All

2.0 TSI Oil CoolerFor EA888 gen.3 & gen.4 engines Because cooler oil means a better protected engine. The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine. Why fit anOil Cooler Kit? Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB 'Evo' 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.   Adding power to these 2.0 TSI engines generates more heat to disperse.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect. Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 - 20  degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system. As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. Supplied as a complete kit with every part ready for install. HIGH EFFICIENCY COOLER Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminium pressed plates. Heat dissipates as cold air moves across the plates. PRESSURE CONTROL Our unique sandwich plate oil take-off includes a clever internal pressure-control valve control to direct oil flow through the cooler at correct flow/volume. PRECISION MACHINED Precision machined billet components utilising the latest 5 Axis CNC machines for perfect accuracy, first time, every time.  210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience. Protective external sheath avoids any rubbing damage in use.   COLD AIR LOCATION The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funnelled out efficiently. HIGH-FLOW FILTER The kit includes a pretty special high-flowing oil filter. Made from stainless steel micronic filter cloth with magnetic pre-filtering, capable of flowing 5x more oil than the factory paper filter.  CONFIRMED APPLICATIONS VWR18G700 > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ NOTE: 2015 AND OLDER CARS MAY ALSO REQUIRE FITMENT OF VWG PART 06L115678Q (A PLASTIC OIL STEM INSERT). THIS IS A RUNNING UPGRADE FROM VWG DEALERS SO MOST CARS WILL HAVE HAD THIS PART UPDATED DURING EARLIER OIL CHANGES.

Read more less

2.0 TSIOil management system& catch can for 2.0 TSI EA888.3 If you're going to take your MQB car on track, you really need our 2.0 TSI Oil Catch Can Oil Management Kit. Without it, you'll risk oil starvation.Simple as that. How doesit work? Not all catch tank kits are equal. Designed with a built in engine baffle plate, our system is uniquely designed to aid engine oil control, as well as catching unwanted oil and water vapour. The 2.0 TSI EA888.3 retains oil in the engine under excessive braking G-forces. Oil pools at the front of the engine, leading to smoke clouds and ultimately oil starvation.  3 way baffled catch tank to effectively  collect excess moisture and oil vapour. Keeps your intercooler and inlet tracts clear of oil build-up and provides clean airflow through the inlet manifold. DIRECT PCV REPLACEMENT Our catch tank kit is supplied complete with a replacement PCV plate offering easy installation. 210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.   SUPERIOR BAFFLE SYSTEM A built in baffle plate prevents oil surging to the cylinder head and making its way into the intake - or worse, starving the engine. CATCH TANK Not just a tank, but a three way inner division ensures separation of moisture and oil.  PRECISION MACHINED Precision machined components utilising the latest 5 Axis CNC machines. POLISHED SWIVEL FITTINGS Racingline fittings are all hand polished before anodising for the ultimate finish and limits the chances of "spanner rash" PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC technology. AN-10 male fitting for main breather line. Removable baffle plate for easy maintenance Sealing gasket against the PCV replacement plate. CONFIRMED APPLICATIONS VWR13G700 > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ * For 2019 Golf GTI only a new evaporation canister which obstructs the catch can fitment. ​ You will need to purchase Volkswagen part 5Q0133366K to allow fitment

Read more less

2.0 TSI & 2.0 TDIHigh-FlowPanel Air Filter. Set your MQB & MQB 'Evo' 2.0 TSI, 1.8 TSI or 2.0 TDI engine free by allowing it to breathe better and operate more efficiently.VWR11G701 What doesit do? Looking for a simple, warranty-friendly upgrade for your car? ​ Our High-Flow Panel Air Filters, available for all Volkswagen Group 'MQB' 2.0 TSI, 1.8 TSI & 2.0 TDI cars, replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow.  By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo.    TRIFOAM® FILTER Our unique Trifoam® filter construction allows us to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty PETROL/GAS ENGINES All MQB/MQBE 1.8 & 2.0 TSI DIESEL ENGINES All MQB/MQBE 2.0 TDI   Confirmed applications. VWR11G701All MQB / MQB 'Evo' VW / AUDI / SEAT / CUPRA / SKODA2.0 TSI EA888.3 & EA888.41.8 TSI EA888.32.0 TDI EA288 & EA189 > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Golf 7 & 7.5 2.0 TDI / GTD 2013-2020 > VW Passat 2.0 TDI B8 2015+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TDI 2017+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW T-Roc 2.0 TDI 2017+ > VW Tiguan II 2.0 TDI 2016+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi A3 8V 2.0 TDI 2013-2020 > Audi TT 2.0 TDI 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > Audi Q2 2.0 TDI 2017+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > SEAT Leon III 2.0 TDI 5F 2013-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Ateca 2.0 TDI 2016+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Octavia III vRS 2.0 TDI 5E 2014-2020 > Skoda Octavia III 5E 2.0 TDI 2014-2020 > Skoda Superb III 2.0 TDI 3V 2015+ > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

REAR BODY BRACE Want to sharpen up your Golf 7 & 7.5 handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. WHAT DOES IT DO? Modern cars like the Golf 7 & 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why the Clubsport S Golf gets a factory rear brace.  The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible. Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace. LOW PROFILE Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation. EASY INSTALL/REMOVE Clever design means fitting is quick and simple. Completely reversible without trace for removal.  NO DRILLING No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify. PRACTICAL Compatible with rear seats up or down, and we've even added in the luggage tie-downs into the mounting points. LIGHTWEIGHT A ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars. ADJUSTABLE Every mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car. CONFIRMED APPLICATIONS VOLKSWAGEN, SEAT/CUPRA, SKODA: MQB & MQB 'EVO'VWR81G700GOLF 7 & 7.5    3 DOOR GOLF 7 & 7.5    5 DOOR GOLF 7 & 7.5    WAGON/VARIANT *4Motion wagon models only  GOLF 8    5 DOOR SEAT Leon III    3 DOOR SEAT Leon III    5 DOOR SEAT Leon III    ST WAGON/VARIANT *4Motion wagon models only  SEAT Leon IV    5 DOOR Skoda Octavia III    5 DOOR Skoda Octavia III   WAGON  Skoda Octavia IV    5 DOOR

Read more less