Performance - VW Golf MK5 (2003-2008)

At AIRTEC we always test our Intercoolers & Radiators to ensure maximum gains from design & core choice. Testing carried @ Devil Developments ‘Stage 1 map Devil 245’ With the Standard Intercooler fitted & Stage 1 re-map we saw power of 246.9bhp & Intake temps (Turbo charged Air Entering the Engine) of 49 degrees, 49 degrees is o.k. but this Golf only had a stg1 re-map! these temps will rise with higher stages of tune, this will mean you will start to lose power. AIRTEC TwinSpec + Standard Intercooler fitted & as before fitted with Stage1 re-map, Power was up to 261bhp! & Intake temps were as Low as 17 degrees with a peak of 21 degrees, the TwinSpec set up clearly works and easily installed under 2 hours. Fits Following models. VW Golf MK5 GTi 2.0 TFSIVW Golf MK5 GTi Edition 30 2.0 TFSI AIRTEC TwinSpec Intercooler Included parts & Features 1 x 70mm core Intercooler with shaped end tanks 2 x Twinspec 5ply silicon hose’s with stainless Jubilee clips 3 x Billet alloy machined push fittings 2 x AIRTEC logo Horn relocation brackets Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Can Be used Inconjuction with AIRTEC OEM Intercooler upgrade for even more cooling power! Available only in Pro-Series Satin Black Airtec 3 year unlimited mileage warranty NOW ONLY AVAILABLE WITH BLACK HOSES Hose colour shown for illustration purposes only Registered Design Right number: 6023454 AIRTEC part no: ATINTVAG2

Read more less

After much research, development and testing at AIRTEC HQ, our intercooler upgrade for the VW Golf GT Mk5 1.4 TSI has been added to our ever-growing range of products. Built using a high flow core to offer increased cooling efficiency and performance, we take pride ensuring all of our kits are finished to our usual high standard and premium quality. Designed in the UK and offered at a reasonable price. Great addition to any standard or re-mapped Golf. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler. High quality  silicon hoses which means better flow inside the pipe work, finished stainless Jubilee clips. Retains original crash bar Retains original fog lights No cutting to bumper If running Golf GTI fog surrounds, no cutting is required Fitting Instructions and all required fixings Proven power increase for Fast Road & Track builds Available in Pro-Series Black or Natural Silver AIRTEC 3 year unlimited mileage warranty Fitting will take 2-4 hours depending on mechanical skill Fits all MK5 1.4 Twin Charge TSi Petrol models Please note: If running Golf GTI fog surrounds, no cutting is required Approximate Dimensions Width – 740mm Height – 170mm Thick – 70mm Registered Design Right number: 6023454 AIRTEC part no: ATINTVAG24

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to it’s growing range of performance intercoolers, in the way of this upgraded intercooler for the Volkswagen Golf VI, 2.0 Common Rail Please note: This intercooler will only fit the 2.0L CR engine not PD. Great addition to any standard or re-mapped Golf. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler. High quality gloss black silicon hoses which means better flow inside the pipe work, finished stainless Jubilee clips. Retains original crash bar. Retains original fog lights. No cutting to bumper. Fitting Instructions and all required fixings. Proven Power Increase’s for Fast Road & Track. Available in Satin Black or Natural Silver. Airtec 3 year unlimited mileage warranty. Fitting will take 2-4 hours depending on mechanical skill. Fits all Mk6 CR140 Golf. This is essential for hotter climate countries. Approximate Dimensions Width – 740mm ‘not including pipe’ Height – 170mm Thick – 70mm Registered Design Right number: 6023454 AIRTEC part no: ATINTVAG21

Read more less

TECHNICAL DATA As part of our expanding Audi, SEAT, Skoda and VW TFSI product range, AIRTEC Motorsport is proud to launch our intercooler upgrade to offer increased performance through reduced charge temperatures in comparison to the original intercooler. This is particularly important to remapped examples. Our solution to replacing and improving the OEM hugely restrictive twin intercooler setup and lengthy pipework within the confines behind the bumper assembly is based upon a high flow, single-pass core design, that’s wider, taller and deeper than the original. This offers a massive increase in frontal area and a huge increase in capacity, which allows it to make the most of the air flow provided. Despite this improvement, the kit fits neatly behind the original bumper, requires no trimming or cutting, and can be reverted back to standard with no issues. The comprehensive fitting kit includes all the correct fixtures and fittings. The intercooler is available in a Pro-Series Black finish (with or without the AIRTEC logo). And with Black Gloss hoses.  Fitment: Audi A3 2.0 TFSi (197bhp, 8P) Audi S3 2.0 TFSi (265bhp, 8P) Audi A3 1.8 TFSi (8P) Audi TT 2.0 TFSi (200bhp, 8J) Mk2 Audi TTS quattro 2.0 TFSi (270bhp, 8J) Mk2 Audi TT 1.8 TFSi (160bhp FWD 8J) Mk2 SEAT Leon 2.0 TFSi (182bhp, 1P) SEAT Leon Cupra 2.0 TFSi (237bhp, 1P) SEAT Leon Cupra R 2.0 TFSi (265bhp, 1P SEAT Leon FR 2.0 TFSi (197bhp, 1P) Skoda Octavia 2.0 TFSI VW Golf GTi 2.0 TFSI (197bhp Mk5) 1K VW Golf Mk5 GTi 2.0 TFSI VW Golf Mk5 GTi Edition 30 2.0 TFSI VW Golf Mk6 GTi 2.0 TSI VW Golf R Mk6 2.0 TSI VW Scirocco 2.0 TFSI VW Scirocco 2.0 TSI VW Scirocco 2.0 R   DYNO TESTEDTested at Devil Developments rolling road – on Golf Mk5 GTI 2.0 TFSI 200ps with a Stage 1 remap. Data collected was before and after intake temperatures, and power increases. Standard intercooler:Intake Temperature: 46 degreesPower: 239.7bhp AIRTEC Motorsport intercooler:Intake Temperature: 27 degreesPower: 253.4bhp   Dimensions:Width: 450mmHeight: 900mmDepth: 55mm   Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish AIRTEC logo available at no extra charge Unbeatable value for money! Please note: silicone hoses are only available in black – pictures are purely for presentation processes.  Registered Design Right number: 6023451 AIRTEC Part No: ATINTVAG7

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less