Performance - VW Golf MK7 (2012-2020)

ST Suspension Aluminium Wheel spacer kit - For PQ35 and MQB Models - 12.5mm Per Corner- Manufactured in Germany using high quality aluminium- Set of Four 12.5mm Spacers with Bolts- Improved stance and widened track- Black anodized finish- Black Wheel Bolts Notes:The new spacer package for the VAG PQ35 and MQB is designed to bring out the OEM wheels to fill the arches, the kit consists of four 12.5mm spacer discs and four of the new revolutionary ST adapters which helps eliminate wheel wobble with its near perfect centring ability.Fits the following models with Standard OE Wheels Only: VW Golf Mk5 VW Golf Mk6 VW Golf Mk7 VW Jetta Mk5 VW Jetta Mk6 VW EOS VW Scirocco  Audi A3 8P Audi A3 8V Audi S3 8P Audi S3 8V Audi TT Mk2 Audi TT Mk3 SEAT Leon Mk2 SEAT Leon Mk3 Skoda Octavia Mk2 Skoda Octavia Mk3

Read more less

APR is pleased to present the ultimate Pendulum Mount Upgrade! The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined spherical bearing and new bolts. The system stiffens the driveline to improve shift quality and power transition. It is easy to install, addresses all concerns with the factory setup and includes all necessary hardware to bolt on and enjoy! Quick Facts: Reduces transmission movementBy removing the factory rubber bushing, the APR system reduces slop in the driveline to improve shifts, and transmission of power to the ground. Expect a sportier feel during acceleration, deceleration and gear changes without an excessive increase in NVH when paired with the factory sub-frame mount. Spherical bearingSpherical bearings offer far less unwanted movement over rubber and polyurethane inserts. As such, the APR mount uses a spherical bearing, made possible by upgrading the rear mounting hardware. The bearing is fully-serviceable, features a heat-treated race and precision-ground ball, with a self-sealing and self-lubricating PTFE lining. Billet-aluminum and Billet-stainless-steel constructionThe front and rear pieces replace the factory cast aluminum and stamped steel pieces with precisely machined, billet-aluminum and billet-stainless-steel pieces that are strong. The aluminum piece is anodized black and the stainless piece is electropolished to provide corrosion resistance and the APR logo is laser etched on each side. Replacement BoltsThe factory bolts are one-time-use, and must be replaced when installing a new mount. The APR system includes non-one-time-use bolts for their strength, quality and longevity over the factory bolts. Easy to install The system is easy to install, doesn’t require dropping the sub-frame and is compatible with the factory and factory-like modified sub-frame mounts. Full install directions are included with each system. FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise. The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will last the test of time, unlike others, and packs a limited lifetime warranty against cracking! We offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase. FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/RS3 (8V) Shop By Car/Audi/TT RS (8S) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

APR Roll-Control Front Stabiliser Bar- Diameter: 28.6mm- Construction: Weight Saving Hollow Bar- Adjustment: 2-Way Adjustable APR Roll-Control Stabiliser Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle’s inner and outer wheels during cornering. In doing so they improve the vehicle’s under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points FITS: Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

APR Roll-Control Rear Stabiliser Bar- Diameter: 25.4mm- Construction: Weight Saving Hollow Bar APR Roll-Control Stabiliser Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle’s inner and outer wheels during cornering. In doing so they improve the vehicle’s under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points FITS: Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

APR Roll-Control Front Stabiliser Bar- Diameter: 28mm- Construction: Weight Saving Hollow Bar APR Roll-Control Stabiliser Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle’s inner and outer wheels during cornering. In doing so they improve the vehicle’s under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20)

Read more less