09 Design

The ZERONINE Design carbon induction kit for Mk8 Fiesta ST (pre- and post-facelift) and Puma ST includes a beautifully engineered HVF (High Volume Flow) carbon fibre air filter housing, which thanks to its natural heat-resistant properties and combined with the supplied dual-entry air filter, provides virtually un-compromised airflow to your 3-cylinder turbocharged engine. This kit includes an enlarged 73.5mm internal bore matt-finish carbon fibre filter assembly that evenly distributes cold air being drawn in from the dual-entry air filter and factory front air feed, as well as acting as a thermal barrier, shielding the filter from unwanted engine bay heat. Engineered to deliver the ultimate performance and sound upgrade for owners of Mk8 Fiesta ST pre-facelift, Mk8.5 Fiesta ST post-facelift and Puma ST models that wish to use an open-cone setup. Suitable for vehicles at all stages of power output - recommended for vehicles running in excess of 250PS / 350Nm. Note: as carbon fibre is a man-made manufacturing process, small differences in the finish of parts is completely normal.  THE ULTIMATE INDUCTION KIT Fit, function and form - we've got you covered The ZERONINE Design carbon fibre assembly is fully rubber mounted to provide compliance to the native engine movement, preventing unwanted interference or rubbing. It's also supplied with a carbon air feed, a lower air feed hose and a larger-bore silicone induction hose to ensure maximum cold air in and out of the filter housing, with minimal pressure drop. THE THERMAL ADVANTAGE The ultimate induction kit Owners looking for the maximum airflow and minimal heat soak from an open cone induction system, need look no further.Thanks to the carefully CFD optimised large-bore carbon intake and air feed, together with our bespoke dual-entry air filter, this kit delivers maximum cold air where it matters, with minimal pressure drop - and thanks to the natural thermal properties of carbon fibre, you get an in-built heatshield, too.Typical gains of 10bhp and 12Nm can be expected on vehicles running higher states of tune, although the HVF carbon induction kit also works with standard vehicles. EVERYTHING YOU NEED, NOTHING YOU DON'T The most comprehensive open-cone kit available From the beautifully designed carbon air filter assembly and carbon air feed, to the heatshield, silicone hose and lower air feed hose... through to the bobbins, bolts and billet bracket, this induction kit blends performance with straightforward installation, so you upgrade your performance and enjoy the benefits straight out of the box. WHAT'S IN THE BOX? Included with every carbon induction kit Assembly Required:• Carbon fibre HVF filter assembly (includes 09Design badge)• Carbon fibre air feed• High-flow silicone induction hose• Lower air feed ducting• Heatshield• Machined aluminium mounting bracket• All required installation hardware (rubber bobbins, bolts)

Read more less

ZERONINE DESIGN performance air filter for the Mk3 Focus RS/ST is a high-quality replacement option for owners that demand the maximum performance increase, perfect fitment and an enhanced induction noise, whilst retaining their original OE air intake system.By using a lightly-oiled synthetic cotton gauze material that we call Hyperflow™, ZERONINE DESIGN air filters provide the ultimate in both airflow and filtration properties plus, thanks to a multi-stage manufacturing process, our filters also result in virtually no seepage of the frame material into the filter media. That also translates to a larger comparable filter area and more surface airflow than the equivalent sized filters from some other well-known brands. Compatible Models: Mk2 Focus RS/RS500Mk3 Focus STMk3 Focus RS 

Read more less

POWER: 329BHP / 438FTLB The ZERONINE DESIGN Stage 01 power upgrade for the Mk4/Mk4.5 Focus ST manual and automatic transmissions provides a substantial uplift in both power and torque across the entire rev-range, adds a host of new functionality and improves outright performance, drivability and enjoyment. As with all ZERONINE DESIGN upgrades, every product has to pass our own stringent durability testing, which includes thousands of both track and road-mile accumulation whilst monitoring key powertrain and drivetrain parameters. When it comes to performance calibrations, we have decades of experience at both OE and the highest level of motorsport under our belts, so you can be assured that regardless of how you drive your car, or what octane fuel you want to use, a ZERONINE DESIGN calibration will deliver OE-like drivability with robust, reliable performance, lap-after-lap, mile after mile. PERFORMANCE YOU CAN TRUST The ZERONINE DESIGN Stage 01 performance calibration delivers a substantial, yet safe increase in power and torque across the rev-range of both manual and automatic transmission models.Dyno-verified gains of upto 113Ftlb and 72HP completely transform the driving dynamics when compared to the OE calibration.Power output may vary based on individual vehicle condition, fuel grade and method of dynamometer testing. THE POWER'S IN YOUR HANDS Quite literally in this case, as the ZERONINE DESIGN FLASHlink upgrade allows you to easily DIY install and update calibrations to your ECU using nothing more than our app, the supplied Bluetooth OBD interface and your Smartphone; no laptop, cables or handset required. The latest version of FLASHlink also provides additional functionality allowing you to select configurable gauge displays using the OBD data-stream, carry out comprehensive data-logging and there's also a built-in performance meter for good measure.Once updated, you can also use the in-car MODE button to turn slippery mode into an Economy mode to help save fuel, as well as help with traction in extreme conditions.There's also the addition of an immobiliser calibration which as the name suggests prevents the vehicle from being started and driven when enabled. WHAT'S IN THE BOX? INCLUDED WITH STAGE 01 • ZERONINE DESIGN performance calibration, standard calibration and immobiliser calibration (downloaded to phone / tablet after purchase)• ZERONINE DESIGN Bluetooth OBD adaptor• ZERONINE DESIGN zip-up case• ZERONINE DESIGN vehicle badge

