Performance - Ford Fiesta MK8 ST (2018-2024)

The ZERONINE Design HVF (High Volume Flow) charge pipe upgrade kit for the Mk8 Fiesta ST and Puma ST removes multiple restrictions found in the OE air charge components, substantially improving airflow and reducing the pressure-drop. The OE components feature multiple highly complex sections which taper down or narrow in diameter by as much as 50% and uses a restrictive sound resonator section - all of which inhibit airflow and cause unwanted pressure buildup. The ZERONINE Design HVF version has been carefully designed as a direct swap for the OE setup and is supplied with everything needed to help increase airflow by more than 60%.Options are available to support models with (early) and without (later Mk8 Fiesta ST and all Mk8.5 Fiesta ST and Puma ST) factory re-circ valves and is finished in a durable deep black anodised finish with matching black silicone hose. A must-have addition for those wanting to improve the performance and efficiency of their engine and to give a degree of headway to the turbocharger when optimising peak engine power and torque output. Note: When installing this kit, you need to re-use the OE seal found in the standard upper hard pipe.

Read more less

TECHNICAL DATA As part of our expanding Mk8.5 Fiesta platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk8.5 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the front bumper. However, the Mk8.5 Fiesta has very limited available space directly behind the open grille area, which meant we developed an innovative solution that mounts the oil cooler in front of the right-hand side arch liner and is fed a constant flow of cool air by an air feed duct that’s included in the kit. The package also includes a AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8.5 ST models. Features: Comprehensive kit designed specially for the Mk8.5 Fiesta ST platform Reduces temperatures on track and road Front intake directs constant feed of cold air to the filter Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO139

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk8 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the front bumper. However, the Mk8 Fiesta has very limited available space directly behind the open grille area, which meant we developed an innovative solution that mounts the oil cooler in front of the right-hand side arch liner and is fed a constant flow of cool air by an air feed duct that’s included in the kit. The package also includes a AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Front intake directs constant feed of cold air to the filter Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO129

Read more less

TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

Read more less

TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 1Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements. TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 5Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Orange Concentrated Antifreeze/Coolant - 1ltr   TRIPLE QX Orange Concentrated Antifreeze/Coolant - 5ltr  

Read more less

TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 1ltr TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 5ltr Full organic long life coolant, 1-2-Ethanediol based Organic acid technology formula. Ethanediol based coolant, silicate, boron, phosphate, nitrite and amine free, which is a multipurpose long life formulation dedicated to engine which require . Dex-Cool coolant Recommended in engine cooling circuit which needs GM6277M norm   

Read more less

TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection upto -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements. TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 5Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection up to -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

Performance silicone hose kit for the Ford Fiesta Mk8 ST 200. Kit includes 2 coolant hoses. Multiple colours with CEUK logo branding (White with black outline)

Read more less

Performance silicone hose kit for the Ford Fiesta Mk8 ST 200. Kit includes 12 ancillary hoses. Multiple colours with CEUK logo branding (White with black outline)

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

VUDU Performance Hot Side Boost Pipe for Fiesta ST MK8.  **USING THE DROP-DOWN MENU ABOVE SELECT IF YOU WOULD LIKE FITTING OR NOT.** Watch VUDU Performance smash it out of the park again with this Hot Side Boost Pipe for the MK8 Fiesta ST! The latest VUDU UK product for the Ford Fiesta ST will give your hot hatch that breathing capability it requires. This pipe has been designed as a direct replacement for the restrictive OEM pipe to increase the airflow. The VUDU Hot Side Pipe produces a smoother flow of air by replacing the restrictive bends and small diameter with the much larger 2.5" pipework of the VUDU pipe. Why upgrade your Boost Pipes? The Fiesta ST has suffered from suffocation and superheating intake air to the intercooler due to its small diameter pipework. This hot-side pipe allows the air to flow much smoother due to its large aluminum-grade pipework. The stock pipes are made from rubber and constrict when under increased pressure and heat. This is why VUDU UK constructed this pipe from lightweight, sturdy aluminum. If you're looking to turn your fast ford into a rally car for the road then this should be one of the first stops you make on your tuning journey. After seeing how successful and popular the Big Boost Pipe Kit was for the MK7 ST it made sense to design a counterpart for the MK8 ST. Developed using our MK8 Fiesta ST demo car to ensure this product matches the high standard we set for all our hardware.   Key Features: Increase in airflow. Larger pipe diameter. Improved turbo noise. VUDU Deep Laser etching.   This Hot-Side Pipe works perfectly alongside the VUDU Performance Stage 3 Intercooler. The combination of these two powerhouses will give you the boost in power you are looking for! This Boost pipe is for the Hot side only and not the cold side.

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

As seen on the Fiesta ST - this will fit all models and replaces the single air feed food on the NON st models Genuine Ford Dual Air Feed As Fitted to the New Fiesta ST 1.5T EcoBoost Direct fit to 1.0 Mk8 Ecoboost Fiesta   The Fiesta Mk8 1.0 Ecoboost is fitted with a single cold air intake tube and quite restrictive when adding power. This will restrict the amount of air able to be passed to the air filter assembly and subsequently to the engine and turbo lowering any potential power output. The Mk8 ST comes with a very similar setup but with dual feeds which is a direct fit onto the 1.0 increasing that much needed Cold Air Flow. Will not fit standard 1.0 airbox - requires intake kit to be fitted.

Read more less