Performance - Cupra Formentor (2020-Present)

ENCLOSED MST-VW-MK888 This is a performance enhancing induction kit for the Volkswagen Golf MK8 GTi EA888 EVO4 245bhp. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Red pleated filter Silicone inlet pipe Full fitting kit with easy step by step instructions AIRBOX & SCOOP MST-VW-MK99903 This is a performance enhancing induction kit for the EA888 Gen 3 VAG engines. For a full list of compatible vehicles please see fitment compatibility chart. This is a crosslinked Roto-Molded Polythylene version of the MST-VW-MK888 Features Improved throttle response Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black heat shield Black silicone inlet pipe Red dry pleated filter Turbo inlet elbow Black air scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020+ VW Golf GTi (MK8) 2.0 TSI 2020+ AUDI A3 8Y 2.0 TSI 2020+ CUPRA LEON MK4 2.0 TSI 2020+ CUPRA FORMENTOR 2.0 TSI 2020+ SKODA OCTAVIA MK4 2.0 TSI

Read more less

As part of our expanding VAG product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the MQB Evo engine (300-320ps), suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow features a constant 80mm diameter throughout, which limits flow and capacity. Our AIRTEC Motorsport direct replacement kit features a cast aluminium elbow and Pro Hoses silicone hose with a larger 90mm diameter throughout, until it tapers down to meet the 80mm air box, which offers a 27% increase in cross sectional area. The increased volume and improved design works to reduce restriction and improve flow to the turbo, providing an increase in throttle response. The elbow upgrade includes all fixtures and fittings, as well as detailed instructions. Dimensions:OEM Turbo Elbow:Diameter: 80mmCross sectional area: 5,027mm² AIRTEC Motorsport Turbo Elbow:Diameter: 90mmCross sectional area: 6,362mm² Fitment:Audi S3 8Y – 2020 onwardsCupra Leon Mk4 300 TSI FW – 2020 onwardsCupra Formentor 310PS – 2020 onwardsVW Arteon R 2.0 TSI 320ps – 2020 onwardsVW Golf Mk 8 GTI Clubsport – 2020 onwardsVW Golf Mk8 R – 2020 onwardsVW Tiguan II R 2.0 TSI 320ps – 2020 onwards Features: 27% increase in cross sectional area Smoother, freer-flowing design Improves airflow to the turbo Increases throttle response Direct replacement fitment Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSVAG10

Read more less

RACINGLINE R600 EVO COOLANT UNDERHOSE Our R600 EVO Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look R600 EVO COOLANTUNDERHOSE PIPEFor VWG 2.0TSI EA888.4 (excluding Golf mk8 R)   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced 4-ply reinforced silicone to withstand the high pressures of the coolant system Inner Flouro lining to be compatible with G12 and G13 coolant fluid used on MQB cars Precision moulded to retain the perfect shape for the life of the car Temperature-resistant premium grade silicone rubber will exceed any possible coolant temperatures and keep its rigidity CONFIRMED APPLICATIONS VWR17 G8R600  FOR CARS WITH R600 INTAKE FITTED > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+

Read more less

2.0 TSI EA888 gen.4 Garrett Turbo 245PS Turbo Inlet SystemTurbo 90 Inlet & Silicone Inlet Hose. RACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 245PS GOLF 8 GTI, LEON CUPRA FW, AUDI A3 8Y, OCTAVIA vRS NXVWR120003 For VW, Audi, Cupra 'lower output' 245PS / 207PS (Garrett Turbo)Golf mk8 GTI, Cupra Leon, Cupra Formentor, Octavia vRS & more. Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.For the Garrett turbo (lower output) 245ps engines such as Golf 8 GTI, Cupra Leon & Formentor and Octavia vRS, plus 207ps Polo GTI AW.2 What the turbo inlet system does.  The RacingLine Turbo Inlet System for the 245PS & 207PS MQB 'EVO' cars such as Golf 8 GTI is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow.  The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 62.5mm on the factory part right up to 76mm. It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! TWO PIECE KIT It's only by combining both elements of this kit that we've been able to increase the diameter so significantly (+13.5mm) to release the true airflow gains.  POWER GAINS The ultra-thin wall High-Flow Turbo 90 Inlet features an internal velocity stack to maximise airflow capability through to the turbo's inlet. EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish.  PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced high quality silicone prevents deformation under load or heat Flexible enough to allow just the right amount of engine movement under load Internally-stepped silicone to ensure smooth transitions CNC constructed from T6-6061 aircraft grade aluminium with Viton sealing O-ring Maximum 80mm outer diameter with ultra-thin wall 2mm tube, smoothed internal bore Polished then anodised in gloss black to look good, and stay looking good. CONFIRMED APPLICATIONS For 245ps & 207PS EA888.4 (Garrett turbo) engines:VWR120003 > VW Golf 8 GTI 2020+ > VW Polo 6 GTI 2.0 TSI 207ps AW.2 2021+ > Audi A1 Competition 207ps 40TFSI GB 2021+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less