Read more less

The ZERONINE Design HVF (High Volume Flow) charge pipe upgrade kit for the Mk4 Focus ST removes multiple restrictions found in the OE air charge components, substantially improving airflow and reducing the pressure-drop across the charge system. The OE components feature multiple complex sections which taper down or narrow in diameter by as much as 50% and uses a restrictive sound resonator section - all of which inhibit airflow and cause unwanted pressure buildup. The ZERONINE Design HVF version has been carefully designed as a direct swap for the OE setup and is supplied with everything needed to help increase airflow by more than 60%.Finished in a durable deep black anodised finish with matching black silicone hoses and jubilee clips, the HVF charge pipe is a must-have addition for those wanting to improve the performance and efficiency of their engine and to give a degree of headway to the turbocharger when optimising peak engine power and torque output. Note: - Our Charge Pipe Kit is designed to work in conjunction with the OEM recirculating valve. If you intend to fit an aftermarket BOV then please contact us first to confirm fitment. - When installing this kit, you need to re-use the OE seal found in the standard upper hard pipe. GO WITH THE FLOW The complete charge pipe solution Removing several inherent OE airflow restrictions and a sound resonator, the ZERONINE Design HVF charge pipe kit provides a free-flowing, larger bore option for unhindered airflow and a pressure-drop reduction for improved turbo and engine performance and efficiency WHAT'S IN THE BOX? Included hardware • HVF aluminium upper hard pipe• HVF aluminium lower hard pipe• Silicone hoses• 6 x Jubilee clips

Read more less

The ZERONINE Design lower pitch control mount for Mk8/Mk8.5 Fiesta ST and Puma ST reduces the amount of engine roll / movement experienced during hard acceleration and gear changes. It also helps reduce 'wheel-hop', which is particularly evident in vehicles with increased power and torque outputs. Product Features: Engineered and optimised for Fiesta ST (pre- and post-facelift) and Puma ST models High quality lightweight 6000-series billet aluminium body Bespoke size and shore hardness polyurethane bushes Reduction in engine movement  Minimal effect on NVH Suggested torque settings: Subframe: 50Nm | Gearbox side: 45Nm LIMITING ENGINE ROCK FOR ENHANCED TRACTION AND THROTTLE RESPONSE Perfecting the fine balance between engine movement and NVH Correct design and material selection is essential with a product such as this to ensure NVH (Noise, Vibration and Harshness) doesn't spoil your overall enjoyment and general driving pleasure.ZERONINE Design have the knowledge and engineering expertise to create a product which can reduce the engine movement by the desired amount, but with minimal effect to the NVH - with many similar designs and thousands of products already in the market under third-party brand names, we've encompassed everything learned along the way to create our best performing, most reliable and lightest roll restrictor to-date. NOT JUST YOUR AVERAGE POLYURETHANE, PERFECTLY BALANCED SHORE HARDNESS A fine blend of repeatable performance and longevity The ZERONINE Design roll restrictor features a unique size and mixed shore hardness of polyurethane bushes to increase stiffness and reduce transmission movement, without causing excessive NVH. LIGHTWEIGHT YET STRONG,MACHINED FROM 6000 SERIES ALLOY Designed and assembled in the U.K. Our functional yet aesthetically pleasing billet body combines the best in performance, durability and lightweight design.All of our roll restrictors are designed, quality-checked and assembled in the heart of the U.K. WHAT'S IN THE BOX? Components included with this product Our lower engine mount (roll-restrictor) is supplied pre assembled, ready for installation once the old existing mount is removed. No tools are supplied within the kit.Supplied Partially Assembled:• Front Mounting Pin• Rear Mounting Pin• Engine Mount Body• Front Bush Pair• Rear Bush Pair

