Performance - Cupra Formentor (2020-Present)

Purpose-designed for the 2.0 TSI MQB 'Evo' engine, this is the largest-volume intercooler available for this platform. What it does.The factory intercooler on the 2.0 TSI MQB 'Evo' has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System uses a huge 70mm core to give a 96% volume increase over the factory cooler - making it the largest volume and best performing intercooler upgrade on offer for the 2.0 TSI gen.4. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.  Increased 70mm inlet and outlet sizes allow for higher flow versus the 60mm factory outlets, with matching Boost Hoses provided with the intercooler kit. Unlike most aftermarket intercoolers listed for the MQB 'Evo' platform, ours has been designed exclusively for the 2.0 TSI Gen.4 from the ground-up. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a 70mm high-speed core using extra tall internal tubes for maximum boost flow and a massive 96% increase in volume. BOOST HOSES INCLUDED Internally-wired OEM fitment 70mm boost hoses are included, multi-ply to resist heat deformation and burst pressure. Supplied with stainless steel Mikalor-brand clamps. FLOWED END TANKS Cast construction end tanks for minimal turbulence and restriction use internal flow guides to divert airflow up and down across the entire core depth, with enlarged 70mm inlet & outlet. Confirmed applications. 2.0 TSI MQB Evo / EA888 Gen 4 engines only VWR141000 > VW Golf 8 & 8.5 GTI 2020+ > VW Golf 8 & 8.5 GTI Clubsport 2020+ > VW Golf 8 & 8.5 R 2020+ > VW Arteon 2.0 TSI EA888.4 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI EA888.4 2021+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+ > Audi A3 2.0 TSI 8Y & 8Y.2 2020+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Audi SQ2 (facelift EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+ > Cupra Leon 4 & 4.5 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia 4 & 4.5 vRS 2.0 TSI 245ps NX 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+   Precision Engineered forPerfect Performance. Giant core volume of 19,404,000mm³ vs 9,895,200mm³ for the factory cooler core Internal flow guides to optimise internal air flow via cast end-tanks Sophisticated 'Plate & Bar' construction outperforms the cheaper, less-effective 'Tube & Fin' construction Multi-ply, reinforced Boost Hoses are moulded with internal steps to maximise laminar airflow Intercooler outlets are 70mm vs 60mm for the OE cooler for increased flow Intercooler Performance.It's all about air intake temperatures. The OEM factory intercooler on the 2.0 TSI MQB 'Evo' struggles with containing the all-important air intake temperatures, especially once power is upgraded. So, intake air temperatures begin to rise rapidly, heat soak occurs, resulting in significant power losses the harder the car is used. The only way to recover the performance of the standard intercooler is to park the car for an hour. With a 70mm core-depth (vs 60-65mm for most other aftermarket intercoolers) and giant internal volume, the RacingLine Intercooler makes a great difference in controlling IAT temperatures, meaning that your power increases keep on delivering, run after run. Intercooler fitment. To accommodate the giant size of the RacingLine Intercooler, some light trimming of the black plastic radiator carrier is required.   This trimming is minimal on popular models such as the Golf mk8, but more may be required on some other MQB 'Evo' models.   For reference, fitment is designed for radiator carrier –  VW Part No. / 5H0 805 588 J

Read more less

Racingline Performance Silicone Boost Hose Set EA888 Gen4The RacingLine Gen.4 Boost Hose package is a three-piece kit to replace the factory soft flexible rubber hoses and replace them with our beautiful reinforced silicone replacement versions. The kit is a direct OEM replacement: simply remove the factory hoses, and replace them with the three uprated silicone pipes. Simple.Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus other non-stepped designs.Of course the RacingLine hoses are pressure tested far beyond the turbo’s capabilities, allowing the system to maintain performance under extreme temperature and high-boost conditions. By minimising these restrictions, the smoother airflow and optimised hose routing ensures that the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence.Within the kit, the two Intercooler Boost Hoses have unique steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.A great upgrade for any remapped 2.0 TSI EA888 gen.4 car running higher boost than standard. Compatible with the following Vehicles:  > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2021+> Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi TT 45 TFSI 2.0 TSI 8S 2021+> Audi SQ2 2.0 TSI EA888.4 2021+> Cupra Leon IV 300 TSI FW 2020+> Cupra Leon IV 245 TSI FW 2020+> Cupra Ateca 300PS EA888.4 2021+> Cupra Formentor 310PS 2020+> Cupra Formentor 245PS 2020+> Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Superb III 3V 2.0 TSI EA888.4 2020+> Skoda Kodiaq vRS 2.0 TSI EA888.4 2021+

