Performance - Ford Focus MK2 (2004-2010)

The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better! Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models. The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky. AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance. The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination. Please note, this currently only fits AIRTEC’s Group A induction kit. Kit includes: 1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black 3x Billet alloy spacers and stainless-steel fittings Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models AIRTEC part no: ATMSFO45

Read more less

Ford Focus Mk2 Facelift Bonnet Lifter Kit This kit is an extremely easy modification to make to your Focus,Replace the stock bonnet prop with the bonnet lifter kit . Designed for Focus Mk2 facelift models Kit includes: 2 x Gas-charged struts 2 x Bonnet hinge brackets 2 x Wing brackets

Read more less

AIRTEC Motorsport complete breather kit for Focus MK2 ST & RS. Designed to help reduce the risk of split diaphrams on the 2.5 turbo engine that suffers with oil filter and breather issues, common on modified cars. Includes a full fitting kit with Pro Hoses and everything ready to fit! Features: AIRTEC Motorsport breather top plate AIRTEC Motorsport oil catch can New oil filter New O-ring seals Pro Hoses silicone hose kit All fittings and fixings ready to fit Complete fitting instructions

Read more less

AIRTEC Motorsport Power Steering Tank for Focus Mk2 – with Sight Glass and Cap Made from lightweight alloy, the AIRTEC Motorsport power steering tank is a direct replacement item that replaces the standard plastic item that can become brittle over time. The tank also features a sight glass to check the level and comes complete with a cap. Finished in Pro-Series black only with a silver cap, the tank completes the aesthetic look of a Mk2 Focus engine bay perfectly. Registered Design Right number: AIRTEC part number: ATMSFO109

Read more less

Now available is our stunning performance inlet manifolds painted in the following solid colours to match your car – Gloss Black, Frozen White and Colarado Red We have taken more time than most perfecting our manifold to what you see here. We tested several designs, which include a square to tapered manifold that unfortunately didn’t work, and then our Gen2 design finally got the go ahead after months of testing. After completion, we found there was more gains to be made and instead of selling a manifold for the sake of getting sales, we held off the release while our development technicians matched the inlet manifold ports to the lower manifold ports – we felt the difference immediately. Features: Increase in BHP & Torque, expect to see gains from 5 – 10 bhp peak & 20 to 40 lb ft torque. We saw up to 25 bhp mid range gains on our tests. Heat treated for 36 hours & then pressure tested to 56 psi to ensure maximum strength Won’t crack or burst like Ford OEM plastic manifold Unique & stunning design, by far the best looking manifold available CNC Inlet ports to match lower section of the intake manifold ‘Injector side’ only one other cast manifold offers this critical design feature Value for money “You can feel the difference when fitted!” – This is what our customers are telling us time and time again. We are pleased to announce we supply a 12.5mm metal push fitting with every AS performance manifold. Registered Design Right number: 6041778 AIRTEC Part No: ATMSFO5

Read more less

Now available is our stunning performance inlet manifolds painted in the following metallic colours to match your car – Ultimate Green, Performance Blue and Electric Orange  We have taken more time than most perfecting our manifold to what you see here. We tested several designs, which include a square to tapered manifold that unfortunately didn’t work, and then our Gen2 design finally got the go ahead after months of testing. After completion, we found there was more gains to be made and instead of selling a manifold for the sake of getting sales, we held off the release while our development technicians matched the inlet manifold ports to the lower manifold ports – we felt the difference immediately. Features: Increase in BHP & Torque, expect to see gains from 5 – 10 bhp peak & 20 to 40 lb ft torque. We saw up to 25 bhp mid range gains on our tests. Heat treated for 36 hours & then pressure tested to 56 psi to ensure maximum strength Won’t crack or burst like Ford OEM plastic manifold Unique & stunning design, by far the best looking manifold available CNC Inlet ports to match lower section of the intake manifold ‘Injector side’ only one other cast manifold offers this critical design feature Value for money “You can feel the difference when fitted!” – This is what our customers are telling us time and time again. We are pleased to announce we supply a 12.5mm metal push fitting with every AS performance manifold. Registered Design Right number: 6041778

Read more less

AIRTEC Motorsport Focus Mk2 Two-Piece ECU Holder With the cost of a genuine Ford ECU cover regularly increasing, AIRTEC Motorsport are proud to launch its own direct replacement design. Made from high-quality, injection-moulded plastic and finished in smooth satin black, our two-piece holder looks and feels very similar to the genuine Ford item, but at far less cost. The intricate design means a perfect fit and features an AIRTEC cooling cut-out and embossed logo for a real OEM+ look that will compliment any Mk2 Focus ST/RS engine bay. It can be fitted with our hugely popular Focus ST Group ‘A’ filter kit, as well as other custom induction kits, and is secured in place using the original OEM fittings. AIRTEC part no: ASCOV1

Read more less

NOW WITH OPTIONAL SIGHT GLASS! Focus Mk2 Lightweight Alloy Water Header Tank replacement. Easy fit takes 20 to 30 minutes to fit, Comes with a brand New High Pressure header tank cap No Drilling required (Unlike other Alloy tanks), uses original fixing points and is a direct replacement for the original Ford plastic header tank. Why not cover up that plastic cap with a Polished stainless steel cap cover, finished in satin Black and engraved Hot Logo, grooved inside for that perfect fit.

Read more less

Focus ST225 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance. The cold air feed comes with Cold feed guide which sits just below the filter securing the trunking. Each kit comes with a 780mm piece of ducting, 1 base plate with attached ram pipe and all required bolts and fixings. PLEASE NOTE: Silver finish is for illustrative purposes only.

Read more less

Focus ST Full ECU cover for cold feed Air filter kits. in pro- series black  Covers up old ECU & also act's as a bracket for the ECU.  Comes with high voltage warning logo & information logo. Made from stainless steel, not alloy like other cheap over priced covers!

Read more less