Read more less

The ZERONINE Design lux fitted mat set adds a luxurious touch to the interior of your RHD mk8/8.5 Fiesta ST. Featuring an extra thick pile for durability, both front mats feature ZERONINE Design branding with grey piping, whilst the drivers mat includes the OE push down fittings to secure them in place properly. Features: Extra thick lux spec mat Fitted mat set for front and rear (4 mats) ZERONINE Design embroidered on driver and passenger side Grey detail stitching Retains OE fittings for simple installation

Read more less

The ZERONINE DESIGN HFW (High Volume Flow) carbon fibre crossover pipe replaces the OE unit with a free-er flowing, heat-resistant unit which not only boosts airflow, but also significantly enhances engine bay aesthetics and induction noise. The complete kit includes a mounting bracket, two silicone induction hoses and the hose clamps required for a neat and easy installation with either the OE airbox - for those who like their induction noise a little more on the subtle side, or the ZERONINE DESIGN carbon fibre induction kit - for those seeking the ultimate performance, acoustic and aesthetically pleasing induction upgrade available for this platform. The OE engine cover can also be retained. Although care should be taken during installation to ensure the silicone hoses are fitted to the carbon pipework before mounting on the vehicle, the ZERONINE DESIGN carbon crossover pipe also features a reinforced mounting bracket and carbon breather support as standard, making it the number one choice for owners wanting the best in terms of both performance and durability.Note: as carbon fibre is a man-made manufacturing process, small differences in the finish of parts is considered completely normal.To prevent damage during installation, please ensure the silicone hoses are fitted to the carbon rear intake before connecting to the rest of the induction system. WHAT'S IN THE BOX? Included with this upgrade • HVF Carbon Crossover Pipe assembly• x2 Silicone hose couplers• x4 hose clips

Read more less

The ZERONINE Design carbon induction kit for Mk4/Mk4.5 Focus ST and Focus ST-line 1.5-litre model features a beautifully engineered HVF (High Volume Flow) carbon fibre air filter housing, which thanks to its natural heat-resistant properties and combined with the supplied dual-entry air filter, provides virtually un-compromised airflow to your 2.3-litre EcoBoost engine. This kit includes an enlarged 73.5mm bore matt-finish carbon fibre air filter assembly that evenly distributes cold air being drawn in from the dual-entry air filter and factory front air feed, as well as acting as a thermal barrier, shielding the filter from unwanted engine bay heat. In addition to the front feed, this kit also includes a lower air-feed hose which mounts to a cold air entry point in the bottom of the heat shield and picks up an additional cold air feed from a low-pressure area behind the bumper. Engineered to deliver the ultimate open-cone solution for owners wanting maximum performance, an engineered acoustic output and unrivalled aesthetic improvements. Suitable for vehicles at all stages of tune from standard power output to 400PS+ / 560Nm+. Note: as carbon fibre is a man-made manufacturing process, small differences in the finish of parts is considered completely normal.  THE ULTIMATE INDUCTION KIT Fit, function and form - we've got you covered The ZERONINE Design carbon fibre assembly is fully rubber mounted to provide compliance to the native engine movement, preventing unwanted interference or rubbing.It's also supplied with a carbon air feed, a lower air feed hose to ensure maximum cold air in and out of the filter housing, with minimal pressure drop.   THE THERMAL ADVANTAGE The ultimate induction kit Owners looking for the maximum airflow and minimal heat soak from an open cone induction system, need look no further.Thanks to the carefully CFD optimised large-bore carbon intake and air feed, together with our bespoke dual-entry air filter, this kit delivers maximum cold air where it matters, with minimal pressure drop - and thanks to the natural thermal properties of carbon fibre, you get an in-built heatshield, too.Substantial increases in both power and torque can be expected on vehicles running higher states of tune, although the HVF carbon induction kit also works with standard vehicles. EVERYTHING YOU NEED, NOTHING YOU DON'T The most comprehensive open-cone kit available From the beautifully designed carbon air filter assembly and carbon air feed, to the heatshield and lower air feed hose (manual transmission only)... through to the bobbins and bolts, this induction kit blends performance with straightforward installation, so you upgrade your performance and enjoy the benefits straight out of the box. WHAT'S IN THE BOX? Included with every carbon induction kit Assembly Required:• Carbon fibre HVF filter assembly (includes 09Design badge)• Carbon fibre air feed• Heatshield• Lower air feed (manual transmission only)• Installation hardware (rubber bobbins, bolts)