Read more less

Upgraded Boost Pipe Kit.For all VWG MQB 2.0 TSI EA888 gen.4for higher output 300/310/320/333PS Continental TurboVWR140013 The RacingLine Boost Pipe Kit for 2.0 TSI MQB 'Evo' gen.4 (Continental turbo) delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes.For Golf mk8 R, GTI CS, Audi S3, Cupra Leon & Formentor & many more. This 3-piece RacingLine GEN.4 Boost Pipe kit for 2.0TSI EA888.4 high-output Continental turbo MQB 'Evo' cars deliver smooth, uninterrupted airflow to increase power and torque, replacing the restrictive failure-prone factory boost pipes. By promoting increased airflow throughout the charge flow path, along with removing boost-leak weak points, performance and reliability gains are guaranteed! The RacingLine Boost Pipe kit for 2.0 TSI gen.4 MQB "evo' delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes on all EA888 gen.4 higher output Continental turbo cars. The 3-piece Boost Pipe kit replaces the factory pipework between the turbocharger, the intercooler, and the throttle body with one-piece, mandrel-bent 6000 series aluminium tubes with thin wall 60mm OD for maximum smooth air flow. It’s by minimising the restrictions of the factory pipes and optimising the routing that this increased airflow is achieved. As well as giving enhanced turbocharger sound and faster spool, fitment of these Boost Pipes ensures that the turbo meets less resistance thus allowing it to perform more effectively - moving a larger volume of air and minimising turbulence. The RacingLine Boost Pipe Kit comprises three separate pieces. Two mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body chargepath, plus a reinforced turbo outlet Silicone Hose for the turbo outlet. The Boost Pipes themselves are formed from single piece, mandrel-bent 6000 series aluminium tube with thin wall 60mm OD. The silicone hose is hand-wound multi-ply over internal wire reinforcement, ensuring resistance to both heat and deformation. Meanwhile, barbed ends on the pipes ensure no risk of blow off, even under extreme boost pressure conditions. As you’d expect from RacingLine, each pipe is hand polished then anodised black with laser etched logos as the finishing touch - to look great in your engine bay, and stay looking great. As with all RacingLine products, perfect fitment is a priority. So, all the mounting brackets are carefully TIG welded to ensure dimensional perfection. And within each kit, RacingLine include a stainless steel Mikalor-brand clamp, OEM rubber mounting bobbins and new bolts to make sure you achieve the perfect installation. Install is direct OEM-replacement and requires no additional drilling or cutting to fit - meaning install is fully reversible. Finally, the Boost Pipes can be used with either factory rubber hoses or, for best results we'd highly recommend pairing them with the RacingLine Gen.4 Boost Hose Kit (VWR140006) APPLICATIONS:2.0 TSI / EA888 Gen.4 enginesContinental Turbo 300-333PSVWR140013 > VW Golf 8 & 8.5 R 2020+> VW Golf 8 & 8.5 GTI Clubsport 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+> Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+> Audi SQ2 (EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+> Cupra Ateca 300ps (EA888.4) 2021+> Cupra Formentor 310ps 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+  The RacingLine Boost Pipe Kit has three pieces: smooth aluminium mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body airflow, plus a reinforced turbo outlet Silicone Hose:      

Read more less

Product Description FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity. Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing. Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area. The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%. Why do we test different cores? Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.  Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures. Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.     After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C at 6548 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C at 6508 RPM. These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use your car for fast road or have a high-performance tune in a hot climate, this product is essential.  Why do we try to decrease IAT's? (Inlet Air Temperature) Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. ​​​​ The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.

