSI 125BHP/138BHP/150BHPMK7.51.4 TSI 138BHP/150BHPJettaMK7 (2018-2021)1.4 TSITiguan 1.4 150BHPTouranII 1.4 150BHP Once the first concept was completed our engineers used the latest technology to create a 3D rendering of how we wanted the intake to look.  Throughout the drawing process we ran simulated air flow tests, this way we could ensure that we would create a product with the most efficient flow possible. The carbon fibre prototype was made and fitted to the vehicle. The design is one of the most aesthetically pleasing and practical on the market To ensure we deliver the best quality product we could and following the extensive design and development of this intake, we enlisted the services of one the world’s leading Carbon fibre manufacturers, who’s products range from F1 aero, carbon fibre car bodies and aircraft wings! Tooling was then CNC machined from billet aluminium to ensure the finished product was flawless. This enables us to create a perfect airbox using the autoclave technique during the manufacturing process of the 2x2 twill carbon fibre. Rather than using a vacuum (also known as liquid infusion) to draw the resin through the mould then pulling the raw carbon fibre cloth to the mould shape, a technique known as Autoclave is used in the manufacturing of this beautifully designed product. This involves the use of up to 10 bar of pressure that is blown into a 100% billet mould to force it out. This high amount of pressure ensures the material is fully in contact with the surface of the mould.  Therefore, making sure the weave is tight, solid and strong, this process also ensures there are no imperfections in the product. The mould is then heated to cure the resin which in turn gives a tensile strength up to eight times stronger than mild steel but at a fraction of the weight. Having spent so much time on the carbon and silicone development we then turned to the equally important aspect of filtration.     Going with the Flow With the lid and scoop design completed we moved on to the hose and filter.  There is no point creating such an efficient system for it then to be restricted by the OEM hose and filter.  Therefore, for the filter we engaged our partners and experts in Filtration Control, Pipercross! With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided, flows 30% more air than stock and fits snuggly within the housing. This combination is second to none. The Forge Motorsport high flow intake hose that is mated to the carbon airbox eliminates the highly restrictive plastic and noise restricting inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification. The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.     In the Box: 1x Forge Motorsport Hi-Flow, carbon fibre airbox lid1x Forge Motorsport Hi-Flow, carbon fibre front scoop1x Pipercross air filter1x Meguiar’s care pouch and Forge Motorsport Micro Fibre Cloth1x larger bore high flow Silicone hose1x USB with installation instructions.   *Before purchase and to ensure compatibility please check that your intake configuration is the same as the photograph. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty*       Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Type A This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts engine movement under heavy acceleration and braking, resulting a firmer feel when shifting. To be sure that you have selected the correct bush insert for your vehicle please check the fitment guide below: CNC Machined from a single billet of aluminium alloy. All Forge machined parts go through a rigorous quality control procedure to ensure that they have been made to the highest standard (working to a tolerance of less than 0.1mm). With a hardwearing black anodised finish which protects the part from oxidation to ensure it looks its best for longer. Developed in house at our Gloucester R&D workshop with working prototypes 3D printed and test fitted. Part of a wider range of bush inserts Forge currently have in development, please see the Forge Motorsport website for details. *When fitting please Torque to 135 Nm If your vehicle has this bush (part number : 5Q0 198 037 B) fitted  you need a type “A” insert, part number FMAM-B2 If your vehicle has the alternative bush (part number: 5Q0 198 037 C) fitted you need type “B” insert, part number FMAM-B3   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. ----------------------------- Type B This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts engine movement under heavy acceleration and braking, resulting a firmer feel when shifting. To be sure that you have selected the correct bush insert for your vehicle please check the fitment guide below: CNC Machined from a single billet of aluminium alloy.  All Forge machined parts go through a rigorous quality control procedure to ensure that they have been made to the highest standard (working to a tolerance of greater than 0.1mm). With a hardwearing black anodised finish which protects the part from oxidation to ensure it looks its best for longer. Developed in house at our Gloucester R&D workshop with working prototypes 3D printed and test fitted. Part of a wider range of bush inserts Forge currently have in development, please see the Forge Motorsport website for details. *When fitting please Torque to 135 Nm If your vehicle has this bush (part number : 5Q0 198 037 B) fitted  you need a type “A” insert, part number FMAM-B2 If your vehicle has the alternative bush (part number: 5Q0 198 037 C) fitted you need type “B” insert, part number FMAM-B3 We advise customers to carry out a visual check before ordering the VW Golf Mk7 bush insert as the dogbone bushes are interchangeable and can be retro fitted. FITS: A31.4 TSI/TFSI 2015 Onwards (8V)1.8/2.0 TSI 2015 OnwardsQ21.4 150BHPRS38V 2015-20178V Facelift 2017-20208Y 2021 OnS32.0 FSiT (8P Chassis)2.0 TSI (8V Chassis)TTMk32.0 TSI 2015 OnwardsTTRSMk3 8S (2017-)TTSMk3 8S (2014-2021)CupraFormentor2.0 TSI (245 BHP)SeatLeonMk2 2005-2012Cupra 2.0 TFSiMk3 2012-20201.2 TSI 2014-2020SkodaKodiaq1.4 150BHPSuperb1.4 150BHPVolkswagenArteon(2017-2020)1.4 eHybrid(2020-)1.4 eHybridGolfMK71.2 TSI1.4 TSI 125BHP/138BHP/150BHPGTEGTIGTI Clubsport ED40RMK7.51.4 TSI 138BHP/150BHPGTI RMK8GTIJettaMK7 (2018-2021)1.4 TSI2.0 GLIMK7.5 (2021-)2.0 GLITiguan 1.4 150BHPTouranII 1.4 150BHP