Read more less

The ZERONINE Design HVF (High Volume Flow) rear intake kit for the Mk8 Fiesta ST and Puma ST has been developed to enhance airflow to the turbocharger and improve engine bay aesthetics. At the heart of the kit is a large-bore mandrel bent aluminium crossover pipe, which helps reduce the pressure drop across the intake system and is supplied with a silicone coupler hose and jubilee clips. To fully maximise performance and reduce any detrimental engine bay heat soak due to the proximity to the turbocharger, the ZERONINE Design HVF rear intake kit is also supplied with our high-performance thermal blanket.The perfect companion to our carbon induction kit and for those who simply want to fully optimise their intake setup.  Product Features: Increased airflow  Easy installation Polished anodised black finish Silicone coupler hose Supplied with hose clips Supplied with thermal blanket WHAT'S IN THE BOX? Included hardware • High-flow rear intake pipe (anodised black finish)• Silicone hose• 2x Hose clips• Zero9 Design Thermal blanket and retaining springs

Read more less

The ZERONINE Design performance panel air filter for the is a high quality replacement option for owners that demand the maximum performance increase, exacting fitment and an improved induction noise, whilst retaining the original factory airbox.By using a lightly-oiled synthetic cotton gauze material that we call Hyperflow™, ZERONINE Design air filters provide the ultimate in both airflow and filtration properties plus, thanks to a multi-stage manufacturing process, our filters also result in virtually no seepage of the frame material into the filter media. For our customers, that means a larger comparable filter area and more airflow than the equivalent sized filters from some other well-known brands.

Read more less

POWER: 325 BHP / 320FTLB The ZERONINE DESIGN Stage 01 power upgrade for the Gen1 Yaris GR provides a substantial uplift in both power and torque across the entire rev-range, adds a host of new functionality and improves outright performance, drivability and overall driving enjoyment. As with all ZERONINE DESIGN upgrades, every product has to pass our own stringent durability testing, which includes thousands of both track and road-mile accumulation whilst monitoring key powertrain and drivetrain parameters. When it comes to performance calibrations, we have decades of experience at both OE and the highest level of motorsport under our belts, so you can be assured that regardless of how you drive your car, or what octane fuel you want to use, a ZERONINE DESIGN calibration will deliver OE-like drivability with robust, reliable performance, lap-after-lap, mile after mile. PERFORMANCE YOU CAN TRUST The ZERONINE DESIGN Stage 01 performance calibration delivers a substantial, yet safe increase in power and torque across the rev-range. Dyno-verified gains of upto 73Ftlb and 75HP transform the driving dynamics when compared to the OE calibration, with the 0-60mph sprint arriving in just 4.1secs!Power output may vary based on individual vehicle condition, fuel grade and method of dynamometer testing. THE POWER'S IN YOUR HANDS Quite literally in this case, as the ZERONINE DESIGN FLASHlink upgrade allows you to easily DIY install and update calibrations to your ECU using nothing more than our app, the supplied Bluetooth OBD interface and your Smartphone; no laptop, cables or handset required. The latest version of FLASHlink also provides additional functionality allowing you to select configurable gauge displays using the OBD data-stream, carry out comprehensive data-logging and there's also a built-in performance meter for good measure.Yaris GR owners also benefit from additional functionality as part of the Stage 01 calibration that take your enjoyment to new-found levels; these include the ability to enable (from the steering wheel) launch control - just push and hold a button to enable. In addition, there's also a rolling launch control feature, which works in the same way, allowing for enhanced acceleration whilst moving.An immobiliser calibration is also included, which as the name suggests prevents the vehicle from being started and driven when enabled. WHAT'S IN THE BOX? INCLUDED WITH STAGE 01 • ZERONINE DESIGN performance calibration, standard calibration and immobiliser calibration (downloaded to phone / tablet after purchase)• ZERONINE DESIGN Bluetooth OBD adaptor• ZERONINE DESIGN zip-up case• ZERONINE DESIGN vehicle badge

