Airtec Shop

This simple bolt-on modification is designed to maximise air flow, as it fits directly to the turbo and features a much larger diameter, freer flowing design compared to the more restrictive OEM elbow. Made from lightweight aluminium and finished in high-quality powder coat black finish, the elbow comes with new O-rings and is a direct replacement part that also enhances induction noise.  The kit also features a Pro Hoses silicone intake pipe in black, as well as jubilee clips.  Designed to work in conjunction with the original intake as well as our AIRTEC Motorsport induction kit in order to make the very most of the larger pipe work, the enlarged elbow removes the last restriction from the entire intake side.  Features: Larger internal diameter and improved flow to the turbo Increased flow for more power and enhanced induction noise  Fits both original intake and AIRTEC Motorsport indecution kit  Direct replacement part with simple installation  Made from lightweight aluminium construction Finished in high-quality powder coat black finish Pro Hoses silicone intake pipe included with jubilee clips Supplied with new O-rings and fitting instructions AIRTEC part no: ATMSVAG22

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet upgrade for the S55 engine fitted with hybrid turbos. A direct replacement part that offers increases in performance and response, the enlarged turbo inlets feature a freer-flowing design with an increased internal diameter, which is essential when fitting hybrid turbos. How it works  The original elbows from the air boxes are made from plastic and gradually taper down from 80mm to just 54mm and then 41mm as they enter the turbos. Whilst this is adequate for standard turbo cars, when fitting hybrid turbos, which consume more air, the original elbows can cause an unnecessary restriction that hampers flow when pushing for more power. Our AIRTEC Motorsport direct replacement inlets have been designed in-house to feature pipework that very gently tapers to 64mm in diameter as they reach the turbo inlet, therefore removing the stepped restriction and allowing the maximum amount of internal flow, with increases of nearly 35% compared to standard. The elbow upgrade includes pipework for both front and rear turbos and includes all fixtures and fittings. PLEASE NOTE: We recommend these are fitted at the same time the hybrid turbos are installed and therefore do not provide fitting instructions for this product. Features: · Designed to fit hybrid turbo upgrades · Up to 35% increase in diameter · Larger, freer-flowing design · Improves air flow to the turbo · Increases throttle response · Direct replacement fitment · Includes all fixtures and fittings Registered Design Right number: Application Pending AIRTEC part no: ATMSBMW15

Read more less

THIS IS FOR LEFT HAND DRIVE As part of our expanding Audi product range, AIRTEC Motorsport are proud to launch our cast turbo elbow for the RS3 8V kit for fast road or track use. The bottle neck of the 2.5 TFSI engine is the turbo elbow, which reduces down in diameter massively as it passes down behind the engine to the turbo. Our approach to improving this focused on making the very most of the available space and as a result, our in-house design engineer team were able to create an elbow design that is unrivalled on the market for it’s increase in diameter and improvement in flow. Featuring a 4″/102mm inlet, the elbow gently tapers down with no aggressive step to ensure optimum flow from start to finish with a substantially increased volume over standard. As a result, the AIRTEC Motorsport enlarged elbow measures a huge 8,171mm² at its widest cross-sectional measurement, compared to the original pipe’s 5,026mm² at its widest point, therefore offering a huge increase of 62.5%. On average, it’s 30% larger internally compared to the standard elbow, offering a huge increase in capacity.  This improves throttle response and reduces restriction, which is key for those chasing increased power from their cars. A direct replacement part, the elbow is made from high-quality cast aluminium and has been designed to work with other our own AIRTEC Motorsport induction it (similar sized induction kits should also fit). To fit the right-hand drive models, an indentation has been introduced to allow clearance for the brake master cylinder. The elbow comes with detailed fitting instructions and is designed to work with both standard turbos and various types of hybrid turbos, thanks to a range of machined flanges (62.8mm and 65.7mm) that come with the kit. The comprehensive package also includes a Pro Hoses replacement silicone breather hose and vacuum line, a new O-ring and all fixtures and fittings required for installation. Finished in powder coated black with a AIRTEC Motorsport cast logo, these uprated elbows offer a great benefit for modified RS3 8V owners. Will also fit Audi TTRS (8S) and RS3 (8V and 8Y) 2017 onwards. Features: Huge 62.5% increase in internal capacity 30% larger internally on average compared to original Smooth angle design to improve flow Improves throttle response and reduces restriction High-quality cast aluminium construction Works with both standard turbos and various hybrid turbos Available for both Left-Hand and Right-Hand Drive Powder coat black finish Direct replacement part Comprehensive fitting guide included