Read more less

This replacement adjustable sideshifter will allow you to shorten the side to side movement of your gear shift in order to obtain the optimum shifting times required for performance driving . You can personally customise the lateral movement to suit your own preference due to an infinitely adjustable pivot mechanism. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit all VAG 6 speed gear boxes as found in the vehicles listed in the 'compatible vehicles' tab above. (Please note: this does not fit the Skoda Fabia/VW Polo/Seat Ibiza/1.9 diesel applications) Up to and including 2007 models, the original side to side shifting mechanism on these vehicles should be made of metal with the 2008 and onwards models having the original side to side mechanism made of plastic. (on all models the throw or front to back mechanism is made of metal ) We supply within the kit the necessary parts to allow fitment to both types. Please note: To ensure that this product functions correctly and does not stress associated components, it is essential that the linkage cables are re-adjusted after the installation of this product, as per the fitting instructions.   In The Box:1 x FMVWSQS Shifter1 x 8.0mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut2 x Top Hat Bush1 x Push On Bush2 x Side Clips1 x Bag of Grease1 x Instructions1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FOR MULTIPLE VEHICLES AudiA31.8 TFSi1.8T2.0 FSiTDieselS31.8T (8L Chassis)2.0 FSiT (8P Chassis)2.0 TSI (8V Chassis)TTMk1150/180BHP210/225BHPMk22.0DieselTTSMk3 8S (2014-2021)SeatLeonMk1 1998-2005Cupra 1.8TCupra R 1.8TMk2 2005-2012Cupra 2.0 TFSiSkodaOctavia1.8T2.0 FSiTDieselVolkswagenBora (1998-2005)EOSGolfMK41.8TDieselR32MK5DieselED30GTIR32MK6ED35GTIRMK7GTIGTI Clubsport ED40RMK7.5GTI RJettaMK7 (2018-2021)2.0 GLIMK7.5 (2021-)2.0 GLIPassat1.8T2.0 FSiTSciroccoRTiguan 2.0 FSiT

Read more less

6 Speed Adjustable Quick Shifter for Audi, VW, SEAT, and Skoda This quickshifter, once installed, will allow you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving. You can personally customise the throw to suit your own preference, due to an infinitely adjustable pivot mechanism. This wide range of adjustment should allow for adjustment from stock to a 40% decrease in shifter throw. Click on the 'fitting guide' tab above, for detailed instructions. This unit will fit all VAG 6 speed gear boxes as found in the 'compatible vehicles' tab above. This product is supplied with two sizes of pin, and one ball fitment, to ensure that it will match the various possible cables found on these vehicles. To ensure that this product functions correctly and does not stress associated components, it is essential that the linkage cables are re-adjusted after the installation of this product, as per the fitting instructions. Please note: This does not fit the Skoda Fabia/VW Polo/SEAT Ibiza/1.9 diesel applications.    In The Box:1 x FMVWQS Shifter1 x 8.4mm Pin1 x 10mm Pin1 x Ball Pin1 x 8mm Nut1 x Bent Nail1 x Bag of Grease1 x Instructions1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. For Multiple Cars AudiA3  1.8 TFSi  1.8T  2.0 FSiT  DieselS3  1.8T (8L Chassis)  2.0 FSiT (8P Chassis)  2.0 TSI (8V Chassis)TT  Mk1     150/180BHP      210/225BHP  Mk2      2.0     DieselMk3    2.0 TSI 2015 OnwardsCupra   Ateca 2.0 TSISeat   Altea        Leon          Mk1 1998-2005           Cupra 1.8T           Cupra R 1.8T        Mk2 2005-2012           Cupra 2.0 TFSi           Diesel        Mk3 2012-2020        Cupra 280/290/300RSkoda Octavia     1.8T     2.0 FSiT     DieselVolkswagen Bora (1998-2005)      EOSGolf      MK4       1.8T       Diesel       R32      MK5        Diesel        ED30        GTI        R32   MK6      1.4 Turbo      ED35      GTI      R  MK7      GTI      GTI Clubsport ED40      R  MK7.5     GTI      RJetta     MK7 (2018-2021)      2.0 GLI      MK7.5 (2021-)      2.0 GLIPassat     1.8T     2.0 FSiT  Scirocco     R     2.0 up to 2016Tiguan     2.0 FSiT

Read more less