Read more less

POWER: 390 BHP / 445FTLB Unlock the hidden potential of your Ford Ranger Raptor 3.0T V6 EcoBoost (2022 onwards, UK / EU models only) with our Flashlink Stage 01 Software.Developed entirely in-house by 09Design’s calibration engineers, this upgrade transforms your vehicle’s performance from the factory 290bhp / 360FtLb to an impressive 390bhp / 445FtLb.Our software is developed by experienced calibration engineers with OEM and aftermarket backgrounds, extensively tested on-road and off-road over thousands of miles in multiple environments. Each calibration is refined for optimal reliability, performance, and drivability across varied fuel grades and driving styles.Because we control development end-to-end, we can also provide custom adaptations to suit customer preferences or vehicles fitted with performance hardware such as intercoolers or intakes. KEY FEATURES & ADVANTAGES +100bhp / +85FtLb gain - significant uplift in responsiveness and acceleration. In-house development - OEM-trained calibrators with full control over every file. Thorough testing - road and off-road validation for consistent reliability. Adaptable calibration - tailored for supporting hardware and user preference. UK / EU specific software - ensures full compatibility with regional ECU variants. TECHNICAL DATA, TESTING AND QUALITY ASSURANCE OEM-grade expertise: Developed by engineers with OEM and aftermarket experience. Structured validation: Each release undergoes baseline checks, revision testing, and data-logged verification over thousands of road and off-road miles. Fuel & climate coverage: Tested on UK / EU fuels and across ambient temperatures to guarantee drivability year round. Safety strategies retained: Factory knock control, torque monitoring, and component protection are preserved and re-balanced for performance. Drivability first: Smooth throttle mapping and predictable torque delivery for real-world use. Change control: Version-controlled files with your stock read securely archived. Transparent diagnostics: Fault codes are not masked; hardware issues can be identified and resolved properly. Aftercare & support: Post-flash log reviews and refinements available via info@09design.com PERFORMANCE YOU CAN TRUST The ZERONINE DESIGN Stage 01 performance calibration delivers a substantial, yet safe increase in power and torque across the rev-range. Dyno-verified gains of upto 85Ftlb and 100HP transform the driving dynamics when compared to the OE calibration, transforming your Ranger Raptor into the truck you really wanted from the factory!Power output may vary based on individual vehicle condition, fuel grade and method of dynamometer testing. THE POWER'S IN YOUR HANDS Quite literally in this case, as the ZERONINE DESIGN FLASHlink upgrade allows you to easily DIY install and update calibrations to your ECU using nothing more than our HP Tuners partner app, the supplied Bluetooth OBD interface and your Smartphone; no laptop, cables or handset required. The latest version of FLASHlink also provides additional functionality allowing you to select configurable gauge displays using the OBD data-stream, carry out comprehensive data-logging and there's also a built-in performance meter for good measure.There's also the addition of an immobiliser calibration which as the name suggests prevents the vehicle from being started and driven when enabled. CONFIRMED APPLICATIONS • Ranger Raptor 3.0T V6 Ecoboost - European Models only• Not suitable for US or AU domestic market.

Read more less

POWER: 200 BHP / 210FTLB The ZERONINE DESIGN Stage 01 power upgrade for the Mk3 Kuga 1.5 manual and automatic transmission models, provides a substantial uplift in both power and torque across the entire rev-range, adds a host of new functionality and improves outright performance, drivability and overall driving enjoyment. As with all ZERONINE DESIGN upgrades, every product has to pass our own stringent durability testing, which includes thousands of both track and road-mile accumulation whilst monitoring key powertrain and drivetrain parameters. When it comes to performance calibrations, we have decades of experience at both OE and the highest level of motorsport under our belts, so you can be assured that regardless of how you drive your car, or what octane fuel you want to use, a ZERONINE DESIGN calibration will deliver OE-like drivability with robust, reliable performance, lap-after-lap, mile after mile. THE POWER'S IN YOUR HANDS Quite literally in this case, as the ZERONINE DESIGN FLASHlink upgrade allows you to easily DIY install and update calibrations to your ECU using nothing more than our app, the supplied Bluetooth OBD interface and your Smartphone; no laptop, cables or handset required. The latest version of FLASHlink also provides additional functionality allowing you to select configurable gauge displays using the OBD data-stream, carry out comprehensive data-logging and there's also a built-in performance meter for good measure. There's also the addition of an immobiliser calibration which as the name suggests prevents the vehicle from being started and driven when enabled. WHAT'S IN THE BOX? INCLUDED WITH STAGE 01 • ZERONINE DESIGN performance calibration, standard calibration and immobiliser calibration (downloaded to phone / tablet after purchase)• ZERONINE DESIGN Bluetooth OBD adaptor• ZERONINE DESIGN zip-up case• ZERONINE DESIGN vehicle badge

Read more less

POWER: 275 BHP / 336FTLB The ZERONINE DESIGN Stage 01 power upgrade for the Mk3 Focus ST provides a substantial uplift in both power and torque across the entire rev-range, adds a host of new functionality and improves outright performance, drivability and overall driving enjoyment. As with all ZERONINE DESIGN upgrades, every product has to pass our own stringent durability testing, which includes thousands of both track and road-mile accumulation whilst monitoring key powertrain and drivetrain parameters. When it comes to performance calibrations, we have decades of experience at both OE and the highest level of motorsport under our belts, so you can be assured that regardless of how you drive your car, or what octane fuel you want to use, a ZERONINE DESIGN calibration will deliver OE-like drivability with robust, reliable performance, lap-after-lap, mile after mile. PERFORMANCE YOU CAN TRUST The ZERONINE DESIGN Stage 01 performance calibration delivers a substantial, yet safe increase in power and torque across the rev-range of both manual and automatic transmission models.Dyno-verified gains of upto 55FtLb and 21HP completely transform the driving dynamics when compared to the OE calibration.Power output may vary based on individual vehicle condition, fuel grade and method of dynamometer testing. THE POWER’S IN YOUR HANDS Quite literally in this case, as the ZERONINE DESIGN FLASHlink upgrade allows you to easily DIY install and update calibrations to your ECU using nothing more than our app, the supplied Bluetooth OBD interface and your Smartphone; no laptop, cables or handset required. The latest version of FLASHlink also provides additional functionality allowing you to select configurable gauge displays using the OBD data-stream, carry out comprehensive data-logging and there's also a built-in performance meter for good measure. There's also the addition of an immobiliser calibration which as the name suggests prevents the vehicle from being started and driven when enabled. WHAT’S IN THE BOX? INCLUDED WITH STAGE 01 • ZERONINE DESIGN performance calibration, standard calibration and immobiliser calibration (downloaded to phone / tablet after purchase)• ZERONINE DESIGN Bluetooth OBD adaptor• ZERONINE DESIGN zip-up case• ZERONINE DESIGN vehicle badge