Read more less

As part of our expanding Audi product range, AIRTEC Motorsport are proud to launch our cast turbo elbow for the RS3 8V kit for fast road or track use. The bottle neck of the 2.5 TFSI engine is the turbo elbow, which reduces down in diameter massively as it passes down behind the engine to the turbo. Our approach to improving this focused on making the very most of the available space and as a result, our in-house design engineer team were able to create an elbow design that is unrivalled on the market for it’s increase in diameter and improvement in flow. Featuring a 4″/102mm inlet, the elbow gently tapers down with no aggressive step to ensure optimum flow from start to finish with a substantially increased volume over standard. As a result, the AIRTEC Motorsport enlarged elbow measures a huge 8,171mm² at its widest cross-sectional measurement, compared to the original pipe’s 5,026mm² at its widest point, therefore offering a huge increase of 62.5%. On average, it’s 30% larger internally compared to the standard elbow, offering a huge increase in capacity. This improves throttle response and reduces restriction, which is key for those chasing increased power from their cars. A direct replacement part, the elbow is made from high-quality cast aluminium and has been designed to work with other our own AIRTEC Motorsport induction it (similar sized induction kits should also fit). To fit the right-hand drive models, an indentation has been introduced to allow clearance for the brake master cylinder. The elbow comes with detailed fitting instructions and is designed to work with both standard turbos and various types of hybrid turbos, thanks to a range of machined flanges (62.8mm and 65.7mm) that come with the kit. The comprehensive package also includes a Pro Hoses replacement silicone breather hose and vacuum line, a new O-ring and all fixtures and fittings required for installation. Finished in powder coated black with a AIRTEC Motorsport cast logo, these uprated elbows offer a great benefit for modified RS3 8V owners. Will also fit Audi TTRS (8S) and RS3 (8V and 8Y) AND RSQ3 F3 2017 onwards. Features: Huge 62.5% increase in internal capacity 30% larger internally on average compared to original Smooth angle design to improve flow Improves throttle response and reduces restriction High-quality cast aluminium construction Works with both standard turbos and various hybrid turbos Available for both Left-Hand and Right-Hand Drive Powder coat black finish Direct replacement part Comprehensive fitting guide included

Read more less

A direct replacement part that gives increases in response and sound by eliminating the internal sound resonators built into the original boost pipe from the turbo.  The manufacturer fits these resonators to reduce noise and quieten the tone, but by replacing the pipe for one without the baffled internals, flow is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The pipe is made from high-quality aluminium to fit the original fittings and is finished in powder coated black or metal silver. The installation package includes all fixtures and fittings, as well as detailed installation instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification Will fit Ford 1.6 TDCI engines including Focus MK3 1.6 & Transit M Sport Connect. Features: Increases response and sound Improves flow from turbo Direct replacement fitment High quality aluminium construction Powder coat black or metal silver finish Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSFO70

Read more less

As part of our expanding VAG product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the MQB Evo engine (300-320ps), suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow features a constant 80mm diameter throughout, which limits flow and capacity. Our AIRTEC Motorsport direct replacement kit features a cast aluminium elbow and Pro Hoses silicone hose with a larger 90mm diameter throughout, until it tapers down to meet the 80mm air box, which offers a 27% increase in cross sectional area. The increased volume and improved design works to reduce restriction and improve flow to the turbo, providing an increase in throttle response. The elbow upgrade includes all fixtures and fittings, as well as detailed instructions. Dimensions:OEM Turbo Elbow:Diameter: 80mmCross sectional area: 5,027mm² AIRTEC Motorsport Turbo Elbow:Diameter: 90mmCross sectional area: 6,362mm² Fitment:Audi S3 8Y – 2020 onwardsCupra Leon Mk4 300 TSI FW – 2020 onwardsCupra Formentor 310PS – 2020 onwardsVW Arteon R 2.0 TSI 320ps – 2020 onwardsVW Golf Mk 8 GTI Clubsport – 2020 onwardsVW Golf Mk8 R – 2020 onwardsVW Tiguan II R 2.0 TSI 320ps – 2020 onwards Features: 27% increase in cross sectional area Smoother, freer-flowing design Improves airflow to the turbo Increases throttle response Direct replacement fitment Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSVAG10

