Performance - Cupra Formentor (2020-Present)

Racingline Performance Silicone Boost Hose Set EA888 Gen4The RacingLine Gen.4 Boost Hose package is a three-piece kit to replace the factory soft flexible rubber hoses and replace them with our beautiful reinforced silicone replacement versions. The kit is a direct OEM replacement: simply remove the factory hoses, and replace them with the three uprated silicone pipes. Simple.Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus other non-stepped designs.Of course the RacingLine hoses are pressure tested far beyond the turbo’s capabilities, allowing the system to maintain performance under extreme temperature and high-boost conditions. By minimising these restrictions, the smoother airflow and optimised hose routing ensures that the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence.Within the kit, the two Intercooler Boost Hoses have unique steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.A great upgrade for any remapped 2.0 TSI EA888 gen.4 car running higher boost than standard. Compatible with the following Vehicles:  > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2021+> Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi TT 45 TFSI 2.0 TSI 8S 2021+> Audi SQ2 2.0 TSI EA888.4 2021+> Cupra Leon IV 300 TSI FW 2020+> Cupra Leon IV 245 TSI FW 2020+> Cupra Ateca 300PS EA888.4 2021+> Cupra Formentor 310PS 2020+> Cupra Formentor 245PS 2020+> Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Superb III 3V 2.0 TSI EA888.4 2020+> Skoda Kodiaq vRS 2.0 TSI EA888.4 2021+

Read more less

Upgraded Boost Pipe Kit.For all VWG MQB 2.0 TSI EA888 gen.4for higher output 300/310/320/333PS Continental TurboVWR140013 The RacingLine Boost Pipe Kit for 2.0 TSI MQB 'Evo' gen.4 (Continental turbo) delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes.For Golf mk8 R, GTI CS, Audi S3, Cupra Leon & Formentor & many more. This 3-piece RacingLine GEN.4 Boost Pipe kit for 2.0TSI EA888.4 high-output Continental turbo MQB 'Evo' cars deliver smooth, uninterrupted airflow to increase power and torque, replacing the restrictive failure-prone factory boost pipes. By promoting increased airflow throughout the charge flow path, along with removing boost-leak weak points, performance and reliability gains are guaranteed! The RacingLine Boost Pipe kit for 2.0 TSI gen.4 MQB "evo' delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes on all EA888 gen.4 higher output Continental turbo cars. The 3-piece Boost Pipe kit replaces the factory pipework between the turbocharger, the intercooler, and the throttle body with one-piece, mandrel-bent 6000 series aluminium tubes with thin wall 60mm OD for maximum smooth air flow. It’s by minimising the restrictions of the factory pipes and optimising the routing that this increased airflow is achieved. As well as giving enhanced turbocharger sound and faster spool, fitment of these Boost Pipes ensures that the turbo meets less resistance thus allowing it to perform more effectively - moving a larger volume of air and minimising turbulence. The RacingLine Boost Pipe Kit comprises three separate pieces. Two mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body chargepath, plus a reinforced turbo outlet Silicone Hose for the turbo outlet. The Boost Pipes themselves are formed from single piece, mandrel-bent 6000 series aluminium tube with thin wall 60mm OD. The silicone hose is hand-wound multi-ply over internal wire reinforcement, ensuring resistance to both heat and deformation. Meanwhile, barbed ends on the pipes ensure no risk of blow off, even under extreme boost pressure conditions. As you’d expect from RacingLine, each pipe is hand polished then anodised black with laser etched logos as the finishing touch - to look great in your engine bay, and stay looking great. As with all RacingLine products, perfect fitment is a priority. So, all the mounting brackets are carefully TIG welded to ensure dimensional perfection. And within each kit, RacingLine include a stainless steel Mikalor-brand clamp, OEM rubber mounting bobbins and new bolts to make sure you achieve the perfect installation. Install is direct OEM-replacement and requires no additional drilling or cutting to fit - meaning install is fully reversible. Finally, the Boost Pipes can be used with either factory rubber hoses or, for best results we'd highly recommend pairing them with the RacingLine Gen.4 Boost Hose Kit (VWR140006) APPLICATIONS:2.0 TSI / EA888 Gen.4 enginesContinental Turbo 300-333PSVWR140013 > VW Golf 8 & 8.5 R 2020+> VW Golf 8 & 8.5 GTI Clubsport 2020+> VW Arteon R 2.0 TSI 320ps 2020+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y & 8Y.2 2020+> Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+> Audi SQ2 (EA888.4) 2021+ > Cupra Leon 4 & 4.5 300 TSI FW 2020+> Cupra Ateca 300ps (EA888.4) 2021+> Cupra Formentor 310ps 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+  The RacingLine Boost Pipe Kit has three pieces: smooth aluminium mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body airflow, plus a reinforced turbo outlet Silicone Hose:      

Read more less

RACINGLINE R600 EVO COOLANT UNDERHOSE Our R600 EVO Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look R600 EVO COOLANTUNDERHOSE PIPEFor VWG 2.0TSI EA888.4 (excluding Golf mk8 R)   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced 4-ply reinforced silicone to withstand the high pressures of the coolant system Inner Flouro lining to be compatible with G12 and G13 coolant fluid used on MQB cars Precision moulded to retain the perfect shape for the life of the car Temperature-resistant premium grade silicone rubber will exceed any possible coolant temperatures and keep its rigidity CONFIRMED APPLICATIONS VWR17 G8R600  FOR CARS WITH R600 INTAKE FITTED > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+

Read more less