Read more less

***Special Order Item Only. Contact us for more details. ETA 4-6 Weeks*** Unlock the true potential of your Mk3 Ford Focus RS with our ZERONINE DESIGN Fast Flow Catalyst Downpipe. Precision engineered to optimise turbo response, increase horsepower, and deliver a more aggressive exhaust note. Key Features:•    Vehicle-Specific Fitment: Custom designed for the 2016–2018 Mk3 Ford Focus RS for seamless integration with OEM or aftermarket exhaust systems.•    High Flowing 200 Cell Sports Cat: Maintains emissions compliance while drastically improving exhaust flow compared to the stock unit.•    T304 Stainless Steel Construction: Corrosion-resistant, TIG-welded tubing ensures durability and long-lasting performance under high heat and pressure.•    Mandrel-Bent Design: Smooth, uninterrupted bends maximise flow and minimise turbo lag.•    Performance Boost: Expect quicker spool times, improved throttle response, and gains of up to 15–20 horsepower when tuned.•    Enhanced Sound: Adds a deeper, more aggressive exhaust tone without excessive drone.Whether you're tuning for track days or spirited street driving, the Fast Flow Catalyst Downpipe is the essential first step in your Focus RS performance journey.

Read more less

POWER: 376 BHP / 405FTLB The ZERONINE DESIGN Stage 01 power upgrade for the Mk3 Focus RS provides a substantial uplift in both power and torque across the entire rev-range, adds a host of new functionality and improves outright performance, drivability and overall driving enjoyment. As with all ZERONINE DESIGN upgrades, every product has to pass our own stringent durability testing, which includes thousands of both track and road-mile accumulation whilst monitoring key powertrain and drivetrain parameters. When it comes to performance calibrations, we have decades of experience at both OE and the highest level of motorsport under our belts, so you can be assured that regardless of how you drive your car, or what octane fuel you want to use, a ZERONINE DESIGN calibration will deliver OE-like drivability with robust, reliable performance, lap-after-lap, mile after mile. PERFORMANCE YOU CAN TRUST The ZERONINE DESIGN Stage 01 performance calibration delivers a substantial, yet safe increase in power and torque across the rev-range. Dyno-verified gains of upto 37Ftlb and 31HP transform the driving dynamics when compared to the OE calibration.Power output may vary based on individual vehicle condition, fuel grade and method of dynamometer testing. THE POWER'S IN YOUR HANDS Quite literally in this case, as the ZERONINE DESIGN FLASHlink upgrade allows you to easily DIY install and update calibrations to your ECU using nothing more than our app, the supplied Bluetooth OBD interface and your Smartphone; no laptop, cables or handset required. The latest version of FLASHlink also provides additional functionality allowing you to select configurable gauge displays using the OBD data-stream, carry out comprehensive data-logging and there's also a built-in performance meter for good measure.Focus RS owners also benefit from additional functionality as part of the Stage 01 calibration that take your enjoyment to new-found levels; these include the ability to enable (from the steering wheel) downshift blip - to help rev-match on downshifts, no-lift shift functionality - for faster gear changes and also, owner configurable rpm values (set via the app) for launch control - where you can choose the revs you wish to use when launch control is active.There's also the addition of an immobiliser calibration which as the name suggests prevents the vehicle from being started and driven when enabled. WHAT'S IN THE BOX? INCLUDED WITH STAGE 01 • ZERONINE DESIGN performance calibration, standard calibration and immobiliser calibration (downloaded to phone / tablet after purchase)• ZERONINE DESIGN Bluetooth OBD adaptor• ZERONINE DESIGN zip-up case• ZERONINE DESIGN vehicle badge