Read more less

RACINGLINE R600 EVO COOLANT UNDERHOSE Our R600 EVO Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look R600 EVO COOLANTUNDERHOSE PIPEFor VWG 2.0TSI EA888.4 (excluding Golf mk8 R)   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced 4-ply reinforced silicone to withstand the high pressures of the coolant system Inner Flouro lining to be compatible with G12 and G13 coolant fluid used on MQB cars Precision moulded to retain the perfect shape for the life of the car Temperature-resistant premium grade silicone rubber will exceed any possible coolant temperatures and keep its rigidity CONFIRMED APPLICATIONS VWR17 G8R600  FOR CARS WITH R600 INTAKE FITTED > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+

Read more less

  Prestone Ready To Use Coolant/Antifreeze 1ltr (Can mix with any colour) Prestone Antifreeze is a high quality, universal coolant suitable for various vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features:> Prevents overheating during the summer, and avoids freezing during the winter Can be used in ANY Passenger vehicle (Petrol or Diesel) Can be mixed with ANY existing colour antifreeze 5 Year guarantee Prestone 4ltr Ready to use Universal Antifreeze Prestone Antifreeze is a high quality, universal coolant suitable for varius vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features: - Prevents overheating during the summer, and avoids freezing during the winter - Can be used in ANY Passenger vehicle (Petrol or Diesel) - Can be mixed with ANY existing colour antifreeze - 5 Year guarantee

Read more less

TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

Read more less

TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 1Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements. TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 5Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Orange Concentrated Antifreeze/Coolant - 1ltr   TRIPLE QX Orange Concentrated Antifreeze/Coolant - 5ltr  

Read more less

TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 1ltr TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 5ltr Full organic long life coolant, 1-2-Ethanediol based Organic acid technology formula. Ethanediol based coolant, silicate, boron, phosphate, nitrite and amine free, which is a multipurpose long life formulation dedicated to engine which require . Dex-Cool coolant Recommended in engine cooling circuit which needs GM6277M norm   

Read more less

TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection upto -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements. TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 5Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection up to -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. ·       Stainless Steel Rivets·       Stainless Steel Fasteners·       Carbon fabric Outer Shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature silica fabric The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers: AudiA1A1 (8X) 2010-20181.4 TSI 2015 OnwardsA31.4 TSI/TFSI 2015 Onwards (8V)S32.0 TSI (8V Chassis)S4B9TTSMk3 8S 316bhp (late 2022-)CupraAteca(up to 2020)Formentor2.0 TSI (310 BHP)SeatIbizaMk4.5 (6P) 2015-20171.4 TSILeonMk3 2012-20201.4 TSI 125/140/150 BHP 2014-2019Cupra 280/290/300RSkodaSuperb280 4x4 DSGVolkswagenArteon(2017-2020)(2020-)GolfMK71.4 TSI 125BHP/138BHP/150BHPGTIGTI Clubsport ED40RMK7.51.4 TSI 138BHP/150BHPGTI RMK8RJettaMK6 (2010-2018)1.4 TSIMK7 (2018-2021)1.4 TSI2.0 GLIMK7.5 (2021-)2.0 GLIPoloGTI 2.0 2018-2020 AW ChassisT6T6 (2015-2019)2.0 TSITiguan2.0 TSI 2017 OnwardsR 2022 Onwards (Gen 4) Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

2.0 TSI Oil CoolerFor EA888 gen.3 & gen.4 engines Because cooler oil means a better protected engine. The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine. Why fit anOil Cooler Kit? Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB 'Evo' 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.   Adding power to these 2.0 TSI engines generates more heat to disperse.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect. Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 - 20  degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system. As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. Supplied as a complete kit with every part ready for install. HIGH EFFICIENCY COOLER Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminium pressed plates. Heat dissipates as cold air moves across the plates. PRESSURE CONTROL Our unique sandwich plate oil take-off includes a clever internal pressure-control valve control to direct oil flow through the cooler at correct flow/volume. PRECISION MACHINED Precision machined billet components utilising the latest 5 Axis CNC machines for perfect accuracy, first time, every time.  210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience. Protective external sheath avoids any rubbing damage in use.   COLD AIR LOCATION The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funnelled out efficiently. HIGH-FLOW FILTER The kit includes a pretty special high-flowing oil filter. Made from stainless steel micronic filter cloth with magnetic pre-filtering, capable of flowing 5x more oil than the factory paper filter.  CONFIRMED APPLICATIONS VWR18G700 > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ NOTE: 2015 AND OLDER CARS MAY ALSO REQUIRE FITMENT OF VWG PART 06L115678Q (A PLASTIC OIL STEM INSERT). THIS IS A RUNNING UPGRADE FROM VWG DEALERS SO MOST CARS WILL HAVE HAD THIS PART UPDATED DURING EARLIER OIL CHANGES.

Read more less