Read more less

A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. AIRTEC Part No: ATMSYGR08 TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow gradually tapers down from the 63mm induction pipe to just 48.5mm as it enters the turbo, despite the turbo’s inlet measuring 51mm in diameter. This causes an unnecessary restriction within the intake side that hampers flow and limits throttle response. Our AIRTEC Motorsport direct replacement elbow features a CNC-machined flange with a correctly matched 51mm diameter, therefore removing the stepped restriction. The high-quality silicone hose instantly tapers to meet the 63mm diameter intake, therefore allowing the maximum amount of internal flow with increases of nearly 10%. The elbow upgrade includes all fixtures and fittings, as well as detailed instructions. The increased volume and improved design works to reduce restriction and improve flow to the turbo, providing an increase in power and response. Please note: this part will not fit with a Turbosmart uprated blow-off valve in place.  Specification: Up to 10% increase in bore size Larger, freer-flowing design Improves airflow to the turbo Increases throttle response Direct replacement fitment Includes all fixtures and fittings Features detailed fitting guide   AIRTEC Part No: ATMSYGR08

Read more less

AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK8 Type R A direct replacement part that offers increases in performance and response as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. AIRTEC part no: ATMSFK803 TECHNICAL DATA AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK2 & FK8 Type R. As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a 10mm larger inlet, wider outlet and increased overall internal volume to reduce restriction and improve flow to the turbo. Made from high quality cast aluminium for a factory look and feel, the larger pipe also features a cast AIRTEC logo in silver and powder-coated black finish for a subtle OEM+ look. The kit includes a silicone reducer to use with a standard air box as well as a straight silicone connector to use with an uprated induction kit, such as our AIRTEC Motorsport kit. The comprehensive installation kit includes all fixtures and fittings and detailed instructions. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification.   Dimensions: Civic OEM induction pipe IN: 62mm OUT: 59mm AIRTEC Motorsport induction pipe IN: 72mm OUT: 60mm   Specification: Direct replacement part Made from high quality cast alloy AIRTEC cast logo in silver Powder-coated black finish Improves air flow to the turbo Increases mid-range performance Includes all fixtures and fittings Features detailed fitting guide Fits both, FK2 & FK8 Civic Type R. Registered Design Right: 6154867 AIRTEC part no: ATMSFK803

Read more less

Designed to replace the restrictive OEM pipe, this 10mm larger silicone elbow and alloy connector offers increased flow. By reducing restriction within the induction system, air flow improves and potential power increases can be released. The elbow is carefully engineered to be a direct replacement item, which ensures a simple installation process and comes with a gloss black Pro Hoses silicone hose, as well as all fixtures and fittings. Please note: fits PRE-FACELIFT (2017 to 2021) Features: 10mm larger internal diameter than stock Improved air flow for increased power CNC machined Simple DIY installation Direct replacement Enhanced sound Pro Hoses silicone connector Registered Design Right number: 6093143 AIRTEC part no: ATIKHYU2

Read more less

The Ultimate alloy Turbo top induction pipe Mirror finish , the ultimate finishing touch to any engine bay! Now available in 3 different finishes, Pro-Series Satin Black, Polished Silver and the new Satin Silver (Motorsport Style Finish) Fitting takes about 20-30 minutes Registered Design Right number: 6033438

Read more less

  Big boost pipe kit for the Fiesta ST 180. The kit includes: 3 hard pipes, 4 Pro Hose silicone hoses & free jubilee clips. This kit is designed for the modified fiesta ST 180. All pipes have swayed  ends to stop the pipes blowing off. Now only supplied WITHOUT SYMPOSER take off. Please note: If fitting with the AIRTEC Motorsport Stage 2 intercooler, please make a note in the shipping notes – Additional hose required.     2.5" bore pipework. only available in black pipe and black hose Will fit Fiesta ST 200

Read more less

AIRTEC Fiesta ST 180 top induction pipe. Replace your standard Fiesta ST 180 plastic top induction pipe with our AS performance alloy top pipe. Available in Pro Series Black or Satin Silver. Can be fitted with our Stage 2 induction kit. Choose from a wide range of silicone hose colour. Please note: Custom colours are made to order, please expect a 5-7 day delay on custom colours. Peak show times may be a longer 7-10 day delay. WILL FIT ST180 & ST 200.

Read more less

AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh) Features: High quality hard pipe Easy to fit Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).

Read more less

Help your 1.0 EcoBoost get a much Air into the engine as possible! Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2  Features Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Increased induction noise AIRTEC induction kit recommended Fits: MK7 Fiesta 1.0 EcoBoost All Models MK3 Focus 1.0 EcoBoost All Models MK8 Fiesta 1.0 EcoBoost All Models (Front Turbo Only)

Read more less