Read more less

Delivering the ultimate in stopping performance for owners of the Mk3 Focus RS is the ZERONINE Design lightweight brake upgrade, consisting of 6-piston T-6066 forged monobloc calipers and a fully-floating grooved 380x34mm FH25 cast carbon steel disc-bell assembly. This brake upgrade has been engineered specifically for the Focus RS based on owner's typical performance requirements, wheel clearance, aesthetics and with optimal pedal modulation in mind - delivering everything you could want in terms of fast-road braking performance, combined with substantial weight-saving and the impressive aesthetic enhancement. Note: The kit will fit under the ZERONINE Design Estrema and 909 Forged wheel options without the need for spacers. To clear OE wheels, you will need a minimum 10mm wheel spacer. FORGED MONOBLOCK CALIPERS ENABLING YOU TO CONSISTENTLY BRAKE LATER AND HARDER The ultimate brake caliper construction The 6-piston forged monobloc caliper is machined from a more expensive - and more durable, T6-6066 series aluminium, before being treated to our durable RS blue finish, with the whole caliper assembly weighting just 2.3kg! FC25 CARBON STEEL, TWO-PIECE FLOATING ROTOR DESIGN Constant, reliable braking under extreme pressure As with our calipers, our rotors are equally feature-rich and crafted from the best materials available for the intended useROTORSProduced from FC-25 steel mixed with carbon, this blend of materials helps to minimise expansion rates under extreme heat, minimising the chance of permanent distortion which can occur under extreme use. Our unique grooved design also helps to deglaze pads and maintain the optimal braking surfaceBELLSUsing a proprietary fully-floating bobbin drive system means you get the ultimate in performance, whilst the T6-6066 aluminium bell is treated to our durable black anodised finish A RANGE OF BRAKE PADS TO SUIT DRIVING STYLES AND APPLICATIONS THE IMPORTANCE OF SELECTING THE CORRECT PADWhether your car spends its life on the road or is used regularly on track, selecting the correct pad compound is critical to ensure optimal performance and component longevity.Our premium ZERONINE Design brake upgrades are supplied with our exclusive fast-road pad compound as standard which maximises braking performance, provides excellent stopping attributes from cold, all whilst maintaining an acceptable level of noise and brake dust plus, are fully R90 approved for road use.For owners that wish to use their car on a track day, an appropriate track pad should be used. We recommend using the EBC RP-X pads (our part code SUN013) for the perfect track focused braking system for your car. WHAT'S IN THE BOX? Included with every brake upgrade kit Supplied Assembled:• FBR018 - Brake Rotor Pair• FBR012 - Disc Bell To Rotor Fitting Kit.• FBR026 - Brake Disc Bell Pair.• FBR002 - LH 6 pot Brake Caliper(RS blue finish)• FBR003 - RH 6 Pot Brake Caliper(RS blue finish)• FBR004 - LH Caliper Mounting Bracket.• FBR005 - RH Caliper Mounting Bracket• FBR006 - Brake Line Pair.

Read more less

Get accurate subframe alignment on your Focus RS with the ZERONINE Design subframe lock down kit.The OE subframe assembly tolerance allows for ease of installation during the build process, but this means that it's also quite common to find vehicles subframe's considerably out of alignment - and if your subframe is ever removed, it's almost impossible to put it back to its original location. the ZERONINE Design lock down kit ensures this tolerance is more tightly controlled and ensures that all subframe elements are properly centralised.  Once your geometry's set with the lock down kit in place, you can be assured of optimum handling and geometry alignment - regardless of if the subframe is subsequently removed at a later stage. WHAT'S IN THE BOX? Included with this upgrade • Set of four front subframe locking inserts

Read more less

The ultimate performance lowering spring upgrade for Mk3 Focus RS owners that want to improve their car's handling and aesthetics, without any compromise on the ride quality. Tested and validated across thousands of miles of daily use, fast-road and track-based driving, the ZERONINE Design sport lowering spring kit provides a noticeable drop in ride-height (10mm front | 15mm rear) for improved cornering ability, whilst still ensuring comfort and compliance is retained for everyday use. WHAT'S IN THE BOX? Included with each kit • Front L/H spring• Front R/H spring• Rear L/H spring• Rear R/H spring

Read more less

The ZERONINE Design lower pitch control mount for Mk2 and Mk3 Focus ST and RS models reduces the amount of engine roll / movement experienced during hard acceleration and gear changes. It also helps reduce 'wheel-hop', which is particularly evident in vehicles with increased power and torque outputs. Correct design and material selection is essential with a product such as this to ensure NVH (Noise, Vibration and Harshness) doesn't spoil your overall enjoyment and general driving pleasure. Product Features: Engineered and optimised for Focus ST and RS models High quality 6000 series billet aluminium body Bespoke size and shore hardness polyurethane bushes Reduction in engine movement  Minimal effect on NVH Compatible Models: Mk3 Focus RS 2.3-litre EcoBoostMk3 Focus ST 2-litre EcoBoostMk2 Focus ST 2.5-litre Mk2 Focus RS 2.5-litre

Read more less

The ZERONINE DESIGN Performance Intercooler for the Mk3 Focus RS is a high-efficiency, direct-fit upgrade engineered to offer a significant improvement in charge air cooling, this intercooler is ideal for fast road cars, tuned vehicles, or those preparing for more demanding use.Our uprated intercooler features a substantially larger core volume than the standard Ford item, offering improved thermal efficiency and reduced intake temperatures even under sustained load. Enhancing performance further is the optimised cast end tanks, complete with larger ports for increased flow and an internal deflector for enhanced airflow management into the core - we also include larger bore silicone hoses as part of the kit.Whether you're increasing boost levels or simply want to maintain your engine's performance and stop it from derating when hot, this is the solution built for reliability and performance.Key Features and Performance Advantages:• Larger Core for Better Cooling – A high-flow, bar-and-plate core with greatly increased surface area helps manage charge temps more effectively than the restrictive OE unit.• Oversized Inlet & Outlet Ports – We’ve increased port sizing over the factory design to promote smoother airflow and support higher horsepower levels with less pressure drop.• Larger bore silicone boost hoses supplied as standard with this kit• Flow-optimised Cast End Tanks – Designed to reduce turbulence and distribute airflow evenly across the core for consistent charge temps across all cylinders.• Fully CNC-Machined Flanges – Ensures perfect sealing and fitment every time, no compromise.• Factory Fitment with Performance Gains – Bolts directly to OEM mounting points with no cutting or fabrication required.• Powder Coated Finish for Durability – Resists corrosion and offers a clean, stealthy aesthetic behind the bumper.Why Upgrade to the 09D Intercooler?The factory intercooler is built to meet minimum requirements. It doesn’t take much additional power or heat to push it beyond its limits, especially during back-to-back runs or warm climate use. Our solution addresses these issues by:- Lowering intake air temps to improve combustion efficiency.- Reducing heat soak during prolonged driving.- Supporting future power upgrades thanks to the larger core volume and port sizing.- Maintaining response and drivability with minimal pressure drop. WHAT'S IN THE BOX? Included with this upgrade • High Performance Alloy Intercooler• Large Bore Inlet and Outlet Silicone Hose Set

Read more less

The ZERONINE Design grooved front brake disc upgrade for the Mk3 Focus RS features a thermic coating to prevent corrosion on non-friction surfaces and a precision-machined dual 11-groove design, to help deglaze the brake pad face and promote even pad wear. The vented disc design optimises cooling and helps maintain a stable disc temperature and all of the features combined, greatly improve stopping performance versus the OE disc.The perfect performance replacement disc for owners wanting to retain their OE braking setup, whilst enhancing stopping performance and aesthetics. Can be used with OE brake pads, or for optimal results, match with our ZERONINE Design fast road pad upgrade.

Read more less

09D Performance Brake Pad Set – Replacement Pads for Fast Road Use.The 09D Performance Brake Pad Set is the exact replacement for the OEM brake pads, carefully developed to deliver outstanding stopping power, consistent pedal feel, and everyday drivability for fast road applications. Designed with spirited driving in mind, these pads offer a high-friction compound that provides strong and responsive braking in real-world road conditions, including cold starts, heavy braking, and repeated use during enthusiastic driving.Key Features & Fitment: • Strong Initial Bite – Delivers a sharp, confident braking response from cold, ideal for day-to-day use and performance driving on the road.• High Friction for Confident Braking – Balanced compound ensures reliable stopping power during sudden braking or repeated deceleration during spirited driving.• Smooth, Progressive Pedal Feel – Offers excellent modulation, allowing drivers to easily control braking pressure with precision and confidence.•  Low Dust Formula – Helps keep wheels cleaner and minimises wear on the discs, contributing to longer component life and reduced maintenance.• Quiet Operation – Engineered with anti-noise shims and vibration damping for a quiet, refined braking experience, even under aggressive use.Optimised for Fast Road DrivingPerfect for drivers who demand more from their brakes during everyday and enthusiastic road use, these pads are tuned for performance, consistency, and reliability in a wide range of real-world conditions. They provide a noticeable upgrade in stopping power and feel over standard pads without compromising comfort or usability.

Read more less

The ZERONINE Design lux fitted mat set adds a luxurious touch to the interior of your RHD Mk3 Focus RS. Featuring an extra thick pile for durability, both front mats feature ZERONINE Design branding with grey piping, whilst the drivers mat includes the OE push down fittings to secure them in place properly. Features: Extra thick lux spec mat Fitted mat set for front and rear (4 mats) ZERONINE Design embroidered on driver and passenger side Grey detail stitching Retains OE fittings for simple installation

Read more less